Rapid qualitative and quantitative evaluation of deer antler (Cervus elaphus) using near-infrared reflectance spectroscopy

Near-infrared (NIR) spectroscopy has been applied for both the qualitative and quantitative evaluation of the velvet deer antler. The most important parameters of determining the quality of velvet antler are the habitat (the country of origin) and ash content. Conventionally, the habitat is determined by examining the appearance of samples (by human eye), which lacks objectivity. Ash content is measured by an ignition method (measurement ash residue), however, it is too slow (4–5 h) to be used for rapid at-site measurement. Velvet antlers from three different habitats (China, New Zealand, and Russia), albeit the same species of Cervus elaphus, were evaluated in this paper. Soft independence modeling of class analogies (SIMCA) and partial least squares (PLS) were used for classification of habitat and determination of ash content. The habitat was successfully identified with over 80% accuracy, and the ash content prediction result using PLS regression showed good correlation with the reference ignition method with a standard error of prediction (SEP) of 1.264%.     

Near-infrared spectroscopy quantitative determination of Pefloxacin mesylate concentration in pharmaceuticals by using partial least squares and principal component regression multivariate calibration

Pefloxacin mesylate, a broad-spectrum antibacterial fluoroquinolone, has been widely used in clinical practice. Therefore, it is very important to detect the concentration of Pefloxacin mesylate. In this research, the near-infrared spectroscopy (NIRS) has been applied to quantitatively analyze on 108 injection samples, which was divided into a calibration set containing 89 samples and a prediction set containing 19 samples randomly. In order to get a satisfying result, partial least square (PLS) regression and principal components regression (PCR) have been utilized to establish quantitative models. Also, the process of establishing the models, parameters of the models, and prediction results were discussed in detail. In the PLS regression, the values of the coefficient of determination (R²) and root mean square error of cross-validation (RMSECV) of PLS regression are 0.9263 and 0.00119, respectively. For comparison, though applying PCR method to get the values of R² and RMSECV we obtained are 0.9685 and 0.00108, respectively. And the values of the standard error of prediction set (SEP) of PLS and PCR models are 0.001480 and 0.001140. The result of the prediction set suggests that these two quantitative analysis models have excellent generalization ability and prediction precision. However, for this PFLX injection samples, the PCR quantitative analysis model achieved more accurate results than the PLS model. The experimental results showed that NIRS together with PCR method provide rapid and accurate quantitative analysis of PFLX injection samples. Moreover, this study supplied technical support for the further analysis of other injection samples in pharmaceuticals.     

Prediction of phenolic compounds in red wine fermentations by visible and near infrared spectroscopy

Near infrared (NIR) spectroscopy was used to simultaneously predict the concentrations of malvidin-3-glucoside (M3G), pigmented polymers (PP) and tannins (T) in red wine. A total of 495 samples from 32 commercial scale red wine fermentations over two vintages using two grape varieties (Cabernet Sauvignon and Shiraz), and also including as additional variables two types of fermenters, two different yeasts, and three fermentation temperatures were used. Samples were scanned in transmission mode (400-2500 nm) using a monochromator instrument (NIRSystems6500). Calibration equations were developed from high performance liquid chromatography (HPLC) and NIR data using partial least squares (PLS) regression with internal cross validation. Using PLS regression, very good calibration statistics (R_cal²>0.80) were obtained for the prediction of M3G, PP and T with standard deviation (S.D.)/standard error in cross validation (SECV) ratio (residual predictive deviation, RPD)) ranging from 1.8 to 5.8. It was concluded that near infrared spectroscopy could be used as rapid alternative method for the prediction of the concentration of phenolic compounds in red wine fermentations.     

Determination of soil properties using Fourier transform mid-infrared photoacoustic spectroscopy

Photoacoustic spectroscopy (PAS) is based on the absorption of electromagnetic radiation by analyte molecules, and this technique has emerged as a valuable tool for the study of materials like biological, chemical and geological samples. In this paper, Fourier transform mid-infrared photoacoustic spectroscopy (FTIR-PAS) was used in the prediction of soil properties. Air-dried soil samples (n = 56) from Fengqiu Ecology Experimental Station Chinese Academy of Sciences were involved in this experiment, and FTIR-PAS spectra of these soil samples were recorded. These FTIR-PAS spectra indicated abundant soil information, but overlapping of absorption made it difficult to make direct measurement of soil properties. Partial least squares (PLS) models based on soil FTIR-PAS spectra was developed to predict available nitrogen (N), phosphorus (P), potassium (K) and organic matter content of soil. 42 soil samples were firstly used in leave-one-out cross-validation, and calibration error, calibration coefficient, validation error and ratio of standard deviation to prediction error (RPD) were obtained to optimize the PLS factor number; then based on the optimized PLS models the soil properties of the other 14 soil samples were predicted. The calibration statistics showed that the PLS model was suitable to use in the prediction of available N, P, K and organic matter content of soil. This prediction technique was non-destructive, and no sample pre-treatment was needed, which made FTIR-PAS a very promising method for fast evaluation of soil properties as well as soil quality.     

Determination of α-linolenic acid and linoleic acid in edible oils using near-infrared spectroscopy improved by wavelet transform and uninformative variable elimination

This paper proposes an analytical method for simultaneous near-infrared (NIR) spectrometric determination of α-linolenic and linoleic acid in eight types of edible vegetable oils and their blending. For this purpose, a combination of spectral wavelength selection by wavelet transform (WT) and elimination of uninformative variables (UVE) was proposed to obtain simple partial least square (PLS) models based on a small subset of wavelengths. WT was firstly utilized to compress full NIR spectra which contain 1413 redundant variables, and 42 wavelet approximate coefficients were obtained. UVE was then carried out to further select the informative variables. Finally, 27 and 19 wavelet approximate coefficients were selected by UVE for α-linolenic and linoleic acid, respectively. The selected variables were used as inputs of PLS model. Due to original spectra were compressed, and irrelevant variables were eliminated, more parsimonious and efficient model based on WT-UVE was obtained compared with the conventional PLS model with full spectra data. The coefficient of determination (r²) and root mean square error prediction set (RMSEP) for prediction set were 0.9345 and 0.0123 for α-linolenic acid prediction by WT-UVE-PLS model. The r² and RMSEP were 0.9054, 0.0437 for linoleic acid prediction. The good performance showed a potential application using WT-UVE to select NIR effective variables. WT-UVE can both speed up the calculation and improve the predicted results. The results indicated that it was feasible to fast determine α-linolenic acid and linoleic acid content in edible oils using NIR spectroscopy.     

Determination of polyphenols in oats by near-infrared spectroscopy (NIRS) and two-dimensional correlation spectroscopy

Two-dimensional correlation spectroscopy (2DCOS) and near-infrared spectroscopy (NIRS) were used to determine the polyphenol content in oat grain. A partial least squares (PLS) algorithm was used to perform the calibration. A total of 116 representative oat samples from four locations in China were prepared and the corresponding near-infrared spectra were measured. Two-dimensional correlation spectroscopy was employed to select wavelength bands for the PLS regression model for the polyphenol determination. The number of PLS components and intervals was optimized according to the coefficients of determination (R²) and root mean square error of cross validation (RMSECV) in the calibration set. The performance of the final model was evaluated using the correlation coefficient (R) and the root mean square error of validation (RMSEV) in the prediction set. The results showed the band corresponding to the optimal calibration model was between 1350 and 1848?nm and the optimal spectral preprocessing combination was second derivative with second smoothing. The optimal regression model was obtained with an R² of 0.8954 and an RMSECV of 0.06651 in the calibration set and R of 0.9614 and RMSEV of 0.04573 in the prediction set. These measurements reveal the calibration model had qualified predictive accuracy. The results demonstrated that the 2DCOS with PLS was a simple and rapid method for the quantitative determination of polyphenols in oats.     

Partial least square analysis of lysozyme near-infrared spectra

Proteins possess strong absorption features in the combination range (5000-4000 cm⁻¹) of the near infrared (NIR) spectrum. These features can be used for quantitative analysis. Partial least squares (PLS) regression was used to analyze NIR spectra of lysozyme with the leave-one-out, full cross-validation method. A strategy for spectral range optimization with cross-validation PLS calibration was presented. A five-factor PLS model based on the spectral range between 4720 and 4540 cm⁻¹ provided the best calibration model for lysozyme in aqueous solutions. For 47 samples ranging from 0.01 to 10 mg/mL, the root mean square error of prediction was 0.076 mg/mL. This result was compared with values reported in the literature for protein measurements by NIR absorption spectroscopy in human serum and animal cell culture supernatants.     

Potential of visible-near infrared spectroscopy combined with chemometrics for analysis of some constituents of coffee and banana residues

Banana (stalk, leaf, rhizome, rachis and stem) and coffee (leaf and husks) residues are promising feedstock for fuel and chemical production. In this work we show the potential of near-infrared spectroscopy (NIR) and multivariate analysis to replace reference methods in the characterization of some constituents of coffee and banana residues. The evaluated parameters were Klason lignin (KL), acid soluble lignin (ASL), total lignin (TL), extractives, moisture, ash and acid insoluble residue (AIR) contents of 104 banana residues (B) and102 coffee (C) residues from Brazil. PLS models were built for banana (B), coffee (C) and pooled samples (B + C). The precision of NIR methodology was better (p < 0.05) than the reference method for almost all the parameters, being worse for moisture. With the exception of ash (B and C) and ASL (C) content, which was predicted poorly (R² < 0.80), the models for all the analytes exhibited R² > 0.80. The range error ratios varied from 4.5 to 16.0. Based on the results of external validation, the statistical tests and figures of merit, NIR spectroscopy proved to be useful for chemical prediction of banana and coffee residues and can be used as a faster and more economical alternative to the standard methodologies.     

Simultaneous Spectrofluorimetric Determination of Paracetamol and Caffeine in Pharmaceutical Preparations in Solid‐Phase Using Partial Least Squares Multivariate Calibration

Abstract

Partial least‐squares algorithm (PLS)‐1 was used for the solid‐phase spectrofluorimetric determination of paracetamol (PA) and caffeine (CF) in pharmaceutical formulations. In despite of the closely overlapping spectral bands, the method allows the simultaneous quantification and sample preparation prior to analysis is not required. The calibration set consisted of 96 samples with 100–400 mg/g^?1 PA plus 10–65 mg/g^?1 CF; another set of 25 samples was used for external validation. Agreement between predicted and experimental concentrations was fair (r=0.993 and 0.964 for PA and CF models). Prediction performance was evaluated in terms of the coefficient of variability (CV), relative predictive determination (RPD), and ratio error range (RER). The PLS‐1 model was used for the determination of PA and CF in pharmaceutical formulations.     

Detecting Aflatoxin B1 in Peanuts by Fourier Transform Near-Infrared Transmission and Diffuse Reflection Spectroscopy

Aflatioxin B₁ (AFB₁) has been recognized by the International Agency of Research on Cancer as a group 1 carcinogen in animals and humans. A fast, batch, and real-time control and no chemical pollution method was developed for the discrimination and quantification prediction of AFB₁-infected peanuts by applying Fourier transform near-infrared (FT-NIR) coupled with chemometrics. Initially, the near-infrared transmission (NIRT) and diffuse reflection (NIRR) modules were applied to collect spectra of the samples. The principal component analysis (PCA) method was employed to extract the characteristic wavelength, followed by different preprocessing methods (seven methods) to build an effective linear discriminant analysis (LDA) classification and partial least squares (PLS) quantification models. The results showed that, for both the NIRT or NIRR modules, the LDA classification models satisfactorily distinguished peanuts infected with AFB₁ or from those not infected, with external validation showing a 100% correct identification rate and a 0% misjudgment rate. In addition, combined with the concentration of AFB₁ in peanuts determined by enzyme-linked immunoassay assay, the best partial least squares (PLS) models were established, with a combination of the first derivative and the Norris derivative filter smoothing pretreatment (R_c² = 0.937 and 0.984, RMSECV = 3.92% and 2.22%, RPD = 3.98 and 7.91 for NIRR and NIRT, respectively). The correlation coefficient between the predicted value and the reference value in the external verification was 0.998 and 0.917, respectively. This study highlights that both spectral acquisition modules meet the requirements of online, rapid, and accurate identification of peanut AFB₁ infection in the early stages.     

Two- and three-way chemometrics methods applied for spectrophotometric determination of lorazepam in pharmaceutical formulations and biological fluids

In this work, direct determination of lorazepam, an anxiolytic and sedative agent, in pharmaceutical formulations and biological fluids (urine and human plasma) was accomplished based on ultraviolet spectrophotometry (260-380 nm) using parallel factor analysis (PARAFAC) and partial least squares (PLS). The study was carried out in the pH range from 1.0 to 12.0 and with a concentration range from 0.50 to 8.75 μg ml⁻¹ of lorazepam. Multivariate calibration models using PLS at different pH and PARAFAC were elaborated for ultraviolet spectra deconvolution and lorazepam quantitation. The best models for the system were obtained with PARAFAC and PLS at pH = 2.05 (PLS-PH2). The capabilities of the method for the analysis of real samples were evaluated by determination of lorazepam in pharmaceutical preparations and biological (urine and plasma) fluids with satisfactory results. The accuracy of the method, evaluated through the root mean square error of prediction (RMSEP), was 0.0429 for lorazepam with best calibration curve by PARAFAC and 0.0467 for lorazepam with PLS model at best pH. The protolytic equilibria of lorazepam at 25 °C and ionic strength of 0.1 M have also been determined spectrophotometrically. Protolytic equilibria of lorazepam were evaluated by DATAN program using the corresponding absorption spectra-pH data. The obtained pK_a values of lorazepam are 1.54 and 11.61 for pK_a1 and pK_a2, respectively.     

Feasibility study for the use of near infrared spectroscopy in the qualitative and quantitative analysis of green tea, Camellia sinensis (L.)

This paper indicates the possibility to use near infrared spectroscopy (NIR) combined with PLS as a rapid method to estimate the quality of green tea. NIR is used to build calibration models to predict the content of caffeine, epigallocatechin gallate (EGCG) and epicatechin (EC) and for the prediction of the total antioxidant capacity of green tea. For the determination of the total antioxidant capacity, the trolox equivalent antioxidant capacity (TEAC) method is used. Until now, the prediction of the antioxidant capacity as such by use of NIR has not been reported. For caffeine and TEAC, models are build for the whole green tea leaves and also for the ground leaves. For the polyphenols (EGCG and EC), only models for the whole leaves are investigated. A partial least squares (PLS) algorithm is used to perform the calibration. To decide upon the number of PLS factors included in the PLS model, the model with the lowest root mean square error of cross-validation (RMSECV) for the training set is chosen. The correlation coefficient (r) between the predicted and the reference results for the test set is used as an evaluation parameter for the models: for the TEAC results r=0.90 for the model with the whole leaves, r=0.86 for the model with the powdered leaves are obtained. The caffeine prediction model has a correlation coefficient r=0.96 for the whole leaves and r=0.93 for the ground leaves. The correlation coefficient for the EGCG and the EC content models are, respectively 0.83 and 0.44.     

Cytotoxicity and 2D-QSAR study of some heterocyclic compounds

Herein we have studied the cytotoxicity and quantitative structure–activity relationship (QSAR) of heterocyclic compounds containing cyclic urea and thiourea nuclei. A set of 22 hydantoin and thiohydantoin related heterocyclic compounds were investigated with respect to their LC₅₀ values (Log of LC₅₀) against brine shrimp lethality bioassay in order to derive the 2D-QSAR models using MLR, PLS and ANN methods. The best predictive models by MLR, PLS and ANN methods gave highly significant square correlation coefficient (R²) values of 0.83, 0.81 and 0.91 respectively. The model also exhibited good predictive power confirmed by the high value of cross validated correlation coefficient Q² (0.74).     

Infrared Spectroscopy as Alternative to Wet Chemical Analysis to Characterize Eucalyptus globulus Pulps and Predict Their Ethanol Yield for a Simultaneous Saccharification and Fermentation Process

Bioethanol can be obtained from wood by simultaneous enzymatic saccharification and fermentation step (SSF). However, for enzymatic process to be effective, a pretreatment is needed to break the wood structure and to remove lignin to expose the carbohydrates components. Evaluation of these processes requires characterization of the materials generated in the different stages. The traditional analytical methods of wood, pretreated materials (pulps), monosaccharides in the hydrolyzated pulps, and ethanol involve laborious and destructive methodologies. This, together with the high cost of enzymes and the possibility to obtain low ethanol yields from some pulps, makes it suitable to have rapid, nondestructive, less expensive, and quantitative methods to monitoring the processes to obtain ethanol from wood. In this work, infrared spectroscopy (IR) accompanied with multivariate analysis is used to characterize chemically organosolv pretreated Eucalyptus globulus pulps (glucans, lignin, and hemicellulosic sugars), as well as to predict the ethanol yield after a SSF process. Mid (4,000–400 cm^?1) and near-infrared (12,500–4,000 cm^?1) spectra of pulps were used in order to obtain calibration models through of partial least squares regression (PLS). The obtained multivariate models were validated by cross validation and by external validation. Mid-infrared (mid-IR)/NIR PLS models to quantify ethanol concentration were also compared with a mathematical approach to predict ethanol yield estimated from the chemical composition of the pulps determined by wet chemical methods (discrete chemical data). Results show the high ability of the infrared spectra in both regions, mid-IR and NIR, to calibrate and predict the ethanol yield and the chemical components of pulps, with low values of standard calibration and validation errors (root mean square error of calibration, root mean square error of validation (RMSEV), and root mean square error of prediction), high correlation between predicted and measured by the reference methods values (R ² between 0.789 and 0.997), and adequate values of the ratio between the standard deviation of the reference methods and the standard errors of infrared PLS models relative performance determinant (RPD) (greater than 3 for majority of the models). Use of IR for ethanol quantification showed similar and even better results to the obtained with the discrete chemical data, especially in the case of mid-IR models, where ethanol concentration can be estimated with a RMSEV equal to 1.9 g?L^?1. These results could facilitate the analysis of high number of samples required in the evaluation and optimization of the processes.