1,3‐Dipolar cycloadditions of Stone–Wales defective single‐walled carbon nanotubes: A theoretical study

The presence of Stone‐Wales defects in single‐walled carbon nanotubes (SWNTs) not only leads to new interesting properties, but also provides opportunities for tailoring physical and chemical properties, and expands their novel potential applications. With a two‐layered ONIOM method, 1,3‐dipolar cycloadditions (1,3‐DCs) of a series of 1,3‐dipoles (azomethine ylide, nitrone, nitrile imine, nitrile ylide, nitrile oxide, and methyl azide) with Stone‐Wales defective SWNTs have been investigated theoretically for the first time. The calculated results demonstrate that the bond c , rather than the previously focused central bond a , exhibits the highest chemical reactivity among the defective sites. More interestingly, bond c is even more reactive thermodynamically and kinetically than the perfect C? C bond in SWNTs, suggesting the feasibility of utilizing 1,3‐DC reactions to separate and purify perfect and defective SWNTs. The reactivity order for nonequivalent bonds in defective sites is different from that of [1+2] cycloaddition, indicating that the reactivity order for nonequivalent bonds depends on the kind of the chemical reactions. Except azomethine ylide, nitrile ylide and nitrile imine are found to be good candidates for 1,3‐DCs upon Stone‐Wales defective SWNTs. The SW‐ A and SW‐ B defective SWNTs show different chemical reactivity toward nitrile ylide, making it possible to purify and separate the SW‐ A and SW‐ B defective SWNTs. The SWNT diameters are found to moderately influence the 1,3‐DC reactivity of both perfect and Stone‐Wales defective SWNTs, implying that Stone‐Wales defective SWNTs with different diameter would be separated experimentally through 1,3‐DC chemistry. The above 1,3‐DC reactivity can be well understood in terms of the distortion/interaction theory, which means that instead of frontier molecular orbitals interaction energy, the distortion energy controls the chemical reactivity. © 2013 Wiley Periodicals, Inc.     

Cysteine‐Selective Phosphonamidate Electrophiles for Modular Protein Bioconjugations

We describe a new technique in protein synthesis that extends the existing repertoire of methods for protein modification: A chemoselective reaction that induces reactivity for a subsequent bioconjugation. An azide‐modified building block reacts first with an ethynylphosphonite through a Staudinger‐phosphonite reaction (SPhR) to give an ethynylphosphonamidate. The resulting electron‐deficient triple bond subsequently undergoes a cysteine‐selective reaction with proteins or antibodies. We demonstrate that ethynylphosphonamidates display excellent cysteine‐selective reactivity combined with superior stability of the thiol adducts, when compared to classical maleimide linkages. This turns our technique into a versatile and powerful tool for the facile construction of stable functional protein conjugates.     

Water Triggers Hydrogen‐Bond‐Network Reshaping in the Glycoaldehyde Dimer

Carbohydrates are ubiquitous biomolecules in nature. The vast majority of their biomolecular activity takes place in aqueous environments. Molecular reactivity and functionality are, therefore, often strongly influenced by not only interactions with equivalent counterparts, but also with the surrounding water molecules. Glycoaldehyde (Gly) represents a prototypical system to identify the relevant interactions and the balance that governs them. Here we present a broadband rotational‐spectroscopy study on the stepwise hydration of the Gly dimer with up to three water molecules. We reveal the preferred hydrogen‐bond networks formed when water molecules sequentially bond to the sugar dimer. We observe that the dimer structure and the hydrogen‐bond networks at play remarkably change upon the addition of just a single water molecule to the dimer. Further addition of water molecules does not significantly alter the observed hydrogen‐bond topologies.     

Infrared spectrum and structure of thorimine (HN=ThH2)

Laser-ablated thorium atoms react with ammonia to form thorimine (NH=ThH(2)), the first actinide imine to be reported. This work underscores the high reactivity of thorium atoms, particularly for N-H bond activation, reveals a new type of multiple bond to actinide atoms, and shows that this bond is strong for thorium as a result of an important contribution from the f orbitals.     

A Palladium‐Catalyzed Carbonylation Approach to Eight‐Membered Lactam Derivatives with Antitumor Activity

The reactivity of 2‐(2‐alkynylphenoxy)anilines under PdI₂/KI‐catalyzed oxidative carbonylation conditions has been studied. Although a different reaction pathway could have been operating, N‐palladation followed by CO insertion was the favored pathway with all substrates tested, including those containing an internal or terminal triple bond. This led to the formation of a carbamoylpalladium species, the fate of which, as predicted by theoretical calculations, strongly depended on the nature of the substituent on the triple bond. In particular, 8‐endo‐dig cyclization preferentially occurred when the triple bond was terminal, leading to the formation of carbonylated ζ‐lactam derivatives, the structures of which have been confirmed by XRD analysis. These novel medium‐sized heterocyclic compounds showed antitumor activity against both estrogen receptor‐positive (MCF‐7) and triple negative (MDA‐MB‐231) breast cancer cell lines. In particular, ζ‐lactam 3 j′ may represent a novel and promising antitumor agent because biological tests clearly demonstrate that this compound significantly reduces cell viability and motility in both MCF‐7 and MDA‐MB‐231 breast cancer cell lines, without affecting normal breast epithelial cell viability.     

Reversible Photothermal Isomerization of Carborane‐Fused Azaborole to Borirane: Synthesis and Reactivity of Carbene‐Stabilized Carborane‐Fused Borirane

A fully reversible photothermal isomerization between carborane‐fused trigonal‐planar azaborole (dark‐purple) and tetrahedral borirane (pale‐yellow) has been observed, leading to the isolation and structural characterization of the first example of carborane‐fused borirane. DFT calculations indicate that the azaborole is thermodynamically more stable than the borirane by 11.2 kcal mol⁻¹, and the energy barrier for the thermal conversion from azaborole to borirane is 35.5 kcal mol⁻¹. The reactivity studies show that the B−C(cage) bond in borirane can be broken in the reaction with CuCl, HCl, or elemental sulfur.     

C−I‐Selective Cross‐Coupling Enabled by a Cationic Palladium Trimer

While there is a growing interest in harnessing synergistic effects of more than one metal in catalysis, relatively little is known beyond bimetallic systems. This report describes the straightforward access to an air‐stable Pd trimer and presents unambiguous reactivity data of its privileged capability to differentiate C?I over C?Br bonds in C?C bond formations (arylation and alkylation) of polyhalogenated arenes, which typical Pd⁰ and Pd^I‐Pd^I catalysts fail to deliver. Experimental and computational reactivity data, including the first location of a transition state for bond activation by the trimer, are presented, supporting direct trimer reactivity to be feasible.     

Hydrogen‐Bond‐Enabled Dynamic Kinetic Resolution of Axially Chiral Amides Mediated by a Chiral Counterion

Non‐biaryl atropisomers are valuable in medicine, materials, and catalysis, but their enantioselective synthesis remains a challenge. Herein, a counterion‐mediated O‐alkylation method for the generation of atropisomeric amides with an er up to 99:1 is outlined. This dynamic kinetic resolution is enabled by the observation that the rate of racemization of atropisomeric naphthamides is significantly increased by the presence of an intramolecular O?H???NCO hydrogen bond. Upon O‐alkylation of the H‐bond donor, the barrier to rotation is significantly increased. Quantum calculations demonstrate that the intramolecular H‐bond reduces the rotational barrier about the aryl–amide bond, stabilizing the planar transition state for racemization by approximately 40 kJ mol^?1, thereby facilitating the observed dynamic kinetic resolution.     

Shock‐tube spectroscopic water measurements and detailed kinetics modeling of 1‐pentene and 3‐methyl‐1‐butene

To understand the effects of the chemical structure of two C₅ alkene isomers on their combustion properties, and to highlight the major chemical reactions occurring during their high‐temperature oxidation, water time histories were measured behind reflected shock waves for the oxidation of 1‐pentene (C₅H₁₀‐1) and 3‐methyl‐1‐butene (3M1B) in 99.5% Ar. The experiments were carried out at three different equivalence ratios (φ = 0.5, 1.0, and 2.0) at pressures and temperatures ranging from 1.29 to 1.47 atm and 1 331 to 1 877 K, respectively. The H₂O quantification extends the database for 1‐pentene and provides new insights for 3M1B. These unique results were used to validate and to develop a new detailed kinetics model. Numerical predictions are presented, and the new model was able to capture the results with suitable accuracy, with 3M1B being notably more reactive than C₅H₁₀‐1. Sensitivity and rate‐of‐production analyses were performed to help explain the results. Under the present conditions, the reactivity is rapidly initiated by molecular dissociation of a fraction of the pentene isomers. The initiation phase then induces H‐atom abstraction by active radicals (H, OH, O, HO₂, and CH₃) to first produce alkenyl C₅H₉ radicals (or an alkyl radical and an alkenyl radical by breaking a C─C bond) and subsequent, smaller fragments. The difference in terms of reactivity between the isomers is essentially due to the fact that 3M1B has one particularly weak tertiary allylic C─H bond, which allows for fast H‐atom abstraction compared with 1‐pentene.     

A theoretical study on the excited‐state intramolecular proton transfer mechanism of 4′‐dimethylaminoflavonol chemosensor

In this work, density functional theory (DFT) and time‐dependent density functional theory (TDDFT) methods are used to explore the excited‐state intramolecular proton transfer (ESIPT) mechanism of a novel system 4′‐dimethylaminoflavonol (DAF). By analyzing the molecular electrostatic potential (MEP) surface, we verify that the intramolecular hydrogen bond in DAF exists in both the S₀ and S₁ states. We calculate the absorption and emission spectra of DAF in two solvents, which reproduce the experimental results. By comparing the bond lengths, bond angles, and relative infrared (IR) vibrational spectra involved in the hydrogen bonding of DAF, we confirm the hydrogen‐bond strengthening in the S₁ state. For further exploring the photoexcitation, we use frontier molecular orbitals to analyze the charge redistribution properties, which indicate that the charge transfer in the hydrogen‐bond moiety may be facilitating the ESIPT process. The constructed potential energy curves in acetonitrile and methylcyclohexane solvents with shortened hydrogen bond distances demonstrate that proton transfer is more likely to occur in the S₁ state due to the lower potential barrier. Comparing the results in the two solvents, we find that aprotic polar and nonpolar solvents seem to play similar roles. This work not only clarifies the excited‐state behaviors of the DAF system but also successfully explains its spectral characteristics.     

M−O Bonding Beyond the Oxo Wall: Spectroscopy and Reactivity of Cobalt(III)‐Oxyl and Cobalt(III)‐Oxo Complexes

Terminal oxo complexes of late transition metals are frequently proposed reactive intermediates. However, they are scarcely known beyond Group 8. Using mass spectrometry, we prepared and characterized two such complexes: [(N4Py)Co^III(O)]⁺ ( 1 ) and [(N4Py)Co^IV(O)]²⁺ ( 2 ). Infrared photodissociation spectroscopy revealed that the Co?O bond in 1 is rather strong, in accordance with its lack of chemical reactivity. On the contrary, 2 has a very weak Co?O bond characterized by a stretching frequency of ≤659 cm^?1. Accordingly, 2 can abstract hydrogen atoms from non‐activated secondary alkanes. Previously, this reactivity has only been observed in the gas phase for small, coordinatively unsaturated metal complexes. Multireference ab‐initio calculations suggest that 2 , formally a cobalt(IV)‐oxo complex, is best described as cobalt(III)‐oxyl. Our results provide important data on changes to metal‐oxo bonding behind the oxo wall and show that cobalt‐oxo complexes are promising targets for developing highly active C?H oxidation catalysts.     

A Bioorthogonal Reaction of N‐Oxide and Boron Reagents

The development of bioorthogonal reactions has classically focused on bond‐forming ligation reactions. In this report, we seek to expand the functional repertoire of such transformations by introducing a new bond‐cleaving reaction between N‐oxide and boron reagents. The reaction features a large dynamic range of reactivity, showcasing second‐order rate constants as high as 2.3×10³ M ^?1 s^?1 using diboron reaction partners. Diboron reagents display minimal cell toxicity at millimolar concentrations, penetrate cell membranes, and effectively reduce N‐oxides inside mammalian cells. This new bioorthogonal process based on miniscule components is thus well‐suited for activating molecules within cells under chemical control. Furthermore, we demonstrate that the metabolic diversity of nature enables the use of naturally occurring functional groups that display inherent biocompatibility alongside abiotic components for organism‐specific applications.     

Non‐Pincer‐Type Mononuclear Scandium Alkylidene Complexes: Synthesis,Bonding, and Reactivity

The first non‐pincer‐type mononuclear scandium alkylidene complexes were synthesized and structurally characterized. These complexes exhibited short Sc?C bond lengths and even one of the shortest reported to date (2.1134(18) Å). The multiple character of the Sc?C bond was highlighted by a DFT calculation. This was confirmed by experimental reactivity study where the complex underwent [2+1] cycloaddition with elemental selenium and [2+2] cycloaddition with imine. DFT calculation also revealed a strong nucleophilic behavior of the alkylidene complex that was experimentally demonstrated by the C?H bond activation of phenylacetylene.     

Shedding Light on the Diverse Reactivity of NacNacAl with N‐Heterocycles

The aluminum(I) compound NacNacAl (NacNac=[ArNC(Me)CHC(Me)NAr]^?, Ar=2,6‐iPr₂C₆H₃, 1 ) shows diverse and substrate‐controlled reactivity in reactions with N‐heterocycles. 4‐Dimethylaminopyridine (DMAP), a basic substrate in which the 4‐position is blocked, induces rearrangement of NacNacAl by shifting a hydrogen atom from the methyl group of the NacNac backbone to the aluminum center. In contrast, C?H activation of the methyl group of 4‐picoline takes place to produce a species with a reactive terminal methylene. Reaction of 1 with 3,5‐lutidine results in the first example of an uncatalyzed, room‐temperature cleavage of an sp² C?H bond (in the 4‐position) by an Al^I species. Another reactivity mode was observed for quinoline, which undergoes 2,2′‐coupling. Finally, the reaction of 1 with phthalazine produces the product of N?N bond cleavage.     

Tuning the Reactivity of Cyclopropenes from Living Ring‐Opening Metathesis Polymerization (ROMP) to Single‐Addition and Alternating ROMP

Ring‐opening metathesis polymerization (ROMP) has become one of the most important living polymerizations. Cyclopropenes (CPEs) remain underexplored for ROMP. Described here is that the simple swap of 1‐methyl to 1‐phenyl on 1‐(benzoyloxymethyl)CPEs elicited strikingly different modes of reactivity, switching from living polymerization to either selective single‐addition or living alternating ROMP. The distinct reactivity stems from differences in steric repulsions at the Ru alkylidene after CPE ring opening. Possible olefin or oxygen chelation from ring‐opened CPE substituents was also observed to significantly affect the rate of propagation. These results demonstrate the versatility of CPEs as a new class of monomers for ROMP, provide mechanistic insights for designing new monomers with rare single‐addition reactivity, and generate a new functionalizable alternating copolymer scaffold with controlled molecular weight and low dispersity.     

Radical‐Based C−C Bond‐Forming Processes Enabled by the Photoexcitation of 4‐Alkyl‐1,4‐dihydropyridines

We report herein that 4‐alkyl‐1,4‐dihydropyridines (alkyl‐DHPs) can directly reach an electronically excited state upon light absorption and trigger the generation of C(sp³)‐centered radicals without the need for an external photocatalyst. Selective excitation with a violet‐light‐emitting diode turns alkyl‐DHPs into strong reducing agents that can activate reagents through single‐electron transfer manifolds while undergoing homolytic cleavage to generate radicals. We used this photochemical dual‐reactivity profile to trigger radical‐based carbon–carbon bond‐forming processes, including nickel‐catalyzed cross‐coupling reactions.     

Atom and Bond Fukui Functions and Matrices: A Hirshfeld‐I Atoms‐in‐Molecule Approach

The Fukui function is often used in its atom‐condensed form by isolating it from the molecular Fukui function using a chosen weight function for the atom in the molecule. Recently, Fukui functions and matrices for both atoms and bonds separately were introduced for semiempirical and ab initio levels of theory using Hückel and Mulliken atoms‐in‐molecule models. In this work, a double partitioning method of the Fukui matrix is proposed within the Hirshfeld‐I atoms‐in‐molecule framework. Diagonalizing the resulting atomic and bond matrices gives eigenvalues and eigenvectors (Fukui orbitals) describing the reactivity of atoms and bonds. The Fukui function is the diagonal element of the Fukui matrix and may be resolved in atom and bond contributions. The extra information contained in the atom and bond resolution of the Fukui matrices and functions is highlighted. The effect of the choice of weight function arising from the Hirshfeld‐I approach to obtain atom‐ and bond‐condensed Fukui functions is studied. A comparison of the results with those generated by using the Mulliken atoms‐in‐molecule approach shows low correlation between the two partitioning schemes.     

[Cu(NHC)]‐Catalyzed C−H Allylation and Alkenylation of both Electron‐Deficient and Electron‐Rich (Hetero)arenes with Allyl Halides

New reactivity of a [Cu(NHC)] (NHC=N‐heterocyclic carbene) catalyst is disclosed for the efficient C?H allylation of polyfluoroarenes using allyl halides in benzene at room temperature. The same catalyst system also promotes an isomerization‐induced alkenylation of initially the generated allyl arenes when the reaction is run in tetrahydrofuran. Significantly, not only electron‐deficient but also electron‐rich (hetero)arenes undergo this double‐bond migration process, thus leading to alkenylated products. The present system features mild reaction conditions, broad scope with respect to the arene substrates and allyl halide reactants, good functional‐group tolerance, and high stereoselectivity.     

Seventeen‐Coordinate Actinide Helium Complexes

The geometries and electronic structures of molecular ions featuring He atoms complexed to actinide cations are explored computationally using density functional and coupled cluster theories. A new record coordination number is established, as AcHe₁₇³⁺, ThHe₁₇⁴⁺, and PaHe₁₇⁴⁺ are all found to be true geometric minima, with the He atoms clearly located in the first shell around the actinide. Analysis of AcHe_n ³⁺ (n =1–17) using the quantum theory of atoms in molecules (QTAIM) confirms these systems as having closed shell, charge‐induced dipole bonding. Excellent correlations (R ²>0.95) are found between QTAIM metrics (bond critical point electron densities and delocalization indices) and the average Ac−He distances, and also with the incremental He binding energies.