CO<Subscript>2</Subscript> corrosion inhibition of X-70 pipeline steel by carboxyamido imidazoline

The corrosion inhibition of X-70 pipeline steel in saltwater saturated with CO₂ at 50 °C with carboxyamido imidazoline has been evaluated by using electrochemical techniques. Techniques included polarization curves, linear polarization resistance, electrochemical impedance, and electrochemical noise measurements. Inhibitor concentrations were 0, 1.6 × 10⁻⁵, 3.32 × 10⁻⁵, 8.1 × 10⁻⁵, 1.6 × 10⁻⁴, and 3.32 × 10⁻⁴ mol l⁻¹. All techniques showed that the best corrosion inhibition was obtained by adding 8.1 × 10⁻⁵ mol l⁻¹ of carboxyamido imidazoline. For inhibitor concentrations higher than 8.1 × 10⁻⁵ mol l⁻¹ a desorption process occurs, and an explanation has been given for this phenomenon.     

Production of Lipids Containing High Levels of Docosahexaenoic Acid by a Newly Isolated Microalga, <Emphasis Type="Italic">Aurantiochytrium</Emphasis> sp. KRS101

In the present study, a novel oleaginous Thraustochytrid containing a high content of docosahexaenoic acid (DHA) was isolated from a mangrove ecosystem in Malaysia. The strain identified as an Aurantiochytrium sp. by 18S rRNA sequencing and named KRS101 used various carbon and nitrogen sources, indicating metabolic versatility. Optimal culture conditions, thus maximizing cell growth, and high levels of lipid and DHA production, were attained using glucose (60 g l⁻¹) as carbon source, corn steep solid (10 g l⁻¹) as nitrogen source, and sea salt (15 g l⁻¹). The highest biomass, lipid, and DHA production of KRS101 upon fed-batch fermentation were 50.2 g l⁻¹ (16.7 g l⁻¹ day⁻¹), 21.8 g l⁻¹ (44% DCW), and 8.8 g l⁻¹ (40% TFA), respectively. Similar values were obtained when a cheap substrate like molasses, rather than glucose, was used as the carbon source (DCW of 52.44 g l⁻¹, lipid and DHA levels of 20.2 and 8.83 g l⁻¹, respectively), indicating that production of microbial oils containing high levels of DHA can be produced economically when the novel strain is used.     

Scale up and Application of Biosurfactant from <Emphasis Type="Italic">Bacillus subtilis</Emphasis> in Enhanced Oil Recovery

There is a lack of fundamental knowledge about the scale up of biosurfactant production. In order to develop suitable technology of commercialization, carrying out tests in shake flasks and bioreactors was essential. A reactor with integrated foam collector was designed for biosurfactant production using Bacillus subtilis isolated from agricultural soil. The yield of biosurfactant on biomass (Y _p/x), biosurfactant on sucrose (Y _p/s), and the volumetric production rate (Y) for shake flask were obtained about 0.45 g g⁻¹, 0.18 g g⁻¹, and 0.03 g l⁻¹ h⁻¹, respectively. The best condition for bioreactor was 300 rpm and 1.5 vvm, giving Y _x/s, Y _p/x, Y _p/s, and Y of 0.42 g g⁻¹, 0.595 g g⁻¹, 0.25 g g⁻¹, and 0.057 g l⁻¹ h⁻¹, respectively. The biosurfactant maximum production, 2.5 g l⁻¹, was reached in 44 h of growth, which was 28% better than the shake flask. The obtained volumetric oxygen transfer coefficient (K _L a) values at optimum conditions in the shake flask and the bioreactor were found to be around 0.01 and 0.0117 s⁻¹, respectively. Comparison of K _L a values at optimum conditions shows that biosurfactant production scaling up from shake flask to bioreactor can be done with K _L a as scale up criterion very accurately. Nearly 8% of original oil in place was recovered using this biosurfactant after water flooding in the sand pack.     

Synthesis,Crystal Structure and Raman Spectrum of Hydrazinium(+2) Fluoroarsenate(III) Fluoride,N<Subscript>2</Subscript>H<Subscript>6</Subscript>AsF<Subscript>4</Subscript>F

Summary.  Hydrazinium(+2) fluoroarsenate(III) fluoride was prepared by the reaction of hydrazinium(+2) fluoride and liquid arsenic trifluoride. N₂H₆AsF₄F is stable at 273 K, but decomposes slowly at room temperature. N₂H₆AsF₄F crystallizes in the orthorhombic space group Pnn2 with a = 774.0(2) pm, b = 1629.2(4) pm and c = 436.6(1) pm; V = 0.5506(3) nm³, Z = 4 and d _c  = 2.461 g cm⁻³. The structure consists of N₂H₆ ²⁺ cations, AsF₄ ⁻ anions, and F⁻ anions and is interconnected by a hydrogen bonding network. Distorted trigonal-bipyramidal AsF₄ ⁻ units are very weakly interconnected and form chains along the b axis. Bands in the Raman spectrum are assigned to the vibrations of N₂H₆ ⁺² cations and AsF₄ ⁻ anions. Corresponding author. E-mail: adolf.jesih@ijs.si Received April 18, 2002; accepted July 15, 2002     

A kinetic study of the oxidation of <Emphasis Type="SmallCaps">l</Emphasis>-methionine by water soluble colloidal MnO<Subscript>2</Subscript>

Aqueous solution of water soluble colloidal MnO₂ was prepared by Perez-Benito method. Kinetics of l-methionine oxidation by colloidal MnO₂ in perchloric acid (0.93 × 10⁻⁴ to 3.72 × 10⁻⁴ mol dm⁻³) has been studied spectrophotometrically. The reaction follows first-order kinetics with respect to [H⁺]. The first-order kinetics with respect to l-methionine at low concentration shifts to zero order at higher concentration. The effects of [Mn(II)] and [F⁻] on the reaction rate were also determined. Manganese (II) has sigmoidal effect on the rate reaction and act as auto catalyst. The exact dependence on [Mn(II)] cannot be explained due to its oxidation by colloidal MnO₂. Methionine sulfoxide was formed as the oxidation product of l-methionine. Ammonia and carbon dioxide have not been identified as the reaction products. The mechanism with the observed kinetics has been proposed and discussed.     

Kinetics of Growth and Enhanced Sophorolipids Production by Candida bombicola Using a Low-Cost Fermentative Medium

In this study, effect of various parameters on sophorolipid (SL) production by the yeast Candida bombicola was investigated for the enhancing of its production by employing L18 orthogonal array design of experiments. At optimum conditions of sugarcane molasses 50 g l⁻¹, soybean oil 50 g l⁻¹, inoculum size 5% (v/v), temperature 30 °C, inoculum age 2 days, and agitation 200 rpm, the yeast produced almost equal amounts of the product in batch shake flasks and in a 3-l fermentor without any pH control (45 and 47 g l⁻¹, respectively). However, the yield increased to 60 g l⁻¹ in the fermentor under controlled pH environment. Time course of SL production, yeast biomass growth, and utilization of sugarcane molasses and soybean oil at these optimized conditions were fitted to existing kinetic models reported in the literature. Estimated kinetic parameters from these models suggested that conventional medium containing glucose can very well be replaced with the present low-cost fermentative medium.     

Electrodeposition of Au/nanosized diamond composite coatings

Ultra-dispersed diamond UDD particles were codeposited in gold matrix coatings from a sulphite electrolyte, changing bath load and key operating parameters. The influence of electrolyte pH, current density and bath load on current efficiency, particle co-deposition, surface morphology and microhardness of composite coatings was investigated. UDD incorporation is mainly affected by bath load; however, particle embedding is specifically sensitive to electrolyte pH and deposition current density. The maximum mass fraction of carbon in the coating, about 0.55%, is obtained by depositing from ultrasonically pre-treated electrolytes with UDD concentration 20 g l⁻¹, pH 9.5 and 3 mA cm⁻² . Au/UDD composites are characterised by an increased microhardness and improved wear resistance. When compared to pure gold coatings which are notoriously weak, Au/UDD electrodeposits from sulphite electrolytes represent a significant improvement. Presented at the 4th Baltic Conference on Electrochemistry, Greifswald, 13–16, 2005     

Mixed amphoteric oxide ZrO<Subscript>2</Subscript>-Al<Subscript>2</Subscript>O<Subscript>3</Subscript> as catalyst for the conversion of 2-methyl-3-butyn-2-ol

The TPR spectra of the conversion of 2-methyl-3-butyn-2-ol (MBOH) on mixed ZrO₂-Al₂O₃ oxides with different ZrO₂ contents were obtained by desorption mass spectrometry. It was shown that MBOH is dehydrated to 3-methyl-3-buten-1-yne on the acid centers (H₀ ≥ –3.3) and is decomposed to acetylene and acetone at the basic centers (H_– ≤ +6.8) of this oxide. The formation of acid centers in the amorphous structure of ZrO₂-Al₂O₃ at 1.5 < Al/Zr < 3is explained by the Tanabe rule.     

A kinetic analysis of thermal decomposition of polyaniline/ZrO<Subscript>2</Subscript> composite

Synthesis, characterization and thermal analysis of polyaniline (PANI)/ZrO₂ composite and PANI was reported in our early work. In this present, the kinetic analysis of decomposition process for these two materials was performed under non-isothermal conditions. The activation energies were calculated through Friedman and Ozawa-Flynn-Wall methods, and the possible kinetic model functions have been estimated through the multiple linear regression method. The results show that the kinetic models for the decomposition process of PANI/ZrO₂ composite and PANI are all D₃, and the corresponding function is ƒ(α)=1.5(1−α)^2/3[1−(1-α)^1/3]−1. The correlated kinetic parameters are E _a=112.7±9.2 kJ mol⁻¹, lnA=13.9 and E _a=81.8±5.6 kJ mol⁻¹, lnA=8.8 for PANI/ZrO₂ composite and PANI, respectively.     

FAD-modified SiO2/ZrO2/C ceramic electrode for electrocatalytic reduction of bromate and iodate

SiO₂/ZrO₂/C carbon ceramic material with composition (in wt%) SiO₂ = 50, ZrO₂ = 20, and C = 30 was prepared by the sol–gel-processing method. A high-resolution transmission electron microscopy image showed that ZrO₂ and the graphite particles are well dispersed inside the matrix. The electrical conductivity obtained for the pressed disks of the material was 18 S cm⁻¹, indicating that C particles are also well interconnected inside the solid. An electrode modified with flavin adenine dinucleotide (FAD) prepared by immersing the solid SiO₂/ZrO₂/C, molded as a pressed disk, inside a FAD solution (1.0 × 10⁻³ mol L⁻¹) was used to investigate the electrocatalytic reduction of bromate and iodate. The reduction of both ions occurred at a peak potential of −0.41 V vs. the saturated calomel reference electrode. The linear response range (lrr) and detection limit (dl) were: BrO₃ ⁻, lrr = 4.98 × 10⁻⁵–1.23 × 10⁻³ mol L⁻¹ and dl = 2.33 μmol L⁻¹; IO₃ ⁻, lrr = 4.98 × 10⁻⁵ up to 2.42 × 10⁻³ and dl = 1.46 μmol L⁻¹ for iodate.     

Corrosion behavior of AA2024-T3 alloy treated with phosphonate-containing TEOS

Protection from corrosion of the aluminum alloy AA2024-T3 coated with a tetraethoxysilicate (TEOS)/aminotrimethyllenephosphonic acid (ATMP) film in a 0.05-mol L⁻¹ NaCl solution was evaluated using electrochemical impedance spectroscopy, scanning electron microscopy, energy disperse spectroscopy, and atomic force microscopy. The present work investigates the influence of different pretreatment procedures of the alloy surface and the ATMP concentration on the corrosion resistance of the coated samples. The undoped sol–gel coatings did not provide adequate corrosion protection. The best corrosion protection was achieved using acetic acid pretreatment and subsequent deposition of an ATMP-modified TEOS film with an optimal concentration of 5.00 × 10⁻⁴ mol L⁻¹ in the deposition bath. The acetic acid pretreatment promotes a decrease in galvanic corrosion and the surface enrichment of aluminum favoring the metalosiloxane and the metal–phosphonic bonds with increasing likely reaction sites, thus promoting the formation of a more homogeneous and compact coating with improved resistance.     

Enhanced Production of <Emphasis Type="SmallCaps">l</Emphasis>-Arginine by Expression of <Emphasis Type="Italic">Vitreoscilla</Emphasis> Hemoglobin Using a Novel Expression System in <Emphasis Type="Italic">Corynebacterium crenatum</Emphasis>

Corynebacterium crenatum SYPA 5-5 is an aerobic and industrial l-arginine producer. It was proved that the Corynebacterium glutamicum/Escherichia coli shuttle vector pJC1 could be extended in C. crenatum efficiently when using the chloramphenicol acetyltransferase gene (cat) as a reporter under the control of promoter tac. The expression system was applied to over-express the gene vgb coding Vitreoscilla hemoglobin (VHb) to further increase the dissolved oxygen in C. crenatum. As a result, the recombinant C. crenatum containing the pJC-tac-vgb plasmid expressed VHb at a level of 3.4 nmol g⁻¹, and the oxygen uptake rates reached 0.25 mg A₅₆₂⁻¹ h⁻¹ which enhanced 38.8% compared to the wild-type strain. Thus, the final l-arginine concentration of the batch fermentation reached a high level of 35.9 g L⁻¹, and the biomass was largely increased to 6.45 g L⁻¹, which were 17.3% and 10.5% higher than those obtained by the wild-type strain, respectively. To our knowledge, this is the first report that the efficient expression system was constructed to introduce vgb gene increasing the oxygen and energy supply for l-arginine production in C. crenatum, which supplies a good strategy for the improvement of amino acid products.     

Callus induction and plant regeneration from different explants of Actinidia deliciosa

In this study, an efficient procedure was developed for callus induction and regeneration of kiwifruit (Actinidia deliciosa) using different organs of shoots developed under in vitro conditions. Effects of explants source and media (M₁, 1.0 mg l⁻¹ BA + 2.0 mg l⁻¹ 2,4-D–M₂, 1.0 mg l⁻¹ NAA + 2.0 mg l⁻¹ 2,4-D) on initiation of callus were examined in order to obtain callus for organogenesis. The best callus for plant regeneration was obtained from leaf explants on Murashige and Skoog’s medium (MS) supplemented with M₂. Formation of callus from leaf of kiwifruit (A. deliciosa) was cultured in MS medium containing different concentration of N⁶-benzylaminopurin (BA; 0.0, 1.0, 2.0, 4.0, 6.0, 8.0 mg l⁻¹) for callus proliferation and plant regeneration. Although the first shoot formation was appeared in medium containing 6.0 and 8.0 mg l⁻¹ BA, the best shoots formation was obtained in medium with 4.0 mg l⁻¹ BA.     

Synthesis,structure, and electric properties of oxygen-deficient perovskites Ba<Subscript>3</Subscript>In<Subscript>2</Subscript>ZrO<Subscript>8</Subscript> and Ba<Subscript>4</Subscript>In<Subscript>2</Subscript>Zr<Subscript>2</Subscript>O<Subscript>11</Subscript>

Perovskite phases Ba₃In₂ZrO₈ and Ba₄In₂Zr₂O₁₁ with the nominal concentration of structural oxygen vacancies 1/9 and 1/12, respectively, were synthesized by solid-phase and solution methods. X-ray diffraction showed cubic symmetry of both phases with the unit cell parameter a = 0.4193(2) and 0.4204(3) nm, respectively. The absence of superstructural lines resulted in the conclusion on statistical arrangement of oxygen vacancies. Thermogravimetry and mass spectrometry proved that both phases can reversibly absorb water from gas phase (pH₂O = 2 × 10⁻² atm) with observed correlation between the concentration of oxygen vacancies and amount of absorbed water. The total water amount was up to 0.9 mol per formula unit or, if recalculated for perovskite unit ABO₃, 0.3 and 0.23 mol H₂O, respectively. The temperature curves of coductivity in the atmosphere with various partial water vapor pressures (pH₂O = 3 × 10⁻⁵ and 2 × 10⁻² atm) showed significantly higher conductivity and lower activation energy (0.52 eV) in humid atmosphere due to proton transfer. The proton conductivity is up to 5 × 10⁻⁴ Ohm⁻¹ cm⁻¹ at 300°C for Ba₃In₂ZrO₈ specimen. IR spectrometry showed that protons in the structure exist primarily in OH-groups.     

Oleic acid-assisted preparation of LiMnPO<Subscript>4</Subscript> and its improved electrochemical performance by Co doping

LiMnPO₄, with a particle size of 50–150 nm, was prepared by oleic acid-assisted solid-state reaction. The materials were characterized by X-ray diffraction, field emission scanning electron microscopy, and transmission electron microscopy. The electrochemical properties of the materials were investigated by galvanostatic cycling. It was found that the introduction of oleic acid in the precursor led to smaller particle size and more homogeneous size distribution in the final products, resulting in improved electrochemical performance. The electrochemical performance of the sample could be further enhanced by Co doping. The mechanism for the improvement of the electrochemical performance was investigated by Li-ion chemical diffusion coefficient ( [(D)\tilde]_\textLi ) \left( {{{\tilde{D}}_{\text{Li}}}} \right) and electrochemical impedance spectroscopy measurements. The results revealed that the [(D)\tilde]_\textLi {\tilde{D}_{\text{Li}}} values of LiMnPO₄ measured by cyclic voltammetry method increase from 9.2 × 10⁻¹⁸ to 3.0 × 10⁻¹⁷ cm² s⁻¹ after Co doping, while the charge transfer resistance (R _ct) can be decreased by Co doping.     

Electrochemical corrosion behaviors and corrosion protection properties of Ni–Co alloy coating prepared on sintered NdFeB permanent magnet

In this study, a protective Ni–Co alloy coating was prepared on sintered NdFeB magnet applying electrodeposition technique. A pure nickel coating was also studied for a comparison. The microstructure, surface morphologies, and chemical composition of coatings were investigated using X-ray diffraction, scanning electron microscope, and energy dispersive spectroscopy, respectively. The corrosion protection properties of coatings for NdFeB magnet in neutral 3.5 wt.% NaCl solutions were evaluated by potentiodynamic polarization and electrochemical impedance spectroscopy (EIS) techniques. The microstructure and surface morphologies analysis showed that the addition of cobalt element into matrix metal Ni altered the preferential orientation of pure nickel coating from (2 0 0) crystal face for pure nickel coating to (1 1 1) crystal face for Ni–Co alloy coating, and made the surface morphologies more compact and uniform due to the grain-refining. The results of potentiodynamic polarization test showed that compared with pure nickel coating, Ni–Co alloy coating exhibited much nobler corrosion potential (E _corr) and lower corrosion current density (j _corr), indicating better anticorrosive properties. The long-term immersion test by dint of EIS indicated that the Ni–Co alloy coating still presented high impedance value of 1.9 × 10⁵ Ω cm² with the immersion time of 576 h indicating the excellent anticorrosive properties, and corrosion protection properties of nickel coating for NdFeB magnet practically disappeared with the immersion time of 144 h, which also indicated that the Ni–Co alloy coating provided better corrosion protection properties for the NdFeB magnet compared with nickel coating.     

Effects of particle size on the electrochemical performances of a layered double hydroxide, [Ni<Subscript>4</Subscript>Al(OH)<Subscript>10</Subscript>]NO<Subscript>3</Subscript>

In this paper, the electrochemical performances of a layered double hydroxide, [Ni₄Al(OH)₁₀]NO₃, of different particle sizes are studied. The results show that the particle size of the sample has evident effects on its discharge capacity at high current density, although a larger capacity may be observed for the bigger particles when they are discharged at lower current densities, e.g. 0.2 A g⁻¹. However, the capacity decreases more quickly than that of the sample in smaller particle size when the current density increases. For example, the discharge capacity of the smallest particle remains as high as 180 mAh·g⁻¹ even at very high current density, e.g. 4.0 A g⁻¹. The results also show that long time soaked electrodes in 7 mol l⁻¹ KOH have improved performance, especially for the hydrothermal samples. It also seems that there is an optimal size for materials, which can maintain their performance for longer time.     

Synthesis and supercapacitance of flower-like Co(OH)<Subscript>2</Subscript> hierarchical superstructures self-assembled by mesoporous nanobelts

A facile hydrothermal strategy was first proposed to synthesize flower-like Co(OH)₂ hierarchical microspheres. Further physical characterizations revealed that the flower-like Co(OH)₂ microspherical superstructures were self-assembled by one-dimension nanobelts with rich mesopores. Electrochemical performance of the flower-like Co(OH)₂ hierarchical superstructures were investigated by cyclic voltammgoram, galvanostatic charge–discharge and electrochemical impedance spectroscopy in 3 M KOH aqueous electrolyte. Electrochemical data indicated that the flower-like Co(OH)₂ superstructures delivered a specific capacitance of 434 F g⁻¹ at 10 mA cm⁻² (about 1.33 A g⁻¹), and even kept it as high as 365 F g⁻¹ at about 5.33 A g⁻¹. Furthermore, the SC degradation of about 8% after 1,500 continuous charge–discharge cycles at 5.33 A g⁻¹ demonstrates their good electrochemical stability at large current densities.     

Polarographic Catalytic Wave of Prednisone in the Presence of Persulfate and its Application

 A polarographic catalytic wave of prednisone in the presence of K₂S₂O₈ was observed. The polarographic catalytic wave of prednisone as catalyst was attributed to such chemical reaction parallel to electrode reaction as oxidized the free radical from one electron reduction of the Δ^1,4-3 keto group of prednisone to regenerate the original keto group. The catalytic wave can be used for the determination of prednisone with the help of conventional polarographic equipment, such as linear-potential scan polarograph. In 0.12 mol l⁻¹ HAc-0.08 mol l⁻¹ NaAc-0.014 mol l⁻¹ K₂S₂O₈ (pH 4.6) supporting electrolyte, the second-order derivative peak current of the catalytic wave was rectilinear to prednisone concentration in the range of 3.2 × 10⁻⁷∼1.6 × 10⁻⁵ mol l⁻¹. The detection limit was 8.0 × 10⁻⁸ mol l⁻¹. Received August 6, 2001; accepted April 17, 2002; published online July 22, 2002     

Peculiarities of the Pt(Cu)/C catalyst formation by galvanic displacement of copper in H<Subscript>2</Subscript>PtCl<Subscript>4</Subscript> solutions

Specific features of the formation of a Pt(Cu) catalyst by the galvanic displacement of electroplated copper (carbon support) in a PtCl₄²⁻ solution are considered. The composition, the structure, and electrochemical properties of Pt(Cu) deposits in different stages of displacement are studied by a complex of methods (SEM, TEM, XPS, voltammetry, etc.). The gradual formation of a stable “core(Pt, Cu)-shell(Pt)” structure with the average atomic ratio Pt : Cu ≈ 3 : 1 is observed. The results for PtCl₄²⁻ are compared with the analogous results for PtCl₆²⁻ published earlier. Particularly, the reasons for the differences in the steady state potentials established on the Pt(Cu)_st/C electrode in the presence of PtCl₄²⁻ and PtCl₆²⁻ are discussed.