An Efficient Way for the Recognition of Zinc Ion via the Fluorescence Enhancement

This study concentrates on the spectral and complexing properties of a tetraoxycalix[2]arene[2]triazine derivative bearing two bipyridines (Calix‐BIPY2) in a mixture of acetonitrile:chloroform (4:1, V:V). The results show that Calix‐BIPY2 has a highly selectivity and sensitivity towards Zn²⁺ over various competing cations (K⁺, Cu²⁺, Cd²⁺, Co²⁺, Fe²⁺, Hg²⁺, Ag⁺, Al³⁺ and Pb²⁺). The complexation of Zn²⁺ induces a remarkable fluorescence enhancement due to combination effects of the binding strength, electron spins state of metal ions, photoinduced charge transfer (PCT) and the rigidity of the complexing unit offered by calixarene‐based hosts.     

Potassium selective chromoionophores

The ionisable chromoionophores5 were synthesised from simple precursors. These chromoionophores extract alkali metal cations from aqueous solutions at pH > 7 into dichloromethane. The ratio of extraction coefficients for the chromoionophore5c for K⁺ and Na⁺ indicate that it has potential for use in optical fibre sensors for K⁺ in the presence of Na⁺, Mg²⁺ and Ca²⁺ at extracellular concentrations.This paper is dedicated to the memory of the late Dr C. J. Pedersen.     

Fluorescent chemosensor for Cu2+ ion based on iminoanthryl appended calix[4]arene

Calix[4]arene based podands 1a of cone conformation and 1b of 1,3-alternate conformation possessing imine units and bearing anthracene moieties have been synthesized by a 1 + 2 Schiff base condensation in good yields and examined for their cation recognition abilities towards cations such as lithium, sodium, potassium, nickel, cadmium, copper, zinc, lead, silver and mercury ions by UV–vis and fluorescence spectroscopy. The calix[4]arene derivative 1b shows a selective fluorescence enhancement in presence of Cu²⁺ ions among the various metal ions tested (Li⁺, Na⁺, K⁺, Ni²⁺, Cd²⁺, Cu²⁺, Zn²⁺, Pb²⁺, Ag⁺ and Hg²⁺ ions). The colour of the solution changes from colourless to light yellow in the presence of Cu²⁺ ions. The stoichiometry of the complex formed between 1b and Cu²⁺ was found to be 1:1 as established by Job’s plot.     

Electrochemical Capacitive K+ EMIS Chemical Sensor Based on the Dibromoaza[7]helicene as an Ionophore for Potassium Ions Detection

A K⁺‐sensitive capacitive electrolyte‐membrane‐insulator‐semiconductor (EMIS) based on a novel dibromoaza[7]helicene ionophore has been developed. An ion‐sensitive membrane based on polyvinylchloride (PVC) doped with the ionophore was deposited on the Si₃N₄/SiO₂/Si‐p/Cu‐Al transducer. The properties of the K⁺‐EMIS chemical sensor were investigated by electrochemical impedance spectroscopy (EIS). All the developed devices upon being tested have shown good sensitivity and linearity responses within the range 10^?6 M to 10^?1 M of potassium activity, with good selectivity over a wide variety of other cations (Na⁺, Li⁺, Cu²⁺, Ca²⁺, and Mg²⁺). To our knowledge, this is the first time that a capacitive field‐effect sensor has been fabricated using helicene as a carrier for K⁺‐detection, combined with the structure: Si₃N₄/SiO₂/Si‐p/Cu‐Al as a transducer.     

Studying the photophysical properties of a polymerizable 1,8‐naphthalimide dye and its copolymer with styrene as potential fluorescent sensors for metal cations

The photophysical characteristics of a polymerizable 1,8‐naphthalimide dye and its copolymer with styrene have been investigated. The functional properties of both low and high molecular weight fluorophores in the presence of different metal cations have been discussed with regard to their potential application as fluorosensors for the metal cations and protons. In acetonitrile solution the monomeric 1,8‐naphthalimide enhances its fluorescence emission in the presence of metal cations (Zn²⁺, Fe³⁺, Co²⁺, Pb²⁺, Cu²⁺, Ni²⁺, and Mn²⁺). In aqueous media the poly(St‐co‐MD) exhibits a selective response to Fe³⁺ cations. The monomeric and polymeric fluorophores also exhibit a considerable increase in their fluorescence intensity at acidic pH values (pH < 6) which suggest that they could be used as ON–OFF probes in analytical devices for signaling the presence of protons. Copyright © 2008 John Wiley & Sons, Ltd.     

Metal‐Cation Recognition in Water by a Tetrapyrazinoporphyrazine‐Based Tweezer Receptor

A series of zinc azaphthalocyanines with two azacrowns in a rigid tweezer arrangement were prepared and the fluorescence sensing properties were investigated. The size‐driven recognition of alkali and alkaline earth metal cations was significantly enhanced by the close cooperation of the two azacrown units, in which both donor nitrogen atoms need to be involved in analyte binding to switch the sensor on. The mono‐ or biphasic character of the binding isotherms, together with the binding stoichiometry and magnitude of association constants (K_A), indicated specific complexation of particular analytes. Water solvation was shown to play an important role and resulted in a strong quenching of sensor fluorescence in the ON state. The lead compound was embedded into silica nanoparticles and advantageous sensing properties towards K⁺ were demonstrated in water (λ_F=671 nm, apparent K_A=82 m ^?1, increase of 17×), even in the presence of (supra)physiological concentrations of Na⁺ and Ca²⁺.     

Aptamer-Based Fluorescence Nanoprobe for Sensitive and Selective Detection of Potassium

A new aptamer-based fluorescence nanoprobe for potassium ion (K⁺) has been developed. The nanoprobe employs gold nanoparticles (AuNPs) as the sensing platform and Rhodamine B as the fluorescence indicator. Aptamer acts as the switch of fluorescence signal of Rhodamine B. In the presence of K⁺, aptamer departs from AuNPs as a result of the formation of G-quartets with K⁺, leading to the decrease of fluorescence signals. Under the optimum conditions, the limit of detection (LOD) for K⁺ is as low as 3.8 nM. The proposed method was successfully applied in the determination of K⁺ in human saliva sample.     

一种基于硫杂杯[4]芳烃的高效银离子载体

合成了基于下缘含有酰肼基团的硫杂杯芳烃衍生物的银离子载体1,其核磁研究证实硫杂杯芳烃以1,3-交替构象存在,并且通过非竞争萃取实验和竞争萃取实验研究了它对碱金属和过渡金属离子（Li⁺, Na⁺, K⁺, Cs⁺, Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺ and Ag⁺）的键合能力和选择性。实验结果表明：将酰肼基团引入1,3-交替构象的硫杂杯芳烃骨架的下缘可以提高其对Ag⁺的键合能力和选择性,同时,对Cu²⁺的萃取能力较弱,对碱金属离子和其它的重金属离子几乎没有萃取能力。进一步的核磁滴定和电喷雾质谱实验显示化合物1与银离子形成配合物的配合计量比为1：1,由此推断主要由“N-Ag⁺”配位键以及硫杂杯芳烃骨架的协同作用构成了化合物1与银离子的配合模式。     

Design and Syntheses of Novel Calix[4]crown: Calix[4]‐Dixanthates‐Crowns

Abstract

A series of novel calix[4]‐dixanthates‐crowns were designed and synthesized by the “1 + 1 condensation” of reacting calix[4]‐1,3‐dixanthate salts derivative (4) with polyethylene glycol ditosylates in 40–60% yields. It was found that the new calixcrowns showed outstanding complexation abilities towards soft cations. Calix[4]‐dixanthate‐crown‐4 (5b) exhibited high complexation selectivity towards Ni²⁺.     

Synthesis and selective recognition toward zinc ion of chiral poly(imine‐triazole)

A novel AB type of clickable monomer, (S)‐2‐[(2‐azido‐1‐phenylethylimino)methyl]‐5‐propargyloxyphenol (AMPP) was designed and polymerized to yield a class of main‐chain chiral poly(imine‐triazole)s through the metal‐free click reaction. With the thermally induced polymerization, the desired polytriazoles can be easily prepared in high yields by a stepwise heating‐up process and have the number‐average molecular masses ranging from 5.1 × 10³ to 58.1 × 10³ (polydispersity indices = 1.38?1.68). The polymers were characterized by Fourier Transform Infrared spectroscopy (FTIR), ¹H Nuclear Magnetic Resonance (NMR), and gel permeation chromatography, and their optical properties were studied by fluorescence and circular dichroism (CD) spectroscopies. As a chemosensor, these polymers exhibited a selective “turn‐on” fluorescence enhancement response toward Zn²⁺ ion over other cations such as Na⁺, K⁺, Mg²⁺, Ca²⁺, Ag⁺, Pb²⁺, Cd²⁺, Hg²⁺, Mn²⁺, and Ni²⁺ in dimethyl sulfoxide. However, the Zn²⁺‐induced fluorescence signal was subject to serious interference by Al³⁺, Cu²⁺, Cr³⁺, and Fe³⁺ ions. Interestingly, the chiral polymer showed distinctive changes in the CD spectra on complexation with Zn²⁺, which allowed for the discrimination of this ion in the presence of other species tested including those interfering ions observed in the fluorescent detection. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 2248–2257     

Metal ion complexation in acetonitrile by upper-rim allyl-substituted, di-ionized calix[4]arenes bearing two dansyl fluorophores

The influence of Li⁺, Na⁺, K⁺, Rb⁺, Cs⁺, Mg²⁺, Ca²⁺, Sr²⁺, Ba²⁺, Ag⁺, Cd²⁺, Co²⁺, Fe²⁺, Hg²⁺, Mn²⁺, Pb²⁺, Zn²⁺ and Fe³⁺ on the spectroscopic properties of two dansyl (1-dimethylaminonaphthalene-5-sulfonyl) groups linked to the lower rims of a series of three, structurally related, di-ionized calix[4]arenes is investigated by means of absorption and emission spectrophotometry. Di(tetramethylammonium) salts of the di-ionized ligands, L, L1, and L2, which differ in having no, two and four allyl groups, respectively, on the upper rim of the calix[4]arene scaffold, are utilized for the spectrofluorimetric titration experiments in MeCN. On complexation by alkaline earth metal cations, the emission spectra undergo marked red shifts and quenching of the dansyl fluorescence. These effects are weaker with alkali metal cations. Transition metal cations and Pb²⁺ interact strongly with the ligands. In particular, Fe³⁺, Hg²⁺ and Pb²⁺ cause greater than 99% quenching of the dansyl fluorescence.     

Metal ion complexation in acetonitrile by di-ionized calix[4]arenes bearing two dansyl fluorophores

The influence of metal cations (Li⁺, Na⁺, K⁺, Rb⁺, Cs⁺, Mg²⁺, Ca²⁺, Sr²⁺, Ba²⁺, Ag⁺, Cd²⁺, Co²⁺, Fe²⁺, Hg²⁺, Mn²⁺, Pb²⁺, Zn²⁺ and Fe³⁺) on the spectroscopic properties of two dansyl (1-dimethylaminonaphthalene-5-sulfonyl) groups linked to the lower rims of a series of three, structurally related, di-ionized calix[4]arenes was investigated by means of absorption and emission spectrophotometry. Di(tetramethylammonium) salts of the di-ionized ligands, (TMA)₂L1, (TMA)₂L2 and (TMA)₂L3, which differ in having zero, two and four tert-butyl groups, respectively, on the upper rim of the calix[4]arene scaffold were utilized for the spectrofluorimetric titration experiments in acetonitrile. On complexation by alkaline earth metal cations, both the absorption and emission spectra undergo marked red shifts and quenching of the dansyl fluorescence. These effects are weaker with alkali metal cations. Transition metal cations interact strongly with the ligands. In particular, Fe³⁺, Hg²⁺ and Pb²⁺ cause greater than 97% quenching of the dansyl fluorescence in the di-ionized ligands.     

Potassium p‐nitro­phenyl sulfate

The crystal structure of the title compound, K⁺·C₆H₄NO₆S⁻, is built up from p‐nitro­phenyl sulfate anions and potassium cations. Adjacent anions form dimers, which are linked together in a three‐dimensional network via short C—H⋯O contacts. The coordination sphere of the K⁺ ions may be described as a distorted square antiprism. The crystal structure is further stabilized by π–π stacking interactions between the aryl rings.     

Synthesis of Novel 4‐((Substituted bis‐indolyl)methyl)‐benzo‐15‐crown‐5 for the Colorimetric Detection of Hg2+ Ions in an Aqueous Medium

A practical, two‐step synthesis of novel 4‐(substituted bis‐indolyl)methyl)benzo‐15‐crown‐5 has been reported. The strategy employed for the synthesis of the desired molecules involved Duff formylation of benzo‐15‐crown‐5 to get 4‐formyl benzo‐15‐crown‐5 followed by subsequent reactions with substituted indoles in trifluoroacetic acid to yield novel 4‐(substituted bis‐indolyl)methyl)benzo‐15‐crown‐5 in moderate to good yield. One of the reported novel molecule tested for the complexation behavior with various metal cations, such as Li⁺, Na⁺, K⁺, Mg²⁺ Ca²⁺, Al³⁺, Fe²⁺, Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺, Cd²⁺, Sn²⁺, Ba²⁺, Hg²⁺, and Pb²⁺, showed a visual colorimetric probe for the detection of mercury cations (Hg²⁺) in an aqueous medium.     

Synthesis and adsorption properties of the cation exchange forms of OFF-type zeolite

The possibility of the ion-exchange of Na⁺ and K⁺ cations contained in OFF-type zeolite for H⁺, Ni²⁺, Cu²⁺, Co²⁺, and La³⁺ cations is investigated. Chemical and phase compositions, the morphology of crystals, and the adsorption properties of synthesized samples are studied via X-ray fluorescence and X-ray diffraction analysis, IR spectroscopy, scanning electron microscopy, and adsorption measurements.     

Calix[4]arene-based fluorescent probe and the adsorption capacity of its electrospun nanofibrous film for the cesium cation as an adsorbent

Calix[4]arene-based cation receptor 1 has been synthesised by following a multi-step synthetic procedure. The fluorescence properties of 1 upon the addition of various metal ions were investigated by fluorescence spectroscopy. As a result, it was revealed that 1 displayed dramatic quenching effect upon the exposure to Cs⁺. In contrast, no significant quenching effects were observed upon the addition of other metal ions such as Li⁺, Na⁺, K⁺, Mg²⁺, Ca²⁺, Sr²⁺, Ag⁺, Zn²⁺ and Ni²⁺. Compound 1 was also found by Job plot to form a 1:1 complex with Cs⁺. In addition, we also prepared 1-embedded electrospun nanofibrous film (NF-1) as an adsorbent for Cs⁺. NF-1 is proved to adsorb Cs⁺ effectively from an aqueous solution, indicating that it would be usefully utilised as an adsorbent to remove Cs⁺.     

Absorption and fluorescence properties of acridinones,thioacridinones, aminoacridines and related crown ethers

We report a study on the absorptive and emissive properties of 9‐acridinones, 9‐thioacridinones and 9‐aminoacridines including six crown ether derivatives. The effect of solvents and of the addition of cations (Na⁺, K⁺, Ca2⁺ and Mg2⁺) on these properties has been studied. The absorption of the crown ether derivative of 9‐thioacridinone is sensitive to solvents while the fluorescence of crown ethers derived from 9‐aminoacridines shows some specificity towards cations. Empirical modeling was used to discuss the emission characteristics of these compounds.     

A highly selective pyrene based fluorescent sensor toward Hg detection

A new pyrene-containing fluorescent sensor has been synthesized from 2,3,3-trimethylindolenine. Spectroscopic and photophysical properties of sensor are presented. The large change in fluorescence intensity (I/I₀ = 0.13) at 381 nm and affinity to Hg²⁺ over other cations such as K⁺, Na⁺, Ca²⁺, Mg²⁺, Pb²⁺, and Cu²⁺ make this compound a useful chemosensor for Hg²⁺ detection in hydrophilic media. The sensor (6.0 × 10⁻⁶ M) displays significant fluorescence quenching upon addition of Hg²⁺ in pH 7.4 HEPES buffer without excimer formation. Job’s plot analysis shows the binding stoichiometry to be 2:1 (host/guest).     

Selective metal detection in an unsymmetrical 1,3-alternate calix[4]biscrown chemosensor

Calix[4]crown-based chemosensors 1, 2, and reference 3 have been synthesized. The weak fluorescence intensity of 1,5-naphthalene of 1 suggests that the benzene rings of the calix[4]arene as well as the oxygen atoms of the crown-5 ring take part in PET. The complexation of two K⁺ ions by both crown-5 and 1,5-naphthalene-crown-6 loops of 1 caused fluorescence enhancement of the naphthalene unit by CHEF. Pb²⁺ acted as a quenching metal ion.     

Synthesis,complexation, and <Emphasis Type="Italic">E—Z</Emphasis> photoisomerization of azadithiacrown-containing styryl dyes as new optical sensors for mercury cations

New styryl dyes containing azadithia-15-crown-5 fragments were synthesized. The complexation of these compounds with Ag⁺, Pb²⁺, Cu²⁺, Hg²⁺, and H⁺ cations was studied by ¹H NMR spectroscopy, steady-state, and time-resolved spectroscopy. The stability constants of the complexes were calculated from the spectrophotometric titration data. The photophysical properties and E—Z photoisomerization of styryl dyes and their complexes with mercury and copper(II) cations in acetonitrile were examined. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 3, pp. 495–507, March, 2007. Centre de Physique Moléculaire Optique et Hertzienne-UMR CNRS 5798, Bordeaux University I, 351 Cours de la Libération, 33405 Talence, France.