Design of Degradable Click Delivery Systems

Click chemistry has had a significant impact in the field of materials science over the last 10 years, as it has enabled the design of new hybrid building blocks, leading to multifunctional and responsive materials. One key application for such materials is in the biomedical field, such as gene or drug delivery. However, to meet the functional requirements of such applications, tailored degradability of these materials under biological conditions is critical. There has been an increasing interest in combining click chemistry techniques with a range of degradable or responsive building blocks as well as investigating new or milder chemistries to design click delivery systems that are capable of physiologically relevant degradation. This Feature Article will cover some of the different approaches to synthesize degradable click delivery systems and their investigation for therapeutic release.

     

Clickable functionalization of liposomes with the gH625 peptide from Herpes simplex virus type I for intracellular drug delivery

Liposomes externally modified with the nineteen residues gH625 peptide, previously identified as a membrane‐perturbing domain in the gH glycoprotein of Herpes simplex virus type I, have been prepared in order to improve the intracellular uptake of an encapsulated drug. An easy and versatile synthetic strategy, based on click chemistry, has been used to bind, in a controlled way, several copies of the hydrophobic gH625 peptide on the external surface of 1,2‐dioleoyl‐sn‐glycero‐3‐phosphocholine (DOPG)‐based liposomes. Electron paramagnetic resonance studies, on liposomes derivatized with gH625 peptides, which are modified with the 2,2,6,6‐tetramethylpiperidine‐1‐oxyl‐4‐amino‐4‐carboxylic acid (TOAC) spin label in several peptide positions, confirm the positioning of the coupled peptides on the liposome external surface, whereas dynamic light scattering measurements indicate an increase of the diameter of the liposomes of approximately 30 % after peptide introduction. Liposomes have been loaded with the cytotoxic drug doxorubicin and their ability to penetrate inside cells has been evaluated by confocal microscopy experiments. Results suggest that liposomes functionalized with gH625 may act as promising intracellular targeting carriers for efficient delivery of drugs, such as chemotherapeutic agents, into tumor cells.     

Expanded Click Conjugation of Recombinant Proteins with Ubiquitin-Like Modifiers Reveals Altered Substrate Preference of SUMO2-Modified Ubc9

Wrestling with SUMO: The chemical conjugation of proteins with small ubiquitin-like modifiers (SUMO) can be achieved by a copper(I)-catalyzed cycloaddition and unnatural amino acid mutagenesis. This approach overcomes previous restrictions related to the primary sequence of proteins and coupling conditions. Moreover, biochemical data suggests that this triazole linkage presents the modifier in a proper distance and orientation relative to the target protein.     

点击化学在生物医用高分子中的应用

点击化学的概念提出不到10年,由于其反应条件温和,反应效率高,产物后处理简单等诸多优点而备受关注。本文概述了点击化学技术应用于生物医用高分子材料的合成,主要介绍了铜催化叠氮炔环加成(copper-catalyzed azide-alkyne cycloaddition)点击化学合成和制备多功能性和智能响应性高分子用于非病毒高分子基因载体、高分子胶束药物载体和水凝胶控制释放体系等的研究和最新进展,提出了点击化学在生物医用高分子材料合成中应用的主要问题,并对其发展前景进行了展望。     

Effect of the Folate Ligand Density on the Targeting Property of Folated‐Conjugated Polymeric Nanoparticles

Targeted drug delivery systems have attracted increasing attention due to their ability for delivering anticancer drugs selectively to tumor cells. Folic acid (FA)‐conjugated targeted block copolymers, FA‐Pluronic‐polycaprolactone (FA‐Pluronic‐PCL) are synthesized in this study. The anticancer drug paclitaxel (PTX) is loaded in FA‐Pluronic‐PCL nanoparticles by nanoprecipitation method. The in vitro release of PTX from FA‐Pluronic‐PCL nanoparticles shows slow and sustained release behaviors. The effect of FA ligand density of FA‐Pluronic‐PCL nanoparticles on their targeting properties is examined by both cytotoxicity and fluorescence methods. It is shown that FA‐Pluronic‐PCL nanoparticles indicated better targeting ability than non‐targeted PCL‐Pluronic‐PCL nanoparticles. Furthermore, FA‐F127‐PCL nanoparticle with 10% FA molar content has more effective antitumor activity and higher cellular uptake than those with 50% and 91% FA molar content. These results prove that FA‐F127‐PCL nanoparticle with 10% FA molar content can be a better candidate as the drug carrier in targeted drug delivery systems.     

Bis‐clickable Mesoporous Silica Nanoparticles: Straightforward Preparation of Light‐Actuated Nanomachines for Controlled Drug Delivery with Active Targeting

Bis(clickable) mesoporous silica nanospheres (ca. 100 nm) were obtained by the co‐condensation of TEOS with variable amounts (2–5 % each) of two clickable organosilanes in the presence of CTAB. Such nanoparticles could be easily functionalized with two independent functions using the copper‐catalyzed alkyne‐azide cycloaddition (CuAAC) reaction to transform them into nanomachines bearing cancer cell targeting ligands with the ability to deliver drugs on‐demand. The active targeting was made possible after anchoring folic acid by CuAAC click reaction, whereas the controlled delivery was performed by clicked azobenzene fragments. Indeed, the azobenzene groups are able to obstruct the pores of the nanoparticles in the dark whereas upon irradiation in the UV or in the blue range, their trans‐to‐cis photoisomerization provokes disorder in the pores, enabling the delivery of the cargo molecules. The on‐command delivery was proven in solution by dye release experiments, and in vitro by doxorubicin delivery. The added value of the folic acid ligand was clearly evidenced by the difference of cell killing induced by doxorubicin‐loaded nanoparticles under blue irradiation, depending on whether the particles featured the clicked folic acid ligand or not.     

Design and Synthesis of Lipidic Organoalkoxysilanes for the Self‐Assembly of Liposomal Nanohybrid Cerasomes with Controlled Drug Release Properties

This paper reports the facile design and synthesis of a series of lipidic organoalkoxysilanes with different numbers of triethoxysilane headgroups and hydrophobic alkyl chains linked by glycerol and pentaerythritol for the construction of cerasomes with regulated surface siloxane density and controlled release behavior. It was found that the number of triethoxysilane headgroups affected the properties of the cerasomes for encapsulation efficiency, drug loading capacity, and release behavior. For both water‐soluble doxorubicin (DOX) and water‐insoluble paclitaxel (PTX), the release rate from the cerasomes decreased as the number of triethoxysilane headgroups increased. The slower release rate from the cerasomes was attributed to the higher density of the siloxane network on the surface of the cerasomes, which blocks the drug release channels. In contrast to the release results with DOX, the introduction of one more hydrophobic alkyl chain into the cerasome‐forming lipid resulted in a slower release rate of PTX from the cerasomes due to the formation of a more compact cerasome bilayer. An MTT viability assay showed that all of these drug‐loaded cerasomes inhibited proliferation of the HepG2 cancer cell line. The fine tuning of the chemical structure of the cerasome‐forming lipids would foster a new strategy to precisely regulate the release rate of drugs from cerasomes.     

Surface modification of polymeric micelles by strain-promoted alkyne-azide cycloadditions

Organomicelles modified by surface dibenzylcyclooctyne moieties can conveniently be functionalized by strain-promoted alkyne-azide cycloadditions. The ligation approach is highly efficient, does not require toxic reagents and is compatible with a wide variety of functional modules. Interactions of proteins with surface ligands of the micelles have been studied by AFM, which revealed that it leads to disassembly of the particles thereby providing a mechanism for triggered drug release.     

Alkene–Azide 1,3‐Dipolar Cycloaddition as a Trigger for Ultrashort Peptide Hydrogel Dissolution

An alkene–azide 1,3‐dipolar cycloaddition between trans‐cyclooctene (TCO) and an azide‐capped hydrogel that promotes rapid gel dissolution is reported. Using an ultrashort aryl azide‐capped peptide hydrogel (PhePhe), we have demonstrated proof‐of‐concept where upon reaction with TCO, the hydrogel undergoes a gel–sol transition via 1,2,3‐triazoline degradation and 1,6‐self‐immolation of the generated aniline. The potential application of this as a general trigger in sustained drug delivery is demonstrated through release of encapsulated cargo (doxorubicin). Administration of TCO resulted in 87 % of the cargo being released in 10 h, compared to 13–14 % in the control gels. This is the first example of a potential bioorthogonal‐triggered hydrogel dissolution using a traditional click‐type reaction. This type of stimulus could be extended to other aryl azide‐capped hydrogels.     

Manipulating the Click Reactivity of Dibenzoazacyclooctynes: From Azide Click Component to Caged Acylation Reagent by Silver Catalysis

Strain-promoted azide–alkyne cycloaddition using dibenzoazacyclooctyne (DBCO) is widely applied in copper-free bioorthogonal reactions. Reported here is the efficient acid-promoted rearrangement and silver-catalyzed amidation of DBCO, which alters its click reactivity robustly. In the switched click reaction, DBCO, as a caged acylation reagent, enables rapid peptide/protein modification after decaging facilitated by silver catalysts, rendering site-specific conjugation of an IgG antibody by a Fc-targeting peptide.     

Click chemistry strategies for the accelerated synthesis of functional macromolecules

Click chemistry is one of the most powerful strategies for constructing polymeric soft materials with precise control over architecture and functionality. In this review, we provide a comprehensive summary of the state-of-the art for synthesizing functional polymers and their expanding range of applications. The synthetic and mechanistic aspects are discussed for key reactions that fulfill “click” requirements and their applications in construction of macromolecules with linear, branched, and other complex architectures are described.     

Phosphonodithioester–Amine Coupling as a Key Reaction Step for the Design of Cationic Amphiphiles Used for Gene Delivery

A convergent synthesis of cationic amphiphilic compounds is reported here with the use of the phosphonodithioester–amine coupling (PAC) reaction. This versatile reaction occurs at room temperature without any catalyst, allowing binding of the lipid moiety to a polar head group. This strategy is illustrated with the use of two lipid units featuring either two oleyl chains or two-branched saturated lipid chains. The final cationic amphiphiles were evaluated as carriers for plasmid DNA delivery in four cell lines (A549, Calu3, CFBE and 16HBE) and were compared to standards (BSV36 and KLN47). These new amphiphilic derivatives, which were formulated with DOPE or DOPE-cholesterol as helper lipids, feature high transfection efficacies when associated with DOPE. The highest transfection efficacies were observed in the four cell lines at low charge ratios (CR = 0.7, 1 or 2). At these CRs, no toxic effects were detected. Altogether, this new synthesis scheme using the PAC reaction opens up new possibilities for investigating the effects of lipid or polar head groups on transfection efficacies.     

Magnetoliposomes as Potential Carriers of Doxorubicin to Tumours

Studies on magnetoliposomes (MLUV) as potential carriers for magnetic‐field‐dependent drug delivery are presented. The systems were formed with hydrophobic superparamagnetic iron oxide nanoparticles (SPIONs) confined within the bilayer of the liposomes. The nanomechanical properties of bilayer lipid membranes were evaluated and related to the amount of incorporated SPIONs. It was found that the presence of SPIONs in the lipid membrane leads to overall stiffening and increases morphological inhomogeneity, facilitating rupture of the MLUV membrane in a low‐frequency alternating magnetic field (AMF). To verify the findings, doxorubicin release from MLUVs in the presence and absence of an AMF was measured. Under experimental conditions, drug release proceeds through MLUV rupture induced by mechanical vibration of SPIONs rather than through localized heating in the vicinity of the SPIONs.