Uniformly Oriented Zeolite ZSM‐5 Membranes with Tunable Wettability on a Porous Ceramic

Facile fabrication of well‐intergrown, oriented zeolite membranes with tunable chemical properties on commercially proven substrates is crucial to broadening their applications for separation and catalysis. Rationally determined electrostatic adsorption can enable the direct attachment of a b‐oriented silicalite‐1 monolayer on a commercial porous ceramic substrate. Homoepitaxially oriented, well‐intergrown zeolite ZSM‐5 membranes with a tunable composition of Si/Al=25–∞ were obtained by secondary growth of the monolayer. Intercrystallite defects can be eliminated by using Na⁺ as the mineralizer to promote lateral crystal growth and suppress surface nucleation in the direction of the straight channels, as evidenced by atomic force microscopy measurements. Water permeation testing shows tunable wettability from hydrophobic to highly hydrophilic, giving the potential for a wide range of applications.     

2H‐Tetrakis(3,5‐di‐tert‐butyl)phenylporphyrin on a Cu(110) Surface: Room‐Temperature Self‐Metalation and Surface‐Reconstruction‐Facilitated Self‐Assembly

The adsorption behavior of 2H‐tetrakis(3,5‐di‐tert‐butyl)phenylporphyrin (2HTTBPP) on Cu(110) and Cu(110)–(2×1)O surfaces have been investigated by using variable‐temperature scanning tunneling microscopy (STM) under ultrahigh vacuum conditions. On the bare Cu(110) surface, individual 2HTTBPP molecules are observed. These molecules are immobilized on the surface with a particular orientation with respect to the crystallographic directions of the Cu(110) surface and do not form supramolecular aggregates up to full monolayer coverage. In contrast, a chiral supramolecular structure is formed on the Cu(110)–(2×1)O surface, which is stabilized by van der Waals interactions between the tert‐butyl groups of neighboring molecules. These findings are explained by weakened molecule–substrate interactions on the Cu(110)–(2×1)O surface relative to the bare Cu(110) surface. By comparison with the corresponding results of Cu–tetrakis(3,5‐di‐tert‐butyl)phenylporphyrin (CuTTBPP) on Cu(110) and Cu(110)–(2×1)O surfaces, we find that the 2HTTBPP molecules can self‐metalate on both surfaces with copper atoms from the substrate at room temperature (RT). The possible origins of the self‐metalation reaction at RT are discussed. Finally, peculiar irreversible temperature‐dependent switching of the intramolecular conformations of the investigated molecules on the Cu(110) surface was observed and interpreted.     

Preparation of syndiotactic poly(4‐tert‐butyldimethyl‐silyloxystyrene) and poly(4‐hydroxystyrene)

Syndiospecific silyloxy‐functionalized polystyrene with high molecular weight was prepared using a (pentamethylcyclopentadienyl)titanatrane/MMAO catalyst system. The resulting polymer is soluble in polar organic solvents such as THF and shows good thermal stability. In addition, the compound Ni(acac)₂ was used as a catalyst in preparing authentic atactic polymer of 4‐tert‐butyldimethylsilyloxystyrene under the same conditions. The chemical transformation of syndiospecific poly(4‐tert‐butyldimethylsilyloxystyrene) also gave a new polar polymer, namely syndiotactic poly(4‐hydroxystyrene) which is unattainable by traditional synthetic methods.     

Adsorption of 4‐tert‐Butylpyridine on TiO2 Surface in Dye‐Sensitized Solar Cells

4‐tert‐Butylpyridine (4‐TBP) has been widely used as additive in dye‐sensitized solar cells (DSC), owing to its improvement of the fill factor and the open circuit voltage of DSC. In this paper, the adsorption of 4‐TBP on the rutile TiO₂(110) surface in DSC was studied by using the density functional theory at DFT/B3LYP level. By comparing the results with those attained from experiments, it was concluded that the 4‐TBP could chemiadsorb on the incompletely covered surface Ti atoms in the electrode. The probable mechanism of compressed recombination by coordinated 4‐TBP in DSC was proposed.     

Poly(methyl silsesquioxane)/amphiphilic block copolymer hybrids and their porous derivatives: Poly(styrene‐block‐acrylic acid) and poly(styrene‐block‐3‐trimethoxysilylpropyl methacrylate)

Porous poly(methyl silsesquioxane) (PMSSQ) films were prepared from PMSSQ/amphiphilic block copolymer (ABC) hybrids, and this was followed by spin coating and multistep baking. The ABCs were poly(styrene‐block‐acrylic acid) (PS‐b‐PAA) and poly(styrene‐block‐3‐trimethoxysilylpropyl methacrylate) (PS‐b‐PMSMA), which were synthesized by living polymerization. The chemical bonding between the ABCs and PMSSQ resulted in significant differences in the morphologies and properties of the hybrids and their porous derivatives. Both intramolecular and intermolecular hydrogen bonding existed in the PMSSQ/PS‐b‐PAA hybrid and led to macrophase separation. Through the modification of the chemical structure from the poly(acrylic acid) segment to PMSMA, covalent bonding between PMSSQ and PMSMA occurred and prevented the macrophase separation and initial pyrolysis of the ABC. Modulated differential scanning calorimetry results also suggested a significant difference in the miscibility of the two hybrid systems. The chemical bonding resulted in higher retardation of the symmetry‐to‐nonsymmetry Si? O? Si structural transformation for PMSSQ/PS‐b‐PMSMA than for PMSSQ/PS‐b‐PAA according to Fourier transform infrared studies. The pore size of the nanoporous thin film from the PMSSQ/PS‐b‐PMSMA hybrid was estimated by transmission electron microscopy to be less than 15 nm. The refractive index and dielectric constant of the prepared porous films decreased from 1.354 to 1.226 and from 2.603 to 1.843 as the PS‐b‐PMSMA loading increased from 0 to 50 wt %, respectively. This study suggests that chemical bonding in hybrid materials plays a significant role in the preparation of low‐dielectric‐constant nanoporous films. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 4466–4477, 2004     

Step‐Mediated Anisotropic Adsorption and Condensation of tert‐Butylamine on Cu(111)

Scanning tunneling microscopy (STM) combined with density functional theory (DFT) calculations were applied in studying the anisotropic adsorption and condensation of tert‐butylamine (t‐BA) molecules in the vicinity of the steps on the Cu(111) surface. The preferential adsorption at the upper step edges and uneven distribution of t‐BA in the vicinity of the steps illustrate the asymmetric electronic structure of the surface steps. Our observation demonstrates that the adsorption and diffusion of a polar molecule would be significantly mediated by steps on metal surfaces due to the molecule–step interaction and the intermolecular interactions.     

The low‐temperature phase of di‐tert‐butylsilanediol

The crystal structure of di‐tert‐butyl­silanediol, C₈H₂₀O₂Si, has a reversible phase transition at 211 (2) K. The orthorhombic high‐temperature structure has space group Ibam, with Z′ = , and shows a disordered hydrogen‐bonding system. The low‐temperature structure, determined at 143 (2) K, has a twinned monoclinic cell, with space group C2/c and Z′ = 2, and shows an ordered hydrogen‐bonding system.     

Effect of spin polarization for hydrogen adsorbed on Si(111)(1×1) surface: First‐principles calculations

The role of spin polarization on adsorption of atomic and molecular hydrogen on Si(111)(1×1) surface is examined by comparing the results of the local spin density approximation (LSD) and those of the local density approximation (LDA). A large improvement of the adsorption energies (around 0.8 eV/H) was found for the H atom adsorbed on Si(111)(1×1) surface. The inclusion of spin polarization reduces the overbinding between the H atom and the silicon surface and its effect is much more pronounced when the H atom is far away from the surface. Despite of the large changes in the adsorption energies, the main character of the potential energy surface of the H atom on Si(111)(1×1) surface is retained. An opposite effect is found in the charge‐density‐transfer map of LSD results as compared to LDA results for the H atom approaching the surface through the H3 path, in which the H atom loses electrons rather than gains electrons from the surface. The fact that the H atom tends to lose electrons in the silicon bulk has already been reported by the experimental studies for the behavior of the H atom in the p‐type silicon. For the molecular hydrogen on Si(111)(1×1) surface, the effect of the spin polarization is so small that it can be neglected. © 2000 John Wiley & Sons, Inc. Int J Quant Chem 79: 47–55, 2000     

Synthesis of poly(N‐[tris(hydroxymethyl)methyl]acrylamide) functionalized porous silica for application in hydrophilic interaction chromatography

Porous silica coated by a highly hydrophilic and nonionic tentacle‐type polymeric layer was synthesized by free radical “grafting from” polymerization of N‐[2‐hydroxy‐1,1‐bis(hydroxymethyl)ethyl]‐2‐propenamide (TRIS‐acrylamide) in partly aqueous solutions. The radical initiator sites were incorporated on the silica surfaces via a two‐step reaction comprising thionyl chloride activation and subsequent reaction with tert‐butyl hydroperoxide. The surface‐bound tert‐butylperoxy groups were then used as thermally triggered initiators for graft polymerization of TRIS‐acrylamide. The synthesized materials were characterized by diffusive reflectance Fourier transform infrared specotroscopy, X‐ray photoelectron spectroscopy, and CHN elemental analysis. Photon correlation spectroscopy was used to determine changes in ζ‐potentials resulting from grafting, ²⁹Si magic angle spinning nuclear magnetic resonance spectroscopy (MAS‐NMR) spectroscopy was used to assess the ratio of silanol to siloxane groups in the substrate and the grafted material, and the changes in surface area and mesopore distribution were determined by nitrogen cryosorption. Chromatographic evaluation in hydrophilic interaction chromatography (HILIC) mode showed that the materials were suitable for use as stationary phases, featuring good separation efficiency, a comparatively high retention, and a selectivity that differed from most commercially available HILIC phases. A comparison of this neutral phase with a previously reported N‐(2‐hydroxypropyl)‐linked TRIS‐type hydrophilic tentacle phase with weak anion exchange functionality revealed substantial differences in retention patterns.     

The Synthesis of tert‐Butyl(dichloromethyl)bis(trimethylsilyl)silane and (Dibromomethyl)ditert‐butyl(trimethylsilyl)silane and their Reactions with Organolithium Derivatives

tert‐Butyl(dichloromethyl)bis(trimethylsilyl)silane ( 4 ), prepared by the reaction of tert‐butylbis(trimethylsilyl)silane with trichloromethane and potassium tert‐butoxide, reacted with 2,4,6‐triisopropylphenyllithium (TipLi) (molar ratio 1 : 2) at room temperature to give (after hydrolytic workup) the silanol tBu(2,4,6‐iPr₃C₆H₂)Si(OH)–CH(SiMe₃)₂ ( 15 ). The formation of 15 is discussed as proceeding through the indefinitely stable silene tBu(2,4,6‐iPr₃C₆H₂)Si=C(SiMe₃)₂ ( 13 ), but attempts to isolate the compound failed. Treatment of (dibromomethyl)ditert‐butyl(trimethylsilyl)silane ( 7 ), made from tBu₂(Me₃Si)SiH, HCBr₃ and KOtBu, with methyllithium (1 : 3) at –78 °C afforded tBu₂MeSi–CHMeSiMe₃ ( 19 ); 7 and phenyllithium (1 : 3) under similar conditions gave tBu₂PhSi–CH₂SiMe₃ ( 20 ). The reaction paths leading to 15 , 19 and 20 are discussed. Reduction of 7 with lithium in THF produced the substituted ethylene tBu₂(Me₃Si)SiCH=CHSitBu₂SiMe₃ ( 21 ). For 21 the results of an X‐ray structural analysis are given.     

Bis(tert‐butyldimethylsilyl)(2,6‐diisopropylphenyl)phosphane: the first structure of an organophosphane with two tert‐butyldimethylsilyl (TBDMS) substituents

The title compound, C₂₄H₄₇PSi₂, is the first organophosphane bearing two tert‐butyldimethylsilyl (TBDMS) groups to be crystallographically characterized, even though TBDMS is a very popular bulky silyl group. The structure is a considerably flattened trigonal pyramid, with the sum of the C/Si—P—C/Si angles being 333.35 (6)°, which can be attributed to the steric pressure from the three bulky groups. The P—Si distances [2.2605 (6) and 2.2631 (6) Å] are normal, while the P—C distance [1.8646 (12) Å] is long (outside the s.u. values) compared with related structures. The plane of the aryl ring approximately bisects the Si—P—Si angle, quite unlike the secondary (tert‐butyldimethylsilyl)(2,6‐diisopropylphenyl)phosphane bearing only one TBDMS group, in which the single Si atom is perpendicular to the aryl ring. The title structure conforms closely to that predicted from B3LYP/6‐31G(d) calculations, although the calculations overestimate the degree of planarity. The compound crystallizes centrosymmetrically in the space group P as isolated molecules.     

Adsorption of aqueous Hg (II) by a novel poly(aniline‐co‐o‐aminophenol)/mesoporous silica SBA‐15 composite

A novel poly(aniline‐co‐o‐aminophenol) (PAOA)/mesoporous silica SBA‐15 nanocomposite was synthesized and investigated for adsorption of Hg (II) from aqueous solutions of wide pH range. A chemical oxidation method was employed for polymerization of aniline and o‐aminophenol on an ordered SBA‐15 template to obtain a significantly enlarged BET surface area of the adsorbent. Efficiency study revealed that the PAOA/SBA‐15 could reach a maximum Hg (II) adsorption capacity of over 400 mg/g. Kinetic study showed that the Hg (II) adsorption by the PAOA/SBA‐15 fitted a pseudo‐second‐order kinetic model, indicating that the mercury adsorption process was predominantly controlled by chemical process. The results of this study also proved that the adsorbed Hg (II) could be effectively desorbed from the PAOA/SBA‐15 in 0.1M HCl and 5% sulfocarbonide solutions. Associated adsorption mechanism was also investigated by means of Fourier transform infrared (FTIR) and X‐ray photoelectron spectroscopy (XPS) techniques. Copyright © 2010 John Wiley & Sons, Ltd.     

The antioxidant methyl 3‐(3,5‐di‐tert‐butyl‐4‐hydroxyphenyl)propionate

The title compound, C₁₈H₂₈O₃, was prepared by the reaction of 2,6‐di‐tert‐butylphenol with methyl acrylate under basic conditions using dimethyl sulfoxide as the promoter. The structure of this antioxidant indicates significant strain between the ortho tert‐butyl substituents and the phenolic OH group. In spite of the steric crowding of the OH group, it participates in intermolecular hydrogen bonding with the ester carbonyl O atom.     

Two isomorphous ZnII/CoII complexes with tri‐tert‐butoxysilanethiol and histamine,and (4‐hydroxymethyl‐1H‐imidazole‐κN)bis(tri‐tert‐butoxysilanethiolato‐κ2O,S)zinc(II)

The complexes [2‐(1H‐imidazol‐4‐yl‐κN³)ethylamine‐κN]bis(tri‐tert‐butoxysilanethiolato‐κS)cobalt(II), [Co(C₁₂H₂₇O₃SSi)₂(C₅H₉N₃)], and [2‐(1H‐imidazol‐4‐yl‐κN³)ethylamine‐κN]bis(tri‐tert‐butoxysilanethiolato‐κS)zinc(II), [Zn(C₁₂H₂₇O₃SSi)₂(C₅H₉N₃)], are isomorphous. The central Zn^II/Co^II ions are surrounded by two S atoms from the tri‐tert‐butoxysilanethiolate ligand and by two N atoms from the chelating histamine ligand in a distorted tetrahedral geometry, with two intramolecular N—H...O hydrogen‐bonding interactions between the histamine NH₂ groups and tert‐butoxy O atoms. Molecules of the complexes are joined into dimers via two intermolecular bifurcated N—H...(S,O) hydrogen bonds. The Zn^II atom in [(1H‐imidazol‐4‐yl‐κN³)methanol]bis(tri‐tert‐butoxysilanethiolato‐κ²O,S)zinc(II), [Zn(C₁₂H₂₇O₃SSi)₂(C₄H₆N₂O)], is five‐coordinated by two O and two S atoms from the O,S‐chelating silanethiolate ligand and by one N atom from (1H‐imidazol‐4‐yl)methanol; the hydroxy group forms an intramolecular hydrogen bond with sulfur. Molecules of this complex pack as zigzag chains linked by N—H...O hydrogen bonds. These structures provide reference details for cysteine‐ and histidine‐ligated metal centers in proteins.     

Surface Charge‐Transfer Doping of Graphene Nanoflakes Containing Double‐Vacancy (5‐8‐5) and Stone–Wales (55‐77) Defects through Molecular Adsorption

The adsorption of six electron donor–acceptor (D/A) organic molecules on various sizes of graphene nanoflakes (GNFs) containing two common defects, double‐vacancy (5‐8‐5) and Stone–Wales (55‐77), are investigated by means of ab initio DFT [M06‐2X(‐D3)/cc‐pVDZ]. Different D/A molecules adsorb on a defect graphene (DG) surface with binding energies (ΔE_b) of about ?12 to ?28 kcal mol^?1. The ΔE_b values for adsorption of molecules on the Stone–Wales GNF surface are higher than those on the double vacancy GNF surface. Moreover, binding energies increase by about 10 % with an increase in surface size. The nature of cooperative weak interactions is analyzed based on quantum theory of atoms in molecules, noncovalent interactions plot, and natural bond order analyses, and the dominant interaction is compared for different molecules. Electron density population analysis is used to explain the n‐ and p‐type character of defect graphene nanoflakes (DGNFs) and also the change in electronic properties and reactivity parameters of DGNFs upon adsorption of different molecules and with increasing DGNF size. Results indicate that the HOMO–LUMO energy gap (E_g) of DGNFs decreases upon adsorption of molecules. However, by increasing the size of DGNFs, the E_g and chemical hardness of all complexes decrease and the electrophilicity index increases. Furthermore, the values of the chemical potential of acceptor–DGNF complexes decrease with increasing size, whereas those of donor–DGNF complexes increase.     

Attempt to Synthesize Hindered 2,4,6‐Tri‐Aryloxy‐s‐Triazines: Bis(2,4‐di‐tert‐Butylphenyl) Carbonate – Crystal Structure

Some less hindered 2,4,6‐tri‐aryloxy‐s‐triazines were synthesized through the reaction of the corresponding phenols as a starting materials with cyanogen bromide (BrCN) to obtain the corresponding arylcyanates and then trimerized. Unexpectedly, 2,4‐di‐tert‐butyl‐1‐cyanatobenzene derived from 2,4‐di‐tert‐butylphenol did not trimerize but, indeed, yielded bis(2,4‐di‐tert‐butylphenyl) carbonate. The structures of 2,4,6‐tri‐aryloxy‐s‐triazines and bis(2,4‐di‐tert‐butylphenyl) carbonate were characterized by means of IR, ¹H, and ¹³C NMR spectroscopies. Also the structure of the latter compound was studied by X‐ray crystallography.     

tert‐Butoxysilanols as model compounds for labile key intermediates of the sol–gel process: crystal and molecular structures of (t‐BuO)3SiOH and HO[(t‐BuO)2SiO]2H

The tert‐butoxychlorosilanes (t‐BuO)₃SiCl ( 1 ), (t‐BuO)₂SiCl₂ ( 2 ), and [(t‐BuO)₂SiCl]₂O ( 3 ) were prepared by the reaction of SiCl₄ or (Cl₃Si)₂O with t‐BuOK. Subsequent hydrolysis afforded the tert‐butoxysilanols (t‐BuO)₃SiOH ( 4 ), (t‐BuO)₂Si(OH)₂ ( 5 ), HO[(t‐BuO)₂SiO]₂H ( 6 ) in high yields. The controlled condensation of 2 and 5 provided HO[(t‐BuO)₂SiO]₃H ( 7 ) in reasonable yields. The tendency of 4 – 7 to undergo self‐condensation is small, thus enabling their characterization in solution and in the solid state by ²⁹Si NMR spectroscopy, IR spectroscopy and electrospray mass spectrometry, and in the case of 4 and 6 also by X‐ray diffraction. The key feature of the crystal structures is the incorporation of tert‐butoxy groups into the hydrogen bonding. The results obtained are discussed in relation to the sol–gel process. Copyright © 2002 John Wiley & Sons, Ltd.     

A Novel Chemoselective Cleavage of (tert‐Butyl)(dimethyl)silyl (TBS) Ethers Catalyzed by Ce(SO4)2⋅4 H2O

(tert‐Butyl)(dimethyl)silyl (^tBuMe₂Si; TBS) phenyl/alkyl ethers were efficiently cleaved to the corresponding parent hydroxy compounds in good yields using catalytic amounts of Ce(SO₄)₂?4 H₂O by microwave‐assisted or conventional heating in MeOH. Intramolecular and competitive experiments demonstrated the chemoselective deprotection of TBS ethers in the presence of triisopropylsilyl (ⁱPr₃Si; TIPS) and (tert‐butyl)(diphenyl)silyl (^tBuPh₂Si; TBDPS) ethers.     

A low‐temperature modification of hexa‐tert‐butyldisilane and a new polymorph of 1,1,2,2‐tetra‐tert‐butyl‐1,2‐diphenyldisilane

Crystals of hexa‐tert‐butyldisilane, C₂₄H₅₄Si₂, undergo a reversible phase transition at 179 (2) K. The space group changes from Ibca (high temperature) to Pbca (low temperature), but the lattice constants a, b and c do not change significantly during the phase transition. The crystallographic twofold axis of the molecule in the high‐temperature phase is replaced by a noncrystallographic twofold axis in the low‐temperature phase. The angle between the two axes is 2.36 (4)°. The centre of the molecule undergoes a translation of 0.123 (1) Å during the phase transition, but the conformation angles of the molecule remain unchanged. Between the two tri‐tert‐butylsilyl subunits there are six short repulsive intramolecular C—H...H—C contacts, with H...H distances between 2.02 and 2.04 Å, resulting in a significant lengthening of the Si—Si and Si—C bonds. The Si—Si bond length is 2.6863 (5) Å and the Si—C bond lengths are between 1.9860 (14) and 1.9933 (14) Å. Torsion angles about the Si—Si and Si—C bonds deviate by approximately 15° from the values expected for staggered conformations due to intramolecular steric H...H repulsions. A new polymorph is reported for the crystal structure of 1,1,2,2‐tetra‐tert‐butyl‐1,2‐diphenyldisilane, C₂₈H₄₆Si₂. It has two independent molecules with rather similar conformations. The Si—Si bond lengths are 2.4869 (8) and 2.4944 (8) Å. The C—Si—Si—C torsion angles deviate by between −3.4 (1) and −18.5 (1)° from the values expected for a staggered conformation. These deviations result from steric interactions. Four Si—C(t‐Bu) bonds are almost staggered, while the other four Si—C(t‐Bu) bonds are intermediate between a staggered and an eclipsed conformation. The latter Si—C(t‐Bu) bonds are about 0.019 (2) Å longer than the staggered Si—C(t‐Bu) bonds.     

Novel regular polyimide‐graft‐(polymethacrylic acid) brushes: Synthesis and possible applications as nanocontainers of cyanoporphyrazine agents for photodynamic therapy

An approach to the synthesis of new regular graft‐copolymers polyimide (PI)‐graft‐polymethacrylic acid is elaborated, including (1) synthesis of multicenter PI macroinitiators, (2) controlled ATRP of tert‐butylmethacrylate on the prepared macroinitiators, and (3) protonolysis of tert‐butyl ester groups of side chains of the resulting PI‐graft‐poly(tert‐butylmethacrylate). Experimental conditions for attaining complete conversions of the first and the third stages of the process are determined by means of ¹H NMR and FTIR‐spectroscopy. Polymer products of the first and the second stages of the process, as well as poly(tert‐butylmethacrylate) side chains cleaved from the PI‐graft‐poly(tert‐butylmethacrylate) copolymers by complete decomposition of the PI backbone under alkaline hydrolysis conditions, are characterized by GPC. The kinetics of poly(tert‐butylmethacrylate) chain growth on a PI macroinitiator under ATRP conditions are studied. The results obtained provide evidence for the controlled character of the ATRP process and the regular structure of the synthesized graft‐copolymers. It is shown that PI‐g‐PMAA PI brushes are significantly more efficient intracellular delivery agents for the potential photosensitizer [tetra(4‐fluorophenyl)tetracyanoporhyrazine free base] than are the commonly used PEG‐micelles. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 4267–4281