Engineered Molecular Chain Ordering in Single‐Walled Carbon Nanotubes/Polyaniline Composite Films for High‐Performance Organic Thermoelectric Materials

Single‐walled carbon nanotubes (SWNTs)/polyaniline (PANI) composite films with enhanced thermoelectric properties were prepared by combining in situ polymerization and solution processing. Conductive atomic force microscopy and X‐ray diffraction measurements confirmed that solution processing and strong π–π interactions between the PANI and SWNTs induced the PANI molecules to form a highly ordered structure. The improved degree of order of the PANI molecular arrangement increased the carrier mobility and thereby enhanced the electrical transport properties of PANI. The maximum in‐plane electrical conductivity and power factor of the SWNTs/PANI composite films reached 1.44×10³ S cm^?1 and 217 μW m^?1 K^?2, respectively, at room temperature. Furthermore, a thermoelectric generator fabricated with the SWNTs/PANI composite films showed good electric generation ability and stability. A high power density of 10.4 μW cm^?2 K^?1 was obtained, which is superior to most reported results obtained in organic thermoelectric modules.     

Selective and Scalable Chemical Removal of Thin Single‐Walled Carbon Nanotubes from their Mixtures with Double‐Walled Carbon Nanotubes

Double‐walled carbon nanotubes (DWCNTs) are materials in high demand due to their superior properties. However, it is very challenging to prepare DWCNTs samples of high purity. In particular, the removal of single‐walled carbon nanotubes (SWCNTs) contaminants is a major problem. Here, a procedure for a selective removal of thin‐diameter SWCNTs from their mixtures with DWCNTs by lithium vapor treatment is investigated. The results are evaluated by Raman spectroscopy and in situ Raman spectroelectrochemistry. It is shown that the amount of SWCNTs was reduced by about 35 % after lithium vapor treatment of the studied SWCNTs–DWCNTs mixture.     

Functionalization of Single‐Walled Carbon Nanotubes

Through chemical functionalization of single‐walled carbon nanotubes, the prerequisites for possible applications of such nanostructures are established. The derivatized tubes differ from the crude materials in their good solubility, which enables both a more extensive characterization and subsequent chemical reactivity. Current derivatization methods include defect and covalent sidewall functionalization, as well as noncovalent exo‐ and endohedral functionalization. In this way, for example, a range of nanotubes can be prepared: with sidewall substituents, wrapped with polymers, or with guest molecules included. The current state of the literature is presented in this Minireview.     

DNA‐Mediated Copper Nanoparticle Formation on Dispersed Single‐Walled Carbon Nanotubes

A new and facile method for the preparation of single‐walled carbon nanotubes (SWCNTs) decorated with Cu nanoparticles (CuNPs) formed on a double‐stranded DNA template in aqueous solution has been developed. A specially designed synthetic DNA sequence, containing a single‐stranded domain for the dispersion of carbon nanotubes and double‐stranded domains for the selective growth of CuNPs, was utilized. The final SWCNT/CuNP hybrids were characterized using fluorescence spectroscopy and transmission electron microscopy. The analyses clearly demonstrated the selective formation of uniform CuNPs on the carbon nanotube scaffold.     

Carbon Nanotubes Fed on “Carbs”: Coating of Single‐Walled Carbon Nanotubes by Dextran Sulfate

A facile and easily reproducible technique for assembling biohybrid nanoparticles is a core feature that is highly desired for biomedical applications, considering the nature and limited lifespan of the biopolymers used. Here we show a simple and effective method to enfold single‐walled carbon nanotubes (SWNTs) using an anionic polysaccharide, dextran sulfate. After their interactions, SWNTs were rendered dispersible in aqueous solution and were shortened and unbundled to their basic dimension. Atomic force microscopy analysis was extensively employed to elucidate the mechanism of their interfacing. This biohybrid nanoparticle holds promise for biological and biomedical applications due to the synergistic unique properties of SWNTs and dextran sulfate.

     

Spectroscopic Characteristics of Differently Produced Single‐Walled Carbon Nanotubes

Single‐walled carbon nanotubes (SWNTs) synthesized with different methods are investigated by using multiple characterization techniques, including Raman scattering, optical absorption, and X‐ray absorption near edge structure, along with X‐ray photoemission by following the total valence bands and C 1s core‐level spectra. Four different SWNT materials (produced by arc discharge, HiPco, laser ablation, and CoMoCat methods) contain nanotubes with diameters ranging from 0.7 to 2.8 nm. The diameter distribution and the composition of metallic and semiconducting tubes of the SWNT materials are strongly affected by the synthesis method. Similar sp² hybridization of carbon in the oxygenated SWNT structure can be found, but different surface functionalities are introduced while the tubes are processed. All the SWNTs demonstrate stronger plasmon resonance excitations and lower electron binding energy than graphite and multiwalled carbon nanotubes. These SWNT materials also exhibit different valence‐band X‐ray photoemission features, which are considerably affected by the nanotube diameter distribution and metallic/semiconducting composition.     

Extraction of (9,8) Single‐Walled Carbon Nanotubes by Fluorene‐Based Polymers

Selective polymer wrapping is a promising approach to obtain high‐chiral‐purity single‐walled carbon nanotubes (SWCNTs) needed in technical applications and scientific studies. We showed that among three fluorene‐based polymers with different side‐chain lengths and backbones, poly[(9,9‐dihexylfluorenyl‐2,7‐diyl)‐co‐(9,10‐anthracene)] (PFH‐A) can selectively extract SWCNTs synthesized from the CoSO₄/SiO₂ catalyst, which results in enrichment of 78.3 % (9,8) and 12.2 % (9,7) nanotubes among all semiconducting species. These high‐chiral‐purity SWCNTs may find potential applications in electronics, optoelectronics, and photovoltaics. Furthermore, molecular dynamics simulations suggest that the extraction selectivity of PFH‐A relates to the bending and alignment of its alkyl chains and the twisting of its two aromatic backbone units (biphenyl and anthracene) relative to SWCNTs. The strong π–π interaction between polymers and SWCNTs would increase the extraction yield, but it is not beneficial for chiral selectivity. Our findings suggest that the matching between the curvature of SWCNTs and the flexibility of the polymer side chains and the aromatic backbone units is essential in designing novel polymers for selective extraction of (n,m) species.     

Photoinduced Luminescence Blinking and Bleaching in Individual Single‐Walled Carbon Nanotubes

The temporal evolution of photoluminescence in individual single‐walled carbon nanotubes (SWNT) under strong laser irradiation is studied and pronounced blinking and bleaching is observed, caused by photoinduced oxidation that subsequently quenches mobile excitons. The nanotubes are isolated with sodium cholate and spun onto either a glass or mica surface. Their bleaching behavior is investigated for variable laser intensities in air and argon atmosphere. The decay rate for luminescence bleaching generally increases with higher laser intensity, however saturating on mica substrates, which is attributed to limited availability of oxygen in the vicinity of the nanotubes. Step‐like events in the luminescence time traces corresponding to single oxidation events are analyzed regarding relative step height and suggest an exciton diffusion range of about 105 nm.     

Probing the Chemical Functionalization of Single‐Walled Carbon Nanotubes with Multiple Carbon Ad‐Dimer Defects

Drying‐tube‐shaped single‐walled carbon nanotubes (SWCNTs) with multiple carbon ad‐dimer (CD) defects are obtained from armchair (n,n,m) SWCNTs (n=4, 5, 6, 7, 8; m=7, 13). According to the isolated‐pentagon rule (IPR) the drying‐tube‐shaped SWCNTs are unstable non‐IPR species, and their hydrogenated, fluorinated, and chlorinated derivatives are investigated. Interestingly, chemisorptions of hydrogen, fluorine, and chlorine atoms on the drying tube‐shaped SWCNTs are exothermic processes. Compared to the reaction energies for binding of H, F, and Cl atoms to perfect and Stone–Wales‐defective armchair (5,5) nanotubes, binding of F with the multiply CD defective SWCNTs is stronger than with perfect and Stone–Wales‐defective nanotubes. The reaction energy for per F₂ addition is between 85 and 88 kcal mol^?1 more negative than that per H₂ addition. Electronic structure analysis of their energy gaps shows that the CD defects have a tendency to decrease the energy gap from 1.98–2.52 to 0.80–1.17 eV. After hydrogenation, fluorination, and chlorination, the energy gaps of the drying‐tube‐shaped SWCNTs with multiple CD defects are substantially increased to 1.65–3.85 eV. Furthermore, analyses of thermodynamic stability and nucleus‐independent chemical shifts (NICS) are performed to analyze the stability of these molecules.     

Photochemical Behavior of Single‐Walled Carbon Nanotubes in the Presence of Propylamine

This report describes the photochemical behavior of single‐walled carbon nanotubes (SWNTs) in the presence of propylamine. The SWNTs are characterized by absorption and Raman spectroscopy. The spectral changes due to photoirradiation indicate that reactions occur predominantly with the metallic SWNTs and small‐diameter SWNTs. The detection of amine radicalcation species by ESR spectroscopy reveals photoinduced electron transfer from the amine to the excited SWNTs. After exposure of the photoirradiated SWNTs to air, the characteristic spectra were recovered, except for that of the small‐diameter SWNTs. The results suggest that, after photoreduction of the SWNTs, subsequent selective sidewall functionalization of the small‐diameter SWNTs occurs.     

DFT Studies of Ag‐Loading Intrinsic and Functionalized Single‐Walled Carbon Nanotubes

The first principles study was performed on the stability of Ag adsorbed on the internal walls of single‐walled carbon nanotube (SWCNT) and loaded on acid modified SWCNT. The calculation results show that Ag can be adsorbed stably on the internal walls of SWCNT. With the increase of SWCNT diameter, the adsorption energy increases in a certain range. Ag can also be loaded on the modified SWCNT surface in the form of COOAg and OAg groups, and COOAg group is more stable than OAg group. For either the adsorption on the inner SWCNT or the load on the modified SWCNT surface, only a small proportion of the Ag ions can be stably bonded to the walls of SWCNT.     

Electrooxidation of Chlorophenols Catalyzed by Nickel Octadecylphthalocyanine Adsorbed on Single‐Walled Carbon Nanotubes

We described the synthesis of nickel octadecylphthalocyanine (NiPc(C₁₀H₂₁)₈), followed by its adsorption on single‐walled carbon nanotubes (SWCNT) to form SWCNT‐NiPc(C₁₀H₂₁)₈ conjugates. SWCNT‐NiPc(C₁₀H₂₁)₈ was used to modify a glassy carbon electrode (GCE) and for the electrooxidation of 4‐chlorophenol and 2,4‐dichlorophenol. The SWCNT and NiPc(C₁₀H₂₁)₈ have a synergistic effect on each other in terms of improving electrocatalysis for the detection of chlorophenols. The stability of the electrode improved in the presence of NiPc(C₁₀H₂₁)₈ or NiPc compared to the bare GCE. The presence of SWCNT improves the electrocatalytic behaviour of NiPc(C₁₀H₂₁)₈ but not of unsubstituted NiPc. All modified electrodes showed improved stability towards the detection of 2,4‐dichlorophenol. The best stability for 4‐CP detection was observed in the presence of SWCNT for NiPc(C₁₀H₂₁)₈.     

Thermal Stability of Oxidized Single‐Walled Carbon Nanotubes: Competitive Elimination and Decomposition Reaction Depending on the Degree of Functionalization

The thermal stability of oxidized single‐walled carbon nanotubes (SWNTs) with various degrees of oxidation was investigated. The oxidized SWNTs exhibited lower absorption and radial breathing mode (RBM) peaks and a higher intensity ratio of the D band to the G band (D/G) in their absorption and Raman spectra than those of the pristine SWNTs. After the thermal treatment, the D/G ratio of the oxidized SWNTs almost recovered its original intensity, regardless of the degree of oxidation. The absorption, photoluminescence (PL), and RBM peaks could not recover their original intensities when the oxidation degree was high. The results indicate that the elimination and decomposition reactions proceeded competitively depending on the degree of oxidation. In addition, a new PL peak was observed in the near‐infrared region, and the PL peak intensity increased with the subsequent thermal treatment. The theoretical calculations provided an insight into the possible pathways for the decomposition of oxidized SWNTs, showing that the O₂ elimination and CO/CO₂ evolution proceed competitively during thermal treatment.     

Supramolecular Surface Modification and Solubilization of Single‐Walled Carbon Nanotubes with Cyclodextrin Complexation

A novel approach to solubilize single‐walled carbon nanotubes (SWCNTs) in the aqueous phase is described by employing supramolecular surface modification. We use cyclodextrin complexes of synthetic molecules that contain a planar pyrene moiety or a bent, shape‐fitted triptycene moiety as a binding group connected through a spacer to an adamantane moiety that is accommodated in the cyclodextrin cavity. The binding groups attach to the sidewalls of SWCNTs through a π–π stacking interaction to yield a supramolecular system that allows the SWCNTs to dissolve in the aqueous phase through the formed hydrophilic cyclodextrin shell. The black aqueous SWCNT solutions obtained are stable over a period of months. They are characterized through absorbance, static, and time‐resolved fluorescence spectroscopy as well as Raman spectroscopy, TEM, and fluorescence‐decay measurements. Furthermore, the shape‐fitted triptycene‐based system shows a pronounced selectivity for SWCNTs with a diameter of 1.0 nm.