Spontaneous vesicle formation of single chain and double chain cationic surfactant mixtures

The concentration vs composition diagram of aggregate formation of the dodecyltrimethylammonium bromide (DTAB) and didodecyldimethylammonium bromide (DDAB) mixture in aqueous solution at rather dilute region was constructed by analyzing the surface tension, turbidity, and electrical conductivity data and inspected by cryo-TEM images and dynamic light scattering data. Although the aqueous solution of DTAB forms only micelles, the transition from monomer to small aggregates and then to vesicle was found at 0.1 < X2 相似文献   

Aggregate Conformation and Rheological Properties of Didodecyldimethylammonium Bromide in Aqueous Solution

Aggregation behavior of didodecyldimethylammonium bromide (DDAB) in aqueous solution was investigated using negative-staining and freeze-fracture transmission electron microscopy (TEM) methods. With the concentration increase, the vesicle size enlarged from the range of 100–200 nm to 500–3000 nm and the structure transform from unilamella to multilamella. Rheological and viscosity measurement results indicated that the system exhibited a gel-like material characteristic and shearing thinning in property, as shown that the apparent viscosity decreased gradually during the shear rate ascended from 1 × 10^?4–1 × 10⁴ s^?1. Furthermore, the relationship between aggregate conformation and solution rheological properties was discussed.     

Aggregation phenomena on the ternary ionic-nonionic surfactant system: didodecyldimethylammonium bromide/octyl-beta-D-glucopyranoside/water. Mixed microaggregates, vesicles, and micelles

The formation of a variety of mixed colloidal aggregates has been investigated on a ternary ionic-nonionic system constituted by (i) a double-chain cationic surfactant with a 12-carbon atom hydrophobic tail, didodecyldimethylammonium bromide (di-C(12)DMAB), (ii) a nonionic single-chain surfactant, octyl-beta-D-glucopyranoside (OBG), and (iii) water. The study has been carried out by means of conductivity, zeta-potential, transmission electron microscopy (TEM), and cryogenic transmission electron microscopy (cryo-TEM) experiments on the highly diluted, very diluted, and moderately diluted regions. The formation of mixed microaggregates, prior to the appearance of mixed vesicles, has been undoubtly confirmed by conductivity, TEM, and zeta-potential results. The concentrations at which these mixed colloidal aggregates form, i.e., the mixed critical microaggregate concentration (CAC), the mixed critical vesicle concentration (CVC), and the mixed critical micelle concentration (CMC), have been determined from conductivity data, while the zeta-potential experiments allow for the characterization of the aggregate/solution interface. The shape and size of the microaggregates and vesicles have been evaluated from TEM and cryo-TEM micrographs, respectively. All of the experimental evidence has been also analyzed in terms of the theoretical packing parameter, P.     

Mixed Aggregates of 1-Methoxyallenyllithium with Lithium Chloride

A combined computational and ¹³C NMR study was used to investigate the formation of mixed aggregates of 1-methoxyallenyllithium and lithium chloride in tetrahydrofuran (THF) solution. The observed and calculated chemical shifts, as well as the calculated free energies of mixed aggregate formation (MP2/6-31+G(d)), are consistent with the formation of a mixed dimer as the major species in solution. Free energies of mixed dimer, trimer, and tetramer formation were calculated by using the B3LYP and MP2 methods and the 6-31+G(d) basis set. The two methods generated different predictions of which mixed aggregates will be formed, with B3LYP/6-31+G(d) favoring mixed trimers and tetramers in THF solution, and MP2/6-31+G(d) favoring mixed dimers. Formation of the sterically unhindered mixed dimers is also consistent with the enhanced reactivity of these compounds in the presence of lithium chloride. The spectra are also consistent with some residual 1-methoxyallenyllithium tetramer, as well as small amounts of higher mixed aggregates. Although neither computational method is perfect, for this particular system, the calculated free energies derived using the MP2 method are in better agreement with experimental data than those derived using the B3LYP method.     

Dissipation-enhanced quartz crystal microbalance studies on the experimental parameters controlling the formation of supported lipid bilayers

We report on the investigations of the transformation of spherically closed lipid bilayers to supported lipid bilayers in aqueous media in contact with SiO(2) surfaces. The adsorption kinetics of small unilamellar vesicles composed of dimyristoyl- (DMPC) and dipalmitoylphosphatidylcholine (DPPC) mixtures on SiO(2) surfaces were investigated using a dissipation-enhanced quartz crystal microbalance (QCM-D) as a function of buffer (composition and pH), lipid concentration (0.01-1.0 mg/mL), temperature (15-37 degrees C), and lipid composition (DMPC and DMPC/DPPC mixtures). The lipid mixtures used here possess a phase transition temperature (T(m)) of 24-33 degrees C, which is close to the ambient temperature or above and thus considerably higher than most other systems studied by QCM-D. With HEPES or Tris.HCl containing sodium chloride (150 mM) and/or calcium chloride (2 mM), intact vesicles adsorb on the surface until a critical density ((c)) is reached. At close vesicle contact the transformation from vesicles to supported phospholipid bilayers (SPBs) occurs. In absence of CaCl(2), the kinetics of the SPB formation process are slowed, but the passage through (c) is still observed. The latter disappears when buffers with low ionic strength were used. SPB formation was studied in a pH range of 3-10, yet the passage through (c) is obtained only for pH values above to the physiological pH (7.4-10). With an increasing vesicle concentration, (c) is reached after shorter exposure times. At a vesicle concentration of 0.01-1 mg/mL, vesicle fusion on SiO(2) proceeds with the same pathway and accelerates roughly proportionally. In contrast, the pathway of vesicle fusion is strongly influenced by the temperature in the vicinity of T(m). Above and around the T(m), transformation of vesicles to SPB proceeds smoothly, while below, a large number of nonruptured vesicles coexist with SPB. As expected, the physical state of the membrane controls the interaction with both surface and neighboring vesicles.     

Mixed vesicle formation on a ternary surfactant system: didodecyldimethylammonium bromide/dodecylethyldimethylammonium bromide/water

The formation of mixed aggregates has been investigated on a ternary system consisting of two cationic surfactants with similar polar heads and two and/or one 12 carbon atom hydrophobic tail, respectively, didodecyldimethylammonium bromide and dodecylethyldimethylammonium bromide and water. The study has been carried out by means of conductivity, zeta potential, and cryogenic transmission electronic microscopy (cryo-TEM) experiments on the very diluted region. A variety of mixed aggregates, microaggregates, vesicles, and micelles has been found, depending on system composition and total surfactant concentration. Mixed critical microaggregate concentration and mixed critical vesicle concentration have been determined from conductivity data. Furthermore, zeta potential and cryo-TEM experiments allow for the characterization of the aggregates/solution interface and of the shape and size of the aggregates. This experimental evidence has also been analyzed in terms of the theoretical packing parameter, P.     

Thermodynamic Properties of Aqueous Solutions of Lithium Chloride

Vapor pressure of aqueous solutions of lithium chloride were measured by differential static method, in a concentration range of 12.9-44.2% weight and in the temperature range of 30-100°C. The experimental data were fitted to the Antoine type equation: log P = A( m ) + B( m )/ T + C( m )/ T 2 , where A, B, and C are constants which are concentration dependent. Enthalpies of solution were calculated by the Haltenberger method using experimental vapor pressure data and heat capacity data. The Duhring and enthalpy-concentration charts have been constructed. These charts may be useful in the performance studies of absorption heat pumps.     

Bimolecular Fluorescence Quenching Reactions in Didodecyldimethylammonium Bromide and Chloride Vesicles and Micelles

Fluorescence decays have been measured for pyrenesulfonate (PyS^?) in the presence of anthraquinone-1-sulfonate (AQ1S^?), for pyrene (Py) at various concentrations, and Py in the presence of AQ1S^? in 5 mmol·dm^?3 didodecyldimethylammonium bromide (DDABr) vesicle solutions. Reaction rate constants were found to increase in the order Py*–Py < PyS^?*–AQ1S^? < Py*–AQ1S^?. Fluorescence decays have also been measured in 5 mmol·dm^?3 didodecyldimethylammonium chloride (DDACl) solutions; the results showed micellar solution behavior, and micellar aggregation numbers and quenching rate constants were obtained. The quenching rate constants in vesicles and micelles were converted to the two dimensional rate constants having the same units. Two dimensional diffusion coefficient and reaction distance were obtained for the PyS^?*–AQ1S^? system on the DDABr vesicle surface.     

Salt-induced vesicle formation from single anionic surfactant SDBS and its mixture with LSB in aqueous solution

Vesicles can be formed spontaneously in aqueous solution of a single anionic surfactant sodium dodecyl benzenesulfonate (SDBS) just under the inducement of salt, which makes the formation of vesicle much easier and simpler. The existence of vesicles was demonstrated by TEM image using the negative-staining method. The mechanism of the formation may be attributed to the compression of salt on the electric bilayer of the surfactant headgroups, which alters the packing parameter of the surfactant. The addition of the zwitterionic surfactant lauryl sulfonate betaine (LSB) makes the vesicles more stable, expands the range of formation and vesicle size, and reduces the polydispersity of the vesicles. The vesicle region was presented in a pseudoternary diagram of SDBS/LSB/brine. The variations of vesicle size with the salinity and mixing ratios, as well as the surfactant concentration, were determined using the dynamic light scattering method. It is found that the vesicle size is independent of the surfactant concentration but subject to the salinity and the mixing ratio of the two surfactants.     

Effect of equimolar salt to decyltrimethylammonium decyl sulfate on vesicle formation and surface adsorption

The aqueous solution of mixture of sodium decyl sulfate (SDeS) and decyltrimethylammonium bromide (DeTAB) has been found to form equilibrium multilamellar vesicles (MLV) spontaneously. We measured the surface tension of the aqueous solution of 1:1 mixture of SDeS and DeTAB as a function of temperature T at various molalities m under atmospheric pressure. The surface density, the entropy of adsorption and the entropy of vesicle formation are evaluated and compared with those of the decyltrimethylammonium decyl sulfate (DeTADeS) aqueous solution system to investigate the role of small counterions in the mechanism of equilibrium vesicle formation. The saturated surface density Gamma (H,C ) vs T curve of the SDeS/DeTAB system sits below that of the DeTADeS system. Therefore, sodium and bromide ions are negatively adsorbed and nevertheless, they neutralize the electric charge of the decyl sulfate ion DeS(-) and the decyltrimethylammonium ion DeTA(+) to some extent to weaken the electrostatic attraction between the polar head groups in the adsorbed film. The net surfactant concentration required for vesicle formation was larger in the SDeS/DeTAB system. Hence, the electrostatic attraction between the polar head groups of the surfactant ions which is one of the major driving forces for vesicle formation is weakened by the presence of the counterions Na(+) and Br(-). Small but distinct changes in the surface density and the entropies of MLV formation of the SDeS/DeTAB system from those of the DeTADeS system were also found.     

稀土元素的电分析化学研究(Ⅵ)——钐-罗丹明B-氯化铵体系的极谱研究

在单扫示波极谱仪上,罗丹明B在氯化铵底液中(0.4M)的导数波(-1.45V,SCE)是一个吸附波,加入Sm³⁺能降低它的波高,二苯胍(1×10^-4M)的存在使罗丹明B(8.4×10^-5M)的波形稳定,Sm³⁺浓度为3×10^-7-2×10^-3M时,浓度与波峰的降低呈线性关系。在直流极谱仪上,在有二氧六圜存在的氯化铵底液中,钐(Ⅲ)-罗丹明B络合物在-1.7V(SCE)有一个吸附还原波。在最佳条件下(0.1M氯化铵,4.2×10^-5M罗丹明B和10%二氧六圜,pH=5.0),在浓度为2×10^-5-2×10^-5M范围内,波高与Sm³⁺浓度有正比关系。比较了稀土-罗丹明B在二氧六圜中的极谱波,销比钐灵敏,铒最灵敏;但是罗丹明B的吸附波妨碍了在它后面的络合物波的灵敏度进一步提高。     

盐引发阴离子/非离子表面活性剂复配体系中囊泡自发形成

在无盐时, 阴离子表面活性剂十二烷基苯磺酸钠(SDBS)与非离子表面活性剂壬基酚聚氧乙烯(10)醚(TX-100)的复配体系中只有混合胶束存在, 而盐的加入即可以引发体系中囊泡的自发形成, 这使得囊泡的形成变得更加简单. 引发机理可以归因于盐对离子表面活性剂的极性头双电层的压缩作用, 减少了极性头的面积, 加上非离子表面活性剂的参与使得堆积参数P增加, 导致了半径更大的聚集体的形成. 制作了SDBS/TX-100/盐水拟三元相图, 通过目测和表面张力的变化确定了囊泡形成的带状区域, 并用负染色电镜(TEM)对囊泡进行了表征, 同时测定了盐度以及相同盐度下表面活性剂浓度对囊泡粒径的影响, 发现囊泡的粒径随着盐度的增加而增加, 而在同一盐度下, 囊泡的粒径基本不受表面活性剂浓度的影响.     

Fluorimetric determination of aluminium in serum

A convenient fluorimetric method for the routine determination of aluminium in serum has been developed using lumogallion [4-chloro-3-(2,4-dihydroxyphenylazo)-2-hydroxybenzene-1-sulphonic acid]. Losses of aluminium during deproteinisation of the serum were prevented by treatment with a combination of 20 or 30% m/V trichloroacetic acid (TCA) and 5% m/VTCA. Iron(III) was removed by extraction into chloroform with capriquat (methyltrioctylammonium chloride) as an Fe3+-lumogallion-capriquat ternary complex. The interference from Cu2+ was eliminated by using thiosulphate as a masking agent. The detection limit was 3.6 ng ml-1 and the calibration graph was linear up to 1.4 micrograms ml-1 of aluminium. Using the proposed method, the average concentration of aluminium in the serum of healthy subjects was found to be 6.8 ng ml-1, in agreement with values reported in the literature.     

A Titration Microcalorimetric Study of the Effects of Halide Counterions on Vesicle-Forming Aggregation in Aqueous Solution of Branched-Chain Alkylpyridinium Surfactants

Titration microcalorimetry is used to study the influences of iodide, bromide, and chloride counterions on the aggregation of vesicle-forming 1-methyl-4-(2-pentylheptyl)pyridinium halide surfactants. Formation of vesicles by these surfactants was characterised using transmission electron microscopy. When the counterion is changed at 303 K through the series iodide, bromide, to chloride, the critical vesicular concentration (cvc) increases and the enthalpy of vesicle formation changes from exo- to endothermic. With increase in temperature to 333 K, vesicle formation becomes strongly exothermic. Increasing the temperature leads to a decrease in enthalpy and entropy of vesicle formation for all three surfactants. However the standard Gibbs energy for vesicle formation is, perhaps surprisingly, largely unaffected by an increase in temperature, as a consequence of a compensating change in both standard entropy and standard enthalpy of vesicle formation. Interestingly, standard isobaric heat capacities of vesicle formation are negative, large in magnitude but not strikingly dependent on the counterion. We conclude that the driving force for vesicle formation can be understood in terms of overlap of the thermally labile hydrophobic hydration shells of the alkyl chains. Copyright 2000 Academic Press.     

堆积模型在萃取中的应用I: 水相介质协同效应

根据推积模型提出一种新的协萃体系,即:(简单阴离子)1+(简单阴离子)2+萃取剂,并以实验证实了水相混合介质的协同效应.研究了UO2/OAc,C1/TBP-二甲苯体系的协萃效应,测定了萃合物的组成以及各种影响分配比的因素.     

Vesicle formation and stability in aqueous mixtures of the hydrolyzed copolymer of styrene-maleic anhydride and conventional single-tailed cationic surfactants

Vesicle formation in aqueous mixtures of the hydrolyzed copolymer of styrene-maleic anhydride (HSMA) and a series of single-tailed cationic surfactants (C(n)H(2n+1)N(C(m)H(2m+1))3Br, n = 8, 10, 12, 16, m = 1, 2, 3, 4) was studied by fluorescence measurement, zeta potential measurement, and transmission electron microscopy. The driving forces of vesicle formation in this kind of system are attributed to the combination of electrostatic attraction and the hydrophobic interaction. Variation of the surfactant structure had a great influence on vesicle formation. A model for the conformation of the molecular packing in the vesicle membrane was suggested on the basis of XRD measurement and Chem3D simulation. Moreover, these vesicles showed superstability to aging time, to NaBr, and to ethanol.     

氯过氧化物酶修饰电极用于岩白菜素的电催化氯化

将氯过氧化物酶(CPO)与双十二烷基二甲基溴化铵(DDAB)混合后滴涂于玻碳(GC)电极表面, 制得CPO-DDAB/GC修饰电极. 循环伏安结果显示, 固定在电极表面的CPO可与电极之间发生直接的电子传递作用. 利用高效液相色谱-质谱联用技术对反应产物进行表征, 结果显示, 以该CPO修饰电极为工作电极, 在氧气饱和的氯化钾-岩白菜素溶液中, 利用CPO催化氧还原生成的过氧化氢可进一步驱动CPO对岩白菜素的催化氯化反应. 经估算总转化数(TTN)达到13600, 即1 mol CPO可催化13600 mol岩白菜素.     

Morphology and viscoelasticity of bilayer aqueous colloids of low-molecular and macromolecular amphiphiles

Aqueous colloids of didodecyldimethylammonium bromide (DMA), allylbis[2-(dodecanoyloxycarbonyl)ethyl]methylammonium bromide (ADM) and polymer of ADM (PADM) were employed for morphological and rheological studies.The polymerization was carried out by irradiation of UV-light for the monomeric colloid. Weight average molecular weight of the polymer is about 16.3×10⁴.Diameters of vesicles at critical micelle (aggregate) concentration were 8 10 nm in the aqueous colloids of DMA, ADM and PADM. Various bilayer textures which were dependent upon the concentration and the temperature could be found in these amphiphiles. In particular, the bilayer textures were full in variety in the PADM system.Rheological properties of the aqueous colloids of these amphiphiles depended strongly upon the bilayer textures.     

V-H2O体系的溶解组分优势区域图和电势-pH 图

运用浓度比较法, 对25 ℃时V-H2O体系进行热力学分析和电化学分析, 编程计算出各溶解组分浓度, 以及固相和液相、各固相间边界线, 确定固相区和液相区的位置. 在此基础上, 绘制出了总V浓度cT(V)=1.0×10-5 mol·L-1时V-H2O体系的溶解组分优势区域图和电势-pH图以及cT(V)=1.0×10-7 mol·L-1时V-H2O体系的电势-pH图. 电势-pH图结果表明在一定温度和压力下, 各相稳定区取决于体系中溶液态物质的总浓度. 随cT(V)的减小, 溶液稳定区增大, 各固相稳定区均不同程度减小.     

离子色谱电感耦合等离子体质谱研究痕量氯金酸在弱碱性体系中金(Ⅲ)的形态

采用离子色谱电感耦合等离子体质谱联用方法研究弱碱性体系下痕量氯金酸中Au(Ⅲ)的形态.结果表明:在弱碱性条件下,总金含量在4.0～30 ng之间,Au(Ⅲ)主要以[AuCl2( OH)2]-和[AuCl(OH)3]-的形式存在.与较高含量的氯金酸溶渡相比,痕量氯金酸溶液中的[AuCl2(OH)2]-至少可以在pH 7.0～10.0范围内存在.溶液外加的Cl-可使[AuCl2 (OH)2]-含量升高同时降低[AuCl (OH)3]-含量;当pH=7.0或Cl-浓度高于0.050 mol/L,会产生不随色谱流出的金络合物,根据水解过程推断该络合物为[AuC13 (OH)]-.在pH 8.0～10.0,Cl-浓度在0.000～0.020 mol/L时,[AuCl2(OH)2]-+OH-=[AuCl (OH)3]-+Cl-的水解平衡常数为不定值,说明痕量氯金酸的水解不仅受pH值和Cl-浓度影响,还受其它因素影响.