Studies of chemisorbed tetracene on si(111)-7x7

The chemisorption of tetracene on the Si(111)-7x7 surface was studied using scanning tunneling microscopy (STM) and density functional theory (DFT) calculations. On the basis of the STM results and dimension analysis, two types of binding configurations were proposed. One of the configurations involves the di-sigma reaction between two C atoms of an inner ring with an adatom-rest atom pair on the substrate to give rise to an unsymmetrical butterfly structure. Tetracene in another configuration possesses four C-Si bonds that are formed via di-sigma reactions between the C atoms at the terminal rings with two center adatom-rest atom pairs within one-half of the surface unit cell. Besides, two other binding modes were proposed based on the dimension compatibility between the tetracene C and the substrate Si dangling bonds even though their identifications through the STM images are nonexclusive. Structural modeling and adsorption energies calculations were carried out using the DFT method. Factors affecting the relative thermodynamic stabilities based on the calculation results and the relative populations of tetracene in the different binding configurations as observed experimentally were discussed.     

Binding of glycine and L-cysteine on Si(111)-7 x 7

The adsorption of glycine and l-cysteine on Si(111)-7 x 7 was investigated using high-resolution electron energy loss spectroscopy (HREELS) and X-ray photoelectron spectroscopy (XPS). The observation of the characteristic vibrational modes and electronic structures of NH3+ and COO- groups for physisorbed glycine (l-cysteine) demonstrates the formation of zwitterionic species in multilayers. For chemisorbed molecules, the appearance of nu(Si-H), nu(Si-O), and nu(C=Omicron) and the absence of nu(O-H) clearly indicate that glycine and l-cysteine dissociate to produce monodentate carboxylate adducts on Si(111)-7 x 7. XPS results further verified the coexistence of two chemisorption states for each amino acid, corresponding to a Si-NH-CH2-COO-Si [Si-NHCH(CH2SH)COO-Si] species with new sigma-linkages of Si-N and Si-O, and a NH2-CH2-COO-Si [NH2CH(CH2SH)COO-Si] product through the cleavage of the O-H bond, respectively. Glycine/Si(111)-7 x 7 and l-cysteine/Si(111)-7 x 7 can be viewed as model systems for further modification of Si surfaces with biological molecules.     

Thermoresponsive copolymers of methacrylic acid and poly(ethylene glycol) methyl ether methacrylate

Copolymers of methacrylic acid (MAA) and poly(ethylene glycol) methyl ether methacrylate (PEGMA) were prepared and their cloud points in aqueous solution were studied as a function of comonomer ratio, solution pH, and presence of hydrophobic comonomers. Under acidic conditions, the cloud point falls below 0 °C for copolymers with between 25% to 60% ether content, because of the formation of hydrophobic H‐bonded ether–acid complexes. The cloud point also decreases with solution pH. For equivalent ether to acid ratios, the cloud point decreases with decreasing PEG chain length, because of the presence of a larger number of hydrophobic methyl and methacrylate groups. Similarly, the cloud point decreases upon incorporation of hydrophobic comonomers such as butyl, lauryl, or glycidyl methacrylates. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 6095–6104, 2005     

Attachment of styrene and phenylacetylene on Si(111)-7 x 7: the influence of substitution groups on the reaction mechanism and formation of pi-conjugated skeletons

The interactions of styrene and phenylacetylene and their isotope substitutions with a Si(111)-7 x 7 surface have been studied as model systems to mechanistically understand the chemical binding of conjugated pi-electron systems to di-radical-like silicon dangling bonds of the adjacent adatom-rest atom pair. Vibrational studies show that styrene mainly binds to the surface through a diradical reaction involving both the external C=C and its conjugated internal C=C of the phenyl ring with an adjacent adatom-rest atom pair, forming a 5-ethylidene-1,3-cyclohexadiene-like skeleton. On the other hand, phenylacetylene was shown to be covalently attached to Si(111)-7 x 7 through the external C[triple bond]C, forming a styrene-like conjugation system. These experimental results are consistent with density functional theory calculations. The different binding mechanisms for styrene and phenylacetylene clearly demonstrate that reaction channels for multifunctional organic molecules are strongly dependent on the chemical and physical properties of the functional groups. The resulting pi-electron conjugation structures may possibly be employed as intermediates for further organic syntheses and fabrication of multilayer organic films on semiconductor surfaces.     

Effect of introducing acrylic and methacrylic acid groups on molecular relaxation of poly(ethyl methacrylate)

Dielectric and infrared data have been obtained over a wide temperature range on copolymers of ethyl methacrylate with methacrylic and acrylic acid synthesized by radical copolymerization. The dissociation energy ΔH⁰ for the acid dimer in the copolymer is estimated from the temperature dependence of the relaxation strength Δε_α of the α relaxation, which is associated with the glass transition. The value of δH⁰ obtained by this method is in fair agreement with that determined by infrared (IR) spectroscopy. The strength of the α relaxation and its activation energy are both increased by the incorporation of methacrylic acid units but are decreased by acrylic acid units. This behavior is attributed to the restriction of main-chain motions by hydrogen-bonded acid dimers in the copolymers with methacrylic acid and to the incorporation of more flexible links in the copolymers with acrylic acid. The β relaxation observed below the glass transition temperatures is almost unaffected by the incorporation of methacrylic acid.     

Electron correlation effects at semiconductor surfaces and interfaces: Si(111)-5x5, Si(111)-7x7 and Sn/Ge(111)

Electron correlation effects associated with the dangling bond surface states of Si(111)-5×5, Si(111)-7×7 and Sn/Ge(111)-3×3 are analyzed. In all the cases, extensive LDA-calculations are performed and effective two-dimensional Hamiltonians are deduced. Our analysis of these Hamiltonians shows that: (a) the Si(111)-5×5 surface states exhibits a metal-insulator transition; (b) the Si(111)-7×7 surface shows important similarities with the Si(111)-5×5 case, but it has a dangling bond surface band having a metallic character; (c) finally, the Sn/Ge(111)-3×3 dangling bond surface bands also shows important correlation effects that are found, however, not to affect the metallic character of the surface bands.     

The effect of pH on charge, swelling and desorption of the dispersant poly(methacrylic acid) from poly(methyl methacrylate) microcapsules

Poly(methyl methacrylate) microcapsules have been prepared using the solvent evaporation technique with poly(methacrylic acid) (PMAA) as dispersant. The charge, swelling and desorption of PMAA from the microcapsules after treating the suspension with base have been followed using microelectrophoresis, X-ray photoelectron spectroscopy and quartz crystal microbalance with dissipation monitoring on model PMMA surfaces. Basic treatment of the microcapsule suspension leads to temporary colloidal stability through the introduction of charges on the PMAA chain. However, the increase in charge causes a continuous desorption of PMAA from the microcapsule surface, eventually leading to aggregation. If instead poly(diallyldimethylammonium chloride) is added to the base treated microcapsule suspension, good colloidal stability is obtained.     

Copolymerization of methacrylic acid with methyl methacrylate on a polyethylene glycol matrix

Copolymerization of methacrylic acid with [¹⁴C]-methyl methacrylate was carried out in the presence of polyethylene glycol (PEG) as a matrix. Composition and structure of complexes were determined using NMR techniques and radiometric measurements. It was found that the complexes consist of copolymer and PEG. Dependence of the composition of the copolymer on the composition of the initial mixture of monomers was examined. The reactivity ratios were calculated and compared with those for copolymerization without matrix. It was found that the influence of polyethylene glycol results in changing reactivity ratios of comonomers and kinetics of the process.     

ESR spectra of poly(methacrylic acid) and poly(methyl methacrylate): Reinterpretation of the 9-line spectrum

The temperature dependence of the ESR spectra of poly(methacrylic acid) and poly-(methyl methacrylate) γ-irradiated at room temperature was studied between ?196°C and +25°C. The conventional 9-line spectrum was observed throughout this range with no significant spectral change, in contrast to the propagating radical ··· CH₂? °C(CH₃)COOR found in methacrylic acid monomer or barium methacrylate dihydrate irradiated at ?196°C. In addition, the irradiation of methacrylic acid monomer with a low dose at 0°C gave the same 13-line spectrum as that of the propagating radical obtained by the irradiation at ?196°C, while prolonged irradiation at 0°C gave the same conventional 9-line spectrum as that of poly(methacrylic acid) or poly(methyl methacrylate). The conventional 9-line spectrum has a much weaker 4-line component than that of the propagating radical. The difference comes from the surrounding matrix, and the conventional 9-line spectrum is well interpreted by introducing the concept of the distribution of the conformational angle in the irregular polymer matrix. From simulation of the ESR spectrum, it was found that the intensity of the 4-line component is very sensitive to the distribution, and that the observed 9-line spectrum is well reproduced assuming a Gaussian distribution (half-height width of 5–6°) around the most probable conformation which is nearly the same as that of the propagating radical, where the conformational angles of the two C? H_β bonds to the half-filled p-orbital are 55° and 65°.     

Molecular anchor Cu-S formed on a thiophene mediated Si(111)-(7x7) surface

Thiophene molecule selectively binds to the adjacent adatom-rest atom pair on the Si(111)-(7x7) surface through its alpha-carbon atoms, leading to the covalent attachment of a C-S-C linkage and remaining C=C (beta-carbon) bond onto the surface. Photoemission studies show that Cu atom readily adsorbs onto the S atom of the functional group to form the Cu-S molecular anchor in two forms: one points away from the thiophene C=C group; the other points toward the C=C group.     

Binding of Cu(II) to poly(methacrylic acid)

The binding of Cu(II) ions to partly neutralized poly(methacrylic acid) (PMA) has been investigated by potentiometric titration and dialysis to determine the stoichiometry the Cu–PMA complexes formed. Partly ionized PMA was titrated with solutions of the metal ion to enable a large range of metal ion/polymer ratios to be studied. Combination of the results from these two techniques at ionic strength 0.1 indicates that at very low Cu(II)/polymer ratios, a 4:1 complex exists, but at higher ratios the complex breaks down to give a mainly 2:1 coordination with some 1:1 binding. Conductance titrations support these results. Viscometric titrations show strong interactions between the metal and polymer, preventing the full extension of the polyion at high degrees of ionization, and spectrophotometric titrations support the existence of at least two types of complexes in the solution.     

Secondary oxidation product on Si(111)-(7 x 7) characterized by isotope-labeled vibrational spectroscopy

The reaction of O(2) with Si(111)-(7 x 7) has been studied by electron energy-loss spectroscopy at 82 K. In addition to the losses due to Si-O-Si configurations, we observed two Si-O stretch modes depending on the coverage. A 146-meV peak appears at the initial reaction stage and was ascribed to a metastable product with one oxygen atom bonding on top of Si adatom and the other inserted into the backbond. The initial product is further oxidized to produce the second Si-O stretch peak at 150 meV. The secondary product was partially substituted with isotopes and analyzed with a simple model of coupled oscillators. The vibrational spectra reflect dynamical couplings between the isotopes, which is consistent with those predicted from the tetrahedral SiO(4) structure with one on top and three inserted oxygen atoms.     

Photon-stimulated desorption of F(-) ions from CF(3)Cl adsorbed on Si(111)-7x7

We report the photon-stimulated desorption of negative ions induced by direct dipolar dissociation and dissociative electron attachment. The photon-stimulated desorption of F(-) ions from CF(3)Cl physisorbed on a Si(111)-7x7 surface at 30 K in the photon energy range 12-35 eV was studied. The F(-) ion yield exhibits four resonances, at 12.8, 16.2, 19.5, and 22.3 eV, quite unlike the gas phase photodissociation cross section. The intensities of these resonances depend strongly on the CF(3)Cl coverage in a manner which varies from peak to peak. The resonances at 19.5 and 22.3 eV, which have a significant enhancement in the monolayer regime, are due to electron mediated dipolar dissociation of adsorbed CF(3)Cl molecules. The enhancement is attributed to surface electron attachment following molecular excitation. A significant enhancement in the monolayer regime has also been observed for the resonances at 12.8 and 16.2 eV. These two resonances are ascribable to a combination of electron mediated dipolar dissociation and dissociative electron attachment driven by photoelectrons generated in the neighboring molecules.     

Adsorption-induced desorption of benzene on Si(111)-7 x 7 by substrate-mediated electronic interactions

The process of benzene adsorption on an adjacent adatom-rest atom pair on Si(111)-7 x 7 at room temperature was studied using in-situ scanning tunneling microscopy (STM). Both adsorption and desorption of benzene were observed to take place mostly at adjacent sites during the process. DFT calculation results show that the bond length between the rest atom and the carbon atom in a pre-adsorbed benzene molecule increases due to the charge transfer from a neighboring rest atom in response to an approaching benzene molecule. Such increase in the bond length, when coupled resonantly to the C-Si thermal vibration, could result in bond breakage and desorption of the adsorbate. The studies provide evidence for the desorption of a chemisorbed benzene caused by an adsorbing benzene at a neighboring site through a substrate-mediated electronic interaction.     

Analytical strategy for the molecular weight determination of random copolymers of poly(methyl methacrylate) and poly(methacrylic acid)

Molecular weight characterization of random amphiphilic copolymers currently represents an analytical challenge. In particular, molecules composed of methacrylic acid (MAA) and methyl methacrylate (MMA) as the repeat units raise issues in commonly used techniques. The present study shows that when random copolymers cannot be properly ionized by MALDI, and hence detected and measured in MS, one possible analytical strategy is to transform them into homopolymers, which are more amenable to this ionization technique. Then, by combining the molecular weight of the so-obtained homopolymers, as measured by MS, with the relative molar proportion of the MMA and MMA units, as given by ¹H NMR spectrum, one can straightforwardly estimate the molecular weight of the initial copolymer. A methylation reaction was performed to transform MAA-MMA copolymer samples into PMMA homopolymers, using trimethylsilyldiazomethane as a derivatization agent. Weight average molecular weight (M _w) parameters of the MAA-MMA copolymers could then be derived from M _w values obtained for the methylated MAA-MMA molecules by MALDI, which were also validated by pulsed gradient spin echo (PGSE) NMR. An alkene function in one of the studied copolymer end-groups was also shown to react with the methylation agent, giving rise to MMA-like polymeric by-products characterized by tandem mass spectrometry and which could be avoided by adjusting the amount of the trimethylsilyldiazomethane in the reaction medium.     

Terpolymerization of methyl methacrylate, poly(ethylene glycol) methyl ether methacrylate or poly(ethylene glycol) ethyl ether methacrylate with methacrylic acid and sodium styrene sulfonate: determination of the reactivity ratios

Materials bearing ionic monomers were obtained through free radical terpolymerization of methyl methacrylate (MMA), poly(ethylene glycol) methyl ether methacrylate (PMEM) or poly(ethylene glycol) ethyl ether methacrylate (PEEM) with methacrylic acid (MA) and sodium styrene sulfonate (NaSS). The reactions were carried out in dimethyl sulfoxide using azobis(isobutyronitrile) as initiator. The reactivity ratios of the different couple of monomers were calculated according to the general copolymerization equation using the Finnemann-Ross, Kelen-Tüdos and Tidwell-Mortimer methods. The values of the reactivity ratios indicate that the different monomer units can be considered as randomly distributed along the chains for terpolymerizations of MMA, PMEM or PEEM with MA and NaSS. The average composition of the comonomers in the different terpolymers were calculated, showing a good agreement between the experimental and theoretical compositions. The instantaneous compositions are constant until about 70% of conversion. For higher conversions, the insertion of ionic monomers increases or decreases according to the system studied.     

Structural characterization of a poly(methacrylic acid)-poly(methyl methacrylate) copolymer by nuclear magnetic resonance and mass spectrometry

Mass spectrometry (MS) and nuclear magnetic resonance (NMR) have been combined to achieve the complete microstructural characterization of a poly(methacrylic acid)-poly(methyl methacrylate) (PMAA-PMMA) copolymer synthesized by nitroxide-mediated polymerization. Various PMAA-PMMA species could be identified which mainly differ in terms of terminaisons. ¹H and ¹³C NMR experiments revealed the structure of the end-groups as well as the proportion of each co-monomer in the copolymers. These end-group masses were further confirmed from m/z values of doubly charged copolymer anions detected in the single stage mass spectrum. In contrast, copolymer composition derived from MS data was not consistent with NMR results, obviously due to strong mass bias well known to occur during electrospray ionization of these polymeric species. Tandem mass spectrometry could reveal the random nature of the copolymer based on typical dissociation reactions, i.e., water elimination occurred from any two contiguous MAA units while MAA-MMA pairs gave rise to the loss of a methanol molecule. Polymer backbone cleavages were also observed to occur and gave low abundance fragment ions which allowed the structure of the initiating end-group to be confirmed.     

Dissociation of N2 on a Si(111)-7x7 Surface at Room Temperature

We demonstrate that the strong N₂ bond can be efficiently dissociated at low pressure and ambient temperature on a Si(111)-7x7 surface. The reaction was experimentally investigated by scanning tunnelling microscopy and X-ray photoemission spectroscopy. Experimental and density functional theory results suggest that relatively low thermal energy collision of N₂ with the surface can facilitate electron transfer from the Si(111)-7x7 surface to the π*-antibonding orbitals of N₂ that significantly weaken the N₂ bond. This activated N₂ triple bond dissociation on the surface leads to the formation of a Si₃N interface.     

Heat resistance and thermooxidative stability of copolymers of methyl methacrylate with methacrylic acid and methacrylamide

Effect of the composition of copolymers of methyl methacrylate with methacrylic acid and methacrylamide on their heat resistance and thermooxidative stability was studied.