Optimizing Optoelectronic Properties of Pyrimidine‐Based TADF Emitters by Changing the Substituent for Organic Light‐Emitting Diodes with External Quantum Efficiency Close to 25 % and Slow Efficiency Roll‐Off

A series of green butterfly‐shaped thermally activated delayed fluorescence (TADF) emitters, namely PXZPM , PXZMePM , and PXZPhPM , are developed by integrating an electron‐donor (D) phenoxazine unit and electron‐acceptor (A) 2‐substituted pyrimidine moiety into one molecule via a phenyl‐bridge π linkage to form a D –π–A–π–D configuration. Changing the substituent at pyrimidine unit in these emitters can finely tune their emissive characteristics, thermal properties, and energy gaps between the singlet and triplet states while maintaining frontier molecular orbital levels, and thereby optimizing their optoelectronic properties. Employing these TADF emitters results in a green fluorescent organic light‐emitting diode (OLED) that exhibits a peak forward‐viewing external quantum efficiency (EQE) close to 25 % and a slow efficiency roll‐off characteristic at high luminance.     

Molecular and Device Design Strategies for Ideal Performance White Organic Light‐Emitting Diodes

The progress of white organic light‐emitting diodes (WOLEDs) via adopting fluorescent and phosphorescent organic materials have attracted commercial interest for their broad range of visible spectrum and potential of 100 % internal quantum efficiency. In this account, smart molecular designs for developing efficient phosphorescent host and good color purity blue fluorescent emitters are prepared to be discussed, especially donor‐acceptor modification to regulate their triplet states and bipolar transport properties. Rational device configuration design strategies were also introduced by cooperating with efficient conventional fluorescent and thermally activated delayed fluorescent emitting molecules to achieve full exciton utilization and simplified device structures, further suggesting perspectives of potentially low‐cost, ideal performance and promoted operational lifetime in WOLED devices.     

High‐Performance Non‐doped OLEDs with Nearly 100 % Exciton Use and Negligible Efficiency Roll‐Off

Non‐doped organic light‐emitting diodes (OLEDs) possess merits of higher stability and easier fabrication than doped devices. However, luminescent materials with high exciton use are generally unsuitable for non‐doped OLEDs because of severe emission quenching and exciton annihilation in neat films. Herein, we wish to report a novel molecular design of integrating aggregation‐induced delayed fluorescence (AIDF) moiety within host materials to explore efficient luminogens for non‐doped OLEDs. By grafting 4‐(phenoxazin‐10‐yl)benzoyl to common host materials, we develop a series of new luminescent materials with prominent AIDF property. Their neat films fluoresce strongly and can fully harvest both singlet and triplet excitons with suppressed exciton annihilation. Non‐doped OLEDs of these AIDF luminogens exhibit excellent luminance (ca. 100000 cd m^?2), outstanding external quantum efficiencies (21.4–22.6 %), negligible efficiency roll‐off and improved operational stability. To the best of our knowledge, these are the most efficient non‐doped OLEDs reported so far. This convenient and versatile molecular design is of high significance for the advance of non‐doped OLEDs.     

Doping‐Free White Organic Light‐Emitting Diodes

Doping‐free white organic light‐emitting diodes (WOLEDs) have great potential to the next‐generation solid‐state lighting and displays due to the excellent properties, such as high efficiency, bright luminance, low power consumption, simplified structure and low cost. In this account, our recent developments on doping‐free WOLEDs have been summarized. Firstly, fundamental concepts of doping‐free WOLEDs have been described. Then, the effective strategies to develop doping‐free WOLEDs have been presented. Particularly, the manipulation of charges and excitons distribution in different kinds of doping‐free WOLEDs have been highlighted, including doping‐free fluorescent/phosphorescent hybrid WOLEDs, doping‐free thermally activated delayed fluorescent WOLEDs and doping‐free phosphorescent WOLEDs. In the end, an outlook for the future development of doping‐free WOLEDs have been clarified.     

High Performance Thermally Activated Delayed Fluorescence Sensitized Organic Light‐Emitting Diodes

Recently, organic light‐emitting diodes (OLEDs) employing thermally activated delayed fluorescence (TADF) materials have aroused huge attention in both academia and industry. Compared with fluorescent and phosphorescent materials, TADF materials can theoretically capture 100 % excitons without incorporating noble metals, making them effective emitters and hosts for OLEDs simultaneously. Here, in this review, our recent works on mechanisms and materials of high performance TADF‐sensitized phosphorescent (TSP) OLEDs, TADF‐sensitized fluorescent (TSF) OLEDs and TADF‐sensitized TADF (TST) OLEDs are summarized. Finally, we propose the outlook for the further development and application of TADF‐sensitized OLEDs.     

Unique Solid‐State Emission Behavior of Aromatic Difluoroboronated β‐Diketones as an Emitter in Organic Light‐Emitting Devices

Aromatic difluoroboronated β‐diketone ( BF₂DK ) derivatives are a widely known class of luminescent organic materials that exhibit high photoluminescent quantum efficiency and unique aggregation‐dependent fluorescence behavior. However, there have been only a few reports on their use in solid‐state electronic devices, such as organic light‐emitting devices (OLEDs). Herein, we investigated the solid‐state properties and OLED performance of a series of π‐extended BF₂DK derivatives that have previously been shown to exhibit intense fluorescence in the solution state. The BF₂DK derivatives formed exciplexes with a carbazole derivative and exhibited thermally activated delayed fluorescence (TADF) behavior to give orange electroluminescence with a peak external quantum efficiency of 10 % that apparently exceeds the theoretical efficiency limit of conventional fluorescent OLEDs (7.5 %), assuming a light out‐coupling factor of 30 %.     

Recent Advances in Conjugated TADF Polymer Featuring in Backbone‐Donor/Pendant‐Acceptor Structure: Material and Device Perspectives

Along with the persistent research interest in organic light‐emitting diode (OLED) display and lighting technology, a new studying topic is now focused on developing thermally activated delayed fluorescence (TADF) polymer emitters, with the purpose to achieve high‐performance cost‐effective, solution‐processed OLEDs (s‐OLEDs) purely from fluorescent‐type materials. However, research in this topic is in its infancy about the designing rules of polymer structures, photophysical mechanisms and the correlated devices. In this Personal Account, mainly from our personal experience we will shortly introduce the historical developments, status and perspectives about one representative kinds of TADF polymers, i. e. the conjugated TADF polymers featuring in backbone‐donor/pendant‐acceptor (BDPA) structure scaffold, which shows very promising electroluminescent (EL) performance even using simple s‐OLED structure. Special attention is focused on illustrate the molecular designing & synthesis motivation, chemistry & device tactics towards solving the limiting factors about the quantum yields and aggregation‐quenching tendency in solid states. Further challenges and strategies towards optimizing their overall EL performance, e. g. simultaneous achieving extremely high external quantum efficiency, power efficiency and low roll‐off rate, are also discussed.     

Acridan‐Grafted Poly(biphenyl germanium) with High Triplet Energy,Low Polarizability,and an External Heavy‐Atom Effect for Highly Efficient Sky‐Blue TADF Electroluminescence

We propose the novel σ–π conjugated polymer poly(biphenyl germanium) grafted with two electron‐donating acridan moieties on the Ge atom for use as the host material in a polymer light‐emitting diode (PLED) with the sky‐blue‐emitting thermally activated delayed fluorescence (TADF) material DMAC‐TRZ as the guest. Its high triplet energy (E_T) of 2.86 eV is significantly higher than those of conventional π–π conjugated polymers (E_T=2.65 eV as the limit) and this guest emitter (E_T=2.77 eV). The TADF emitter emits bluer emission than in other host materials owing to the low orientation polarizability of the germanium‐based polymer host. The Ge atom also provides an external heavy‐atom effect, which increases the rate of reverse intersystem crossing in this TADF guest, so that more triplet excitons are harvested for light emission. The sky‐blue TADF electroluminescence with this host/guest pair gave a record‐high external quantum efficiency of 24.1 % at maximum and 22.8 % at 500 cd m^?2.     

Nondoped Deep‐Blue Organic Light‐Emitting Diodes with Color Stability and Very Low Efficiency Roll‐Off: Solution‐Processable Small‐Molecule Fluorophores by Phosphine Oxide Linkage

A series of solution‐processable small molecules PO1 – PO4 were designed and synthesized by linking N‐phenylnaphthalen‐1‐amine groups to a phenyl phosphine oxide core through a π‐conjugated bridge, and their thermal, photophysical, and electrochemical properties were investigated. The phosphine oxide linkage can disrupt the conjugation and allows the molecular system to be extended to enable solution processability and high glass transition temperatures (159–181 °C) while preserving the deep‐blue emission. The noncoplanar molecular structures resulting from the trigonal‐pyramidal configuration of the phosphine oxide can suppress intermolecular interactions, and thus these compounds exhibit strong deep‐blue emission both in solution and the solid state with high photoluminescent quantum yield (PLQY) of 0.88–0.99 in dilute toluene solution. Solution‐processed nondoped organic light‐emitting diodes featuring PO4 as emitter achieve a maximum current efficiency of 2.36 cd A^?1 with CIE coordinates of (0.15, 0.11) that are very close to the NTSC blue standard. Noticeably, all devices based on these small‐molecular fluorescent emitters show striking deep‐blue electroluminescent color stability and extremely low efficiency roll‐off.     

Constructing Charge‐Transfer Excited States Based on Frontier Molecular Orbital Engineering: Narrowband Green Electroluminescence with High Color Purity and Efficiency

The design and synthesis of organic materials with a narrow emission band in the longer wavelength region beyond 510 nm remain a great challenge. For constructing narrowband green emitters, we propose a unique molecular design strategy based on frontier molecular orbital engineering (FMOE), which can integrate the advantages of a twisted donor–acceptor (D‐A) structure and a multiple resonance (MR) delayed fluorescence skeleton. Attaching an auxiliary donor to a MR skeleton leads to a novel molecule with twisted D‐A and MR structure characteristics. Importantly, a remarkable red‐shift of the emission maximum and a narrowband spectrum are achieved simultaneously. The target molecule has been employed as an emitter to fabricate green organic light‐emitting diodes (OLEDs) with Commission Internationale de L'Eclairage (CIE) coordinates of (0.23, 0.69) and a maximum external quantum efficiency (EQE) of 27.0 %.