One-dimensional and two-dimensional analogs for three-dimensional viscous flows in the neighborhood of the plane of symmetry of a blunt body

An approximate method of determining the heat transfer and friction stress in three-dimensional flow problems using the two-dimensional and one-dimensional solutions is proposed. This method is applicable over a wide range of Reynolds numbers — from low to high. On the basis of a theoretical analysis of the approximate analytic solution of the equations of a three-dimensional viscous shock layer it is shown that the problem of determining the heat flux in the neighborhood of the plane of symmetry of bodies inclined to the flow at an angle of attack can be reduced, firstly, to the problem of determining that quantity for an axisymmetric body and, secondly, to the problem of determining the heat transfer to an axisymmetric stagnation point. On the basis of an analysis of the results of a numerical solution of the problem it is shown that corresponding analogs can also be used for the friction stress. The accuracy of the similarity relations established is estimated by solving the problem by a finite-difference method. A similarity relation of the same kind was previously obtained in [1] for a double-curvature stagnation point.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 1, pp. 117–122, January–February, 1990.     

Axisymmetric analogy for three-dimensional viscous flow problems

A method of solving three-dimensional flow problems with the aid of two-dimensional solutions, which can be used for any Reynolds numbers, is proposed. The method is based on the use of similarity relations obtained in the theoretical analysis of the approximate analytic solution of the equations of a three-dimensional viscous shock layer. These relations express the heat flux and the friction stress on the lateral surface of a three-dimensional body in terms of the values on the surface of an axisymmetric body. The accuracy is estimated by comparing the results with those of a numerical finite-difference calculation of the flow past bodies of various shapes. Similar similarity relations were previously obtained in [1] for the plane of symmetry of a blunt body.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 6, pp. 111–118, November–December, 1991.The authors are grateful to G. A. Tirskii for his interest in their work.     

Similarity of three-dimensional and axisymmetric chemically-nonequilibrium flows in the neighborhood of a plane of symmetry

Three-dimensional chemically-nonequilibrium flow past blunt bodies in the neighborhood of the plane of symmetry is investigated within the framework of viscous shock layer theory. The similarity of three-dimensional and axisymmetric flows, previously established in [1] for a uniform gas, is extended to chemically-nonequilibrium gas flows. It is shown that the problem of determining the heat fluxes and friction stress in the neighborhood of the line of flow divergence can be reduced to the problem of determining these quantities for the axisymmetric body. The validity of the axisymmetric analogy is verified by carrying out numerical calculations for bodies of different shapes re-entering the earth's atmosphere along a gliding trajectory. Various models of surface catalytic activity are considered. The use of similarity relations makes it possible to apply existing programs for calculating axisymmetric flows to the solution of three-dimensional problems.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 2, pp. 115–120, March–April, 1990.     

Asymptotic solution of the two-dimensional equations for a thin viscous rarefied shock layer on a cold surface

Hypersonic rarefied flow past blunt bodies is studied in the continuum-free-molecular transition regime. On the basis of an asymptotic analysis three rarefied gas flow patterns are established depending on the relation between the relevant parameters of the problem. In the first regime corresponding to a cold surface asymptotic solutions of the equations of a thin viscous shock layer are derived at low Reynolds numbers in the axisymmetric and plane cases. Simple analytical expressions for the pressure and the heat transfer and friction coefficients are obtained as functions of the freestream parameters and the body geometry. With decrease in the Reynolds number the coefficients approach the values corresponding to free-molecular flow. In this regime a similarity parameter for the hypersonic rarefied flow past bodies is determined. The asymptotic solutions are compared with numerical solutions and the results of direct statistical simulation by the Monte Carlo method.     

Method of meridional sections in problems of a three-dimensional boundary layer

The difficulties and clumsiness of problems of calculating the heat transfer distribution over the surface of a body in a three-dimensional flow are well known. It is shown that this problem can be considerably simplified where the influence of the three-dimensionality of the flow, which in certain applications it is important to take into account, is only weak. In this case the three-dimensional problem can be reduced to a set of two-dimensional problems along the lines of meridional sections of the body. This has been demonstrated in detail with reference to the method of effective length or local similarity, which is widely used in engineering practice and is particularly justified in the the case of turbulent heat transfer law. However, in the three-dimensional case it is complicated by the need to calculate the distribution of the streamlines over the surface of the body [1–4]. In the presence of slight asymmetry of the flow the problem can be substantially simplified, mainly as a result of the demonstrated possibility of replacing (with quadratic accuracy) the streamlines by the lines of meridional sections. The possibility of an independent solution of the exact boundary layer equations along each meridional plane is demonstrated for the above-mentioned approximation (rule of meridional sections).Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 3, pp. 67–73, May–June, 1986.     

Unsteady three-dimensional viscous shock layer in nonuniform gas flow in the neighborhood of a stagnation point

The combined influence of unsteady effects and free-stream nonuniformity on the variation of the flow structure near the stagnation line and the mechanical and thermal surface loads is investigated within the framework of the thin viscous shock layer model with reference to the example of the motion of blunt bodies at constant velocity through a plane temperature inhomogeneity. The dependence of the friction and heat transfer coefficients on the Reynolds number, the shape of the body and the parameters of the temperature inhomogeneity is analyzed. A number of properties of the flow are established on the basis of numerical solutions obtained over a broad range of variation of the governing parameters. By comparing the solutions obtained in the exact formulation with the calculations made in the quasisteady approximation the region of applicability of the latter is determined. In a number of cases of the motion of a body at supersonic speed in nonuniform media it is necessary to take into account the effect of the nonstationarity of the problem on the flow parameters. In particular, as the results of experiments [1] show, at Strouhal numbers of the order of unity the unsteady effects are important in the problem of the motion of a body through a temperature inhomogeneity. In a number of studies the nonstationary effect associated with supersonic motion in nonuniform media has already been investigated theoretically. In [2] the Euler equations were used, while in [3–5] the equations of a viscous shock layer were used; moreover, whereas in [3–4] the solution was limited to the neighborhood of the stagnation line, in [5] it was obtained for the entire forward surface of a sphere. The effect of free-stream nonuniformity on the structure of the viscous shock layer in steady flow past axisymmetric bodies was studied in [6, 7] and for certain particular cases of three-dimensional flow in [8–11].Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 3, pp. 175–180, May–June, 1990.     

Asymptotic solutions of the thin viscous shock layer equations near the symmetry plane of blunt bodies in hypersonic rarefied gas flow

The hypersonic rarefied gas flow over blunt bodies near the symmetry plane is investigated for the regime transitional from continuum to free-molecular. Three rarefied gas flow regimes are considered depending on the relationship between the determining parameters of the problem. For all regimes, at small Reynolds numbers, asymptotic solutions of the thin viscous shock layer equations near the symmetry plane of blunt bodies are obtained in the form of simple analytical expressions for the heat transfer, skin friction and pressure coefficients as functions of the gas-dynamic parameters of the free-stream flow and the geometric parameters and temperature of the body. With decrease in the Reynolds number these coefficients approach their values in free-molecular flow (with the accommodation coefficient equal to unity). From comparison with the data calculated using the direct simulation Monte Carlo method, the accuracy and applicability limits of the analytical solution are estimated.     

Analytic investigation of friction and heat transfer in the neighborhood of a three-dimensional stagnation point at low and moderate Reynolds numbers

A study is made of hypersonic three-dimensional flow of a viscous gas past blunt bodies at low and moderate Reynolds numbers with allowance for the effects of slip and a jump of the temperature across the surface. The equations of the three-dimensional viscous shock layer are solved by an integral method of successive approximation and a finite-difference method in the neighborhood of the stagnation point. In the first approximation of the method an analytic solution to the problem is found. Analysis of the obtained solution leads to the proposal of a simple formula by means of which the calculation of the heat flux to a three-dimensional stagnation point is reduced to the calculation of the heat flux to an axisymmetric stagnation point. A formula for the relative heat flux obtained by generalizing Cheng's well-known formula [1] is given. The accuracy and range of applicability of the obtained expressions are estimated by comparing the analytic and numerical solutions. Three-dimensional problems of the theory of a supersonic viscous shock layer at small Reynolds numbers were considered earlier in [2–5] in a similar formulation but without allowance for the effects of slip.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 2, pp. 143–150, March–April, 1988.     

A Reconciliation of Viscous and Inviscid Approaches to Computing Locomotion of Deforming Bodies

We present a formulation for coupled solutions of fluid and body dynamics in problems of biolocomotion. This formulation unifies the treatment at moderate to high Reynolds number with the corresponding inviscid problem. By a viscous splitting of the Navier–Stokes equations, inertial forces from the fluid are distinguished from the viscous forces, and the former are further decomposed into contributions from body motion in irrotational fluid and ambient fluid vorticity about an equivalent stationary body. In particular, the added mass of the fluid is combined with the intrinsic inertia of the body to allow for simulations of bodies of arbitrary mass, including massless or neutrally buoyant bodies. The resulting dynamical equations can potentially illuminate the role of vorticity in locomotion, and the fundamental differences of locomotion in real and perfect fluids.     

Laminar boundary layer on swept-back wings of infinite span at an angle of attack

A study is made of the flow of a compressible gas in a laminar boundary layer on swept-back wings of infinite span in a supersonic gas flow at different angles of attack. The surface is assumed to be either impermeable or that gas is blown or sucked through it. For this flow and an axisymmetric flow an analytic solution to the problem is obtained in the first approximation of an integral method of successive approximation. For large values of the blowing or suction parameters, asymptotic solutions are found for the boundary layer equations. Some results of numerical solution of the problem obtained by the finite-difference method are given for wings of various shapes in a wide range of angles characterizing the amount by which the wings are swept back and also the blowing or suction parameters. A numerical solution is obtained for the equations of the three-dimensional mixing layer formed in the case of strong blowing of gas from the surface of the body. The analytic and numerical solutions are compared and the regions of applicability of the analytic expressions are estimated. On the basis of the solutions obtained in the present paper and studies of other authors a formula is proposed for the calculation of the heat fluxes to a perfectly catalytic surface of swept-back wings in a supersonic flow of dissociated and ionized air at different angles of attack. Flow over swept-back wings at zero angle of attack has been considered earlier (see, for example, [1–4]) in the theory of a laminar boundary layer. In [5], a study was made of flow over swept-back wings at nonzero angle of attack at small and moderate Reynolds numbers in the framework of the theory of a hypersonic viscous shock layer.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 3, pp. 27–39, May–June, 1980.We thank G. A. Tirskii for a helpful discussion of the results.     

Second approximation in the problem of the strong viscous interaction on slender three-dimensional bodies

We consider the hypersonic flow of a perfect gas past a slender three-dimensional body in a regime of strong viscous interaction. We give equations which make it possible to reduce the problem of determining the aerodynamic characteristics of a body which is not axisymmetric to the problem of computing the flow past an equivalent body of rotation at zero angle of incidence. The second approximation for the heat transfer and drag coefficients is found by the method of external and internal combinations of asymptotic expansions. The region in which this method can be applied and the accuracy of the asymptotic theory are estimated by comparison with exact numerical computations.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti, i Gaza, No. 5, pp. 107–113, September–October, 1970.     

Approximate analytical solutions for heat fluxes in three-dimensional hypersonic flow over blunt bodies

Analytical expressions for the heat flux divided by its value at the stagnation point which depend on the geometric parameters invariant with respect to the choice of the coordinate system, as well as expressions depending on the geometry and the pressure on the surface which have a wider applicability range are obtained in the problem of three-dimensional hypersonic flow over blunt bodies at large and moderate Reynolds numbers. These formulas are derived by solving the thin viscous shock layer equations for a perfect gas using the integral method of successive approximations developed by the author. The accuracy and the range of applicability of the analytical solutions are estimated by comparing them with numerical solutions. On the basis of comparisons with numerical solutions for multicomponent chemically nonequilibrium air at altitudes from 90 to 50 km of the spacecraft reentry trajectory in the Earth’s atmosphere it is shown that the formulas obtained can be used for calculations of the heat flux on an ideal catalytic surface of bodies in hypersonic chemically reacting gas flow.     

Investigation of three-dimensional boundary layers on blunt bodies with permeable surface

Numerical and approximate analytic methods are used to investigate three-dimensional laminar boundary layers on blunt bodies with permeable surface in a supersonic gas stream. In the first approximation of the integral method of successive approximation an analytic solution is obtained to the problem for an impermeable surface, small values of the blowing parameter, and arbitrary suction. For large parameters of the blowing (or suction), whose velocity vector in the general case is directed at a certain angle to the vector of the outer normal to the body, asymptotic expressions are derived for the components of the frictional stress and the heat flux. A numerical solution is obtained to the equations of the three-dimensional boundary layer in a wide range of variation of the blowing (or suction) parameter. The accuracy and region of applicability of the analytic solutions is estimated by comparison with the numerical solutions. On the basis of the solutions obtained in the present paper and the work of other authors an expression is proposed for calculating the heat fluxes to a perfectly catalytic surface of a body in a three-dimensional supersonic flow of dissociated or ionized air. The present paper continues earlier work of the authors [1, 2] on boundary layers in the neighborhood of a symmetry plane and on sweptback wings of infinite span.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 2, pp. 49–58, May–June, 1982.     

Numerical analysis of supersonic viscous gas flow past axisymmetric nonpointed bodies

Supersonic viscous homogeneous gas flow past axisymmetric smooth nonpointed bodies is analyzed numerically for widely varying Mach and Reynolds numbers and flow geometry. The initial equations of a viscous shock layer are solved by the stabilization method. The effect of the determining parameters on the flow character and the heat transfer distribution along the surface is analyzed. The accuracy and domain of applicability of several approximate approaches to the solution of the problem are estimated. Tomsk. Translated from Izvestiya Rossiiskoi Akademii Nauk, Mekhanika Zhidkosti i Gaza, No. 1, pp. 107–117, January–February, 1999. This research was carried out with financial support from the Russian Foundation for Basic Research (project No. 98-01-00298).     

Asymptotic solutions of the two-dimensional equations for a thin viscous shock layer in a rarefied gas

Two-dimensional hypersonic rarefied gas flow around blunt bodies is investigated for the continuum to free-molecular transition regime. In [1], as a result of an asymptotic analysis, three rarefied gas flow regimes, depending on the relationship between the problem parameters, were detected and one of these regimes was investigated. In the present study, asymptotic solutions of the thin viscous shock layer equations at small Reynolds numbers are obtained for the other two flow regimes. Analytical expressions for the heat transfer, friction and pressure coefficients are obtained as functions of the incident flow parameters and the body geometry and temperature. As the Reynolds number tends to zero, the values of these coefficients approach their values in free-molecular flow. The scaling parameters of hypersonic rarefied gas flow around bodies are determined for different regimes. The asymptotic solutions are compared with the results of direct Monte Carlo simulation.     

Comparison of approximate analytical and numerical solutions for heat fluxes in viscous supersonic flow past a body

The axisymmetric supersonic laminar flow of a viscous perfect gas past a blunt body is studied over a wide range of Reynolds and Mach numbers. An approximate analytical solution for the distribution of the heat flux, divided by its value at the stagnation point, over the body surface is derived. The expression for the relative heat flux depends only on the body geometry and the pressure distribution over the body surface. To evaluate the accuracy and the range of validity of the formulas obtained, a comparison with numerical solutions of the complete Navier-Stokes equations was carried out for bodies of various shapes, such as spheres, ellipsoids, and paraboloids.Moscow. Translated from Izvestiya Rossiiskoi Akademii Nauk, Mekhanika Zhidkosti i Gaza, No. 1, pp. 125–132, January–February, 1996.     

Three-dimensional laminar boundary layer on a permeable surface in the neighborhood of a symmetry plane

Analytical and numerical methods are used to investigate a three-dimensional laminar boundary layer near symmetry planes of blunt bodies in supersonic gas flows. In the first approximation of an integral method of successive approximation an analytic solution to the problem is obtained that is valid for an impermeable surface, for small values of the blowing parameter, and arbitrary values of the suction parameter. An asymptotic solution is obtained for large values of the blowing or suction parameters in the case when the velocity vector of the blown gas makes an acute angle with the velocity vector of the external flow on the surface of the body. Some results are given of the numerical solution of the problem for bodies of different shapes and a wide range of angles of attack and blowing and suction parameters. The analytic and numerical solutions are compared and the region of applicability of the analytic expressions is estimated. On the basis of the solutions obtained in the present work and that of other authors, a formula is proposed for calculating the heat fluxes to a perfectly catalytic surface at a symmetry plane of blunt bodies in a supersonic flow of dissociated and ionized air at different angles of attack. Flow near symmetry planes on an impermeable surface or for weak blowing was considered earlier in the framework of the theory of a laminar boundary layer in [1–4]. An asymptotic solution to the equations of a three-dimensional boundary layer in the case of strong normal blowing or suction is given in [5, 6].Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 5, pp. 37–48, September–October, 1980.     

Some properties of multi-fluid stokes flows

The solution of Stokes' equations for a rotating axisymmetric body which possesses reflection symmetry about a planar interface between two infinite immiscible quiescent viscous fluids is shown to be independent of the viscosities of the fluids and identical with the solution when the fluids have the same viscosity. The result is generalized to a rotating axisymmetric system of bodies which possesses reflection symmetry about each interface of a plane stratified system of fluids. An analogous result for two-fluid systems with a nonplanar static interface is also derived. The effect on torque reduction produced by the presence of a second fluid layer adjacent to a rotating axisymmetric body is considered and explicit calculations are given for the case of a sphere. A proof of uniqueness for unbounded multi-fluid Stokes' flow is given and the asymptotic far field structure of the velocity field is determined for axisymmetric flow caused by the rotation of axisymmetric bodies.     

Optimal shapes of bodies with attached shock waves

We consider the problem of finding the shape of two-dimensional and axisymmetric bodies having minimal wave drag in a supersonic perfect gas flow. The solution is sought among bodies having attached shock waves. The limitations on the body contour are arbitrary: these constraints may be body dimensions, volume, area, etc. Such problems with arbitrary isoperimetric conditions may be solved by the method suggested in [1, 2]. This method involves the use of the exact equations of gasdynamics which describe the flow as additional constraints. This method was developed further in [3–6] in the solution of several problems.The author wishes to thank V. M. Borisov, A. N. Kraiko and Yu. D. Shmyglevskii for their interest in this study.     

Brinkman Flow Past a Stretching Sheet

The problem of steady viscous flow of an incompressible fluid over a flat deformable sheet in a porous medium, when the sheet is stretched in its own plane is revisited. An exact solution is recovered for the two-dimensional case and a totally analytic approximate solution is developed for the axisymmetric case. Stretching rate of two-dimensional case is assumed as double the stretching rate of axisymmetric case. The analytical expressions of residual errors, horizontal, vertical velocity distributions, stream lines, vorticity lines, pressure distributions have been obtained and plotted. The values of skin friction, entrainment velocity, boundary layer thickness, momentum thickness and energy thickness have been tabulated. For the first time, two-dimensional and axisymmetric cases are compared by means of a unified scale.