A Fast‐Initiating Ionically Tagged Ruthenium Complex: A Robust Supported Pre‐catalyst for Batch‐Process and Continuous‐Flow Olefin Metathesis

In this study, a new pyridinium‐tagged Ru complex was designed and anchored onto sulfonated silica, thereby forming a robust and highly active supported olefin‐metathesis pre‐catalyst for applications under batch and continuous‐flow conditions. The involvement of an oxazine–benzylidene ligand allowed the reactivity of the formed Ru pre‐catalyst to be efficiently controlled through both steric and electronic activation. The oxazine scaffold facilitated the introduction of the pyridinium tag, thereby affording the corresponding cationic pre‐catalyst in good yield. Excellent activities in ring‐closing (RCM), cross (CM), and enyne metathesis were observed with only 0.5 mol % loading of the pre‐catalyst. When this powerful pre‐catalyst was immobilized onto a silica‐based cationic‐exchange resin, a versatile catalytically active material for batch reactions was generated that also served as fixed‐bed material for flow reactors. This system could be reused at 1 mol % loading to afford metathesis products in high purity with very low ruthenium contamination under batch conditions (below 5 ppm). Scavenging procedures for both batch and flow processes were conducted, which led to a lowering of the ruthenium content to as little as one tenth of the original values.     

Synthesis and Evaluation of Ruthenium 2‐Alkyl‐6‐mercaptophenolate Catalysts for Olefin Metathesis

A series of ruthenium carbene catalysts containing 2‐sulfidophenolate bidentate ligand with an ortho‐substituent next to the oxygen atom were synthesized. The molecular structure of ruthenium carbene complex containing 2‐isopropyl‐6‐sulfidophenolate ligand was confirmed through single crystal X‐ray diffraction. An oxygen atom can be found in the opposite position of the N‐heterocyclic carbene (NHC) based on the steric hindrance and strong trans‐effects of the NHC ligand. The ruthenium carbene catalyst can catalyze ring‐opening metathesis polymerization (ROMP) reaction of norbornene with high activity and Z‐selectivity and cross metathesis (CM) reactions of terminal alkenes with (Z)‐but‐2‐ene‐1,4‐diol to give Z‐olefin products (Z/E ratios, 70:30–89:11) in low yields (13%–38%). When AlCl₃ was added into the CM reactions, yields (51%–88%) were considerably improved and process becomes highly selective for E‐olefin products (E/Z ratios, 79:21–96:4). Similar to other ruthenium carbene catalysts, these new complexes can tolerate different functional groups.     

Oxygen‐chelated indenylidene ruthenium catalysts for olefin metathesis

Olefin metathesis is a transition metal‐mediated transformation that rearranges the carbon atoms of the carbon–carbon double bond of olefins. This reaction has become one of the most important and powerful reactions. Therefore development of new, well‐defined, highly active and selective catalysts is very desirable and a valuable goal. This mini‐review mainly introduces the development of ruthenium catalysts in olefin metathesis highlighting oxygen‐chelated indenylidene ruthenium catalysts. Applying an alkoxyl group on the indenylidene ligand fragment can generate the Ru ? O chelating bond. Additionally, various modifications of the ligand as well as the catalytic activity for ring‐closing metathesis reaction and selectivity of cross metathesis reaction are overviewed. Finally, the perspectives on the development of new catalysts are summarized. Copyright © 2015 John Wiley & Sons, Ltd.     

Organometall‐Reaktionen in Wasser

Water has attracted significant attention as an alternative solvent for organometallic reactions because it is nontoxic, nonflammable, and inexpensive, and is easily separated from organic products. Organometallic reactions, like the palladium‐catalyzed couplings of organic halides with organoboron compounds (Suzuki) and organotin reagents (Stille), are among the most widely used reactions for the formation of carbon‐carbon bonds. Owing to the discovery of water‐soluble, sulfonated phosphane derivatives and particularly the design of water‐soluble palladium‐catalysts it was possible to import these reactions into aqueous media. Another efficient, metal‐catalyzed, carbon‐carbon bond‐forming process that is nowadays possible in aqueous media is the olefin metathesis. The approaches so far include the use of water‐soluble ruthenium‐catalysts, surfactants and additives, ultrasonication, the introduction of polar quaternary ammonium groups or the incorporation of PEG as a water solubilizing moiety. The last point bears also a great potential for further developments in the removal of ruthenium‐containing byproducts. Additionally, water is the ideal reaction environment for polar, water soluble substrates such as natural product or pharmaceuticals.     

Studies on synthesis of quinonylidene Hoveyda‐type complexes

In a quest of redox‐switchable metathesis catalysts we attempted synthesis of ruthenium quinonylidene complexes using two synthetic pathways. First, Hoveyda‐type complexes bearing chelating benzylidene and naphthylidene ligands substituted with two alkoxy/hydroxy groups were synthesized and characterized. The catalysts were tested in model ring‐closing metathesis reactions, and displayed interesting correlations between structure and catalytic activity. Unfortunately, numerous attempts at oxidation of the complexes to derivatives of benzo‐ and naphthoquinone were unsuccessful. However, the second approach, using exchange reaction of ruthenium precursor with vinylquinone ligand, gave a transient unstable product observed with ¹H NMR. The experimental data suggest that conjugation of electron‐deficient quinones to the ruthenium centre results in intrinsically unstable species, which undergo secondary reactions under ambient conditions. Copyright © 2015 John Wiley & Sons, Ltd.     

Polymer‐Bound,Amphiphilic Hoveyda‐Grubbs‐Type Catalyst for Ring‐Closing Metathesis in Water

Summary: We report on the synthesis of a new amphiphilic, polymer‐bound variant of the Hoveyda‐Grubbs catalyst via the coupling reaction of a carboxylic acid‐functionalized poly(2‐oxazoline) block copolymer with 2‐isopropoxy‐5‐hydroxystyrene and subsequent reaction of the resulting macroligand with a second generation Grubbs catalyst. For the benchmark, the substrate diethyl diallylmalonate was studied in the ring‐closing metathesis (RCM) reaction and a turn‐over number (TON) of up to 390 in water was achieved. To the best of our knowledge, this is the highest value for any aqueous RCM reaction to date. For the first time, recycling of a ruthenium initiator in an aqueous RCM reaction has been successful to some extent. In addition, the micellar conditions accelerate the conversion of the hydrophobic diene and at the same time stabilize the active alkylidene species, although competing decomposition of the catalyst in water still impairs the catalyst performance. Residual ruthenium content was determined to be below 1 ppm in the product suggesting a very low leaching of the polymeric catalyst system.

Simplified chemical structure of the amphiphilic, polymer‐bound Grubbs‐Hoveyda catalyst.     

Oxidation of Organosilanes with Nanoporous Copper as a Sustainable Non‐Noble‐Metal Catalyst

Although many noble‐metal catalysts have been used for the oxidation of organosilanes, there has been less success with non‐noble‐metal catalysts. Here, unsupported nanoporous copper (np‐Cu) is used to catalyze the oxidation of organosilanes under mild conditions. It is the first time that this reaction has been achieved with a heterogeneous copper catalyst with high activity and selectivity. Both water and alcohols are used as oxidants and the corresponding organosilanols and organosilyl ethers are obtained in high yield. The possible mechanism was obtained by kinetic studies. The catalyst could be reused at least five times without evident loss of activity. As a novel green catalyst np‐Cu should play a unique role in organic synthesis.     

Reactions in Water – A Greener Approach Using Ruthenium Catalysts

Reactions using transition metals as catalysts have emerged as an efficient method in the recent times. However, the selection of solvent plays a crucial role in this regard. Several solvents used traditionally suffer majorly with problems of toxicity; high boiling point etc. leading to drastic reaction conditions. Water being a non‐toxic, non‐inflammable and environmentally benign can replace the hazardous organic solvents in laboratory as well as industry. Maintaining a minimum catalyst loading percentage we can advantageously avail high levels of selectivity. Water was found to be a good solvent medium for several metal catalysed reactions. An intramolecular deprotonation mechanism is followed by the ruthenium (II) catalysts in water; thereby, facilitating the catalytic action of the metal. These studies can help the industrial chemists to utilize water as a solvent for their reactions towards improvement of their waste management procedure. This review mainly focuses on the several recent developments in the above direction.     

Z‐Selective Cross Metathesis with Ruthenium Catalysts: Synthetic Applications and Mechanistic Implications

Olefin cross metathesis is a particularly powerful transformation that has been exploited extensively for the formation of complex products. Until recently, however, constructing Z‐olefins using this methodology was not possible. With the discovery and development of three families of ruthenium‐based Z‐selective catalysts, the formation of Z‐olefins using metathesis is now not only possible but becoming increasingly prevalent in the literature. In particular, ruthenium complexes containing cyclometalated NHC architectures developed in our group have been shown to catalyze various cross metathesis reactions with high activity and, in most cases, near perfect selectivity for the Z‐isomer. The types of cross metathesis reactions investigated thus far are presented here and explored in depth.     

Ring‐opening metathesis polymerization of cis‐cyanocyclooct‐4‐ene: Search for active catalysts,variation of monomer to catalyst ratios and monomer concentrations

The ring‐opening metathesis polymerization (ROMP) of cis‐cyanocyclooct‐4‐ene initiated by ruthenium‐based catalysts of the first, second, and third generation was studied. For the polymerization with the second generation Grubbs catalyst [RuCl₂(?CHPh)(H₂IMes)(PCy₃)] (H₂IMes = N,N′‐bis(mesityl)‐4,5‐dihydroimidazol‐2‐ylidene), the critical monomer concentration at which polymerization occurs was determined, and variation of monomer to catalyst ratios was performed. For this catalyst, ROMP of cis‐cyanocyclooct‐4‐ene did not show the features of a living polymerization as M_n did not linearly increase with increasing monomer conversion. As a consequence of slow initiation rates and intramolecular polymer degradation, molar masses passed through a maximum during the course of the polymerization. With third generation ruthenium catalysts (which contain 3‐bromo or 2‐methylpyridine ligands), polymerization proceeded rapidly, and degradation reactions could not be observed. Contrary to ruthenium‐based catalysts of the second and third generation, a catalyst of the first generation was not able to polymerize cis‐cyanocyclooct‐4‐ene. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Chemodivergent Metathesis of Dienynes Catalyzed by Ruthenium–Indenylidene Complexes: An Experimental and Computational Study

A study on the enyne metathesis reaction leading to the formation cyclic compounds using ruthenium–indenylidene complexes is presented. Several 1,11‐dien‐6‐ynes have been subjected to ruthenium metathesis cyclization by using ruthenium–indenylidene complexes bearing various phosphine and N‐heterocyclic carbene (NHC) ligands. Interestingly, for some substrates chemodivergent metathesis occurs and is a function of the catalyst employed. This led us to investigate the competing “ene‐then‐yne” or “yne‐then‐ene” reaction pathways apparently at play in these systems using both experimental observations and DFT calculations. Experimental and computational studies were found in good agreement and permit to conclude that for phosphine‐containing catalysts, the “ene‐then‐yne” pathway is exclusively adopted. On the other hand, for catalysts bearing NHC ligands, both pathways are possible.     

One‐Pot,Three‐Component Synthesis of 1‐(2‐Hydroxyethyl)‐1H‐1,2,3‐triazole Derivatives by Copper‐Catalyzed 1,3‐Dipolar Cycloaddition of 2‐Azido Alcohols and Terminal Alkynes under Mild Conditions in Water

A safe, efficient, and improved procedure for the regioselective synthesis of 1‐(2‐hydroxyethyl)‐1H‐1,2,3‐triazole derivatives under ambient conditions is described. Terminal alkynes reacted with oxiranes and NaN₃ in the presence of a copper(I) catalyst, which is prepared by in situ reduction of the copper(II) complex 4 with ascorbic acid, in H₂O. The regioselective reactions exclusively gave the corresponding 1,4‐disubstituted 1H‐1,2,3‐triazoles in good to excellent yields. This procedure avoids the handling of organic azides as they are generated in situ, making this already powerful click process even more user‐friendly and safe. The remarkable features of this protocol are high yields, very short reaction times, a cleaner reaction profile in an environmentally benign solvent (H₂O), its straightforwardness, and the use of nontoxic catalysts. Furthermore, the catalyst could be recovered and recycled by simple filtration of the reaction mixture and reused for ten consecutive trials without significant loss of catalytic activity. No metal‐complex leaching was observed after the consecutive catalytic reactions.     

胺基膦钌卡宾化合物的合成及催化烯烃复分解反应

合成并表征了一类含新型胺基膦配体的Grubbs二代型钌卡宾烯烃复分解催化剂[RuCl₂(H₂IMes)·(R¹HNPR²₂)(=CHPh)], 采用核磁共振波谱和单晶X射线衍射确定了催化剂的结构. 在室温条件下, 以N,N-二烯丙基-对甲苯磺酰胺的关环复分解反应(RCM)为模型, 考察了不同胺基膦配体对钌卡宾催化反应速率的影响. 结果表明, G2?1表现出最佳的催化活性. 通过底物研究发现, G2?1催化剂(摩尔分数, 1%)对双端烯及多端烯的RCM反应具有较好的活性和官能团适应性, 产物收率均>95%; G2?1催化剂同样适用于同(异)端烯底物的交叉复分解反应(CM), 其催化苯乙烯与3-苯氧基丙烯的CM反应时产物收率高达92%.     

Single Turnover at Molecular Polymerization Catalysts Reveals Spatiotemporally Resolved Reactions

Multiple active individual molecular ruthenium catalysts have been pinpointed within growing polynorbornene, thereby revealing information on the reaction dynamics and location that is unavailable through traditional ensemble experiments. This is the first single‐turnover imaging of a molecular catalyst by fluorescence microscopy and allows detection of individual monomer reactions at an industrially important molecular ruthenium ring‐opening metathesis polymerization (ROMP) catalyst under synthetically relevant conditions (e.g. unmodified industrial catalyst, ambient pressure, condensed phase, ca. 0.03 m monomer). These results further establish the key fundamentals of this imaging technique for characterizing the reactivity and location of active molecular catalysts even when they are the minor components.     

Highly Active Carbene Ruthenium Catalyst for Metathesis of 1-Hexene

A new carbene ruthenium complex, 1,3-bis（2,6-dimethylphenyl）-4,5-dihydroimidazol-2-ylidene）（PPh3）Cl2-Ru=CHPh, was synthesized and used as catalyst for the metathesis of 1-hexene. The resulting complex exhibited very high catalytic activity whose TOF is up to 6680 h^-1. However, at the same time significant olefin isomerization was observed and could be surpressed by changing reaction conditions, such as temperature, time, alkene/Ru molar ratio and solvent.     

Cyclic Alkyl Amino Carbene (CAAC) Ruthenium Complexes as Remarkably Active Catalysts for Ethenolysis

An expanded family of ruthenium‐based metathesis catalysts bearing cyclic alkyl amino carbene (CAAC) ligands was prepared. These catalysts exhibited exceptional activity in the ethenolysis of the seed‐oil derivative methyl oleate. In many cases, catalyst turnover numbers (TONs) of more than 100 000 were achieved, at a catalyst loading of only 3 ppm. Remarkably, the most active catalyst system was able to achieve a TON of 340 000, at a catalyst loading of only 1 ppm. This is the first time a series of metathesis catalysts has exhibited such high performance in cross‐metathesis reactions employing ethylene gas, with activities sufficient to render ethenolysis applicable to the industrial‐scale production of linear α‐olefins (LAOs) and other terminal‐olefin products.     

Studies on Electronic Effects in O‐, N‐ and S‐Chelated Ruthenium Olefin‐Metathesis Catalysts

A short overview on the structural design of the Hoveyda–Grubbs‐type ruthenium initiators chelated through oxygen, nitrogen or sulfur atoms is presented. Our aim was to compare and contrast O‐, N‐ and S‐chelated ruthenium complexes to better understand the impact of electron‐withdrawing and ‐donating substituents on the geometry and activity of the ruthenium complexes and to gain further insight into the trans–cis isomerisation process of the S‐chelated complexes. To evaluate the different effects of chelating heteroatoms and to probe electronic effects on sulfur‐ and nitrogen‐chelated latent catalysts, we synthesised a series of novel complexes. These catalysts were compared against two well‐known oxygen‐chelated initiators and a sulfoxide‐chelated complex. The structures of the new complexes have been determined by single‐crystal X‐ray diffraction and analysed to search for correlations between the structural features and activity. The replacement of the oxygen‐chelating atom by a sulfur or nitrogen atom resulted in catalysts that were inert at room temperature for typical ring‐closing metathesis (RCM) and cross‐metathesis reactions and showed catalytic activity only at higher temperatures. Furthermore, one nitrogen‐chelated initiator demonstrated thermo‐switchable behaviour in RCM reactions, similar to its sulfur‐chelated counterparts.     

Triazole‐Containing Dendrimer‐like Core Cross‐Linked Micelles that Stabilize Pd Nanoparticles as Heterogenized Homogeneous Catalysts for Room‐Temperature Suzuki–Miyaura Reactions in Water

Featuring the advantages of both homogeneous (high activity) and heterogeneous (recyclability) catalysts, heterogenized homogeneous catalysts (e.g., dendrimer‐stabilized metal nanoparticles) have received much attention in recent years. Here, we develop a new triazole‐containing dendrimer‐like core cross‐linked micelle (DCCM) stabilized Pd nanoparticles as a highly efficient heterogenized homogeneous catalyst for the Suzuki–Miyaura reaction. Both arylboronic acids and iodobenzenes with diverse electronic properties performed with excellent reactivity under the mild conditions of room temperature, water as the sole solvent, and as low as 0.5 % catalyst loading. Importantly, the Pd@triazole‐DCCMs can tolerate various functional groups well (e.g., alcohol, aldehyde, ester, acyl, amino, and cyano, etc.) and give the corresponding biphenyl products in high yields. Recycling experiments suggest that the new heterogenized homogeneous catalyst can be recovered simply and reused many times with negligible activity change.     

Piperazine‐functionalized nickel ferrite nanoparticles as efficient and reusable catalysts for the solvent‐free synthesis of 2‐amino‐4H‐chromenes

Piperazine‐functionalized nickel ferrite (NiFe₂O₄) nanoparticles were synthesized as recoverable heterogeneous base catalysts using a routine method. The synthesized materials were characterized using various spectroscopic techniques such as infrared, X‐ray diffraction, scanning electron microscopy, energy‐dispersive X‐ray, thermogravimetry analysis, and vibrating sample magnetometry. Catalytic efficiency was investigated in the synthesis of 2‐amino‐4H‐chromene derivatives via a one‐pot three component reaction of aldehyde and malononitrile with β or α‐naphthol/5‐methyle resorcinol under solvent‐free conditions with good to high yields. This method is operationally simple and has several advantages such as good to high yield, short reaction times, solvent‐free conditions, and easy synthesis. Moreover, the catalyst was recovered easily using an external magnet and reused three times without distinctive loss in catalytic activity.     

The doping effect of fluorinated aromatic solvents on the rate of ruthenium-catalysed olefin metathesis

A study concerning the effect of using a fluorinated aromatic solvent as the medium for olefin metathesis reactions catalysed by ruthenium complexes bearing N-heterocyclic carbene ligands is presented. The use of fluorinated aromatic hydrocarbons (FAH) as solvents for olefin metathesis reactions catalysed by standard commercially available ruthenium pre-catalysts allows substantially higher yields of the desired products to be obtained, especially in the case of demanding polyfunctional molecules, including natural and biologically active compounds. Interactions between the FAH and the second-generation ruthenium catalysts, which apparently improve the efficiency of the olefin metathesis transformation, have been studied by X-ray structure analysis and computations, as well as by carrying out a number of metathesis experiments. The optimisation of reaction conditions by using an FAH can be regarded as a complementary approach for the design of new improved ruthenium catalysts. Fluorinated aromatic solvents are an attractive alternative medium for promoting challenging olefin metathesis reactions.