π–π Stacking‐Interlinked Molecular Squares with Hepta‐Coordinated Cadmium(II) Corners, [Cd(DMAP)3(NO2)2]·0.5H2O

The single crystal X‐ray analysis data of the new hepta‐coordinate cadmium(II) complex of N,N‐dimethyl‐N‐(4‐pyridyl)amine (DMPA), [Cd(DMPA)₃(NO₂)₂]·0.5H₂O, shows that the coordination environment around the Cd^II is pentagonal bipyramidal. Furthermore, self‐assembly of this complex as molecular squares that interlink via π–π stacking interactions is observed. This network contains voids that are filled by water molecules.     

Interplay between H‐Bonding and Preorganization in the Evolution of Self‐Assembled Systems

Cooperative π–π interactions and H‐bonding are frequently exploited in supramolecular polymerization; however, close scrutiny of their mutual interplay has been largely unexplored. Herein, we compare the self‐assembly behavior of a series of C₂‐ and C₃‐symmetrical oligophenyleneethynylenes differing in their amide topology (N‐ or C‐centered). This subtle structural modification brings about drastic changes in their photophysical and supramolecular properties, highlighting the reciprocal impact of H‐bonding vs. preorganization on the evolution and final outcome of supramolecular systems.     

Two‐Component Self‐Assembly: Hierarchical Formation of pH‐Switchable Supramolecular Networks by π–π Induced Aggregation of Ion Pairs

Two‐component self‐assembly is a promising approach to construct functional nanomaterials. Interaction of a flexible guanidiniocarbonyl pyrrole tetra‐cation ( 1 ) with naphthalene diimide dicarboxylic acid (NDIDC) in aqueous DMSO leads to the formation of supramolecular networks. First, the carboxylate groups of NDIDC bind to the guanidiniocarbonyl pyrrole cations of 1 in a 1:2 stoichiometry. Further π–π induced aggregation then leads to 3D networks, as established by dynamic light scattering studies (DLS), NMR, fluorescence titration, viscosity measurements, AFM, and TEM microscopy. Due to ion pairing, the resulting aggregates can be switched between the monomers and the aggregates reversibly using external stimuli like protonation or deprotonation. At high concentration, a stable colloidal solution is formed, which shows an extensive Tyndall effect. Increasing the concentrations even further leads to formation of a supramolecular gel.     

Oligo(p‐phenyleneethynylene)‐based coil–rod–coil triblock copolymer: Synthesis and controlled self‐organization in solution

The self‐assembling ability of block copolymers offers an attractive strategy for the organization of π‐conjugated polymers. This article reports the synthesis of a coil–rod–coil triblock copolymer consisting of oligo(p‐phenyleneethynylene) as the rodlike segment and polystyrene as the coil‐like segment. The chemical structure of the afforded triblock copolymer has been fully characterized by various spectroscopic techniques such as NMR, Raman, gel permeation chromatography, differential scanning calorimetry, ultraviolet–visible, and fluorescence spectroscopy. The small‐angle neutron scattering and photophysical measurements indicate that this triblock copolymer exhibits unique solvatochromatic behaviors through the interplay of aggregation‐induced π–π stacking and planarization of the conjugated backbone. Supramolecular gel nanostructures have been produced via the controlled assembly of the polymer into H‐aggregates. It has been demonstrated that the use of the solvent composition to influence chain conformations and thus to manipulate the packing of the conjugated polymer blocks is important for achieving control in the assembly of conducting polymers and associated optical characteristics. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 6007–6019, 2005     

Self‐Healing Polymers via Supramolecular Forces

As polymers and polymeric materials are “the” smart invention and technological driving force of the 20th century, the quest for self‐healing or self‐repairing polymers is strong. The concept of supramolecular self‐healing materials relies on the use of noncovalent, transient bonds to generate networks, which are able to heal the damaged site, putting aspects of reversibility and dynamics of a network as crucial factors for the understanding and design of such self‐healing materials. This Review describes recent examples and concepts of supramolecular polymers based on hydrogen bonding, π–π interactions, ionomers, and coordinative bonds, thus convincingly discussing the advantages and versatility of these supramolecular forces for the design and realization of self‐healing polymers.     

Nanomechanics of Poly(catecholamine) Coatings in Aqueous Solutions

Mussel‐inspired self‐polymerized catecholamine coatings have been widely utilized as a versatile coating strategy that can be applied to a variety of substrates. For the first time, nanomechanical measurements and an evaluation of the contribution of primary amine groups to poly(catecholamine) coatings have been conducted using a surface‐forces apparatus. The adhesive strength between the poly(catecholamine) layers is 30‐times higher than that of a poly(catechol) coating. The origin of the strong attraction between the poly(catecholamine) layers is probably due to surface salt displacement by the primary amine, π–π stacking (the quadrupole–quadrupole interaction of indolic crosslinks), and cation–π interactions (the monopole–quadrupole interaction between positively charged amine groups and the indolic crosslinks). The contribution of the primary amine group to the catecholamine coating is vital for the design and development of mussel‐inspired catechol‐based coating materials.     

Exciton‐Vibrational Couplings in Homo‐ and Heterodimer Stacks of Perylene Bisimide Dyes within Cyclophanes: Studies on Absorption Properties and Theoretical Analysis

The optical properties of a series of three cyclophanes comprising either identical or different perylene bisimide (PBI) chromophores were studied by UV/Vis absorption spectroscopy and their distinctive spectral features were analyzed. All the investigated cyclophanes show significantly different absorption features with respect to the corresponding constituent PBI monomers indicating strong coupling interactions between the PBI units within the cyclophanes. DFT calculations suggest a π‐stacked arrangement of the PBI units at close van der Waals distance in the cyclophanes with rotational displacement. Simulations of the absorption spectra based on time‐dependent quantum mechanics properly reproduced the experimental spectra, revealing exciton‐vibrational coupling between the chromophores both in homo‐ and heterodimer stacks. The PBI cyclophane comprising two different PBI chromophores represents the first example of a PBI heterodimer stack for which the exciton coupling has been investigated. The quantum dynamics analysis reveals that exciton coupling in heteroaggregates is indeed of similar strength as for homoaggregates.     

A Columnar Liquid‐Crystal Phase Formed by Hydrogen‐Bonded Perylene Bisimide J‐Aggregates

A new perylene bisimide (PBI) dye self‐assembles through hydrogen bonds and π–π interactions into J‐aggregates that in turn self‐organize into liquid‐crystalline (LC) columnar hexagonal domains. The PBI cores are organized with the transition dipole moments parallel to the columnar axis, which is an unprecedented structural organization in π‐conjugated columnar liquid crystals. Middle and wide‐angle X‐ray analyses reveal a helical structure consisting of three self‐assembled hydrogen‐bonded PBI strands that constitute a single column of the columnar hexagonal phase. This remarkable assembly mode for columnar liquid crystals may afford new anisotropic LC materials for applications in photonics.     

Fourfold alkyl wrapping of a copper(II) porphyrin thwarts macrocycle π–π stacking in a compact supramolecular package

Porphyrins are valuable constituents in optoelectronic, catalytic, and other applications, yet control of intermolecular π–π stacking is invariably essential to attain the desired properties. Superstructures built onto the porphyrin, often via meso‐aryl groups, can afford facial encumbrance that suppresses π–π stacking, although some molecular designs have provided insufficient facial coverage and many have entailed cumbersome syntheses. In this study, a copper(II) porphyrin bearing four meso substituents, namely, {10,20‐bis[2,6‐bis(octyloxy)phenyl]‐5,15‐dibromoporphinato}copper(II), [Cu(C₆₄H₈₂Br₂N₄O₄)], was prepared by metalation of the corresponding free‐base porphyrin and was characterized by single‐crystal X‐ray diffraction. The crystal structure reveals a dihedral angle of 111.1 (2)° for the plane of the meso‐aryl group relative to the plane of the porphyrin, with both aryl groups tilted in the same direction. Each of the four octyloxy groups exhibits a gauche conformation for the –OCH₂CH₂– unit but is extended with four or five anti (–CH₂CH₂–/H) conformations thereafter, causing each octyl group to span the dimension of the macrocycle. In a global frame of reference where the two Br atoms define the north/south poles and the two aryl groups are at antipodes on the equator, two octyl groups of one aryl unit project over the northern hemisphere (covering pyrroles A and B), whereas those of the other aryl unit project over the southern hemisphere (covering pyrroles C and D). Together, the four octyl groups ensheath the two faces of the porphyrin in a self‐wrapped assembly. The closest approach of the Cu atom to an octyl methylene C atom (position 6) is 3.5817 (18) Å, the mean separations of neighboring porphyrin planes are 8.059 (4) and 4.693 (8) Å along the a and c axes, respectively, and the center‐to‐center distances between the Cu atoms of neighboring porphyrins are 10.2725 (4), 12.2540 (6), and 12.7472 (6) Å along the a, b, and c axes, respectively. The Hirshfeld surface analysis and two‐dimensional (2D) fingerprint plots provide information concerning contact interactions in the supramolecular assembly of the solid crystal.     

Covalent Organic Framework for Improving Near‐Infrared Light Induced Fluorescence Imaging through Two‐Photon Induction

Fluorescent materials exhibiting two‐photon induction (TPI) are used for nonlinear optics, bioimaging, and phototherapy. Polymerizations of molecular chromophores to form π‐conjugated structures were hindered by the lack of long‐range ordering in the structure and strong π–π stacking between the chromophores. Reported here is the rational design of a benzothiadiazole‐based covalent organic framework (COF) for promoting TPI and obtaining efficient two‐photon induced fluorescence emissions. Characterization and spectroscopic data revealed that the enhancement in TPI performance is attributed to the donor‐π‐acceptor‐π‐donor configuration and regular intervals of the chromophores, the large π‐conjugation domain, and the long‐range order of COF crystals. The crystalline structure of TPI‐COF attenuates the π–π stacking interactions between the layers, and overcomes aggregation‐caused emission quenching of the chromophores for improving near‐infrared two‐photon induced fluorescence imaging.     

Tuning the π‐π stacking distance and J‐aggregation of DPP‐based conjugated polymer via introducing insulating polymer

The close π–π stacking and the high J‐aggregation during the formation of fibrillar morphology in films of the poly[[2,5‐bis(2‐octyldodecyl)?2,3,5,6‐tetrahydro‐3,6‐dioxopyrrolo[3,4‐c]pyrrole‐1,4‐diyl]‐alt–[[2,2′‐(2,5‐thiophene)bis‐thieno[3,2‐b]thiophen]‐5,5′‐diyl]] (PDPPTT‐T) are demonstrated via blending with polystyrene (PS). The hydrodynamic radius (R_h) of PDPPTT‐T is decreased from 16.7 nm in the neat solution to 12.7 nm in the blend solution at the ratio of 1/20(PDPPTT‐T/PS). This phenomenon suggests that blending PS is beneficial for the disentanglement of PDPPTT‐T. The disentanglement of PDPPTT‐T facilitates the formation of fibrillar morphology. The growth of the fibrils occurs along the molecular backbones and the width of the fibrils is parallel to the π–π stacking direction. The disentanglement of PDPPTT‐T helps the molecules adjust conformation to improve J‐aggregation and decrease the π–π stacking distance. The maximum absorption is red‐shifted from 825 nm to 849 nm and the relative intensity of J‐aggregation (the 0‐0/0‐1 ratio) is increased from 1.19 to 1.60. The π–π stacking distance decreases from 3.57 to 3.52 Å. The charge‐carrier mobility will be improved in the fibrillar morphology with close π–π stacking and high J‐aggregation. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 838–847     

Energetic N‐Nitramino/N‐Oxyl‐Functionalized Pyrazoles with Versatile π–π Stacking: Structure–Property Relationships of High‐Performance Energetic Materials

N‐Nitramino/N‐oxyl functionalization strategies were employed to investigate structure–property relationships of energetic materials. Based on single‐crystal diffraction data, π–π stacking of pyrazole backbones can be tailored effectively by energetic functionalities, thereby resulting in diversified energetic compounds. Among them, hydroxylammonium 4‐amino‐3,5‐dinitro‐1H‐pyrazol‐1‐olate and dipotassium N,N′‐(3,5‐dinitro‐1H‐pyrazol‐1,4‐diyl)dinitramidate, with unique face‐to‐face π–π stacking, can be potentially used as a high‐performance explosive and an energetic oxidizer, respectively.     

A Rotaxane‐like Cage‐in‐Ring Structural Motif for a Metallosupramolecular Pd6L12 Aggregate

A BODIPY‐based bis(3‐pyridyl) ligand undergoes self‐assembly upon coordination to tetravalent palladium(II) cations to form a Pd₆L₁₂ metallosupramolecular assembly with an unprecedented structural motif that resembles a rotaxane‐like cage‐in‐ring arrangement. In this assembly the ligand adopts two different conformations—a C‐shaped one to form a Pd₂L₄ cage which is located in the center of a Pd₄L₈ ring consisting of ligands in a W‐shaped conformation. This assembly is not mechanically interlocked in the sense of catenation but it is stabilized only by attractive π‐stacking between the peripheral BODIPY chromophores and the ligands’ skeleton as well as attractive van der Waals interactions between the long alkoxy chains. As a result, the co‐arrangement of the two components leads to a very efficient space filling. The overall structure can be described as a rotaxane‐like assembly with a metallosupramolecular cage forming the axle in a metallosupramolecular ring. This unique structural motif could be characterized via ESI mass spectrometry, NMR spectroscopy, and X‐ray crystallography.     

Molecular assemblies of perylene bisimide dyes in water

Perylene bisimides are among the most valuable functional dyes and have numerous potential applications. As a result of their chemical robustness, photostability, and outstanding optical and electronic properties, these dyes have been applied as pigments, fluorescence sensors, and n‐semiconductors in organic electronics and photovoltaics. Moreover, the extended quadrupolar π system of this class of dyes has facilitated the construction of numerous supramolecular architectures with fascinating photophysical properties. However, the supramolecular approach to the formation of perylene bisimide aggregates has been restricted mostly to organic media. Pleasingly, considerable progress has been made in the last few years in developing water‐soluble perylene bisimides and their application in aqueous media. This Review provides an up‐to‐date overview on the self‐assembly of perylene bisimides through π–π interactions in aqueous media. Synthetic strategies for the preparation of water‐soluble perylene bisimides and the influence of water on the π–π stacking of perylene bisimides as well as the resulting applications are discussed.     

Multichannel Conductance of Folded Single‐Molecule Wires Aided by Through‐Space Conjugation

Deciphering charge transport through multichannel pathways in single‐molecule junctions is of high importance to construct nanoscale electronic devices and deepen insight into biological redox processes. Herein, we report two tailor‐made folded single‐molecule wires featuring intramolecular π–π stacking interactions. The scanning tunneling microscope (STM) based break‐junction technique and theoretical calculations show that through‐bond and through‐space conjugations are integrated into one single‐molecule wire, allowing for two simultaneous conducting channels in a single‐molecule junction. These folded molecules with stable π–π stacking interaction offer conceptual advances in single‐molecule multichannel conductance, and are perfect models for conductance studies in biological systems, organic thin films, and π‐stacked columnar aggregates.     

A Double Cation–π‐Driven Strategy Enabling Two‐Dimensional Supramolecular Polymers as Efficient Catalyst Carriers

The cation–π interaction is a strong non‐covalent interaction that can be used to prepare high‐strength, stable supramolecular materials. However, because the molecular plane of a cation‐containing group and that of aromatic structure are usually perpendicular when forming a cation–π complex, it is difficult to exploit the cation–π interaction to prepare a 2D self‐assembly in which the molecular plane of all the building blocks are parallel. Herein, a double cation–π‐driven strategy is proposed to overcome this difficulty and have prepared 2D self‐assemblies with long‐range ordered molecular hollow hexagons. The double cation–π interaction makes the 2D self‐assemblies stable. The 2D self‐assemblies are to be an effective carrier that can eliminate metal‐nanoparticle aggregation. Such 2D assembly/palladium nanoparticle hybrids are shown to exhibit recyclability and superior catalytic activity for a model reaction.     

Shifting from Hydrogen Bond Network to π–π Stacking: A Key Mechanism for Reversible Thermochromic Sulfonated Poly(Ether Ether Ketone)

Sulfonated poly(ether ether ketone) (SPEEK) thin film performs reversible thermochromic property by developing the color to be yellowish at the temperature above 190 °C. The detailed analyses based on temperature‐dependent techniques suggest the thermal treatment inducing the shifting of the hydrogen bond network between the sulfonated group and the hydrated water molecules to the π–π stacking among aromatic rings in SPEEK chains. Although it is general that the polymer chain packing is unfavorable at high temperature, the present work shows a good example that when the polymer chains can form specific molecular interaction, such as π–π stacking, even in harsh thermal treatment, a rearrangement will effectively occur, which leads to an external stimuli‐responsive property.

     

β‐Iminoenamine‐BF2 Complexes: Aggregation‐Induced Emission and Pronounced Effects of Aliphatic Rings on Radiationless Deactivation

The synthesis, photophysical, and electrochemical attributes of a novel class of boron difluorides containing an aromatic‐fused alicyclic/hetero‐alicyclic ring built on a β‐iminoenamine chromophoric backbone are reported. The compounds displayed large Stokes shifts (86–121 nm), and were emissive in the solid state. The quantum yields obtained in solution at room temperature were unusually lower by an order of magnitude compared to those in the solid state. Some of the tested compounds displayed aggregation‐induced emission (AIE). Single crystal XRD analyses revealed a lack of interplanar π–π interactions, which are presumed to be absent owing to non‐planarity of the alicyclic component in the molecule. For most of the studied compounds, time‐dependent DFT (TD‐DFT) calculations invariably reveal intramolecular charge transfer (π–π*) characteristics with the frontier orbitals concentrated on the boron–nitrogen heterocycle. The participation of boron and fluorine atoms was found to be negligible.     

C 5 and C7 intramolecular hydrogen bonds stabilize the structure of N‐pyrazinoyl‐gabapentin (Pyr‐Gpn‐OH)

2‐{1‐[(Pyrazin‐2‐ylformamido)methyl]cyclohexyl}acetic acid (Pyr‐Gpn‐OH), C₁₄H₁₉N₃O₃, is an N‐protected derivative of gabapentin (Gpn). The compound crystallizes in the triclinic space group P and the molecular conformation is stabilized by intramolecular five‐ (C₅) and seven‐membered (C₇) hydrogen‐bonded rings. The packing of the molecules reveals intermolecular O—H...O and C—H...N hydrogen bonds, together with π–π interactions.     

[2,5‐Bis(2,2′‐bipyridyl‐6‐yl)‐3,4‐diazahexa‐2,4‐diene]dichloridomanganese(II): from a mononuclear compound to a three‐dimensional supramolecular framework through C—H...Cl hydrogen bonds and π–π stacking interactions

The title compound, [MnCl₂(C₂₄H₂₀N₆)], has been synthesized and characterized based on the multifunctional ligand 2,5‐bis(2,2′‐bipyridyl‐6‐yl)‐3,4‐diazahexa‐2,4‐diene (L). The Mn^II centre is five‐coordinate with an approximately square‐pyramidal geometry. The L ligand acts as a tridendate chelating ligand. The mononuclear molecules are bridged into a one‐dimensional chain by two C—H...Cl hydrogen bonds. These chains are assembled into a two‐dimensional layer through π–π stacking interactions between adjacent uncoordinated bipyridyl groups. Furthermore, a three‐dimensional supramolecular framework is attained through π–π stacking interactions between adjacent coordinated bipyridyl groups.