Degradation study on the thermally stable nickel phthalocyanine sheet polymer

Poly (nickel phthalocyanine) which has exceptional thermal stability is synthesized. Knowledge of modes of degradation of this polymer is found to be necessary for its high temperature applications. This polymer showed very high thermal stability with maximum polymer decomposition temperatures (PDT_max) of 500 °C in air and 890 °C in N₂, with char yield 93% at 800 °C. Because of its excellent thermal stability, degradation study with MS as well as GC–MS techniques were found to be very difficult. The present publication deals with MS and GC–MS studies of nickel phthalocyanine sheet polymer at high temperatures ranging from 700 to 1000 °C. Tentative mechanisms are proposed for its modes of fragmentations and based on GC–MS studies, the most probable degradation products are identified.     

A simultaneous TG–DTA study of the thermal decomposition of 2-hydroxybenzoic acid, 2-carboxyphenyl ester (salsalate)

Simultaneous thermogravimetry–differential thermal analysis (TG–DTA) and gas and liquid chromatography with mass spectrometry detection have been used to study the kinetics and decomposition of 2-hydroxybenzoic acid, 2-carboxyphenyl ester, commercially known as salsalate. Samples of salsalate were heated in the TG–DTA apparatus in an inert atmosphere (100 ml min⁻¹ nitrogen) in the temperature range 30–500 °C. The data indicated that the decomposition of salsalate is a two-stage process. The first decomposition stage (150–250 °C) had a best fit with second-order kinetics with E_a=191–198 kJ/mol. The second decomposition stage (300–400 °C) is described as a zero-order process with E_a=72–80 kJ/mol. The products of the decomposition were investigated in two ways:

(a)Salsalate was heated in a gas chromatograph at various isothermal temperatures in the range 150–280 °C, and the exit gas stream analyzed by mass spectrometry (GC–MS). This approach suggested that salsalate decomposes with the formation of salicylic acid, phenol, phenyl salicylate, and cyclic oligomers of salicylic acid di- and tri-salicylides.

(b)One gram samples of salsalate were heated in a vessel under nitrogen to 150 °C, and the residues were analyzed by liquid chromatography–mass spectrometry (LC–MS). The major compound detected was a linear tetrameric salicylate ester.

     

Thermal decomposition of high-energy density materials at high pressure and temperature

High-energy density materials (HEDMs) are being investigated for use as propellants in rocket, air-breathing, and combined-cycle applications. These types of materials may be attractive alternatives to conventional propellants because of their high heat of combustion, density, and high strain energy. Because advanced propulsion systems may operate at very high pressure and temperature (>25 atm and temperatures exceeding 500 °C), the thermal decomposition of individual HEDMs is of interest to future fuel system designers. A laboratory-scale flow reactor was used to subject small amounts (approximately 1 ml) of deoxygenated HEDM to controlled conditions of temperature and residence-time-at-temperature at constant pressure (34 atm) in the liquid or supercritical phase. The reactor was 316 stainless steel HPLC tubing. Using an in-line analytical system, as well as off-line chromatographic analysis of products, the thermal stability of the parent material, as well as the thermal fragmentation products of each HEDM was measured. Some of the candidate materials tested (dimethyl-2-azidoethylamine (DAMEZ), quadricyclane, and bicyclopropylidene (BCP)) showed only marginal thermal stability with major decomposition occurring before 400 °C (3 s residence time). Other candidate materials (JP-10, RP-1, RG-1, RJ-6, and RJ-7) showed excellent thermal stability: little decomposition even at 600 °C. Results show the pyrolytic stability of candidate materials relative to each other, and provided insights to the mechanisms of thermal decomposition for specific fuel candidates.     

Effect of reagents mixing on the thermal behavior of sol-gel precursors for silica-based nanocomposite thin films

The paper presents, based on TG-DTG-DSC data, some results of the thermal decomposition of some complex sol-gel precursors used for the deposition of mesoporous ZnO/SiO₂ nanocomposite thin films for gas sensing applications. The effect chemical composition of the sol and reagents mixing during the sol preparation is discussed. The chemical nature of ZnO source (zinc acetate solid salt, zinc acetate alcoholic solution or ZnO nanopowder) used for the sol preparation significantly affects the thermal decomposition of complex precursor and the microstructure and properties of the nanocomposite thin films.     

Thermal decomposition of zinc carbonate hydroxide

This study is devoted to the thermal decomposition of two zinc carbonate hydroxide samples up to 400 °C. Thermogravimetric analysis (TGA), boat experiments and differential scanning calorimetry (DSC) measurements were used to follow the decomposition reactions. The initial samples and the solid decomposition products were analyzed by scanning electron microscopy (SEM), X-ray diffraction (XRD), Fourier transform infrared (FTIR) and laser particle size analyzer. Results showed that zinc carbonate hydroxide decomposition started at about 150 °C and the rate of decomposition became significant at temperatures higher than 200 °C. The apparent activation energies (E_a) in the temperature range 150–240 °C for these two samples were 132 and 153 kJ/mol. The XRD analyses of the intermediately decomposed samples and the DSC results up to 400 °C suggested a single-step decomposition of zinc carbonate hydroxide to zinc oxide with not much change in their overall morphologies.     

Thermal decomposition and X-ray diffraction of sulphate efflorescent minerals from El Jaroso Ravine, Sierra Almagrera, Spain

Two evaporite minerals from the El Jaroso Ravine, Spain have been analysed by thermogravimetry coupled with an evolved gas mass spectrometer. X-ray diffraction results proved the evaporite minerals were a mixture of sulphates including the minerals magnesiocopiapite, coquimbite and possibly alunogen. Thermal decomposition of the unoxidised samples showed steps at 52, 99 and 143 °C confirmed by mass spectrometric results and attributed to adsorbed water, interstitial water and chemically bonded water. This evaporite mineral rock showed two higher temperature decomposition steps at 555 and 599 °C with mass losses of 19.6 and 7.8%. Slightly different temperatures for the thermal decomposition of the oxadada sample were observed at 52, 64.5 and 100 °C. Two higher temperature mass loss steps at 560.5 and 651 °C were observed for the oxidised sample. By comparison of the thermal analysis patterns of halotrichite and jarosite it can be shown that the El Jaroso samples are mineral sulphates and not halotrichite or jarosite.     

Isothermal kinetic analysis of the thermal decomposition of magnesium hydroxide using thermogravimetric data

In the present study, the kinetics of the thermal decomposition of magnesium hydroxide is investigated, using isothermal methods of kinetic analysis. For this purpose, experiments in thermogravimetric analyser were carried out in standard values of temperature (350°, 400°, 450° and 500°C) which resulted in weight loss percent as a function of time. The data were further modified to give fraction reacted ‘' versus time to be tested in various forms of ‘' functions. In order to determine the mechanism of the magnesium hydroxide decomposition and the form of the conversion function which governs the dehydroxylation of Mg(OH)₂, four different methods of isothermal kinetic analysis were used. Applying each of these methods to the data, it was concluded that the nucleation mechanism predominates the Mg(OH)₂, decomposition for all values of temperature tested; at 350°C the kinetic model which represents the experimental data is that of reaction at phase boundaries (random nucleation), F₁: ln(1−)=kt) while for the higher temperatures 400°, 450° and 500°C the kinetic equation of nucleation and development in two dimensions, A₂: [−ln (1−)]^1/2=kt was found to fit better the experimental results. The activation energy was evaluated applying two alternative methods; the Arrhenius plot, using maximum rates of reaction, from which the activation energy was evaluated to be 20.54 kcal/mol. An alternative method based on plots of ln t versus 1/T corresponding to the same value of ‘' gave values of 10.72, 13.82 and 16.31 kcal/mol for ‘' values of 0.25, 0.50 and 0.75, respectively.     

Thermal stability of an explosive detonator

Mercuric 5-nitrotetrazole is a possible replacement for lead azide. The thermal decomposition peak maximum ranged from 185 to 270°C as the heating rate increased from 0.1 to 100°C min⁻¹. The activation energy and frequency factor for thermal decomposition were determined from dynamic and isothermal DSC and isothermal TG data; the average values were 38.8 kcal mol⁻¹ and 3.56×10¹⁴ s⁻¹. A half-life experiment confirmed the kinetic constants and indicated that the decomposition reaction was first order. The heat of explosion was determined by a pressure DSC test and found to be 2587 J g⁻¹. The linear coefficient of expansion was 37±2×10⁻⁶°C⁻¹ from −60 to 160°C and indicated secondary transitions near −10 and 90°C. The specific heat was 0.0003154T+0.1339 in the region −40–90°C. The critical temperature for a slab with a half-thickness of 0.035 cm was calculated to be 232 °C.     

Kinetics and hazards of thermal decomposition of methyl ethyl ketone peroxide by DSC

Differential scanning calorimetry (DSC) was applied to analyze thermal decomposition of methyl ethyl ketone peroxide (MEKPO). Thermokinetic parameters and thermal stability were evaluated. MEKPO decomposes in at least three exothermic decomposition reactions and begins to decompose at 30–32 °C. The total heat of decomposition is 1.26 ± 0.03 kJ g⁻¹. Thermal decomposition of MEKPO can be described by a model of two independent reactions: the first is decomposition of a less stable isomer of MEKPO, followed by decomposition of the main isomer, after which an exothermic reaction of the reaction products with the solvent, dimethyl phthalate. The results can be applied for emergency relief system design and for emergency rescue strategies during an upset or accident.     

Thermogravimetric study of the pyrolysis of waste wood

A thermogravimetric study of the pyrolysis of three different types of waste wood (forest wood, old furniture and used pallets) is carried out in a TGA equipment using dynamic and isothermal techniques. Isothermal runs were carried out at two temperature levels, one between 225° and 325°C (low range) and the other, between 700° and 900°C (high range). Results show a good agreement between the kinetic parameters obtained from either dynamic or isothermal techniques. It must be remarked that the own chemical composition of each type of wood together with the compounds added to the wood for each application, play a fundamental role in the kinetic behavior of their thermal decomposition.     

Synthesis and properties of oxynitrides (La,Sr)Ti(O,N)3 thin films

We report on the synthesis, optical and electrical properties of thin films of La_xSr_(1−x)Ti(O,N)₃, x = 0, 0.25, 0.50, 0.75 and 1. The films were grown by a soft chemistry process from polymeric precursor solutions, which were deposited by spin coating on 100-oriented SrTiO₃ substrates. After drying, the organic matrix was burned at 400 °C. These steps were repeated six times to obtain a reasonable thickness of the films. Afterwards, the samples were heated in a tube furnace at 950 °C in flowing ammonia. The oxynitride films showed different colours from red-orange for LaTiO₂N to greenish-blue for SrTiO₃:N. The films were characterised by X-ray diffraction, scanning electron microscopy, atomic force microscopy, UV–vis spectroscopy, secondary ion mass spectrometry and electrical measurements. The results show that the films are polycrystalline and have the perovskite structure. Their thickness is about 440 nm and the average roughness value is 7.5 nm. UV–vis transmittance measurements showed a strong decrease in the band gap values for the oxynitrides compared to the respective oxides. The values change from approximately 3.2 eV for the oxides to an average value of 2.4 eV for the oxynitrides. The electrical measurements indicate a change in the electrical behaviour from insulator for LaTiO₂N to semiconductor for SrTiO₃:N.     

Density functional theory assessment of the thermal degradation of diclofenac and its calcium and iron complexes

Thermogravimetric analyses of diclofenac sodium, its Ca²⁺ and Fe³⁺ complexes manifested a decreasing trend of the onset decomposition temperatures at which these compounds dissociated. The drop in the temperature was metal ion dependent; the sodium salt showed thermal stability up to 245 °C, whereas the complexes started their degradation processes at temperatures starting from 90 °C. While G* for the cleavage of the acetate moiety in the sodium salt was 63.76 kJmol⁻¹, it was 82.06 and 140.57 kJmol⁻¹ in the cases of Ca²⁺ and Fe³⁺, respectively. However, their complete fusion took place at 187.65, 150.34 and 98.77 °C, respectively, displaying a reversed trend which is probably indicative of some catalytic part on the binding metals.

Using the Gaussian 98 W package of programs, ab initio molecular orbital treatments were applied to diclofenac and its Ca²⁺ and Fe³⁺ metal complexes to study their electronic structure at the atomic level. The thermochemistry of diclofenac sodium was followed through the TG fragmentation peak temperatures using the density functional theory calculations at the 6-31G(d) basis set level. The FT-IR data were in good agreement with the theoretically calculated values.

Single point calculations at the B3LYP/ 6-311G(d) level of theory, were used to compare the geometric features, energies and dipole moments of these compounds to detect the effect of the binding metal ions on the thermal dissociation of their diclofenac complexes.     

Pyrolysis of carbonaceous foundry sand additives: Seacoal and gilsonite

Seacoal and gilsonite are used by the foundry industry as carbonaceous additives in green molding sands. In this study, pyrolysis was used to simulate the heating conditions that the carbonaceous additives would experience during metal casting. Gas chromatography–mass spectrometry was used to tentatively identify major organic products generated during their pyrolysis at 500, 750, and 1000 °C. A number of compounds of environmental concern were identified during the pyrolysis of seacoal and gilsonite, including substituted benzenes, phenolics, and polycyclic aromatic hydrocarbons (PAHs). These thermal decomposition products, and especially PAHs, were generated at each pyrolysis temperature in all foundry sands containing seacoal. In gilsonite-amended sand, however, mainly alkanes and alkenes were identified at 500 and 750 °C and PAHs at 1000 °C. Compared to seacoal, the most intense peaks occurred during the pyrolysis of sand containing gilsonite. The greatest loss of pyrolyzable material also occurred during heating of gilsonite-amended sand from ambient temperature to 1000 °C in a thermogravimetric analyzer. The results obtained from this study will be useful to green sand foundries looking to reduce volatile hydrocarbon emissions.     

Study on the applications of SiC thin films to MEMS techniques through a fabrication process of cantilevers

We have tried to find the most suitable conditions for the deposition process of silicon carbide thin films as a material for MEMS techniques. We have also studied its application to semiconductor processes. To do this, we have tried to fabricate several dimensions of cantilevers with these silicon carbide thin films. High quality silicon carbide thin films are grown by metal-organic chemical vapor deposition (MOCVD). This process employs single molecular precursors such as diethylmethylsilane (DEMS), 1,3-disilabutane (DSB) at a pressure of 1 × 10⁻³ Pa and a growth temperature in the range of 700–1000 °C. Two fabrication methods are tested for initial fabrication of cantilevers. First, deposit SiC thin films on Si based atomic force microscopy (AFM) cantilevers. Second, used the lift-off process. To get three-dimensional cantilever-shaped SiC thin films, moreover, we chemically etched silicon substrate with strong alkaline solution such as TMAH at 80 °C. In addition, a high resolution of probe tips on the cantilevers was achieved using electron-beam deposition in a carbon atmosphere.     

The effect of humidity on thermal process of zinc acetate

The thermal decomposition of zinc acetate dihydrate Zn(CH₃CO₂)₂·2H₂O in some humidity-controlled atmospheres has been successfully investigated by novel thermal analyses, which are sample-controlled thermogravimetry (SCTG), thermogravimety combined with evolved gas analysis using mass spectrometry (TG–MS) and simultaneous measurement of differential scanning calorimetry and X-ray diffractometry (XRD–DSC). The thermal processes of anhydrous zinc acetate in dry gas atmosphere by conventional linear heating experiment initiated with the sublimation around 180 °C, followed by the fusion and the decomposition over 250 °C. SCTG was useful to interpret clearly the successive reaction because the high-temperature parallel decompositions were effectively inhibited. The thermal behavior changed dramatically by introducing water vapor in the atmosphere and the thermal process was quite different from that in dry gas atmosphere. Zinc oxide (ZnO) was formed only in a humidity-controlled atmosphere, and could be easily synthesized at temperatures below 300 °C. XRD–DSC equipped with a humidity generator revealed directly the crystalline change from Zn(CH₃CO₂)₂ to ZnO. A detailed thermal process of Zn(CH₃CO₂)₂·2H₂O and the effect of water vapor are discussed.     

Fabrication of novel threefold shape CeO2 dendrites: Optical and electrochemical properties

Threefold shape CeO₂ dendritic crystals were successfully prepared from a single precursor via a thermal decomposition route. The precursor was synthesized by a hydrothermal reaction using Ce(NO₃)₃6 H₂O with CO(NH₂)₂ at 150 °C in a water–TEA complex solution. The dendritic pattern of precursor almost remained in the as-prepared product. The optical absorption spectrum indicates that the CeO₂ dendrites have a direct band gap of 3.51 eV. The electrochemical tests show that the CeO₂ dendrites are a promising electrode material as they can deliver a large reversible discharge capacity of about 534 mAh g⁻¹.     

Influence of post-annealing temperature on properties of ZnO:Li thin films

Li-doped ZnO thin films were prepared on glass substrates by DC reactive magnetron sputtering. The influence of post-annealing temperature on the electrical, structural, and optical properties of the films was investigated. A conversion from p-type conduction to n-type in a range of temperature was confirmed by Hall measurement. The optimal p-type conduction is achieved at the annealing temperature of 500 °C with a resistivity of 57 Ω cm, carrier concentration of 1.07 × 10¹⁷ cm⁻³ and Hall mobility of 1.03 cm² V⁻¹ s⁻¹. From the temperature-dependent PL analysis, the energy level of Li_Zn acceptor was determined to be 140 meV above the valence band.     

High temperature thermal properties of KH2PO4: Phase transitions and decompositions

Phase transitions and the thermal decomposition of KH₂PO₄ have been examined from room temperature to above 300°C by means of hot-stage microscopy, isothermal gravimetry and differential scanning calorimetry. Phase transitions at 198 and 242°C are confirmed, with corresponding enthalpy changes 4.2 and 2.3 kJ mole⁻¹, but no evidence has been found of a transition reported near 110°C. The thermodynamic and other evidence suggest a structural change at 198°C while the change at 242°C is less profound, perhaps involving only changes in the form of the hydrogen bonding. Thermal decomposition occurs in four stages, under conditions of free vapour escape, with the loss of one-quarter of a mole of water per formula unit of KH₂PO₄ in each stage. The products of each stage of decomposition are tentatively identified.     

Stability of pesticides in plant extracts used as calibrants in the gas chromatographic analysis of residues

The stability of commonly used pesticides in plant sample extracts was evaluated. Matrices differing in the character of coextracts were represented by wheat, oranges and white cabbage. After homogenisation with ethyl acetate and anhydrous sodium sulphate, spiked filtrates were stored for 60 days at 20°C or 40°C. The decrease of concentrations was observed at 20°C after 40 days for chlorothalonil and iprodione in cabbage extracts and some degradation was observed for most organophosphates, iprodione and pirimicarb in orange extracts. At increased temperature (40°C), degradation of most pesticides in the orange and cabbage extracts was observed. No decomposition was noticed for synthetic pyrethroids in all tested extracts. The stability of pesticides in wheat extracts was distinctly higher than that in other extracts. Most pesticides are stable enough to store plant sample extracts several weeks prior to further handling, or to use them as calibrants to avoid matrix-induced enhanced GC response. Some degradation of pesticides, in “pure” ethyl acetate solutions was noticed only for some organophosphates (mevinphos, methamidophos, dichlorvos, heptenophos, pirimiphos-methyl) after 60 days at 40°C.     

Sul-containing fluorinated polyimides for optical waveguide device

Novel sul-containing fluorinated polyimides have been synthesized by the reaction of 2,2′-bis-(trifluoromethyl)-4,4′-diaminodiphenyl sulfide (TFDAS) with 1,4-bis-(3,4-dicarboxyphenoxy)benzene dianhydride (HQDPA), 2,2′-bis-(3,4-dicarboxyphenyl)hexafluoropropane dianhydride (6FDA), 4,4′-oxydiphthalicanhydride (ODPA) or 3,4,3′,4′-biphenyl-tetracarboxylic acid dianhydride (s-BPDA). The fluorinated polyimides, prepared by a one-step polycondensation procedure, have good solubility in many solvents, such as N-methyl-2-pyrrolidinone (NMP), dimethylacetamide (DMAc), dimethyl sulfoxide (DMSO), cyclohexanone, tetrahydrofuran (THF) and m-cresol. The molecular weights (M_n's) and polydispersities (M_n/M_w's) of polyimides were in the range of 1.24 × 10⁵ to 3.21 × 10⁵ and 1.59–2.20, respectively. The polymers exhibit excellent thermal stabilities, with glass-transition temperatures (T_g) at 221–275 °C and the 5% weight-loss temperature are above 531 °C. After crosslinking, these polymers show higher thermal stability. The films of polymers have high optical transparency. The novel sul-containing fluorinated polyimides also have low absorption at both 1310 and 1550 nm wavelength windows. Rib-type optical waveguide device was fabricated using the fluorinated polyimides and the near-field mode pattern of the waveguide was demonstrated.