Atom transfer radical polymerization of n‐butyl methacrylate in an aqueous dispersed system: A miniemulsion approach

Ultrasonication was applied in combination with a hydrophobe for the copper‐mediated atom transfer radical polymerization of n‐butyl methacrylate in an aqueous dispersed system. A controlled polymerization was successfully achieved, as demonstrated by a linear correlation between the molecular weights and the monomer conversion. The polydispersities of the polymers were small (weight‐average molecular weight/number‐average molecular weight < 1.5). The influence of several factors, including ultrasonication, the amount of the surfactant, and the nature of the initiator, on the polymerization kinetics, molecular weight, and particle size was studied. The polymerization rate and molecular weights were independent of the number of particles and only depended on the atom transfer equilibrium. The final particle size, however, was a function of all the parameters. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 4724–4734, 2000     

Atom transfer radical polymerization through N‐chlorosulfonamides

Controlled polymerizations of vinyl monomers such as methyl methacrylate and styrene are achieved using N‐chloro,N‐propyl‐p‐toluenesulfonamide (NCPT) together with a cuprous bromide/hexahexyl triethylenetetramine (CuBr/H‐TETA) complex. Although N‐halosulfonamides are known to decompose radically to give free chlorine, NCPT alone (without a cuprous complex) does not initiate any polymerization even in prolonged reaction times. Instead these add to the double bonds to give 2‐chloroethylsulfonamides. In the present polymerization system a good chlorine donator (NCPT) is combined with an organic soluble complex (CuBr/H‐TETA) to perform atom transfer radical polymerizations (ATRPs) in homogenous conditions. The linear proportionality of the molecular weights to the conversions and straight lines observed in ln(M₀/M) (where M₀ and M are the monomer contents at the beginning and at any time, respectively) versus time plots indicate typical controlled polymerization characteristics. The use of freshly prepared NCPT is advisable due to its slow and spontaneous decomposition when standing at room temperatures. Because of their easy preparation, N‐chlorosulfonamides can be used and are preferred instead of special halogen compounds commonly used in copper mediated ATRP. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 2691–2695, 2001     

Atom transfer radical polymerization from cellulose fibers at ambient temperature

Cellulose fibers have been successfully grafted with poly(methyl acrylate) using atom transfer radical polymerization, mediated by Me6-TREN and Cu(I)Br at ambient temperature. The initially hydrophilic cellulose was first modified by reacting the hydrozyl groups with 2-bromoisobutyryl bromide whereupon methyl acrylate was grafted from the surface. The resulting polymer-grafted papers were extremely hydrophobic, thetaa = 133 degrees . FT-IR analysis indicates that the amount of grafted polymer can be controlled by adding sacrificial initiator to the polymerizing system. Size exclusion chromatography of the bulk polymer revealed narrow polydispersities and a molecular weight corresponding to the ratio [M]:[I].     

Atom transfer radical polymerization of styrene under pulsed microwave irradiation

A homogeneous solution atom transfer radical polymerization (ATRP) and reverse atom transfer radical polymerization (RATRP) of styrene (St) in N,N-dimethylformamide (DMF) were successfully carried out under pulsed microwave irradiation (PMI), using 1-bromo-1-phenylethane (1-PEBr)/CuCl/N,N,N′,N′′,N′′-pentamethyldiethylenetriamine (PMDETA) as an initiating system at 85°C and 2,2′-azo-bis-isobutyrontrile (AIBN)/CuCl₂/PMDETA as an initiating system at 95°C, respectively. The polymerization rates under PMI were greatly increased in comparison with those under identical conventional heating (CH).     

Atom transfer radical polymerization of 1-phenoxycarbonyl ethyl methacrylate monomer

Atom transfer radical polymerization conditions with copper(I) bromide/2,2^′-bipyridine (Cu/2,2^′-bpy) as the catalyst system were employed for the homopolymerization and random copolymerization of 1-phenoxycarbonyl ethyl methacrylate (PCMA) with methyl methacrylate (MMA). Temperature studies indicated that the polymerizations occurred smoothly in bulk at 110 °C. Poly(PCMA)(polydispersity index=1.27) homopolymer was characterized and then used as macroinitiator for increasing its molecular weight. The homopolymerization of PCMA was also carried out under free radical conditions using 2,2^′-azobisisobutyronitrile as an initiator.The monomer and polymers were characterized by FT-IR and ¹H and ¹³C-NMR techniques. The glass transition temperatures, the solubility parameters and average-molecular weights of the polymers were determined. Thermal stabilities of the polymers were given as compared with each other by using TGA curves. Thermal degradation products of poly(PCMA)s obtained by ATRP and free radical polymerization were compared with each other by using ¹H-NMR technique.     

微波辐射下甲基丙烯酸正丁酯原子转移自由基聚合

原子转移自由基聚合(Atom transfer radical polymerization,ATRP)与其他活性聚合方法相比,具有适用单体广、反应条件温和。但其催化体系活性不高,聚合温度较高,数均分子量不高。     

Atom transfer radical polymerization of styrene in toluene/water mixtures

The atom transfer radical polymerization (ATRP) of styrene in water/toluene mixtures was studied. A linear dependence of the molecular weight on conversion was observed, but the initiation efficiency decreased when the catalyst concentration increased. The variation of the amount of water in the system affected the control of the ATRP, indicating that the presence of the aqueous phase influenced the concentration of copper halides in the organic phase. The partitioning of copper halides resulted in almost complete migration of Cu^II into the aqueous phase, which assisted with catalyst removal after polymerization. For example, the amount of residual copper in the organic phase determined by inductively coupled plasma was less than 1 ppm when the polymerization mixture was exposed to air for 30 min. The ATRP of styrene in water/toluene mixtures occurred with the preservation of Br at the polymer chain end, as confirmed by successful block copolymerization. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3153–3160, 2002     

Atom transfer radical polymerization of styrene initiated by triphenylmethyl chloride

Triphenylmethyl chloride (TPMCl) was employed for the first time as the initiator of atom transfer radical polymerization (ATRP) of styrene in the presence of CuCl/N,N,N′,N″,N″-pentamethyldiethylenetriamine (PMDETA) as catalyst and cyclohexanone as solvent. The kinetic plot was first-order with respect to monomer. A linear increase of number average molecular weight (M_n) vs. monomer conversion was observed, and the molecular weight distribution (MWD) was relatively narrow (M_w/M_n = 1.2-1.5). ¹H NMR spectra revealed the ω-Cl group at the chain end. Another two initiators, benzyl chloride (BzCl) and diphenylmethyl chloride (DPMCl), were also employed in contrast with triphenylmethyl chloride to investigate the influence of phenyl numbers on the polymerization.     

Atom transfer radical polymerization initiated by N‐bromosuccinimide

N‐Bromosuccinimide (NBS) was used as the initiator in the atom transfer radical polymerizations of styrene (St) and methyl methacrylate (MMA). The NBS/CuBr/bipyridine (bpy) system shows good controllability for both polymerizations and yields polymers with polydispersity indexes ranging from 1.18 to 1.25 for St and 1.14 to 1.41 for MMA, depending on the conditions used. The end‐group analysis of poly(MMA) and polystyrene indicated the polymerization is initiated by the succinimidyl radicals formed from the redox reaction of NBS with CuBr/bpy. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5811–5816, 2004     

Synthesis of amino acid-based polymers via atom transfer radical polymerization in aqueous media at ambient temperature

Well-defined acryloyl beta-alanine (ABA) polymers were synthesized directly via atom transfer radical polymerization (ATRP) under near physiological conditions using various water soluble initiators with high yield and narrow molecular weight distributions.     

Atom transfer radical polymerization of cyclohexyl methacrylate at a low temperature

The atom transfer radical polymerization of cyclohexyl methacrylate (CHMA) is reported. Controlled polymerizations were performed with the CuBr/N,N,N′,N″,N″‐pentamethyldiethylenetriamine catalytic system with ethyl 2‐bromoisobutyrate as the initiator in bulk and different solvents (25 vol %) at 40 °C. The polymerization of CHMA in bulk resulted in a controlled polymerization, although the concentration of active species was relatively elevated. The addition of a solvent was necessary to reduce the polymerization rate, which was dependent on the dipole moment. Well‐controlled polymers were obtained in toluene, diphenyl ether, and benzonitrile solutions. Poly(cyclohexyl methacrylate) as a macroinitiator was used to synthesize the poly(cyclohexyl methacrylate)‐b‐poly(tert‐butyl methacrylate) block copolymer, which allowed a demonstration of its living character. In addition, two difunctional initiators, 1,4‐bis(bromoisobutyryloxy) benzene and 1,2‐bis(bromoisobutyryloxy) ethane, were used to initiate the atom transfer radical polymerization of CHMA. The experimental molecular weights of the obtained polymers were very close to the theoretical ones. These, along with the relative narrow molecular weight distributions, indicated that the polymerization was living and controlled. For confirmation, two different poly(tert‐butyl methacrylate)‐b‐poly(cyclohexyl methacrylate)‐b‐poly(tert‐butyl methacrylate) triblock copolymers were also synthesized. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 71–77, 2005     

Atom transfer radical polymerization of vinyl monomers in the presence of tetraethylthiuram disulfide

In situ ATRPs of MMA, St in the presence of TD catalyzed by FeCl₃/PPh₃ and CuBr₂/bpy have been studied, respectively. The results showed that the initiator Et₂NCS₂X (X = Cl or Br) and catalyst FeCl₂ or CuBr were formed in situ from the initiating components and the polymerization exhibited living radical polymerization characteristics. In the case of St polymerization with TD/CuBr/bpy initiating system, an inverse ATRP was observed.     

Atom transfer radical polymerization of methyl methacrylate catalyzed by cobalt catalyst system

A new catalyst system, CoCl₂/tris(2‐(dimethyl amino) ethyl)amine (Me₆ TREN), was used to catalyze the polymerization of methyl methacrylate (MMA) successfully through atom transfer radical polymerization mechanism. The control over the polymerization was not ideal, the molecular weight distribution of the resulting polymer (PMMA) was relatively broad (M_w/M_n = 1.63–1.80). To improve its controllability, a small amount of hybrid deactivator (FeBr₃/Me₆TREN or CuBr₂/Me₆TREN) was added in the cobalt catalyst system. The results showed that the level of control over the polymerization was significantly improved with the hybrid cobalt–iron (or cobalt–copper) catalyst system; the polydispersity index of the resulting polymer was reduced to a low level (M_w/M_n = 1.15–1.46). Furthermore, with the hybrid cobalt–iron catalyst, the dependence of the propagation rate on the temperature and the copolymerization of methacrylate (MA) with PMMA‐Br as macroinitiator were also investigated. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 5207–5216, 2005     

Atom transfer radical polymerization of n-octyl acrylate under microwave irradiation

The atom transfer radical polymerization (ATRP) of n-octyl acrylate (OA) was successfully carried out using ethyl-2-bromobutyrate as an initiator, and CuBr/2,2^′-bipyridine (bpy) as a catalyst under microwave irradiation (MI) at 76.8 °C. The polymerization of n-octyl acrylate under MI showed linear first-order rate plots, a linear increase of the number-average molecular weight M_n with conversion, and low polydispersities, 1.1<M_w/M_n<1.4, where M_w is weight-average molecular weight. The ATRP of n-octyl acrylate is well controlled. Under the same experimental conditions, the apparent rate constant, k_p^app, under MI is larger apparently than that under conventional heating. In addition, the effects of concentration of catalyst and other factors on polymerization are reported.