Synthesis, spectral studies and complexation properties of N,N′-bis(5-bromo-salicylidene)-2-hydroxy-1,3-propanediamine (BSHP) and iron extraction with BSHP from oils

A Schiff base was synthesized by reaction of 1,3-diamino-2-propanol and 5-bromo-2-hydroxy benzaldehyde. The Schiff base N,N′-bis(5-bromo-salicylidene)-2-hydroxy-1,3-propanediamine (BSHP) was characterized by elemental analysis, ¹H NMR, ¹³C NMR, IR, UV-Vis spectral studies. The complexation of iron with BSHP was investigated spectrophotometrically. The extraction of iron from oil phase to aqueous phase was carried out with BSHP. Extraction conditions were optimized using central composite design. Optimum extraction conditions were found to be 32°C, 2 mL/g for the ratio of the volume of the Schiff base solution to the amount of oil, and 11 min for the stirring time. The method has been validated by using oil based metal standard, obtaining satisfactory results. The limit of detection (LOD) of the improved method is 0.04 μg/g. It has been applied to analysis of different oil samples. The concentrations of iron in olive, sunflower and corn oils were found to be 0.65 ± 0.02, 0.41 ± 0.01, 0.36 ± 0.03 μg/g, respectively. A simple, cheap, rapid, efficient, sensitive and accurate alternative analytical method for the iron determination in oils has been presented in this paper.     

Extraction chromatographic method for the separation of actinides and lanthanides using EDHBA grafted AXAD-16 polymer

A new extraction chromatographic method has been developed by grafting chloromethylated polymer support with 4-ethoxy-N,N-dihexylbutanamide (EDHBA), for the selective extraction of U(VI), Th(IV), La(III) and Nd(III) from highly acidic matrices. The developed grafted polymer has been characterized using ¹³C-CPMAS NMR spectroscopy, FT-NIR spectroscopy and also by CHN elemental analysis. The water regaining capacity of the grafted polymer is studied by TGA measurements and the active participation of the amide moiety towards metal ion complexation has been confirmed by Far IR spectroscopy. For the quantitative extraction of metal ions to the resin phase, various physio-chemical parameters are optimized by both static and dynamic methods. The developed amide grafted polymeric matrix shows good distribution ratio values even at high acidities, with the maximum metal sorption capacity values being 0.36, 0.69, 0.32 and 0.42 mmol g⁻¹ for U(VI), Th(IV), La(III) and Nd(III), respectively, at 6 M HNO₃ medium. The kinetics of metal ion phase equilibration is found to be moderately fast, with t_1/2 values of <6 min, for all the analytes of interest. The limits of analyte quantification (LOQ) using the developed method are in the range of 15-30 μg L⁻¹. Moreover, the sequential separation of the sorbed actinides and lanthanides could be achieved by first eluting with 100 mL of distilled water (for actinides) followed by elution with 20 mL of 0.1 M EDTA (for lanthanides). The selectivity behavior and the practical applicability of the developed resin are tested using synthetic low level nuclear reprocessing mixtures and also with monazite sand. The analytical data are within 3.8% relative standard deviation, reflecting the reproducibility and reliability of the developed method.     

Novel molecularly imprinted polymer prepared by nanoattapulgite as matrix for selective solid-phase extraction of diethylstilbestrol

Using nanoattapulgite as matrix, both diethylstilbestrol surface molecularly imprinted polymer and non-imprinted polymer were synthesized in this work. Compared with each other, the diethylstilbestrol surface molecularly imprinted polymer is superior to non-imprinted polymer in adsorption capacity, selectivity and mass transfer property. The maximum static adsorption capacities of diethylstilbestrol surface molecularly imprinted polymer, non-imprinted polymer and nanoattapulgite for diethylstilbestrol was 105.14, 78.54 and 28.50 mg g⁻¹, respectively. As the packing material of solid-phase extraction, the diethylstilbestrol surface molecularly imprinted polymer has been applied to concentrating diethylstilbestrol in pond water and fish samples. A corresponding analytical method to determine diethylstilbestrol has been developed. The limit of detection for diethylstilbestrol in pond water sample and fish samples were 3 μg L⁻¹ and 15 μg kg⁻¹.     

Poly(ammonium/ pyridinium)-chitosan Schiff base as a smart biosorbent for scavenging of Cu2+ ions from aqueous effluents

Chitosan Schiff bases (CSBs) decorated with ammonium or pyridinium motifs for recyclable biosorption of Cu²⁺ ions from aqueous effluents were tailored by grafting of salicylaldehyde ionic liquids (Sal-ILs) onto chitosan surface. Biosorption capacity of poly(ionic-salicylidene) CSBs (PISCSB_1,2) was compared with chitosan and poly(neural-salicylidene) CSBs (PSCSB). The ionic salicylidene-functionalized chitosan, poly(pyridinium)-salicylidene chitosan Schiff base (PISCSB₂), exhibited excellent adsorption capacity (99.1%), in comparison to chitosan (85%) and PSCSB (95%). Biosorption of Cu²⁺ ions onto PSCSB followed pseudo-first-order kinetic model while onto chitosan (CS) and PISCSB_1,2 followed pseudo-second-order kinetic model. However, Cu²⁺ ions biosorption onto all biosorbents fitted Langmuir adsorption isotherm model. Negative values of ΔG^o and ΔH^o confirmed the spontaneity and exothermic behavior of adsorption process. The new biosorbents could be successfully regenerated in aqueous 0.01 M EDTA solution with negligible loss in their adsorption capacity. Consequently, our new chitosan-based biosorbents may offer promising green and renewable scavengers for Cu²⁺ ions from wastewater.     

Synthesis and Chelating Properties of Polystyrene Supported Schiff Base (N,N′-disalicylidenepropylenetriamine) Resin Toward Some Divalent Metal Ions

A new polystyrene-supported Schiff base resin, N,N-bis(salicylidenepropylenetriamine)- aminomethyl polystyrene, has been synthesized through a reaction between the commercially available 4-chloromethyl polystyrene polymer and the Schiff base, N,N′-disalicylidenepropylenetriamine. The chelation behavior of this resin toward the divalent metal ions Cu^{2 +}, Ni^{2 +}, Zn^{2 +}, and Pb^{2 +} in aqueous solutions was investigated. Batch equilibration experiments were carried out as a function of contact time, pH, amount of metal-ion, polymer mass, and temperature. The amount of metal-ion uptake of the polymers was determined by using atomic absorption spectrometry (AAS). Results of the study revealed that the resin exhibited higher capacities and a more pronounced adsorption toward Cu^{2 +} and that the metal-ion uptake follows the order: Cu^{2 +} > Zn ^{2 +} > Ni^{2 +} > Pb²⁺. The adsorption and binding capacity of the resin toward the various metal ions investigated are discussed.     

The development of a method for the qualitative and quantitative determination of petroleum hydrocarbon components using thin-layer chromatography with flame ionization detection

An analytical scheme to determine groups of petroleum hydrocarbon compounds in crude oil was developed and used for the qualitative and quantitative characterization of crude oil samples from the Shengli oilfield, the second largest oilfield in China. Crude oil samples were fractionated and analyzed by thin-layer chromatography with flame ionization detection (TLC-FID). Relative standard deviation (RSD) values for retention time, peak height and half peak width were less than 5.2% for all classes of compounds, based on nine independent replicates. The crude oil light fraction was further analyzed by GC–MS and the majority of identified compounds were methyl- or hydro-derivatives of long-chain hydrocarbons and aromatic compounds. The external standard method used in the present study can lower detection limits of petroleum hydrocarbon compound classes to 20.0 mg L⁻¹, and the crude oil concentration in the range of 30 and 35,000 mg L⁻¹ has a high linear correlation (r² > 0.97, P < 0.05) with peak area. A comparison between elution chromatography (EC) and TLC-FID regarding the recovery of petroleum hydrocarbon compounds was carried out with aged crude oil contaminated soils of 50, 80, 200 and 300 mg g⁻¹. The tested TLC-FID method showed a 10% higher recovery for total extractable materials than the reference EC method. The calibration factor was fraction-dependent and varied with the recovery rate of TLC/EC. Regarding the tested extraction procedures, accelerated solvent extraction (ASE) had a higher extraction efficiency for crude oil contaminated soils than Soxhlet and ultrasonic extractions.     

DAPPA grafted polymer: an efficient solid phase extractant for U(VI), Th(IV) and La(III) from acidic waste streams and environmental samples

A new class of polymeric resin has been synthesized by grafting Merrifield chloromethylated resin with (dimethyl amino-phosphono-methyl)-phosphonic acid (MCM-DAPPA), for the preconcentration of U(VI), Th(IV) and La(III) from both acidic wastes and environmental samples. The various chemical modification steps involved during grafting process are characterized by FT-IR spectroscopy, ³¹P and ¹³C-CPMAS (cross-polarized magic angle spin) NMR spectroscopy and CHNS/O elemental analysis. The water regain capacity data for the grafted polymer are obtained from thermo-gravimetric (TG) analysis. The influence of various physico-chemical parameters during the quantitative extraction of metal ions by the resin phase are studied and optimized by both static and dynamic methods. The significant feature of this grafted polymer is its ability to extract both actinides and lanthanides from high-level acidities as well as from near neutral conditions. The resin shows very high sorption capacity values of 2.02, 0.89 and 0.54 mmol g⁻¹ for U(VI), 1.98, 0.63 and 0.42 mmol g⁻¹ for Th(IV) and 1.22, 0.39 and 0.39 mmol g⁻¹ for La(III) under optimum pH, HNO₃ and HCl concentration, respectively. The grafted polymer shows faster phase exchange kinetics (<5 min is sufficient for 50% extraction) and greater preconcentration ability, with reusability exceeding 20 cycles. During desorption process, all the analyte ions are quantitatively eluted from the resin phase with >99.5% recovery using 1 M (NH₄)₂CO₃, as eluent. The developed grafted resin has been successfully applied in extracting Th(IV) from high matrix monazite sand, U(VI) from sea water and also U(VI) and Th(IV) from simulated nuclear spent fuel mixtures. The analytical data obtained from triplicate measurements are within 3.9% R.S.D. reflecting the reproducibility and reliability of the developed method.     

Inhibitory study of some novel Schiff base derivatives on Staphylococcus aureus by microcalorimetry

The effect of a series of novel Schiff base compounds on Staphylococcus aureus was studied by microcalorimetric method at 37 °C The results showed that all of the organic compounds had the capacity to inhibit the growth of S. aureus in different extent. And the extent and duration of the inhibitory effect on the growth of S. aureus, judged from the rate constant (k), varied with the different structure of the Schiff base compounds. According to the power-time curves, the multiplication rate constant and inhibition ratio were calculated. The growth rate constant of S. aureus (in log phase) in the presence of Schiff base compounds decreased with the increasing of the concentrations of these compounds regularly. The experimental results revealed that the hydrophilicity of Schiff bases had a great influence on their antibacterial activity. Of these Schiff bases, the greater their hydrophilicity, the higher their antibacterial activity. The antibacterial structure-activity relationship (SAR) of Schiff base derivatives was also briefly discussed.     

Electrothermal atomic absorption spectrometric determination of arsenic in essential lavender and rose oils

Analytical procedures for electrothermal atomic absorption spectrometric (ETAAS) determination of arsenic in essential oils from lavender (Lavendula angustifolia) and rose (Rosa damascena) are described. For direct ETAAS analysis, oil samples are diluted with ethanol or i-propanol for lavender and rose oil, respectively. Leveling off responses of four different arsenic species (arsenite, arsenate, monomethylarsonate and dimethylarsinate) is achieved by using a composite chemical modifier: l-cysteine (0.05 g l⁻¹) in combination with palladium (2.5 μg) and citric acid (100 μg). Transverse-heated graphite atomizer (THGA) with longitudinal Zeeman-effect background correction and ‘end-capped’ graphite tubes with integrated pyrolytic graphite platforms, pre-treated with Zr-Ir for permanent modification are employed as most appropriate atomizer. Calibration with solvent-matched standard solutions of As(III) is used for four- and five-fold diluted samples of lavender and rose oil, respectively. Lower dilution factors required standard addition calibration by using aqueous (for lavender oil) or i-propanol (for rose oil) solutions of As(III). The limits of detection (LOD) for the whole analytical procedure are 4.4 and 4.7 ng g⁻¹ As in levender and rose oil, respectively. The relative standard deviation (R.S.D.) for As at 6-30 ng g⁻¹ levels is between 8 and 17% for both oils. As an alternative, procedure based on low temperature plasma ashing in oxygen with ETAAS, providing LODs of 2.5 and 2.7 ng g⁻¹ As in levender and rose oil, respectively, and R.S.D. within 8-12% for both oils has been elaborated. Results obtained by both procedures are in good agreement.     

Miktoarms hyperbranched polymer brushes: One-step fast synthesis by parallel click chemistry and hierarchical self-assembly

Spherical molecular brushes with amphiphilic heteroarms were facilely synthesized by grafting the arms of hydrophobic 2-azidoethyle palmitate and hydrophilic monoazide-terminated poly(ethylene glycol) onto the core of alkyne-modified hyperbranched polyglycerol (HPG) with high molecular weight (M _n = 122 kDa) via one-pot parallel click chemistry. The parallel click grafting strategy was demonstrated to be highly efficient (～100%), very fast (～ 2 h) and well controllable to the amphilicity of molecular brushes. Through adjusting the feeding ratio of hydrophobic and hydrophilic arms, a series of brushes with different arm ratios were readily obtained. The resulting miktoarms hyperbranched polymer brushes (HPG-g-C16/PEG350) were characterized by hydrogen-nuclear magnetic resonance (¹H NMR), Fourier transform infrared (FT-IR) spectroscopy, gel permeation chromatography (GPC), and differential scanning calorimetry (DSC) measurements. The spherical molecular brushes showed high molecular weights up to 230 kDa, and thus could be visualized by atomic force microscopy (AFM). AFM and dynamic laser light scattering (DLS) were employed to investigate the self-assembly properties of amphiphilic molecular brushes with closed proportion of hydrophobic and hydrophilic arms. The brushes could self-assemble hierarchically into spherical micelles, and network-like fibre structures, and again spherical micelles by addition of n-hexane into the dichloromethane or chloroform solution of brushes. In addition, this kind of miktoarms polymer brush also showed the ability of dye loading via host-guest encapsulation, which promises the potential application of spherical molecular brushes in supramolecular chemistry.     

Grafting of poly[1-(N,N-bis-carboxymethyl)amino-3-allylglycerol-co-dimethylacrylamide] copolymer onto siliceous support for preconcentration and determination of lead (II) in human plasma and environmental samples

A method is reported for surface grafting of polymer containing a functional monomer for metal chelating, poly[1-(N,N-bis-carboxymethyl)amino-3-allylglycerol-co-dimethylacrylamide] (poly(AGE/IDA-co-DMAA) onto silica modified by silylation with 3-mercaptopropyltrimethoxysilane. Monomer 1-(N,N-bis-carboxymethyl)amino-3-allylglycerol (AGE/IDA) was synthesized by reaction of allyl glycidyl ether with iminodiacetic acid. The resulting sorbent has been characterized using FT-IR, elemental analysis, thermogravimetric analysis (TGA), FT-Raman and scanning electron microscopy (SEM) and evaluated for the preconcentration and determination of trace Pb(II) in human biological fluid and environmental water samples. The optimum pH value for sorption of the metal ion was 5.5. The sorption capacity of functionalized resin was 15.06 mg g⁻¹. The chelating sorbent can be reused for 15 cycles of sorption–desorption without any significant change in sorption capacity. A recovery of 96.2% was obtained for the metal ion with 0.5 M nitric acid as eluting agent. The profile of lead uptake by the sorbent reflects good accessibility of the chelating sites in the poly(AGE/IDA-co-DMAA)-grafted silica gel. Scatchard analysis revealed that the homogeneous binding sites were formed in the polymers. The equilibrium adsorption data of Pb(II) by modified resin were analyzed by Langmuir, Freundlich, Temkin and Redlich–Peterson models. On the basis of equilibrium adsorption data the Langmuir, Freundlich and Temkin constants were determined as 0.70, 1.35 and 2.7, respectively at pH 5.5 and 20 °C. Isotherms have also been used to obtain the thermodynamic parameters such as free energy, enthalpy and entropy of adsorption.     

Highly ordered Ti-SBA-15: Efficient H2 adsorbent and photocatalyst for eco-toxic dye degradation

Highly ordered 2D-hexagonal mesoporous titanium silicate Ti-SBA-15 materials (space group p6mm) have been synthesized hydrothermally in acidic medium employing amphiphilic tri-block copolymer, Pluronic F127 as structure directing agent. Samples are characterized by powder X-ray diffraction, transmission electron microscopy, scanning electron microscopy, FT IR spectroscopy, UV-visible diffuse reflectance measurements, N₂ adsorption/desorption and TG-DTA analysis. XRD and TEM results suggested the presence of highly ordered mesophase with hexagonal pore arrangements. BET surface area for Ti-SBA-15 (924 m² g⁻¹) is considerably higher than the pure silica SBA-15 (611 m² g⁻¹) prepared following the same synthetic route. UV-visible and FT-IR studies suggested the incorporation of mostly tetrahedral titanium (IV) species, along with some six-coordinated sites in the silicate network. This material shows very good H₂ adsorption capacity at higher pressure and excellent catalytic activity in the photocatalytic degradation of ecologically abundant dye methylene blue.     

Isotherms,kinetics, and thermodynamics of boron adsorption on fibrous polymeric chelator containing glycidol moiety optimized with response surface method

A fibrous boron chelator containing glycidol moiety (PE/PP-g-PVAm-G) was prepared by radiation induced grafting of N-vinylformamide (NVF) onto polyethylene/polypropylene (PE/PP) non-woven sheet followed by hydrolysis and immobilization of glycidol moiety. The glycidol density was controlled by optimization of the reaction parameters using the Box-Behnken design of response surface methodology (RSM). The properties of the PE/PP-g-PVAm-G were evaluated using Fourier transform infrared (FTIR) spectroscopy, field emission scanning electron microscopy (FESEM) and energy dispersive x-ray (EDX) analysis, X-ray diffraction (XRD) and thermal gravimetric analysis (TGA). A maximum glycidol density yield of 5.0 mmol·g⁻¹ was obtained with 11.8 vol%, 78.9 °C and 109.4 min for glycidol concentration, reaction temperature and time, respectively. The isotherms, kinetics, and thermodynamic behavior of boron adsorption on the optimized chelator were investigated. The boron adsorption was pH-dependent and attained a maximum adsorption capacity of 25.7 mg·g⁻¹. The equilibrium isotherm proceeded by Redlich–Peterson model whereas the kinetics was best expressed by the pseudo-second-order equation. The thermodynamic analysis revealed that boron adsorption is endothermic and spontaneous. The fibrous chelator demonstrated high boron selectivity and strong resistance to foreign ions with uncompromised regeneration efficiency after five adsorption/desorption cycles. The PE/PP-g-PVAm-G chelator seems to be very promising for boron removal from aqueous media.     

Porphyrin–Schiff Base Conjugates Bearing Basic Amino Groups as Antimicrobial Phototherapeutic Agents

New porphyrin–Schiff base conjugates bearing one (6) and two (7) basic amino groups were synthesized by condensation between tetrapyrrolic macrocycle-containing amine functions and 4-(3-(N,N-dimethylamino)propoxy)benzaldehyde. This approach allowed us to easily obtain porphyrins substituted by positive charge precursor groups in aqueous media. These compounds showed the typical Soret and four Q absorption bands with red fluorescence emission (Φ_F ~ 0.12) in N,N-dimethylformamide. Porphyrins 6 and 7 photosensitized the generation of O₂(¹Δ_g) (Φ_Δ ~ 0.44) and the photo-oxidation of L-tryptophan. The decomposition of this amino acid was mainly mediated by a type II photoprocess. Moreover, the addition of KI strongly quenched the photodynamic action through a reaction with O₂(¹Δ_g) to produce iodine. The photodynamic inactivation capacity induced by porphyrins 6 and 7 was evaluated in Staphylococcus aureus, Escherichia coli, and Candida albicans. Furthermore, the photoinactivation of these microorganisms was improved using potentiation with iodide anions. These porphyrins containing basic aliphatic amino groups can be protonated in biological systems, which provides an amphiphilic character to the tetrapyrrolic macrocycle. This effect allows one to increase the interaction with the cell wall, thus improving photocytotoxic activity against microorganisms.     

Removal of Oil Spills from Salty Waters by Commercial Organoclays

In this study two commercial organoclays, Cloisite 15A and Cloisite 30B, were used to investigate their potential for removing of light and heavy crude oils from salty waters. The results of batch kinetic studies indicated that the equilibrium time can be reached within 25–30 minutes of contact time. In addition experiments were performed to determine the effect of salinity, temperature, pH and mixing time on the adsorption process. The adsorption isotherms were obtained for the crude oils at equilibrium, at an optimum pH value of 11.73 and temperature of 19°C for which the initial oil contents varied in the range of 100 to 2000 ppm. Experimental results showed that oil sorption onto these organoclays can be described by Freundlich isotherm. Further, it was found that the oil removal efficiency for Cloisite 30B is higher than that of Cloisite 15A and the greater sorption was observed for Gachsaran crude oil onto the organoclays over Soroosh crude oil.     

A mild method of amine-type adsorbents syntheses with emulsion graft polymerization of glycidyl methacrylate on polyethylene non-woven fabric by pre-irradiation

A mild pre-irradiation method was used to graft glycidyl methacrylate (GMA) onto polyethylene (PE) non-woven fabric (NF). The polymer was irradiated by electron beam in air atmosphere at room temperature. The degree of grafting (D_g) was determined as a function of reaction time, absorbed dose, monomer concentration and temperature. After 30 kGy irradiation, with 5% GMA, surfactant Tween 20 (Tw-20) of 0.5% at 55 °C for 15 min, the trunk polymer was made grafted with a D_g of 150%. Selected PE-g-PGMA of different D_g was modified with aminated compounds such as ethylenediamine (EDA), diethylenetriamine (DETA), triethylenetetramine (TETA) and tetraethylenepentamine (TEPA). The obtained amine-type adsorbents were prepared to remove copper and uranium ions from solution. It was shown that at least 90% of copper and 60% of uranium with the initial concentration from 3 to 1000 ppb can be removed from water.     

Electrochemical sensor for predicting transformer overload by phenol measurement

Transformer overload is a significant problem to the power transmission industry, with severe safety and cost implications. Overload may be predicted by measuring phenol levels in the transformer-insulating oil, arising from the thermolytic degradation of phenol-formaldehyde resins. The development of two polyphenol oxidase (PPO) sensors, based on monitoring the enzymatic consumption of oxygen using an oxygen electrode, or reduction of enzymatically generated o-quinone at a screen-printed electrode (SPE), for the measurement of phenol in transformer oil is reported. Ex-service oils were prepared either by extraction into aqueous electrolyte-buffer, or by direct dilution in propan-2-ol, the latter method being more amenable to simple at-line operation. The oxygen electrode, with a sensitivity of 2.87 nA μg⁻¹ ml⁻¹, RSD of 7.0-19.9% and accuracy of ±8.3% versus the industry standard International Electrotechnical Commission (IEC) method, proved superior to the SPE (sensitivity: 3.02 nA μg⁻¹ ml⁻¹; RSD: 8.9-18.3%; accuracy: ±7.9%) and was considerably more accurate at low phenol concentrations. However, the SPE approach is more amenable to field-based usage for reasons of device simplicity. The method has potential as a rapid and simple screening tool for the at-site monitoring of phenol in transformer oils, thereby reducing incidences of transformer failure.     

Corrosion inhibition studies on mild steel in HCl by a newly synthesized benzil monohydrazone based Schiff base

The corrosion inhibition effect of newly formulated Schiff base 2-((E)-((E)-2-hydrazone-1, 2-diphenylethylidene) amino phenol) (HDAP) ligand L derived from Benzil monohydrazone and 2-Aminophenol on mild steel in 1 ​M HCl was examined. Electrochemical (Tafel and EIS) and mass loss techniques were employed to evaluate its corrosion protection efficiency. The inhibition efficiency (η %) was elevated with raise in concentration of compound L.Maximum inhibition efficiency of 94.18% was obtained at 0.01 ​M concentration of HDAP from Tafel polarisation curve. From electrochemical impedance (EIS) studies, it was confirmed that increase in concentration of HDAP led to enhancement of the charge transfer resistance. Both physical and chemical types of adsorptions were observed for the Schiff base via π-bonding electrons which obey Langmuir adsorption isotherm. The SEM picture revealed development of a thin layer on metallic surface. Quantum chemical evaluations were conducted to find out the mechanism of corrosion retardation power of HDAP.     

Diffusion-averaged molecular weights of «nonboiling» crude oil fractions

Summary The successful application of the formerly presented concept of diffusion-averaged molecular weight, M_d, to vacuum residues of crude oils, or their fractions, is described. The samples for establishing the calibration curve, logDvs. logM, were crude oil fractions with polydispersities smaller than 1.1. In a surprisingly good approximation the calibration curve is independent of the origin of these fractions if 500<M<10000. The validity of our calibration curve was demonstrated with more than 10 crude oil residues and with some of their hydrogenation residues [2].     

Chitosan-Based Surface Molecularly Imprinted Polymer Microspheres for Sustained Release of Sinomenine Hydrochloride in Aqueous Media

The surface molecular imprinting technique has been proposed as a prospective strategy for template molecule recognition and separation by devising the recognition sites on the surface of imprinted materials. The purpose of this study was to establish a novel drug delivery system which was developed by surface molecular imprinting method using β-cyclodextrin (β-CD)-grafted chitosan (CS) (CS-g-β-CD) microspheres as matrix and sinomenine hydrochloride (SM) as the template molecule. By adjusting the amount of functional monomer and cross-linking agent, we got the more excellent adsorption of CS-g-β-CD molecularly imprinted polymers (MIPs-CS-g-β-CD). When the amount of functional monomer was 6 mmol and cross-linking agent was 20 mmol, the maximum binding capacity of MIPs and non-imprinted polymers (NIPs) was 55.9 mg/g and 37.2 mg/g, respectively. The results indicated that the recognition of SM with MIPs was superior to NIPs. The adsorption isotherms of MIPs-CS-g-β-CD indicated that the adsorption behavior fitted better to the Langmuir model, which showed that the adsorption process of polymer was monomolecular layer. In in vitro drug release studies, the accumulative release amount of MIPs-CS-g-β-CD was up to 78% within 24 h. MIPs exhibited an excellent controlled SM release profile without burst release and the mechanism of SM release was shown to conform to non-Fick diffusion. Therefore, MIPs-CS-g-β-CD were successfully applied to extraction of SM and used as the materials for drug delivery system.