Metal-based Heterogeneous Catalysts for One-Pot Synthesis of Secondary Anilines from Nitroarenes and Aldehydes

Recently, N-substituted anilines have been the object of increasing research interest in the field of organic chemistry due to their role as key intermediates for the synthesis of important compounds such as polymers, dyes, drugs, agrochemicals and pharmaceutical products. Among the various methods reported in literature for the formation of C–N bonds to access secondary anilines, the one-pot reductive amination of aldehydes with nitroarenes is the most interesting procedure, because it allows to obtain diverse N-substituted aryl amines by simple reduction of nitro compounds followed by condensation with aldehydes and subsequent reduction of the imine intermediates. These kinds of tandem reactions are generally catalyzed by transition metal-based catalysts, mainly potentially reusable metal nanoparticles. The rapid growth in the last years in the field of metal-based heterogeneous catalysts for the one-pot reductive amination of aldehydes with nitroarenes demands for a review on the state of the art with a special emphasis on the different kinds of metals used as catalysts and their recyclability features.     

Chemoselective Hydrazine‐mediated Transfer Hydrogenation of Nitroarenes by Co3O4 Nanoparticles Immobilized on an Al/Si‐mixed Oxide Support

Cobalt oxide nanoparticles (size 2 to 3.5 nm) were successfully impregnated on an alumina–silica (mixed oxide) support through an experimentally viable and easily reproducible protocol. The prepared material was well characterized by XRD, HR‐TEM, BET surface area, EDX and XPS analyses. Porous alumina–silica having a high surface area served as a protective heterogeneous support on which the well‐dispersed Co₃O₄ nanoparticles served as an active catalytic species for the hydrazine‐mediated transfer hydrogenation of nitroarenes. About 2 mol % of the active catalyst in ethanol at 60 °C was adequate for a successful conversion. Moreover, transfer hydrogenation of nitroarenes by the catalyst was found to take place chemoselectively in the presence of other labile functional groups such as halide, alkene, nitrile, carbonyl, and ester. This inexpensive catalyst was also able to catalyze the reaction on a gram scale reaction and found to be robust and recyclable up to eight runs.     

Visible‐Light‐Driven Chemoselective Hydrogenation of Nitroarenes to Anilines in Water through Graphitic Carbon Nitride Metal‐Free Photocatalysis

Green and efficient procedures are essential for the chemoselective hydrogenation of functionalized nitroarenes to form industrially important anilines. Herein, it is shown that visible‐light‐driven, chemoselective hydrogenation of functionalized nitroarenes with groups sensitive to forming anilines can be achieved in good to excellent yields (82–100 %) in water under relatively mild conditions and catalyzed by low‐cost and recyclable graphitic carbon nitride. The process is also applicable to gram‐scale reaction, with a yield of aniline of 86 %. A study of the mechanism reveals that visible‐light‐induced electrons are responsible for the hydrogenation reactions, and thermal energy can also promote the photocatalytic activity. A study of the kinetics shows that this reaction possibly occurs through one‐step hydrogenation or stepwise condensation routes. A wide range of applications can be expected for this green, efficient, and highly selective photocatalysis system in reduction reactions for the synthesis of fine chemicals.     

Gold‐Catalyzed Direct Hydrogenative Coupling of Nitroarenes To Synthesize Aromatic Azo Compounds

The azo linkage is a prominent chemical motif which has found numerous applications in materials science, pharmaceuticals, and agrochemicals. Described herein is a sustainable heterogeneous‐gold‐catalyzed synthesis of azo arenes. Available nitroarenes are deoxygenated and linked selectively by the formation of N?N bonds using molecular H₂ without any external additives. As a result of a unique and remarkable synergy between the metal and support, a facile surface‐mediated condensation of nitroso and hydroxylamine intermediates is enabled, and the desired transformation proceeds in a highly selective manner under mild reaction conditions. The protocol tolerates a large variety of functional groups and offers a general and versatile method for the environmentally friendly synthesis of symmetric or asymmetric aromatic azo compounds.     

Highly Active and Selective Manganese C=O Bond Hydrogenation Catalysts: The Importance of the Multidentate Ligand,the Ancillary Ligands,and the Oxidation State

The replacement of expensive noble metals by earth‐abundant transition metals is a central topic in catalysis. Herein, we introduce a highly active and selective homogeneous manganese‐based C=O bond hydrogenation catalyst. Our catalyst has a broad substrate scope, it is able to hydrogenate aryl–alkyl, diaryl, dialkyl, and cycloalkyl ketones as well as aldehydes. A very good functional group tolerance including the quantitative and selective hydrogenation of a ketone in the presence of a non‐shielded olefin is observed. In Mn hydrogenation catalysis, the combination of the multidentate ligand, the oxidation state of the metal, and the choice of the right ancillary ligand is crucial for high activity. This observation emphasizes an advantage and the importance of homogeneous catalysts in 3d‐metal catalysis. For coordination compounds, fine‐tuning of a complex coordination environment is easily accomplished in comparison to enzyme and/or heterogeneous catalysts.     

Metal Nanoparticles Supported on Biomass‐Derived Hierarchical Porous Heteroatom‐Doped Carbon from Bamboo Shoots: Design,Synthesis and Applications

Heteroatom‐doped porous carbon derived from biomass have recently received increasing attention due to their unique properties such as high electrical conductivity, large specific surface area, high porosity, and easy availability, which are appealing materials for versatile applications in catalysis, energy, separation and adsorption, and life sciences as well. On the basis of our previous work in this field, we summarized in this account our recent progress on design, synthesis of metal (e. g., Pd, Co) nanoparticles supported heteroatom‐doped hierarchical porous carbon material derived from bamboo shoots and their applications for important organic transformations, including chemoselective semihydrogenation of alkynes, hydrosilylation of alkynes, cascade synthesis of benzofurans from terminal alkynes and iodophenols, selective hydrogenation of functionalized nitroarenes to form anilines, imines, and formamides. Finally, the current state and future challenges in this field are discussed. We hope this account could shed light on the rational design of novel non‐noble metal based heterogeneous catalysts derived from biomass for efficient and sustainable organic transformations.     

Ni2P Nanoalloy as an Air-Stable and Versatile Hydrogenation Catalyst in Water: P-Alloying Strategy for Designing Smart Catalysts

Non-noble metal-based hydrogenation catalysts have limited practical applications because they exhibit low activity, require harsh reaction conditions, and are unstable in air. To overcome these limitations, herein we propose the alloying of non-noble metal nanoparticles with phosphorus as a promising strategy for developing smart catalysts that exhibit both excellent activity and air stability. We synthesized a novel nickel phosphide nanoalloy (nano-Ni₂P) with coordinatively unsaturated Ni active sites. Unlike conventional air-unstable non-noble metal catalysts, nano-Ni₂P retained its metallic nature in air, and exhibited a high activity for the hydrogenation of various substrates with polar functional groups, such as aldehydes, ketones, nitriles, and nitroarenes to the desired products in excellent yields in water. Furthermore, the used nano-Ni₂P catalyst was easy to handle in air and could be reused without pretreatment, providing a simple and clean catalyst system for general hydrogenation reactions.     

硝基芳烃与醇还原胺化:催化剂和催化机制

胺类化合物由于其化学结构和性质上的特点,在合成药物、染料和精细化学品等方面有着重要的应用。胺类化合物的合成方法很多,其中硝基芳烃与醇还原胺化反应由于可以“一锅”法将性质稳定、来源广泛的硝基芳烃、醇转化为各类胺类化合物,且无需提供额外的氢源,从而成为研究的热点。本文即以硝基芳烃与醇还原胺化反应路径为主线,从催化剂及其催化机制两方面对硝基芳烃与醇还原胺化反应的研究进展进行综述,分别对已开发的贵金属催化剂、光催化剂及一些其他类型催化剂作了介绍,重点阐述了催化剂的催化性能、底物适用范围和催化机制。尽管目前各类催化体系都已取得较大的进展,但在一定程度上依然存在着催化剂成本高,底物适应性窄,需要大量使用碱性助剂、溶剂、供氢试剂等问题。基于以上问题,本文指出硝基芳烃与醇还原胺化应重点发展绿色高效、廉价、普适性好、通用性强的催化体系;同时,还要系统地对各种催化剂的催化机制进行深入的研究,为催化体系的开发提供指导。     

High yield synthesis of intrinsic, doped and composites of nano-zinc oxide using novel combinatorial method

A novel synthesis of the production of luminescent zinc oxide (ZnO), either in its intrinsic, metal, non-metal-doped or composite forms with high yield has been developed by parallel iterative techniques, within a combinatorial library prepared by the reduction of nitroarenes. The reduction of nitroarenes by aluminium/zinc dusts in alkaline medium (pH 10±2) forms azoxy compounds, whereas in acidic medium (pH 4.9±0.2) forms phenyl hydroxylamine and zinc/aluminium dust gets oxidised into respective hydroxide. Here, we demonstrate the reduction of nitroarenes at neutral pH (7.0±0.2), which forms intrinsic as well as doped ZnO at 50±5°C using zinc dust alone or mixtures of salts of several transition and non-transition metals in presence of 1:10 ratio of solvent and water. Interestingly, it is observed that the photoluminescence emission could be tuned in a wide range from 390 to 615 nm useful for many display related devices.     

Transfer Hydrogenation of Nitroarenes Catalyzed by CoCu Anchored on Nitrogen-doped Porous Carbon

The non-precious metal catalysts with high catalytic activity is extremely desirable but still full of challenges. In this paper, CoCu bimetal immobilized on nitrogen-doped porous carbon (CoCu-N-C) was prepared by an effective ligand-stabilized pyrolysis strategy. CoCu-N-C exhibited excellent catalytic efficiency for the transfer hydrogenation of nitroarenes with ammonia borane as hydrogen source, which can be ascribed to the well dispersed metal nanoparticles, the synergetic interaction of CoCu bimetal and nitrogen-doped carbon. The durability and recyclability experiments of the recycled CoCu-N-C catalyst indicated that no obvious change in catalytic performance was observed after five consecutive cycles. To gain insight into the catalytic mechanism of CoCu-N-C for the hydrogenation reaction, density functional theory calculations was also conducted. This work provides an universal approach for constructing highly efficient non-precious metal heterogeneous catalysts and which may find diverse high performance applications.     

Photochemically Engineering the Metal–Semiconductor Interface for Room‐Temperature Transfer Hydrogenation of Nitroarenes with Formic Acid

A mild photochemical approach was applied to construct highly coupled metal–semiconductor dyads, which were found to efficiently facilitate the hydrogenation of nitrobenzene. Aniline was produced in excellent yield (>99 %, TOF: 1183) using formic acid as hydrogen source and water as solvent at room temperature. This general and green catalytic process is applicable to a wide range of nitroarenes without the involvement of high‐pressure gases or sacrificial additives.     

Mild and Efficient PtO2-Catalyzed One-Pot Reductive Mono-N-alkylation of Nitroarenes

A mild and efficient one-pot reductive monoalkylation of nitroarenes has been described using aldehydes as alkylating agents, molecular hydrogen as a reducing agent, and PtO₂ as a catalyst in methanol. This methodology is found to be applicable for both aliphatic and aromatic aldehydes and for a wide variety of nitroarenes.

Supplemental materials are available for this article. Go to the publisher's online edition of Synthetic Commuications® to view the free supplemental file.     

Cascade Synthesis of Pyrroles from Nitroarenes with Benign Reductants Using a Heterogeneous Cobalt Catalyst

A bifunctional 3d-metal catalyst for the cascade synthesis of diverse pyrroles from nitroarenes is presented. The optimal catalytic system Co/NGr-C@SiO₂-L is obtained by pyrolysis of a cobalt-impregnated composite followed by subsequent selective leaching. In the presence of this material, (transfer) hydrogenation of easily available nitroarenes and subsequent Paal–Knorr/Clauson-Kass condensation provides >40 pyrroles in good to high yields using dihydrogen, formic acid, or a CO/H₂O mixture (WGSR conditions) as reductant. In addition to the favorable step economy, this straightforward domino process does not require any solvents or external co-catalysts. The general synthetic utility of this methodology was demonstrated on a variety of functionalized substrates including the preparation of biologically active and pharmaceutically relevant compounds, for example, (+)-Isamoltane.     

Palladium‐Catalyzed Methylation of Nitroarenes with Methanol

A procedure for the synthesis of N‐methyl‐arylamines directly from nitroarenes using methanol as green methylating agent was developed. The key to success is the use of a specific catalyst system consisting of palladium acetate and the ligand 1‐[2,6‐bis(isopropyl)phenyl]‐2‐[tert‐butyl(2‐pyridinyl)phosphino]‐1H‐Imidazole ( L1 ). The generality of this protocol is demonstrated in the synthesis of more than 20 N‐methyl‐arylamines under comparably mild conditions. Combining this novel methodology with subsequent coupling processes using the same catalyst allows for efficient diversification of aromatic nitro compounds to a broad variety of amines including drug molecules.     

Zeolite‐Encaged Single‐Atom Rhodium Catalysts: Highly‐Efficient Hydrogen Generation and Shape‐Selective Tandem Hydrogenation of Nitroarenes

Single‐atom catalysts are emerging as a new frontier in heterogeneous catalysis because of their maximum atom utilization efficiency, but they usually suffer from inferior stability. Herein, we synthesized single‐atom Rh catalysts embedded in MFI ‐type zeolites under hydrothermal conditions and subsequent ligand‐protected direct H₂ reduction. C_s‐corrected scanning transmission electron microscopy and extended X‐ray absorption analyses revealed that single Rh atoms were encapsulated within 5‐membered rings and stabilized by zeolite framework oxygen atoms. The resultant catalysts exhibited excellent H₂ generation rates from ammonia borane (AB) hydrolysis, up to 699 min^?1 at 298 K, representing the top level among heterogeneous catalysts for AB hydrolysis. The catalysts also showed superior catalytic performance in shape‐selective tandem hydrogenation of various nitroarenes by coupling with AB hydrolysis, giving >99 % yield of corresponding amine products.     

Poly(amic acid) salt‐mediated palladium and platinum nanoparticles as highly active and recyclable catalysts for hydrogenation of nitroarenes in water under ambient conditions

Development of highly active and recyclable catalysts for selective hydrogenation of nitroarenes to amines in water at room temperature is always a challenge in chemical industry. This study reports a facile in situ method for synthesis of ultrafine palladium and platinum nanoparticles (NPs) stabilized by poly (amic acid) salt (PAAS) and their potential as catalysts for hydrogenation of nitroarenes with sodium borohydride or molecular hydrogen as reductant in water at room temperature. In the reduction of 4‐nitrophenol to 4‐aminophenol by sodium borohydride, the activity parameters of PdNPs–PAAS and PtNPs–PAAS catalyst is 6.66 × 10³ and 5.58 × 10³ s^?1 M^?1 respectively. In the hydrogenation of diverse nitroarenes under atmospheric hydrogen pressure, PdNPs–PAAS shows high activity but poor selectivity toward desired amines in some cases, while PtNPs–PAAS shows both high activity and high selectivity for selective hydrogenation of nitroarenes to corresponding anilines. The high efficiency of nanocatalyst is due to the quasi‐homogeneous dispersion of metal NPs and synergistic effects between metal NPs and PAAS. In addition, nanocatalyst can be easily recovered with pH‐sensibility of PAAS and reused at least six times without significant loss of catalytic activities.     

3 d Transition Metal‐Catalyzed Hydrogenation of Nitriles and Alkynes

Selective hydrogenation of nitriles and alkynes is crucial considering the vast applications of reduced products in industries and in the synthesis of bioactive compounds. Particularly, the late 3d transition metal catalysts (manganese, iron, cobalt, nickel and copper) have shown promising activity for the hydrogenation of nitriles to primary amines, secondary amines and imines. Similarly, semihydrogenation of alkynes to E‐ and Z‐alkenes by 3d metals is adequately successful both via the transfer hydrogenation and by using molecular hydrogen. The emergence of 3d transition metals in the selective synthesis of industrially relevant amines, imines and alkenes makes this protocol more attractive. Herein, we provide a concise overview on the late 3d transition metal‐catalyzed hydrogenation of nitriles to amines and imines as well as semihydrogenation of alkynes to alkenes.     

Recent advances in the application of nanoparticles in the selective reduction of carbon–carbon double bonds

Herein, we present recent advances in the application of metal nanoparticles in the selective hydrogenation of C–C double bonds. The review focuses on reduction methods of alkenes, arenes, and aromatic heterocycles, which were classified according to transition metals used as catalysts. The majority of described systems concern direct hydrogenation, which is of particular importance to industrial processes. Nonetheless, interesting transfer hydrogenation protocols were also developed, which may be incredibly convenient for laboratory purposes. Some of the methods are distinguished with excellent chemoselectivity making them the perfect tool for the synthesis of compounds containing reducible functional groups. Apart from noble metals, the application of earth-abundant ones as catalysts was a subject of studies, and the related methods were highlighted.     

Hydrogen Bonding Enhances the Electrochemical Hydrogenation of Benzaldehyde in the Aqueous Phase

The hydrogenation of benzaldehyde to benzyl alcohol on carbon‐supported metals in water, enabled by an external potential, is markedly promoted by polarization of the functional groups. The presence of polar co‐adsorbates, such as substituted phenols, enhances the hydrogenation rate of the aldehyde by two effects, that is, polarizing the carbonyl group and increasing the probability of forming a transition state for H addition. These two effects enable a hydrogenation route, in which phenol acts as a conduit for proton addition, with a higher rate than the direct proton transfer from hydronium ions. The fast hydrogenation enabled by the presence of phenol and applied potential overcompensates for the decrease in coverage of benzaldehyde caused by competitive adsorption. A higher acid strength of the co‐adsorbate increases the intensity of interactions and the rates of selective carbonyl reduction.     

Gold nanoparticles anchored onto the magnetic poly(ionic‐liquid) polymer as robust and recoverable catalyst for reduction of Nitroarenes

Gold nanoparticles supported on poly ionic‐liquid magnetic nanoparticles (MNP@PIL@Au) were synthesized by reduction of HAuCl4 with sodium borohydride. The synthesized catalyst was characterized using by AAS, TEM, FT‐IR, EDS, TGA and XRD techniques. The performance of the synthesized catalyst was investigated in the reduction of nitroarenes with NaBH₄. The reaction was carried out for various nitroarenes in water and mild conditions with high yields. The catalyst selectivity for the reduction of nitro group in the presences of other functional groups such as halides and alkynes was fairly well. The recycling of the catalyst was done 8 times without any significant loss of its catalytic activity.