Light‐Induced Reversible Reconfiguration of DNA‐Based Constitutional Dynamic Networks: Application to Switchable Catalysis

The light‐induced reversible and cyclic reconfiguration of constitutional dynamic networks, consisting of supramolecular nucleic acid structures as constituents and a photoisomerizable trans/cis‐azobenzene‐functionalized nucleic acid as the trigger is demonstrated. In addition, the cyclic photochemical reconfiguration of the constitutional dynamic networks guides the switchable on/off operation of an emerging hemin/G‐quadruplex DNAzyme.     

Light‐Driven Shape‐Memory Porous Films with Precisely Controlled Dimensions

Shape‐memory polymers (SMPs) are an intriguing class of smart materials possessing reversible shape change and recovery capabilities. Effective routes to shape‐memory porous films (SMPFs) are few and limited in scope owing to the difficulty in manipulating the shape change of pores by conventional methods. Herein we report an unconventional strategy for crafting light‐driven SMPFs by judiciously constructing highly ordered porous films via a facile “breath figure” approach, followed by sequential vapor crosslinking and nondestructive directional light manipulation. Micropores can thus be transformed into other shapes including rectangle, rhombus and size‐reduced micropores at room temperature. The transformed micropores can be reverted to their original shapes by either thermal annealing or UV irradiation. As such, this strategy expands the rich diversity of SMPs accessible.     

A Light‐Controlled Release System Based on Molecular Recognition of Cyclodextrins

This Communication describes a new light‐controlled release system based on molecular recognition of cyclodextrins. Azobenzene (Azo) residue is employed as a photoresponsive guest residue because it can switch the partner from α‐cyclodextrin (αCD) to β‐cyclodextrin (βCD) by irradiation with UV light. Poly(sodium acrylate)s possessing αCD, βCD, and Azo residues (pAαCD, pAβCD, and pAAzo, respectively) are mixed in aqueous solutions to form aggregates through the formation of inclusion complexes of Azo with αCD and/or βCD. A chemical cargo, 1‐pyrenemethylammonium chloride (PyMA), is contained in the aggregates, and its release behavior is investigated by dialysis experiments under UV irradiation. These data indicate that the amount of PyMA released for the pAαCD/pAβCD/pAAzo ternary mixture is approximately three times as high as those for the pAαCD/pAAzo and pAβCD/pAAzo binary mixtures because of the light‐controlled rearrangement of inclusion complexes.

     

Hierarchical Self‐Assembly of a Biomimetic Light‐Harvesting Antenna Based on DNA G‐Quadruplexes

A new modular approach to an artificial light‐harvesting antenna system is presented. The approach involves the hierarchical self‐assembly of porphyrin acceptor molecules to G‐quadruplexes tethered to coumarin donor moieties.     

Transient DNA‐Based Nanostructures Controlled by Redox Inputs

Synthetic DNA has emerged as a powerful self‐assembled material for the engineering of nanoscale supramolecular devices and materials. Recently dissipative self‐assembly of DNA‐based supramolecular structures has emerged as a novel approach providing access to a new class of kinetically controlled DNA materials with unprecedented life‐like properties. So far, dissipative control has been achieved using DNA‐recognizing enzymes as energy dissipating units. Although highly efficient, enzymes pose limits in terms of long‐term stability and inhibition of enzyme activity by waste products. Herein, we provide the first example of kinetically controlled DNA nanostructures in which energy dissipation is achieved through a non‐enzymatic chemical reaction. More specifically, inspired by redox signalling, we employ redox cycles of disulfide‐bond formation/breakage to kinetically control the assembly and disassembly of tubular DNA nanostructures in a highly controllable and reversible fashion.     

Light‐Controlled Regioselective Synthesis of Fullerene Bis‐Adducts

Multi‐functionalization and isomer‐purity of fullerenes are crucial tasks for the development of their chemistry in various fields. In both current main approaches—tether‐directed covalent functionalization and supramolecular masks—the control of regioselectivity requires multi‐step synthetic procedures to prepare the desired tether or mask. Herein, we describe light‐responsive tethers, containing an azobenzene photoswitch and two malonate groups, in the double cyclopropanation of [60]fullerene. The formation of the bis‐adducts and their spectroscopic and photochemical properties, as well as the effect of azobenzene photoswitching on the regiochemistry of the bis‐addition, have been studied. The behavior of the tethers depends on the geometry of the connection between the photoactive core and the malonate moieties. One tether lead to a strikingly different adduct distribution for the E and Z isomers, indicating that the covalent bis‐functionalization of C₆₀ can be controlled by light.     

DNA‐Based Oligochromophores as Light‐Harvesting Systems

The chromophores ethynyl pyrene as blue, ethynyl perylene as green and ethynyl Nile red as red emitter were conjugated to the 5‐position of 2′‐deoxyuridine via an acetylene bridge. Using phosphoramidite chemistry on solid phase labelled DNA duplexes were prepared that bear single chromophore modifications, and binary and ternary combinations of these chromophore modifications. The steady‐state and time‐resolved fluorescence spectra of all three chromophores were studied in these modified DNA duplexes. An energy‐transfer cascade occurs from ethynyl pyrene over ethynyl perylene to ethynyl Nile red and subsequently an electron‐transfer cascade in the opposite direction (from ethynyl Nile red to ethynyl perylene or ethynyl pyrene, but not from ethynyl perylene to ethynyl pyrene). The electron‐transfer processes finally provide charge separation. The efficiencies by these energy and electron‐transfer processes can be tuned by the distances between the chromophores and the sequences. Most importantly, excitation at any wavelength between 350 and 700 nm finally leads to charge separated states which make these DNA samples promising candidates for light‐harvesting systems.     

DNA‐Organized Light‐Harvesting Antennae: Energy Transfer in Polyaromatic Stacks Proceeds through Interposed Nucleobase Pairs

DNA‐based light‐harvesting antennae with varying arrangements of light‐absorbing phenanthrene donor units and a pyrene acceptor dye were synthesized and tested for their light‐harvesting properties. Excitation of phenanthrene is followed by rapid transfer of the excitation energy to the pyrene chromophore. A block of six light‐absorbing phenanthrenes was separated from the site of the acceptor in a stepwise manner by an increasing number of intervening AT base pairs. Energy transfer occurs through interposed AT base pairs and is still detected when the phenanthrene antenna is separated by 5 AT base pairs.     

DNA‐Based Nanopore Sensing

Nanopore sensing is an attractive, label‐free approach that can measure single molecules. Although initially proposed for rapid and low‐cost DNA sequencing, nanopore sensors have been successfully employed in the detection of a wide variety of substrates. Early successes were mostly achieved based on two main strategies by 1) creating sensing elements inside the nanopore through protein mutation and chemical modification or 2) using molecular adapters to enhance analyte recognition. Over the past five years, DNA molecules started to be used as probes for sensing rather than substrates for sequencing. In this Minireview, we highlight the recent research efforts of nanopore sensing based on DNA‐mediated characteristic current events. As nanopore sensing is becoming increasingly important in biochemical and biophysical studies, DNA‐based sensing may find wider applications in investigating DNA‐involving biological processes.     

Biomimetic stimuli‐responsive nanochannels and their applications

Biomimetic smart nanochannels have been studied extensively to achieve the precise ionic transport compared to biological ion channels. Similar to ion channels in living organisms, biomimetic smart nanochannels can respond to various stimuli, which allows for promising applications in many fields. In this review, we mainly summarize the recent advances in the design of biomimetic stimuli‐responsive nanochannels and their potential applications including biosensors and drug delivery. Finally, an outlook on the challenges and opportunities for biomimetic stimuli‐responsive nanochannels is provided.     

Thermally Cross‐Linkable Hole Transport Polymers for Solution‐Based Organic Light‐Emitting Diodes

Two thermally cross‐linkable hole transport polymers that contain phenoxazine and triphenylamine moieties, X‐P1 and X‐P2, are developed for use in solution‐processed multi‐stack organic light‐emitting diodes (OLEDs). Both X‐P1 and X‐P2 exhibit satisfactory cross‐linking and optoelectronic properties. The highest occupied molecular orbital (HOMO) levels of X‐P1 and X‐P2 are −5.24 and −5.16 eV, respectively. Solution‐processed super yellow polymer devices (ITO/X‐P1 or X‐P2/PDY‐132/LiF/Al) with X‐P1 or X‐P2 hole transport layers of various thicknesses are fabricated with the aim of optimizing the device characteristics. The fabricated multi‐stack yellow devices containing the newly synthesized hole transport polymers exhibit satisfactory currents and power efficiencies. The optimized X‐P2 device exhibits a device efficiency that is dramatically improved by more than 66% over that of a reference device without an HTL.

     

DNA‐Nanotechnologie

For the past two decades the extraordinary molecular recognition properties of DNA molecules have been used for the creation of artificial molecular structures. Following the initial production of simple molecular objects and lattices, with the recent invention of the DNA origami technique the complexity of these structures has considerably increased. Now the construction of almost arbitrary molecular nanostructures from DNA in two and even three dimensions is feasible – and first concrete applications in biomedicine and nanotechnology are in reach. In addition to static molecular structures, also dynamical systems such as molecular machines, molecular motors, and molecular computers can be realized. The combination of these functions within integrated systems currently leads to the development of first molecular “robots” and assembly lines for nanotechnology.