MS／MS Study of Deoxydinucleotides Bound with Alkali—metal Ions Using ESI—MS

Positive ion ESI-MS has been used to examine the fragmentation pathways of the complex ions of deoxydinucleotides with H^ ,Na^ ,K^ by LCQ instrument.It had been found that the dissociation Varied markedly due to the differences of the base sequence.The alkali-metal ion binding site and the charcaterization of dissociation were directed by the size of metal ion,the sequesce of base and the steric hindrance.     

Accurate determination of an immunosuppressant in stented swine tissues with LC–MS/MS

During stent development, accurate monitoring of the drug concentration in animal tissues can provide critical information on how the drug is released into the circulation and the surrounding tissues. To establish the relationship between the drug concentration and the distance from the stent to the target tissue, a comprehensive strategy was developed for sample collection, sample homogenization and sample storage as well as sample analysis. This strategy was developed with the analytical chemists and animal surgical specialists working together as a team. The optimized sampling process was designed to yield a representative sample, appropriately located and of an appropriate size. The sampling process was also designed to eliminate the potential for carryover and cross-contamination. During sample processing, the analyte solution was spiked into blank tissues using a sharp needle and a gas-tight syringe to prepare tissue quality control samples. These tissue quality controls were then used to evaluate the stability of the drug in solid tissue and homogenate, the homogenization carryover, the cross-contamination and the recovery of the drug during method validation and to monitor the overall process of drug analysis of the swine tissues. This thorough strategy has been applied to the accurate determination of zotarolimus in swine tissues for regulated toxicology studies. The entire process was controlled, including precise tissue sampling, compound-based tissue homogenization, method validation, and the application of the method to regulated toxicokinetics studies. The results demonstrate that analytical chemistry concepts can be successfully integrated into toxicokinetics studies in order to collect precise samples and obtain meaningful results. The strategy can be applied to similar toxicokinetics studies of locally administrated drugs in tissues.     

Therapeutic drug monitoring by LC–MS–MS with special focus on anti-infective drugs

Liquid chromatography coupled to mass spectrometry nowadays plays an important role in the field of therapeutic drug monitoring (TDM), especially of new compounds for which no immunoassays are available. This paper reviews LC–MS(–MS) methods published recently for anti-infective drugs: antiretroviral drugs, other antiviral drugs, antibacterial drugs, antihelmintic drugs, antimalarial drugs, and other antiprotozoal drugs. An overview of the different methods is given, with special focus on selection of the internal standard and validation procedures.     

Determination of nitrophenolate sodium in aquatic products by HPLC–MS/MS with atmospheric pressure chemical ionization

The paper describes an efficient method for the determination of nitrophenolate sodium in aquatic products by HPLC combined with atmospheric pressure chemical ionization with tandem mass spectrometry (LC–APCI-MS/MS). Analytes were extracted from aquatic products by acetonitrile, the extracts were degreased by alumina and concentrated, the concentrated solution was further purified by Oasis HLB cartridge. Finally, the analytes were separated and detected by LC–APCI-MS/MS in negative ion mode. Excellent linearity with correlation coefficients of more than 0.995 was observed in the concentration range of 2–200 μg/L for p-nitrophenol sodium and 2-methoxy-5-nitrophenolate sodium, and 5–200 μg/L for ο-nitrophenol sodium. Recovery rates of nitrophenolate sodium between 86.1–94.3% were achieved. Limit of quantitation of p-nitrophenol sodium and 2-methoxy-5-nitrophenolate sodium was 2 μg/kg and ο-nitrophenol sodium was 5 μg/kg, with relative standard deviations <10%. This method was employed in the practical analysis of spiked and naturally contaminated aquatic products.     

Analysis and validation of perfluorinated compounds in water,sediment and fish with LC-ESI–MS/MS

The analysis of perfluorinated compounds (PFCs) in environmental matrices is challenging, as the concentrations are generally low, but the risk of contamination is high. Sample preparation is a critical step and it is necessary to minimise the possibility of contamination. In this study, we successfully applied and validated a modified ion pair extraction method to quantify PFCs in sediment and fish samples. A large volume injection method was validated and used to quantify PFCs in different water matrices. Isotope internal standard of every analyte was applied to correct matrix effects. The recoveries of the analytes were 92–106% for water matrix, 93–119% for fish matrix and 86–103% for soil matrix whereas the achieved limit of quantitation values were 1.3–14.9 ng/L for water, 0.19–0.28 μg/kg for fish and 0.14–0.41 for soil samples. Thirty-one surface water, 8 stormwater and 41 sediment samples collected all over Estonia were analysed and 4 (out of 8 analysed) PFCs were found in quantitative amount. The most frequently detected analyte perfluorobutanoic acid (PFBA) was found in 26% of the water samples with a maximum concentration of 137 ng/L.     

Application of TA–MS combined with PulseTA for characterization of materials

The thermal behavior of the anticancer drug-irinotecan was measured by Thermogravimetry–Differential thermal analysis (TG–DTA) to explore the application of TG–DTA in nanomedicine firstly. The TG–DTA result showed that the irinotecan was oxidized completely before 700 °C. When irinotecan was loaded onto nanosized mesoporous silica spheres, the loading capacity for irinotecan measured by TG–DTA was about 9.11% in the irinotecan/mesoporous SiO₂ composite, similar to the typical UV–Vis spectra results (10.5%), which showed that TG–DTA characterization provided an alternative method to determine the drug loading amount on inorganic carriers. Secondly, Thermogravimetry–Differential scanning calorimetry–Mass Spectrometry coupling techniques (TG–DSC–MS) were used to characterize the hydrogen adsorption temperature and capacity of TiCr_1.2 (V-Fe)_0.6 alloy. The MS result showed that the released region of hydrogen was 250–500 °C, which was consistent with the TG–DSC results. Lastly, TA–MS combined with pulse thermal analysis (PulseTA) were used for a simultaneous characterizing study in the changes of mass, determination and quantitative calibration of the evolved nitrogen formed during the thermal decomposition of the InN powder. The results showed that relative error of this method between measured value and theoretical value was 2.67% for the quantitative calibration of evolved N₂. It shows that TA–MS combined with PulseTA techniques offer a good tool for the quantification of the evolved nitrogen in the InN powder.     

Determination of methylisothiocyanate in soil and water by HS-SPME followed by GC–MS–MS with a triple quadrupole

Methylisothiocyanate (MITC) is the main degradation product of metam sodium, a soil disinfectant widely used in agriculture, and is responsible for its disinfectant properties. Because MITC is highly toxic and volatile, metam sodium has to be applied in a manner that tries to reduce atmospheric emissions but still maintains adequate concentration of MITC in soil to ensure its disinfectant effect. Thus, monitoring of MITC concentrations in soil is required, and to this end sensitive, fast, and reliable analytical methods must be developed. In this work, a headspace solid-phase microextraction (HS-SPME) method was developed for MITC determination in water and soil samples using gas chromatography-tandem mass spectrometry (GC–MS–MS) with a triple-quadrupole analyzer. Two MS–MS transitions were acquired to ensure the reliable quantification and confirmation of the analyte. The method had linear behavior in the range tested (0.026–2.6 ng mL^?1 in water, 1–100 ng g^?1 in soil) with r ² over 0.999. Detection limits were 0.017 ng mL^?1 and 0.1 ng g^?1 in water and soil, respectively. Recoveries for five replicates were in the range 76–92 %, and RSD was below 7 % at the two spiking levels tested for each matrix (0.1 and 1 ng mL^?1 for water, 4 and 40 ng g^?1 for soil). The potential of using multiple HS-SPME for analyzing soil samples was also investigated, and its feasibility for quantification of MITC evaluated. The developed HS-SPME method was applied to soil samples from experimental plots treated with metam sodium following good agriculture practices. Figure

?     

On-line coupling of ion chromatography with ICP–AES and ICP–MS

Ion chromatography (IC) and atomic spectrometry are sometimes rivalling and sometimes ideally cooperating techniques. The cooperating applications of the on-line coupling of IC and inductively coupled plasma–atomic emission spectroscopy or –mass spectrometry span from ultra trace analysis utilizing ion exchange as preconcentration technique via speciation applications taking advantage of the unique element specific detection offered by atomic spectroscopy until classical IC applications with atomic spectrometry as a sensitive and selective detector. Characteristics of this type of hyphenated technique are the simple physical coupling, the unique sensitivity for most elements and the superior selectivity obtainable for specific applications.     

Adduct supported analysis of γ-hydroxybutyrate in human serum with LC-MS/MS

To avoid the detection of small fragmentation products of γ-hydroxybutyrate (GHB), a liquid chromatography–tandem mass spectrometry GHB quantification method in human serum supported by adduct formation was developed and validated. The continuous infusion of GHB/GHB-D6 made the identification of two adducts possible and GHB/GHB-D6 sodium acetate adduct fragmentation was used as target mass transition. A Luna 5 μm C18 (2) 100 A, 150 mm?×?2 mm analytical column and elution with a programmed flow of the mobile phase consisting of 10 % A (H₂O/methanol = 95/5, v/v) and 90 % B (H₂O/methanol = 3/97, v/v), both with 10 mM ammonium acetate and 0.1 % acetic acid (pH?=?3.2), were used. Protein precipitation with 1 mL of the mobile phase B was used as the sample preparation. The calculated limit of detection/quantification was 1 μg/mL. The presented study shows that the fragmentation of GHB sodium acetate adducts is an effective way of quantification of this small molecule and is an interesting alternative to other methods based on the detection of ions smaller than 85 Da. This fact together with the short analysis time of 3 min and the fast sample preparation make this method very attractive for forensic/clinical application.     

QuEChERS method combined with GC‒MS for pesticide residues determination in water

A miniaturized, QuEChERS based, liquid–liquid extraction method followed by gas chromatography–mass spectrometry was developed and validated for pesticide residues determination in water. Malathion, chlorpyrifos, profenofos, chlorfenapyr, pyriproxyfen, λ-cyhalothrin, coumaphos and α-cypermethrin were selected for this study. The accuracy, precision, specificity, linearity, limit of detection and limit of quantification were evaluated. The recovery ranged from 85.3 to 107% with RSD ranging from 1.8 to 15.4%. The linearity showed reliable range (0.995–0.999). The limit of detection ranged from 0.3 to 4 μg/L. Matrix effect was evaluated. The obtained results meet the European Commission standard legislations, implying that our method can be considered accurate and reproducible. The validated method was used to analyze river and well water samples. No residues of the investigated pesticides were detected in all collected water samples.     

Pressurized Liquid Extraction Coupled with LC–ESI–MS–MS for the Determination of Herbicides Chlormequat and Mepiquat in Flours

This paper describes a new method for the rapid extraction and unequivocal confirmation of herbicides chlormequat and mepiquat in wheat flours and various flours utilized in infant foods. The highly automated extraction procedure is based on accelerated solvent extraction, followed by liquid chromatography-tandem mass spectrometry as a confirmatory analysis. Typical recoveries from flours and baby food samples ranged from 83 to 99% at a fortification level of 10 ppb, corresponding to the maximum residue limits established by the European Union; while relative standard deviations (RSD) were less than 10% for all samples. The limit of detection (signal-to-noise ratio = 3) of the method for the considered phenols in baby food samples are less than 0.1 μg g^?1. Traces of the selected herbicides have been detected in about 50% of baby foods, bought from different Roman supermarkets and butcher shops, applying the described methodology.     

Multi-mycotoxin analysis of animal feed and animal-derived food using LC–MS/MS system with timed and highly selective reaction monitoring

Mycotoxins have the potential to enter the human food chain through carry-over of contaminants from feed into animal-derived products. The objective of the study was to develop a reliable and sensitive method for the analysis of 30 mycotoxins in animal feed and animal-derived food (meat, edible animal tissues, and milk) using liquid chromatography–tandem mass spectrometry (LC–MS/MS). In the study, three extraction procedures, as well as various cleanup procedures, were evaluated to select the most suitable sample preparation procedure for different sample matrices. In addition, timed and highly selective reaction monitoring on LC–MS/MS was used to filter out isobaric matrix interferences. The performance characteristics (linearity, sensitivity, recovery, precision, and specificity) of the method were determined according to Commission Decision 2002/657/EC and 401/2006/EC. The established method was successfully applied to screening of mycotoxins in animal feed and animal-derived food. The results indicated that mycotoxin contamination in feed directly influenced the presence of mycotoxin in animal-derived food.

Open image in new window

Graphical abstract Multi-mycotoxin analysis of animal feed and animal-derived food using LC-MS/MS

     

Determination of vancomycin and meropenem in serum and synovial fluid of patients with prosthetic joint infections using UPLC–MS/MS

Numerous studies have suggested that intra-articular administration of antibiotics following primary revision surgery may be one of the methods for treating prosthetic joint infection (PJI). Vancomycin and meropenem are the two most commonly used antibiotics for local application. Determining the concentrations of vancomycin and meropenem in the serum and synovial fluid of patients with PJI plays a significant role in further optimizing local medication schemes and effectively eradicating biofilm infections. This study aimed to establish a rapid, sensitive, and accurate ultra-performance liquid chromatography–tandem mass spectrometry (UPLC–MS/MS) method for determining the concentrations of vancomycin and meropenem in human serum and synovial fluid. Serum samples were processed using acetonitrile precipitation of proteins and dichloromethane extraction, while synovial fluid samples were diluted before analysis. Chromatographic separation was achieved in 6 min on a Waters Acquity UPLC BEH C18 column, with the mobile phase consisting of 0.1% formic acid in water (solvent A) and acetonitrile (solvent B). Quantification was carried out using a Waters XEVO TQD triple quadrupole mass spectrometer with an electrospray ionization (ESI) source in positive ion mode. The multiple reaction monitoring (MRM) mode was employed to detect the following quantifier ion transitions: 717.95–99.97 (norvancomycin), 725.90–100.04 (vancomycin), 384.16–67.99 (meropenem). The method validation conformed to the guidelines of the FDA and the Chinese Pharmacopoeia. The method demonstrated good linearity within the range of 0.5–50 μg/ml for serum and 0.5–100 μg/ml for synovial fluid. Selectivity, intra-day and inter-day precision and accuracy, extraction recovery, matrix effect, and stability validation results all met the required standards. This method has been successfully applied in the pharmacokinetic/pharmacodynamic (PK/PD) studies of patients with PJI.     

Identification of in vitro and in vivo metabolites of 12β-hydroxylveratroylzygadenine associated with neurotoxicity by using HPLC–MS/MS

Metabolism study was carried out on 12b-hydroxylveratroylzygadenine(VOG) that is a cevine-type alkaloid existing in Veratrum nigrum L. and a neurotoxic component. In order to better understand the potential mechanism of neurotoxicity of VOG, this study measured VOG-induced DNA damage in the cerebellum and cerebral cortex of mice after 7 days repetitive oral dose by using single-cell gel electrophoresis(Comet assay). High performance liquid chromatography-tandem mass spectrometry(LC–MS/MS) was developed and applied to separate and identify in vitro and in vivo metabolites of VOG for investing the possible relationship of metabolism and neurotoxicity. In vitro experiment was carried out using rat liver microsomes, while the in vivo study was conducted on rats. The obtained results indicated that VOG might cause DNA damage in cerebellum and cerebral cortex of mice in a dosedependent manner. Hydrolysis of ester bond and O-demethylation were proposed to be the main in vivo metabolic pathways of VOG, while the major in vitro metabolic pathways were proposed as methyl oxidation to aldehyde, dehydrogenation, hydrolysis of ester bond, hydrolysis of ester bond together with acetylation, and methoxylation. O-Demethylation reaction was likely to be associated with reactive oxygen species production, leading to the DNA damage.     

Matrix Solid-Phase Dispersion Combined with GC–MS/MS for the Determination of Organochlorine Pesticides and Polychlorinated Biphenyls in Marketed Seafood

An analysis method based on matrix solid-phase dispersion (MSPD) and gas chromatography tandem mass spectrometry was developed and applied for the analysis for organochlorine pesticides (OCPs) and polychlorinated biphenyls (PCBs) in the marketed seafood such as fish, shrimp and shellfish. The parameters of the method including the type and amount of the absorbent, as well as the type and volume of the elution solution were optimized. The recoveries were between 70 and 120% with RSDs less than 20%, and the LODs and LOQs were 0.011–0.046 and 0.037–0.153 ng g^?1 under optimized conditions. The results showed that most of the OCPs and PCBs were detectable in the marketed samples with the average concentration range of 0.722–14.206 and 0.034–1.184 ng g^?1, respectively. Among the 21 OCPs detected, DDTs had a relatively higher concentration level. And in the PCBs, the concentration of PCB28 was over 45% of the total PCBs determined in all the samples. The developed method was simple, fast and effective, and could successfully be applied for trace amount of OCPs and PCBs determination in seafood matrixes.     

Practical and quality-control aspects of multi-element analysis with quadrupole ICP–MS with special attention to urine and whole blood

Two screening methods were developed for rapid analysis of a great number of urine and blood samples within the framework of an exposure check of the population after a firework explosion. A total of 56 elements was measured including major elements. Sample preparation consisted of simple dilution. Extensive quality controls were applied including element addition and the use of certified reference materials. Relevant results at levels similar to those found in the literature were obtained for Co, Ni, Cu, Zn, Sr, Cd, Sn, Sb, Ba, Tl, and Pb in urine and for the same elements except Ni, Sn, Sb, and Ba in blood. However, quadrupole ICP–MS has limitations, mainly related to spectral interferences, for the analysis of urine and blood, and these cause higher detection limits. The general aspects discussed in the paper give it wider applicability than just for analysis of blood and urine—it can for example be used in environmental analysis.     

Determination of Antioxidants and Preservatives in Cosmetics by SPME Combined with GC–MS

A rapid and simple procedure for the determination of antioxidants and preservatives in cosmetics has been developed utilizing solid-phase microextraction combined with GC–MS. A silica fiber coated with polyacrylate provided the highest extraction efficiency. Detection limits in the range from 0.4 to 8.5 ng mL⁻¹ were obtained. Linearity is over a wide range from 1 to 2,000 ng mL⁻¹ with a relative standard deviation under 16%. Cosmetic from a local supermarket were analysed for antioxidants and preservatives to demonstrate the effectiveness of the proposed method. The concentration of antioxidants and preservatives determined was 20–1,218 μg g⁻¹ for methylparaben and 5–3,779 μg g⁻¹ for propylparaben.     

Cloud-Point Extraction Combined with LC–MS for Analysis of Memantine in Rat Plasma

The feasibility of using cloud-point extraction as a simple and effective means of recovery of memantine from rat plasma before LC–MS analysis has been demonstrated. A non-ionic surfactant Triton X-114 was used for extraction of the memantine. On increasing the temperature to the cloud point, phase separation occurred, resulting in an aqueous phase, and a surfactant-rich phase containing most of the analytes. The extraction conditions, for example amount of surfactant, temperature, NaOH concentration, and time of incubation, were optimized. Chromatographic separation was accomplished on a C₁₈ analytical column with 56:44 (v/v) methanol–0.2% aqueous formic acid as isocratic mobile phase at a flow rate of 0.8 mL min^?1. Under the optimum experimental conditions recovery was satisfactory (91–101%) without interference from the surfactant. The method was shown to be reproducible and reliable with intraday precision below 6.6%, interday precision below 14.3%, and linear range from 1 to 400 ng mL^?1. The method was successfully applied to a pharmacokinetic study of memantine in rats after oral and intravenous administration.     

Quantification of monohydroxy-PAH metabolites in urine by solid-phase extraction with isotope dilution-GC–MS

For measurement of biomarkers from polycyclic aromatic hydrocarbon (PAH) exposure, an analytical method is described quantifying hydroxylated PAH (OH-PAH) in urine samples. This method determined monohydroxy metabolites of naphthalene, fluorene, phenanthrene, fluoranthene, pyrene, chrysene, benzo[c]phenanthrene, and benz[a]anthracene. The sample preparation consisted of enzymatic hydrolysis, solid-phase extraction and derivatization with a silylating reagent. Five carbon-13 labeled standards were used for isotope dilution. Analytes were separated by gas chromatography (GC) and quantified with high-resolution mass spectrometry (HRMS). This method produced good recoveries (41-70%), linearity, and specificity. Data were corrected for blank levels from the naphthalene, fluorene, and phenanthrene metabolites. Method detection limits ranged from 2 ng L(-1) for 1-hydroxypyrene to 43.5 ng L(-1) for 1-hydroxynaphthalene. Using quality control charts from two urine pools, the method can be readily applied to biomonitoring PAH exposure.