Hydrate film growth at the interface between gaseous CO2 and sodium chloride solution

Greenhouse gas CO₂ has become a serious problem for human beings. The hydrate technology has been considered as a possible approach to sequester CO₂. In this work, the lateral growth rates of a CO₂ hydrate film in aqueous NaCl solutions of different concentrations were measured by means of suspending a single gas bubble in liquid. The results show that the film growth rates depended on not only the driving force, but also the NaCl concentration, and the film growth rates decreased with the increasing NaCl concentration. The simple relationship v_f∝ΔT ^5/2 could be used to correlate the hydrate film growth rate of a CO₂ + NaCl + water system by introducing a NaCl concentration-dependent coefficient. The film thickness was investigated experimentally and evaluated theoretically; the results show that it became thicker at a higher NaCl concentration when the temperature and pressure were specified. In addition, a series of interesting phenomena, such as the occurrence of double hydrate films, were displayed and discussed. Supported by the National Natural Science Foundation of China (Grant Nos. 20676145 & U0633003) and the Program for New Century Excellent Talents in University (Grant No. NCET-07-0842)     

气体水合物膜生长动力学研究进展

由于大多数水合物客体不溶于水,水相与客体相界面首先形成一层气体水合物膜,气体水合物膜生长是水合物生长的主要形式,研究水合物膜生长规律对于理解水合物生长动力学及进一步开发促进和抑制水合物生长的应用技术具有重要意义.本文综述了近年来气体水合物膜生长形态、横向生长和增厚生长的理论和实验研究进展.首先介绍了不同客体-水体系(包括气/液界面、液/液界面和气-液-液体系)形成的水合物膜生长形态随实验条件的变化规律,然后分别从横向生长和增厚生长两方面总结了水合物膜生长的实验和模型方面的研究工作,阐述了常见的膜生长速率和膜厚度的测量方法,分析了水合物膜生长的传热和传质机理.同时展望了未来水合物膜生长研究的发展方向.     

Hydrate film growth on the surface of a gas bubble suspended in water

The lateral film growth rate of CH4, C2H4, CO2, CH4 + C2H4, and CH4 + C3H8 hydrates in pure water were measured at four fixed temperatures of 273.4, 275.4, 277.4, and 279.4 K by means of suspending a single gas bubble in water. The results showed that the lateral growth rates of mixed-gas CH4 + C2H4 hydrate films were slower than that of pure gas (CH4 or C2H4) for the same driving force and that of mixed-gas CH4 + C3H8 hydrate film growth was the slowest. The dependence of the thickness of hydrate film on the driving force was investigated, and it was demonstrated that the thickness of hydrate film was inversely proportional to the driving force. It was found that the convective heat transfer control model reported in the literature could be used to formulate the lateral film growth rate v(f) with the driving force DeltaT perfectly for all systems after introduction of the assumption that the thickness of hydrate films is inversely proportional to the driving force DeltaT; i.e., v(f) = psiDeltaT(5/2) is correct and independent of the composition of gas and the type of hydrate. The thicknesses of different gas hydrate films were estimated, and it is demonstrated that the thicknesses of mixed-gas hydrate films were thicker than those of pure gases, which was qualitatively consistent with the experimental result.     

Hydrate-based carbon dioxide capture from simulated integrated gasification combined cycle gas

The equilibrium hydrate formation conditions for CO2/H2 gas mixtures with different CO2 concentrations in 0.29 mol% TBAB aqueous solution are firstly measured.The results illustrate that the equilibrium hydrate formation pressure increases remarkably with the decrease of CO2 concentration in the gas mixture.Based on the phase equilibrium data,a three stages hydrate CO2 separation from integrated gasification combined cycle (IGCC) synthesis gas is investigated.Because the separation efficiency is quite low for the third hydrate separation,a hybrid CO2 separation process of two hydrate stages in conjunction with one chemical absorption process (absorption with MEA) is proposed and studied.The experimental results show H2 concentration in the final residual gas released from the three stages hydrate CO2 separation process was approximately 95.0 mol% while that released from the hybrid CO2 separation process was approximately 99.4 mol%.Thus,the hybrid process is possible to be a promising technology for the industrial application in the future.     

Effect of 1-butyl-3-methylimidazolium tetrafluoroborate on the formation rate of CO2 hydrate

The effect of the addition of 1-butyl-3-methylimidazolium tetrafluoroborate （[C4mim][BF4]） on the formation rates of CO2 hydrates was investigate. The isothermal and isobaric methods were used to measure the formation rates of CO2 hydrates. As compared to those of pure water, the data of phase equilibrium changed greatly. The effects of pressure, temperature, and the concentration of [C4mim][BF4] aqueous solution on the formation rates of CO2 hydrates were investigated. With a constant concentration of [C4mim][BF4], the rate of gas consumption was enhanced with the lowering of experimental temperature. However, a decrease in pressure exerted an opposite effect on the rate of gas consumption. Moreover, the addition of [C4mim][BF4] raised the equilibrium pressure of hydrate formation at the same temperature.     

Accelerated nucleation of tetrahydrofuran(THF)hydrate in presence of ZIF-61

Clathrate hydrate can be used in energy gas storage and transportation,CO 2 capture and cool storage etc.However,these technologies are difficult to be used due to the low formation rate and long induction time of hydrate formation.In this paper,ZIF-61(zeolite imidazolate framework,ZIF) was first used in hydrate formation to stimulate hydrate nucleation.As an additive of clathrate hydrate,ZIF-61 promoted obviously the acceleration of tetrahydrofuran(THF) hydrate nucleation.It shortened the induction time of THF hydrate formation from 2-5 h to 0.3-1 h mainly due to the template function of ZIF-61 by which the nucleation of THF hydrate has been promoted.     

甲烷水合物膜生长动力学研究

采用水中悬浮气泡法测定了温度为273.4～279.4 K、压力为3.60～11.90 MPa范围内甲烷微小气泡表面水合物膜生长动力学数据. 应用无因次Gibbs自由能差(－ΔG^exp/RT)作为推动力, 提出了具物理意义的水合物膜生长动力学模型, 并回归得到甲烷水合物膜生长动力学反应级数为1.60, 表观活化能为55.95 kJ•mol^－1, 指前因子为1.65×10¹¹ mm²•s^－1. 同时考察了温度和压力对甲烷水合物膜生长速率的影响.     

Effect of temperature fluctuation on hydrate-based CO_2 separation from fuel gas

A new method of temperature fluctuation is proposed to promote the process of hydrate-based CO2 separation from fuel gas in this work according to the dual nature of CO2 solubility in hydrate forming and non-hydrate forming regions [1].The temperature fluctuation operated in the process of hydrate formation improves the formation of gas hydrate observably.The amount of the gas consumed with temperature fluctuation is approximately 35% more than that without temperature fluctuation.It is found that only the temperature fluctuation operated in the period of forming hydrate leads to a good effect on CO2 separation.Meanwhile,with the proceeding of hydrate formation,the effect of temperature fluctuation on the gas hydrate gradually reduces,and little effect is left in the completion term.The CO2 separation efficiencies in the separation processes with the effective temperature fluctuations are improved remarkably.     

Kinetic hydrate inhibitor performance of new copolymer poly(N-vinyl-2-pyrrolidone-co-2-vinyl pyridine)s with TBAB

In oil and gas field, the application of kinetic hydrate inhibitors (KHIs) independently has remained problematic in high subcooling and high water-cut situation. One feasible method to resolve this problem is the combined use of KHIs and some synergists, which would enhance KHIs’ inhibitory effect on both hydrate nucleation and hydrate crystal growth. In this study, a novel kind of KHI copolymer poly(N-vinyl-2-pyrrolidone-co-2-vinyl pyridine)s (HGs) is used in conjunction with TBAB to show its high performance on hydrate inhibition. The performance of HGs with different monomer ratios in structure II tetrahydrofuran (THF) hydrate is investigated using kinetic hydrate inhibitor evaluation apparatus by step-cooling method and isothermal cooling method. With the combined gas hydrate inhibitor at the concentration of 1.0 wt%, the induction time of 19 wt% THF solution could be prolonged to 8.5 h at a high subcooling of 6℃. Finally, the mechanism of HGs inhibiting the formation of gas hydrate is proposed.     

Molecular dynamics simulations for the growth of CH4-CO2 mixed hydrate

Molecular dynamics simulations are performed to study the growth mechanism of CH4-CO2 mixed hydrate in xco2 = 75%, xco2 = 50%, and zco2 = 25% systems at T = 250 K, 255 K and 260 K, respectively. Our simulation results show that the growth rate of CH4-CO2 mixed hydrate increases as the CO2 concentration in the initial solution phase increases and the temperature decreases. Via hydrate formation, the composition of CO2 in hydrate phase is higher than that in initial solution phase and the encaging capacity of CO2 in hydrates increases with the decrease in temperature. By analysis of the cage occupancy ratio of CH4 molecules and CO2 molecules in large cages to small cages, we find that CO2 molecules are preferably encaged into the large cages of the hydrate crystal as compared with CH4 molecules. Interestingly, CH4 molecules and CO2 molecules frequently replace with each other in some particular cage sites adjacent to hydrate/solution interface during the crystal growth process. These two species of guest molecules eventually act to stabilize the newly formed hydrates, with CO2 molecules occupying large cages and CH4 molecules occupying small cages in hydrate.     

Multiscale approach to CO2 hydrate formation in aqueous solution: phase field theory and molecular dynamics. Nucleation and growth

A phase field theory with model parameters evaluated from atomistic simulations/experiments is applied to predict the nucleation and growth rates of solid CO(2) hydrate in aqueous solutions under conditions typical to underwater natural gas hydrate reservoirs. It is shown that under practical conditions a homogeneous nucleation of the hydrate phase can be ruled out. The growth rate of CO(2) hydrate dendrites has been determined from phase field simulations as a function of composition while using a physical interface thickness (0.85+/-0.07 nm) evaluated from molecular dynamics simulations. The growth rate extrapolated to realistic supersaturations is about three orders of magnitude larger than the respective experimental observation. A possible origin of the discrepancy is discussed. It is suggested that a kinetic barrier reflecting the difficulties in building the complex crystal structure is the most probable source of the deviations.     

钻井液添加剂对形成天然气水合物的影响

针对深水钻井中水基钻井液易形成天然气水合物从而导致钻井作业无法正常进行的问题,利用自行设计研制的气体水合物反应装置,模拟深水钻井温度压力条件,对水基钻井液添加剂进行了天然气水合物形成的实验研究。分析了各实验体系形成水合物的过冷度。以过冷度为评价指标,评价了各种钻井液添加剂在深水钻井水合物形成过程中的作用。结果表明,在钻井液使用的加量范围内,阳离子聚丙烯酰胺CPAM、两性离子聚合物FA367等对天然气水合物的形成有抑制作用,且随着加量的增加抑制作用增强;磺甲基丹宁SMT、木质素磺酸盐FCLS对天然气水合物的形成有微弱的促进作用,但影响不大。聚合物添加剂的离子类型对天然气水合物的形成影响不大。     

The influence of SO2 and NO2 impurities on CO2 gas hydrate formation and stability

The sequestration of industrially emitted CO(2) in gas hydrate reservoirs has been recently discussed as an option to reduce atmospheric greenhouse gas. This CO(2) contains, despite much effort to clean it, traces of impurities such as SO(2) and NO(2) . Here, we present results of a pilot study on CO(2) hydrates contaminated with 1% SO(2) or 1% NO(2) and show the impact on hydrate formation and stability. Microscopic observations show similar hydrate formation rates, but an increase in hydrate stability in the presence of SO(2). Laser Raman spectroscopy indicates a strong enrichment of SO(2) in the liquid and hydrate phase and its incorporation in both large and small cages of the hydrate lattice. NO(2) is not verifiable by laser Raman spectroscopy, only the presence of nitrate ions could be confirmed. Differential scanning calorimetry analyses show that hydrate stability and dissociation enthalpy of mixed CO(2)-SO(2) hydrates increase, but that only negligible changes arise in the presence of NO(2) impurities. X-ray diffraction data reveal the formation of sI hydrate in all experiments. The conversion rates of ice+gas to hydrate increase in the presence of SO(2), but decrease in the presence of NO(2). After hydrate dissociation, SO(2) and NO(2) dissolved in water and form strong acids.     

氯盐溶液中甲烷水合物高压分解条件及影响因素

向水合物储层注入盐类溶液是水合物常规开采技术之一,所以必须掌握储层压力条件下盐类溶液中水合物分解条件及其影响因素.本文研究了NaCl、MgCl2、CaCl2氯盐溶液中甲烷水合物分解条件,结果表明NaCl(2.0、1.0、0.5 mol·L-1)、MgCl2 (1.0、0.5 mol·L-1)和CaCl2 (1.0、0.5 mol·L-1)溶液中甲烷水合物的分解温度比纯水中分别降低了(4.8、2.4、1.0 K (NaCl))、(5.3、1.5 K (MgCl2))和(4.3、1.8 K (CaCl2)).以van der Waals 和Platteeuw 热力学模型为基础,结合电解质溶液中水的活度方程(Pitzer-Mayorga 方程),给出了氯盐溶液中水合物分解条件热力学模型,进而比较了模型计算值与实验值,结果显示两者非常吻合.分析表明,氯盐溶液中离子静电作用产生的水分子溶剂化效应和盐析效应降低了水的活度而导致水合物分解温度降低.     

CO2 capture from binary mixture via forming hydrate with the help of tetra-n-butyl ammonium bromide

Hydrate formation rate and separation effect on the capture of CO2 from binary mixture v/a forming hydrate with 5 wt% tetra-n-butyl ammonium bromide (TBAB) solution were studied.The results showed that the induction time was 5 min,and the hydrate formation process pressure of 7.30 MPa.The CO2 recovery was about 45% in the feed pressure range from 4.30 to 7.30 MPa.Under the feed pressure of 4.30 MPa,the maximum separation factor and CO2 concentration in hydrate phase were 7.3 and 38.2 tool%,respectively.The results demonstrated that TBAB accelerated hydrate formation and enriched CO2 in hydrate phase under the gentle condition.     

Kinetic Analysis of Methane Hydrate Formation with Butterfly Turbine Impellers

Heat generation during gas hydrate formation is an important problem because it reduces the amount of water and gas that become gas hydrates. In this research work, we present a new design of an impeller to be used for hydrate formation and to overcome this concern by following the hydrodynamic literature. CH₄ hydrate formation experiments were performed in a 5.7 L continuously stirred tank reactor using a butterfly turbine (BT) impeller with no baffle (NB), full baffle (FB), half baffle (HB), and surface baffle (SB) under mixed flow conditions. Four experiments were conducted separately using single and dual impellers. In addition to the estimated induction time, the rate of hydrate formation, hydrate productivity and hydrate formation rate, constant for a maximum of 3 h, were calculated. The induction time was less for both single and dual-impeller experiments that used full baffle for less than 3 min and more than 1 h for all other experiments. In an experiment with a single impeller, a surface baffle yielded higher hydrate growth with a value of 42 × 10⁻⁸ mol/s, while in an experiment with dual impellers, a half baffle generated higher hydrate growth with a value of 28.8 × 10⁻⁸ mol/s. Both single and dual impellers achieved the highest values for the hydrate formation rates that were constant in the full-baffle experiments.     

Formation process and fractal growth model of HCFC-141b refrigerant gas hydrate

The microscopic visualization experiment on the formation process of HCFC-141b refrigerant gas hydrate has been investigated, and the morphological photos of hydrate formation process have been obtained. The results show that gas hydrate originally nucleated on the interface of refrigerant HCFC-141b and water under the condition of supercooling, then the hydrate grows continually due to the inducement of formed nucleation and diffusion of refrigerant. The formation of gas hydrate presents an arboreous phenomenon. The fractal dimension of the hydrate formation morphology on different stages was calculated. The calculating results indicate that the initial stage of the hydrate formation belongs to fractal growth, and the dimension is about 1.52. Based on the fractal theory, an RIN-DLA (random inducement nucleation-diffusion limited aggregation) model for the HCFC-141b hydrate growth was developed. The hydrate growth process was simulated with the developed model, and the fractal dimension for the simulated     

R12 hydrate formation kinetics based on laser light scattering technique

Gas hydrates are non-stoichiometric crystalline compounds of water with gas at a certain temperature and pressure. Compared to the thermodynamics of hydrate formation, our knowledge on the kinetics aspect is rather immature. It is well known that the kinetics of hydrate formation/dissociation plays an important role in many industrial cases, such as the exploitation of methane hydrate underground, the storage and transportation of natural gas in solid hydrate state, the inhibition of hydrate i…     

Experimental studies of the formation and dissociation of methane hydrate in loess

In order to study the nature of gas hydrate in porous media, the formation and dissociation processes of methane hydrate in loess were investigated. Five cooling rates were applied to form methane hydrate. The nucleation times of methane hydrate formation at each cooling rate were measured for comparison. The experimental results show that cooling rate is a significant factor affecting the nucleation of methane hydrate and gas conversion. Under the same initial conditions, the faster the cooling rate, the shorter the nucleation time, and the lower the methane gas conversion. Five dissociating temperatures were applied to conduct the dissociation experiment of methane hydrate formed in loess. The experimental results indicated that the temperature evidently controlled the dissociation of methane hydrate in loess and the higher the dissociating temperature, the faster the dissociating rates of methane hydrate.     

Time-resolved in situ neutron diffraction studies of gas hydrate: transformation of structure II (sII) to structure I (sI).

We report the in situ observation from diffraction data of the conversion of a gas hydrate with the structure II (sII) lattice to one with the structure I (sI) lattice. Initially, the in situ formation, dissociation, and reactivity of argon gas clathrate hydrate was investigated by time-of-flight neutron powder diffraction at temperatures ranging from 230 to 263 K and pressures up to 5000 psi (34.5 MPa). These samples were prepared from deuterated ice crystals and transformed to hydrate by pressurizing the system with argon gas. Complete transformation from D(2)O ice to sII Ar hydrate was observed as the sample temperature was slowly increased through the D(2)O ice melting point. The transformation of sII argon hydrate to sI hydrate was achieved by removing excess Ar gas and exposing the hydrate to liquid CO(2) by pressurizing the Ar hydrate with CO(2). Results suggest the sI hydrate formed from CO(2) exchange in argon sII hydrate is a mixed Ar/CO(2) hydrate. The proposed exchange mechanism is consistent with clathrate hydrate being an equilibrium system in which guest molecules are exchanging between encapsulated molecules in the solid hydrate and free molecules in the surrounding gas or liquid phase.