Cobalt and nitrogen codoped porous carbon as superior bifunctional electrocatalyst for oxygen reduction and hydrogen evolution reaction in alkaline medium

Metal (cobalt)/nitrogen codoped carbon was first fabricated by pyrolysis of coordinated “noncarbonizable” polymer as bifunctional catalyst for ORR and HER, which showed better electrocatalytic performances than most bifunctional doped carbon catalysts in alkaline electrolyte.     

氧还原和析氧反应的双功能电催化剂--氮磷共掺碳负载四氧化三钴

金属-空气电池具备诸多优势,譬如绿色环保、能量转化率高、启动快速、能量密度高、使用寿命和干态存储时间长等.与燃料电池相比,金属-空气电池结构简单,放电电压平稳,成本低,但依然存在一些制约发展的问题,如阴极催化剂.阴极催化剂在金属-空气电池中发挥催化氧还原反应(oxygen reduction reaction, ORR)和析氧反应(oxygen evolution reac-tion, OER)的关键作用.铂及其合金常用作 ORR的单功能催化剂,而钌和铱等是目前 OER催化效率最高的,但 ORR活性很低,因此需要开发出一种廉价而又具备双功能催化作用的催化剂.单异原子掺杂的碳基催化剂的研究集中在 ORR催化性能上,而多异原子共掺碳最近有研究表明具有双催化氧的性质,如氮磷共掺碳.在这些氮磷共掺的碳架中,氮磷共掺物起着 OER催化作用,掺氮物为 ORR催化的活性位点,而掺磷物起着强化作用.异原子掺杂负载的钴基催化剂(如掺氮还原氧化石墨烯载 Co3O4)是近年来双功能催化剂研究的另一个热点.钴基催化剂有着催化 ORR和 OER的多价价态,然而其本身导电性能差,这一缺陷可通过杂化石墨化碳来弥补,石墨化碳有着优良的导电性能.据我们所知,目前仍没有关于氮磷共掺碳负载的 Co3O4双催化氧的研究.我们合成了氮磷共掺碳(NPC)负载的 Co3O4(Co3O4/NPC),并首次探索了其氧还原和析氧性能. Co3O4/NPC合成分两步进行.首先通过三聚氰胺与植酸之间的酯化或缩聚覆盖在导电炭黑颗粒表面,在保护气氛下焙烧得到 NPC,然后经溶剂热反应以及空气中氧化合成 Co3O4/NPC.催化剂的性能综合考虑了催化活性和稳定性两方面.采用线性扫描伏安法评估了 OER和 ORR的催化活性.对于 OER, Co3O4/NPC的起始电势是0.54 V (以饱和甘汞电极为参比电极),在0.80 V时电流密度达到21.95 mA/cm2,均优于 Co3O4/C和 NPC. Co3O4/NPC的高效 OER催化可归因于氮磷共掺物与 Co3O4之间的协同作用.对于 ORR, Co3O4/NPC的催化效率与商用 Pt/C相近,它们的扩散极限电流密度分别为–4.49和–4.76 mA/cm2(E =–0.80 V).在 ORR过程中, Co3O4起到主要的催化作用.采用计时电流(电流-时间)法评估了催化剂的稳定性.经6 h测定,对于 OER, Co3O4/NPC剩46%电流;而对于 ORR,剩95%电流.整体而言, Co3O4/NPC在 OER和 ORR中都表现出高的催化效率以及良好的稳定性.     

石墨化氮化碳负载Cu纳米颗粒用作高效氧还原电催化剂

高活性低成本氧还原反应(ORR)电催化剂是燃料电池和金属/空气电池等可再生能源技术的关键组成部分.在离子液体[(C16mim)2CuCl4]和质子化的石墨化氮化碳(g-CN)的存在下,采用简易的水热反应制备了Cu/g-CN电催化剂用于ORR.与纯的g-CN相比,所制Cu/g-CN表现出高的ORR催化活性:起始电势正移99 mV,为2倍动力学电流密度.另外,Cu/g-CN还表现出比商用Pt/C(HiSPECTM 3000,20%)催化剂更好的稳定性和甲醇容忍性.因此,该催化剂作为廉价的高效ORR电催化剂有望应用于燃料电池中.     

A new strategy to access Co/N co-doped carbon nanotubes as oxygen reduction reaction catalysts

Carbon nanotubes(CNTs),as one-dimensional nanomaterials,show great potential in energy conversion and storage due to their efficient electrical conductivity and mass transfer.However,the security risks,time-consuming and high cost of the preparation process hinder its further application.Here,we develop that a negative pressure rather than a following gas environment can promote the generation of cobalt and nitrogen co-doped CNTs(Co/N-CNTs) by using cobalt zeolitic imidazolate framework(ZIF-67) as a precursor,in which the negative pressure plays a key role in adjusting the size of cobalt nanoparticles and stimulating the rearragement of carbon atoms for forming CNTs.Importantly,the obtained Co/N-CNTs,with high content of pyridinic nitrogen and abundant graphitized structure,exhibit superior catalytic activity for oxygen reduction reaction(ORR) with half-wave potential(E_1/2) of 0.85 V and durability in terms of the minimum current loss(2%) after the 30,000 s test.Our development provides a new pathway for large-scale and cost-effective preparation of metal-doped CNTs for various applications.     

MOF/CC-derivatives with trace amount of cobalt oxides as efficient electrocatalysts for oxygen reduction reaction

Two MOF/CC-derivatives with trace amount of cobalt oxides exhibit excellent electrocatalytic activity for oxygen reduction reaction.     

Co1-xS embedded in porous carbon derived from metal organic framework as a highly efficient electrocatalyst for oxygen evolution reaction

Here, we report a two-step conversion method to fabricate a composite of Co_1-xS embedded in porous carbon framework (Co_1-xS@C) derived from metal organic frameworks (MOFs). The as-prepared porous dodecahedron Co_1-xS@C composite catalyst exhibits excellent electrocatalytic performance towards oxygen evolution reaction (OER).     

简便方法制备氮掺杂的碳球用作高效非金属氧还原催化剂（英文）

随着人们环保意识的不断增强,社会对清洁能源的需求也日益增加.燃料电池具有效率高,燃料来源丰富,可直接将化学能转化成电能且污染小等优点,因而受到了广泛关注.然而,燃料电池的阴极氧还原反应(ORR)速率较慢,成为提高燃料电池整体效率的制约因素.因此,开发高性能的ORR催化剂,加快ORR反应速率具有非常重要的意义.目前,Pt基催化剂被认为是活性最好的商用ORR电催化剂.尽管此类催化剂具有较高的催化活性和良好的稳定性,但Pt的储量有限,价格高昂,抗燃料毒化性能差,限制了其大规模应用.近年来,为了减小Pt的用量,降低催化剂成本,人们除了致力于研究贵金属合金催化剂及非贵金属催化剂外,还把目光聚焦在了非金属催化剂,特别是碳及其复合材料的研究上.在众多碳材料中,碳球因具有良好的表面渗透性和较高的机械稳定性而被广泛应用于催化、吸附、药物输送和能量存储及转化等领域中.然而,碳球的表面化学惰性较强,比表面积较低,使其部分应用受到了限制.因此,人们采用了多种方法来调控碳球的物理化学性质.其中,向碳材料中掺入杂原子,尤其是氮原子的方法广受青睐.因为杂原子的掺入会显著增强作为主体的碳原子给电子的能力和表面吸附性质,从而对ORR表现出优异的催化活性和稳定性.本文以蔗糖作为碳源,三聚氰胺作为氮源,采用水热法及高温热解法制备了一系列氮掺杂的生物质碳球.并对氮掺杂量及热解温度进行了优化.结果表明,石墨化程度及石墨氮含量的提高,能有效地提高催化剂的活性.在优化了的条件下得到的催化剂N0.1C1.9S-900,表现出了比商业Pt/C催化剂更好的ORR催化性能.在0.1 mol/L KOH中,该催化剂催化ORR的起始电位和半波电位分别为–22.6和–133.6 mV(vs.Ag/AgCl),极限电流密度为4.6 mA/cm~2,分别比商业Pt/C高出7.2 mV,5.9 mV和0.2 mA/cm~2.同时,在经过30000 s的稳定性测试中,N0.1C1.9S-900催化剂的电流损失也远低于Pt/C,表明该催化剂具有良好的稳定性.此外,在抗甲醇毒化实验中,相比于商业Pt/C,N0.1C1.9S-900催化剂对甲醇有更好的耐受性.另外,该催化剂催化的ORR属于高效的4e~–途径.可见,该催化剂作为燃料电池的阴极氧还原反应催化剂具有广阔的前景.     

热解二氧化钛/聚苯胺制备高效非贵金属氧还原电催化剂

为了克服传统Pt系催化剂价格昂贵、稳定性差的缺点,采用热解新型Ti O2/聚苯胺(PANI)复合物的方法合成了Ti O2/C催化剂.用扫描电子显微镜、X射线光电子能谱、X射线衍射、傅里叶变换红外光谱、拉曼光谱、透射电子显微镜、循环伏安法和线性扫描伏安法等方法研究了热处理和PANI复合比例对复合物的形貌、成键、晶相组成及氧还原性能的影响.结果表明,PANI与Ti O2间存在相互作用,可以抑制Ti O2的团聚和锐钛矿向金红石的转变.热处理制得Ti O2/C的氧还原活性随着PANI载体含量增加先升高后降低,PANI和Ti O2质量比为35/100时,催化剂的氧还原活性最高.同时,循环伏安和时间-电流曲线测试表明,已制备的复合材料在催化氧还原反应进行时具有较好的稳定性.     

以细菌纤维素为前驱体简便制备氮掺杂碳纤维气凝胶作为高效氧还原催化剂

数十年来,碳气凝胶因其在催化剂载体、电容器和锂电池电极材料以及吸附剂等领域的潜在应用而备受关注.然而,传统碳气凝胶的制备往往使用昂贵且有毒的前驱体,其方法也较为复杂,不利于大规模生产及应用.本文介绍了一种以细菌纤维素为前驱体制备氮掺杂碳纤维气凝胶的方法.该方法廉价高效,简单易行且对环境无害.所制气凝胶具有密度低、孔隙度高、比表面积大以及导电性良好等优点.它继承了细菌纤维素生物质优异的三维交联多孔结构的特点,可直接用作氧还原催化剂,表现出优异的催化性能,预示着其广泛的应用前景.这在该领域的应用报道尚属首次.     

溶剂热法制备磷掺杂碳纳米管作为氧气还原和氧气析出反应双功能电催化剂的研究

对氧气还原(ORR)和氧气析出(OER)反应都具有催化活性的双功能催化剂在金属-空气电池中起着关键作用.本文通过溶剂热反应,一步原位合成了磷掺杂碳纳米管(P-CNT).旋转环盘电极测试表明磷掺杂能够明显提高碳纳米管的催化活性,P-CNT在碱性电解质中对ORR和OER都具有优异的催化活性.P-CNT对ORR的催化还原为近4电子反应,可与商业催化剂Pt/C(20 wt%)相比;而其对OER的催化活性则高于Pt/C(20 wt%).此外,P-CNT的长期稳定性优于Pt/C(20 wt%).P-CNT对ORR和OER的高催化活性和稳定性主要归因于磷对碳的掺杂以及磷与碳间强的化学键合.     

以金属有机骨架为前驱体的高活性氧还原非贵金属催化剂制备

The development of a non‐precious metal electrocatalyst (NPME) with a performance superior to commercial Pt/C for the oxygen reduction reaction (ORR) is important for the commercialization of fuel cells. We report the synthesis of a NPME by heat‐treating Co‐based metal organic frameworks (ZIF‐67) with a small average size of 44 nm. The electrocatalyst pyrolyzed at 600 °C showed the best performance and the performance was enhanced when it was supported on BP 2000. The resulting electrocatalyst was composed of 10 nm Co nanoparticles coated by 3–12 layers of N doped graphite layers which as a whole was embedded in a carbon matrix. The ORR performance of the electrocatalyst was tested by rotating disk electrode tests in O2‐saturated 0.1 mol/L KOH under ambient conditions. The electrocatalyst (1.0 mg/cm2) showed an onset potential of 1.017 V (vs. RHE) and a half‐wave potential of 0.857 V (vs. RHE), which showed it was as good as the commer‐cial Pt/C (20μgPt/cm2). Furthermore, the electrocatalyst possessed much better stability and re‐sistance to methanol crossover than Pt/C.     

Implanting Ni into N-doped puffed carbon: A new advanced electrocatalyst for oxygen evolution reaction

Tailored design and synthesis of high-quality electrocatalysts is vital for the advancement of oxygen evolution reaction (OER). Herein, we report a powerful puffing method to fabricate hierarchical porous N-doped carbon with numerous embedded Ni nanoparticles. Interestingly, during the puffing and annealing process, rice precursor with N and Ni sources can be in-situ converted into Ni-embedded N-doped porous carbon (N-PC/Ni) composite. The obtained N-PC/Ni composite possesses a cross-linked porous architecture containing conductive carbon backbone and active Ni nanoparticles electrocatalysts for OER. The pore formation in N-PC/Ni composite is also proposed because of carbothermic reduction. The N-PC/Ni composite is fully studied as electrocatalysts for OER. Due to increased active surface area, enhanced electronic conductivity and reactivity, the designed N-PC/Ni composite exhibits superior OER performance with a low Tafel slope (∼88 mV/dec) and a low overpotential as well as excellent long-term stability in alkaline solution. Our proposed rational design strategy may provide a new way to construct other advanced metal/heteroatom-doped composites for widespread application in electrocatalysis.     

Atomic Fe-N_4 sites on electrospun hierarchical porous carbon nanofibers as an efficient electrocatalyst for oxygen reduction reaction

Porous carbon materials doped with atomically dispersed metal sites(ADMSs) are promising electrocatalysts for oxygen reduction reaction(ORR) electrocatalysis.In this work,we fabricated hierarchical porous nitrogen-doped carbon nanofibers with atomically dispersed Fe-N_4 sites by carbonization of electrospinning iron-based metal-organic frameworks(MOFs)/polyacrylonitrile nanofibers for ORR electrocatalysis.Remarkably,the re sultant carbon nanofibers with atomically dispersed FeN_4 sites exhibit extraordinary electrochemical performance with an onset potential of 0.994 V and a halfwave potential of 0.876 V in alkaline electrolyte,comparable to the benchmark commercial Pt/C catalyst.The high catalytic performance is originated from the unique hierarchically porous 1 D carbon structure and abundant highly active atomically dispersed Fe-N_4 sites.     

有机膦酸盐衍生的氮掺杂的磷酸钴/碳纳米管杂化材料作为高效氧还原电催化剂（英文）

随着环境污染和能源危机的日益严重,探索高效的非贵金属氧还原电催化剂来替代商业Pt/C迫在眉睫.其中,报道比较多的是具有钴基活性物种和氮掺杂碳的复合材料例如Co-Nx-C, Co3O4/GO, Co-N/CNT等,该复合材料具有高导电性、良好的稳定性和优异的催化活性.与其他钴基催化剂相比,磷酸钴由于其成本低廉,对环境友好,多功能的优良特性,已被广泛应用于催化、吸附、分离及储能等领域,在电催化方面也有极大的应用潜力.研究表明,磷酸基团不仅可以充当质子受体,也会诱导局部钴原子的几何结构发生扭曲,从而有利于水分子的吸附并促进析氧反应的发生.此外,磷酸钴也被证实具有一定的氧还原活性.尽管磷酸钴电催化剂的研究已经取得了一定进展,磷酸根有利于质子传输,但是其导电性很差,不利于电荷的转移和传输,使得其电催化活性不高.将磷酸钴和导电碳材料复合是解决问题的有效方法.而且,磷酸钴在碱性溶液中并不稳定,极大限制了其在电催化氧还原中的应用.金属有机膦酸盐是一类包含金属离子和有机膦酸配体的杂化材料,通过简单的焙烧便可以很容易地得到金属无机磷酸盐,并且在焙烧过程中氮掺杂的碳也会原位产生,并包覆在磷酸钴的表面,使得其导电性和催化活性大大提高.为此,本研究组制备了有机膦酸钴衍生的磷酸钴和氮磷掺杂的石墨烯的复合材料并用于电催化氧还原和析氧反应,所得到的材料导电性和稳定性良好,然而,该催化剂的表观活性与商业Pt/C相比仍有较大差距,且使用有机膦酸钴作为前驱体对活性的影响也不甚清楚.因此,本文采用含氮的有机膦酸配体乙二胺四亚甲基膦酸钠(EDTMPS)为磷源制备了氮掺杂的磷酸钴/碳纳米管杂化材料(CoPiC-N/CNT-3),其催化活性和稳定性良好,并进一步探讨了各种不同因素对电催化活性的影响.XRD和TEM结果表明,用这种方法得到的磷酸钴(CoPiC)为Co2P2O7物相,与磷酸二氢钠为磷源制备得到的CoPi相比,CoPiC的表面有石墨化碳层的存在, EDS图谱表明, Co, P, C, N均匀地掺杂到复合材料的骨架结构中.Raman光谱结果表明,石墨化碳层的存在和适量的碳纳米管的引入均可以增强复合材料的石墨化程度并提高了导电性,而氮掺杂导致其缺陷位点增多.XPS结果进一步表明,有机膦酸钴可以作为前驱体可制得氮掺杂的磷酸钴/碳纳米管杂化材料.电催化反应测试表明, CoPi C-N/CNT-3的氧还原活性与商业Pt/C相当,其遵循的是4电子的反应路径,而且抗甲醇氧化能力和稳定性均优于Pt/C.原因主要归结于以下几点:(1)磷酸钴颗粒与氧化碳纳米管的协同作用可以显著增强氧还原催化活性,引入的碳纳米管可以克服磷酸钴导电性差的缺陷;(2)磷酸钴在复合材料中分散均匀,使得可以充分利用催化剂的活性位点;(3)氮掺杂可以调变材料的电子结构,从而改善催化活性;(4)石墨化碳层的存在可以改善材料的电子导电性和稳定性,有利于电子转移并可以保护磷酸钴颗粒在催化氧还原反应过程中不被电解液腐蚀.可见,所制有机膦酸衍生的氮掺杂的磷酸钴/碳纳米管杂化材料有望替代Pt/C催化剂,并推动清洁可再生能源领域的相关研究.     

Effect of doping order on metal-free heteroatoms dual-doped carbon as oxygen reduction electrocatalyst

Metal-free heteroatoms dual-doped carbon has been recognized as one of the most promising Pt/C-substitutes for oxygen reduction reaction(ORR).Herein,we optimize the preparation process by doping order of metal-free heteroatoms to obtain the best electrocatalytic performance through three types of dual-doped carbon,including XC-N(first X doping then N doping),NC-X(first N doping then X doping) and NXC(N and X doping)(X=P,S and F).XC-N has more defect than the other two indicated by Raman spectra.X-ray photoelectron spectrom(XPS) measurements indicate that N and X have been dual-doped into the carbon matrix with different doping contents and modes,Electrocatalytic results,including the potential of ORR peak(E_p),the half-wave potential,the diffusion-limiting current density mainly follows the order of XC-NNC-X NXC,Furthermore,the synergistic effect of second atom doping are also compared with the single doped carbon(NC,PC,SC and FC).The differences in electronegativity and atomic radius of these metal-free heteroatoms can affect the defect degree,the doping content and mode of hete roatoms on carbon matrix,induce polarization effect and space effect to affect O_2 adsorption and product desorption,ultimately to the ORR electrocatalytic performance.     

掺氮介孔炭作为双功能材料用于氧还原与超级电容器

以壳聚糖为含氮碳源,正硅酸乙酯为软模板,硝酸镍为催化剂,通过简单的低温水热法及后续炭化,成功合成出掺氮介孔炭材料（NMC-1）.NMC-1含有多孔结构以及氮氧等杂原子,能提高其电催化性能、双电层电容与赝电容.由于NMC-1在碱液中表现出显著的催化氧还原反应活性和具有较高的超级电容器比电容（在0.2A/g时为252F/g）及好的循环稳定性,因此,它有可能作为一种可再生、环保的双功能材料同时应用于燃料电池与超级电容器领域.     

调控碳材料的功函数以大幅度提升其电催化氧还原性能

氧的电催化还原反应是燃料电池装置与金属空气电池的阴极反应, 具有重大的研究意义. 在众多的非铂催化剂中,碳材料因其低廉的价格以及独特的物理化学性质受到了广泛的关注. 自从发现氮掺杂的碳纳米阵列具有优异的氧还原活性后, 不同类型的氮掺杂的碳也得到了深入研究. 例如近年来兴起的由金属有机框架衍生的氮掺杂的碳材料, 兼具丰富...     

A novel ball-in-ball hollow oxygen-incorporating cobalt sulfide spheres as high-efficient electrocatalyst for oxygen evolution reaction

Transition-metal chalcogenides with hollow nanostructure,especially cobalt sulfides,are considered as the most pro mising non-precious metal catalysts for oxygen evolution reactio n.However,it is difficult to synthesize oxygen-containing cobalt sulphides with hollow structure due to the different physical/chemical properties between metal sulfides and metal cobalts.Herein,we report a novel oxygencontaining amorphous cobalt sulfide ball-in-ball hollow sphere s(Co-S-O BBHS) synthesized by an anion exchange method.Taking advantage of the ball-in-ball hollow structure,the amorphous Co-S-O BBHS shows supe rior oxygen evolution reaction(OER) electrocatalytic performance with a low overpotentiat of285 mV at 10 mA/cm~2,small Tafel slope of 49.67 mV/dec,high Faraday efficiency of 96%,and satisfied durability.Experiments and DFT calculations demonstrate that the introduction of oxygen and sulfur modulates the electronic structure of Co-S-O BBHS,thus enhancing the adsorption of *0(adsorbed 0 species on catalyst surface) intermediate,which greatly boosts the catalytic activity towards OER.This work provides a new strategy for controllable synthe sis of complex hollow structures of transition-metal chalcogenides for OER.     

氮掺杂的碳材料中石墨化氮和吡啶氮对氧还原反应的催化特性

目前,开发高效的阴极氧还原反应(ORR)电催化剂是实现燃料电池和金属-空气电池商业化发展急需完成的目标。在过去的几十年中,人们在探索廉价高效的 ORR电催化剂(如 N掺杂的非金属及非铂电催化剂)领域做了广泛的研究。在 N掺杂的碳基 ORR催化剂中,已知的 N基活性位点主要分为四类,即吡啶类氮(P-N)、吡咯类氮(Py-N)、石墨化氮(G-N)和氧化类氮(O-N)。尽管人们对这四种类型氮的活性位点做了大量的研究,但是它们在催化反应中起到的 ORR催化作用以及催化机理和活性位点本身结构的关系仍不够明确。早期的研究中有人认为 P-N或者 Py-N是 ORR催化活性位点,也有人认为是 G-N起作用。最近也有研究表明, P-N和 G-N都是 ORR催化活性位点,只是在 ORR中所起的催化能力不同。因此,很有必要认清这些问题。
　　本文通过 Hummer法酸性氧化一次和两次碳黑 Vulcan XC-72(VXC-72)以及随后高温热处理,制备了一系列 ORR催化剂 VXCO-1, VXCO-2, VXCO-1(900)和 VXCO-2(900),采用场发射扫描电子显微镜(SEM), N2吸附脱附法,元素分析仪(EA), X射线光电子能谱(XPS),拉曼光谱仪(Raman), X射线衍射能谱(XRD),电化学循环伏安法和线性伏安法测试等手段研究 Hummers法酸氧化和高温热处理对 VXC-72形貌组成的影响,以及这些碳基中成分和其催化 ORR能力的关系。
　　 SEM结果表明, Hummer法酸性氧化处理 VXC-72一次和两次后可以逐层剥落其最外边的碳层结构,最终得到表面光滑的类片层状结构的碳材料(VXCO-1和 VXCO-2)。这种表面光滑的类片层状结构的碳材料比表面积大于处理前的 VXC-72,而高温热处理之后的碳材料(VXCO-1(900)和 VXCO-2(900))由于类石墨层碎片结构蒸发损失暴露出更多内部的微孔和介孔结构使比表面积增加。 Raman和 XRD结果表明,氧化处理使碳材料的石墨化程度增加,而高温热处理则降低了其石墨化程度。
　　 EA和 XPS结果表明, Hummer法酸性氧化处理可以使在碳材料中掺入的 N以石墨化的为主,高温热处理却使得石墨化氮转变为吡啶类的氮。 ORR结果发现,活性的石墨化氮倾向于使 ORR反应经历两电子过程,从而生成 H2O2为主要产物;而吡啶类氮的活性位点更倾向于使 ORR反应经过四电子过程,主产物是水。该结果有助于新型碳基氧还原催化剂的设计和分析。