含有双酚A链段的聚氨酯网络研究

首先合成与表征了一种含有双酚A结构的多元醇,通过添加这种多元醇至聚氧化丙烯聚醚多元醇中合成了含有双酚A链段的聚氨酯网络。通过DSC、FTIR和SEM等方法考察了这类聚氨酯网络的结构形态,研究结果表明,PU网络中的双酚A链段与聚氧化丙烯链段不相容,而且破坏了PU硬段的有序化结构。在聚氧化丙烯聚醚多元醇中添加5－10phr双酚A结构的多醇就能显著地提高聚氨酯网络的拉伸强度、弹性模量和断裂伸长率。     

细胞色素b5突变体(E44A/E48A/E56A/D60A)的溶液结构研究

电子传递反应是光合作用和生物氧化等一系列重要生物过程的基本反应[1],为阐明细胞色素b5和c的静电结合模型,1993年Northrup等[3]用Brownian动态模拟预言的这两个蛋白结合模型有两种几何形态,根据以下模型设计了许多实验,但对两种模型都至关重要的细胞色素b5血红素暴霞棱周围的4个残基E44,48,56T D60对蛋白质复合物的稳定性以及在蛋白质识别中的作用仍然不清楚,为了阐明这4个带负电的残基对细胞色素b5结构的影响,正确地揭示蛋白质相互作用的本质和机理,本文对牛肝微粒体细胞色素b5胰蛋白酶切割后水溶性部分的突变体(E44A/E48A/E56A/D60A)深液结构进行了研究.     

Investigation of the surface structure of zeolite A

The surface structure of zeolite A was investigated by FE-SEM, AFM, and HRTEM. First, it was shown by FE-SEM and AFM that the surface of zeolite A terminated with the same structure. Then, by combining the results with those of HRTEM, the terminal structure of zeolite A was identified as incomplete sodalite cages.     

Stability of the formation of the chevron structure

A simple model of the formation of the chevron structure and tilted layer structure in the smectic C liquid crystal phase from the bookshelf structure in the smectic A phase is considered. Energetic considerations of this system indicate that in the absence of layer pinning forces at the surface, a transition to the tilted structure is expected. However, combining the model with 'weak' surface positional anchoring effects allows the chevron structure to form.     

Inorganic Crystal Structure Data to be Presented in a Form More Useful for Further Studies

To make inorganic structure data more useful for further studies a five-point list of simple procedures to be followed by authors of crystal structure papers is proposed. 1. A crystal structure should be described with the space group corresponding to its true symmetry. 2. A new structure proposal should be tested, if it is realistic in principle. 3. A structure should be described with a space group in a setting given in the International Tables. 4. For a comparison with other structures the structure data should be standardized with the program STRUCTURE TIDY. 5.“New” structure data should be checked in the databases, Chemical Abstracts or on-line intemet resources, if they are really new. The list is supplemented with many explanations, commentaries, examoles and references.     

Stabilization of new forms of the intermetallic phases beta-RENiGe2 (RE = Dy, Ho, Er, Tm, Yb, Lu) in liquid indium

Flux conditions using liquid indium bypass the thermodynamically stable structure and yield new forms of the phases RENiGe2 (RE = Dy, Er, Yb, Lu). The compounds crystallize in the orthorhombic Immm space group and possess the YIrGe2 structure type. Lattice parameters for ErNiGe2, DyNiGe2, YbNiGe2, and LuNiGe2 are a = 4.114(1) A, b = 8.430(2) A, c = 15.741(5) A; a = 4.1784(9) A, b = 8.865(2) A, c = 15.745(3) A; a = 4.0935(6) A, b = 8.4277(13) A, c = 15.751(2) A, and a = 4.092(1) A, b = 8.418(3) A, c = 15.742(5) A, respectively. These phases represent a new structural arrangement (beta) of the compound type RENiGe2 as another set of compounds with identical stoichiometry are known to adopt the orthorhombic Cmcm CeNiSi2 type structure (alpha). In this paper we report the crystal and electronic band structure of four new members of the YIrGe2 structure type, as well as an investigation of the relative thermodynamic stabilities of the two forms.     

Radical cation of dibenzothiophene fully annelated with bicyclo[2.2.2]octene units: X-ray crystal structure and electronic properties

New dibenzothiophene 2 fully annelated with bicyclo[2.2.2]octene units was synthesized and oxidized to stable radical cation salt 2(*+)SbCl(6)(-), whose structure was determined by X-ray crystallography. Although the intrinsic electronic structure of 2(*+) is predicted to be close to structure A, an interaction with the counteranion makes structure B contribute significantly. A part of the salt 2(*+)SbCl(6)(-) underwent rearrangement to arenium ion 6(+), whose structure was also clarified by X-ray crystallography.     

Synthesis of putative uniflorine A

A diastereoselective synthesis of the putative structure of the natural product uniflorine A has been achieved by using the Petasis borono-Mannich reaction and ring-closing metathesis as key steps. The NMR data of the synthetic material did not match that reported for the natural product. The structure of the final synthetic product was unequivocally determined by single-crystal X-ray study of its pentaacetate derivative. Thus it was concluded that the proposed structure of uniflorine A is incorrect.     

Binuclear homoleptic manganese carbonyls: Mn2(CO)x (x = 10, 9, 8, 7)

The unsaturated homoleptic manganese carbonyls Mn(2)(CO)(n)() (n = 7, 8, 9) are characterized by their equilibrium geometries, thermochemistry, and vibrational frequencies using methods from density functional theory (DFT). The computed metal-metal distances for global minima range from 3.01 A for the unbridged Mn(2)(CO)(10) with a Mn-Mn single bond to 2.14 A for a monobridged Mn(2)(CO)(7) formulated with a metal-metal quadruple bond. The global minimum for Mn(2)(CO)(9) has a four-electron bridging mu-eta(2)-CO group and a 2.96 A Mn-Mn distance suggestive of the single bond required for 18-electron configurations for both metal atoms. This structure is closely related to an experimentally realized structure for the isolated and structurally characterized stable phosphine complex [R(2)PCH(2)PR(2)](2)Mn(2)(CO)(4)(mu-eta(2)-CO). An unbridged (OC)(4)Mn-Mn(CO)(5) structure for Mn(2)(CO)(9) has only slightly (<6 kcal/mol) higher energy with a somewhat shorter metal-metal distance of 2.77 A. For Mn(2)(CO)(8) the lowest energy structure is a D(2)(d)() unbridged structure with a 2.36 A metal-metal distance suggesting the triple bond required for the favored 18-electron configuration for both metal atoms. However, the unbridged unsymmetrical (CO)(3)Mn-Mn(CO)(5) structure with a metal-metal bond distance of 2.40 A lies only 1 to 3 kcal/mol above this global minimum. The lowest energy structure of Mn(2)(CO)(7) is an unbridged C(s)() structure with a short metal-metal distance of 2.26 A. This is followed energetically by another C(s)() unbridged Mn(2)(CO)(7) structure with a somewhat longer metal-metal distance of 2.38 A.     

Étude des variations de structure du poly(vinyl-9-anthracène) en fonction de la concentration en amorceur

We have considered variations in the structure of poly(vinyl-9-anthracene) (PV9A) as a function of the concentration of initiator (TiCl₄). PV9A mainly has a structure “across the ring” but there is some anthracene nuclei corresponding to a normal polymer structure. We have shown by spectroscopic methods (i.r. u.v., ¹H-NMR and ¹³C-NMR) that the anthracene nuclei in PV9A form a structure corresponding to poly(dimethylene anthracene). This stucture results from partial re-aromatization of the “across the ring” structure in the presence of high levels of initiator.     

Synthesis and structure revision of litseaone A

Litseaone A, isolated from the stem barks of Litsea rubescens and Litsea pedunculata, is a chalcone derivative with a novel spiro-epoxide moiety. The structural revision of litseaone A was achieved by the racemic synthesis of the proposed structure and the asymmetric synthesis of the revised structure. The major tautomeric structure of litseaone A and the relative stereochemistry at the epoxide carbon center were also clarified.     

Biyouyanagin A, an anti-HIV agent from Hypericum chinense L. var. salicifolium

[structure: see text] A structurally unique hydrophobic compound, biyouyanagin A, was isolated from the MeOH extract of the leaves of Hypericum chinense L. var. salicifolium. The structure of biyouyanagin A was elucidated on the basis of spectroscopic evidence. Biyouyanagin A showed a significant activity against HIV and inhibited cytokine production.     

Formation of a new Ia-3d cubic meso-structured silica via triblock copolymer-assisted synthesis

A new mesoporous silica structure with cubic Iad symmetry has been synthesized. The structure has very large unit cell dimensions, up to 250 A in the as-synthesized form and 222 A after calcination, and the surface area is around 700 m2/g. The syntheses were done according to well-established synthesis conditions with the triblock copolymers Pluronics P103 or P123, except for the addition of NaI to the synthesis mixture. Small-angle X-ray scattering revealed that the sample has Iad symmetry. According to electron micrographs, the structure is similar to that of MCM-48, and we thus propose that the structure lies on the gyroid minimal surface.     

Total synthesis of proposed amphidinolide A via a highly selective ring-closing metathesis

[structure: see text] A highly convergent synthesis of the proposed structure of amphidinolide A is reported. Instructive applications of several organometallic processes are illustrated, including a highly selective ring-closing metathesis reaction.     

A Compact Approach to an Isomeric Iheyamine A System and X-ray Crystal Structure of 5-Methyl-5H-azepino[2,3- b :4,5- b ′]diindole

A compact three-step synthesis of a new fused bisindole system isomeric with the heterocyclic skeleton present in the marine natural product iheyamine A has been achieved. The structure of the synthetic product was confirmed by a single-crystal X-ray structure.     

Studies toward the total synthesis of the cytotoxic sponge alkaloid pyrinodemin A

[structure: see text]. The syntheses of the proposed structure of pyrinodemin A (1) and its cis double bond positional isomer (C15'-C16') in racemic form are described. The key reaction involved an intramolecular nitrone/double bond cycloaddition. Our results suggest that neither 1 nor its double positional isomer is the correct structure of pyrinodemin A     

Structure of bistramide A-actin complex at a 1.35 angstroms resolution

Bistramide A is a highly potent antiproliferative marine natural product from Lissoclinum bistratum. We have previously established actin as the primary cellular receptor of bistramide A. We report herein the X-ray structure of bistramide A bound to monomeric actin at a resolution of 1.35 A. The most notable aspect of the bistramide A-actin structure is an extensive hydrogen-bonding network established upon a deep penetration of the central segment of bistramide A into the actin-binding cleft between subdomains 1 and 3. The structure presents the first insight into the observed ability of bistramide A to modulate G-actin polymerization. The structural information combined with our ability to chemically modify the bistramide framework provides the basis for rational development of a series of new synthetic analogues as useful probes for studying actin cytoskeleton and as potential therapeutic leads.     

On the vibronic structure of all-trans-retinal in different environments

The great sensitivity of the electronic structure of a polyene in different environments is visualized through the all-trans-retinal molecule in solvents with different polarity. A vibronic structure in the ¹B_u⁺ ← ¹A_g⁻ transition of all-trans-retinal is detected in the second-derivative spectrum of the ordinary band-shape function. It consists mainly of a 1480 cm⁻¹ progression. Attempts to simulate this are presented. A correlation between the resolution in the vibronic structure and the polarity of the environment of retinal is found. A second excited state of all-trans-retinal may be responsible for the changes in the vibronic structure in the different solvents.     

Callynormine A, a new marine cyclic peptide of a novel class

[structure: see text] A novel cyclic peptide, callynormine A, was isolated from the Kenyan marine sponge Callyspongia abnormis and its structure elucidated by interpretation of its NMR data and X-ray diffraction analysis. Callynormine A represents a new class of heterodetic cyclic peptides (designated endiamino peptides) possessing an alpha-amido-beta-aminoacrylamide cyclization functionality.