催化动力学电位法测定痕量亚硝酸根

基于稀硫酸介质中，亚硝酸根对溴酸钾氧化碘化钾有催化作用，用碘离子选择电跟踪I^-，建立了测定痕量亚硝酸根的催化动力学电位法。在适宜条件下，该指示反应为一级反应，反应速度可用电位的变化（ΔE）表示。当时间固定时，ΔE与亚硝酸根浓度在0－0．12mg/L范围内呈线性关系，检出限为2．0μg/L。该法用于水样中痕量亚硝酸根的测定，结果满意。     

测定尿中痕量碘的高锰酸钾-亚砷酸体系催化光度法

在硫酸和磷酸的介质中,碘离子催化高猛酸钾与亚砷酸反应生成的锰（Ⅲ）氧化砷酸的反应,据此建立了催化光度法测定痕量碘的新方法。该法的检出限为0．4μg/L,测定的线性范围为1．0－25．0μg/L。应用该法测定了尿样中痕量碘的含量,获得了满意的结果,测定样品的相对标准偏差（n＝6）为2．5％－3．7％,加标回收率为96．4％－102．6％。     

催化动力学电位法测定甲醛

基于硫酸介质中，甲醛对溴酸钾氧化碘化钾的促进作用，用碘离子选择电极跟踪Ⅰ^-，建立了测定微量甲醛的动力学电位法。方法的线性范围为0～5mg/L，检出限为0．055mg／L。利用此法测定了废水和空气中的甲醛含量，结果满意。     

断续流动注射-催化原子荧光光谱法测定碘

基于碘对亚砷酸-硫酸铈的催化反应，断续流动进样，用氢化物发生．原子荧光光谱法直接测定As(Ⅲ）的浓度变化，建立了微量碘间接测定的方法。在实验条件下，碘离子的线性范围为0．80μg/L；相对标准偏差为2．3％；检测限为4μg/L．加标回收率为92．5％-98．2％。测定结果与硫氰酸铁-亚硝酸催化动力学法相比具有很好的一致性。     

荧光动力学分析法测定痕量鞣酸

基于鞣酸对Cu（Ⅱ）催化过氧化氢氧化罗丹明B具有活化作用，提出了一种简单、高灵敏度的荧光动力学测定痕量鞣酸的新方法。该方法的线性范围为0．04-0．72mg/L;检出限为0．025mg/L.该方法已成功地用于茶叶中鞣酸含量的测定．并与Folin—Ciocalteu光度法作了对照。     

催化光度法测定痕量对苯二酚

在硫酸介质中，以草酸为活化剂，痕量对苯二酚对碘酸钾氧化天青Ⅱ的褪色反应具有明显的催化作用，据此建立了催化光度法测定痕量对苯二酚的新方法。方法的线性范围是0．04～1．20mg／L，检出限为0．008mg／L。方法操作简便，灵敏度高，选择性好，用于自来水、实验室废水和显影液中对苯二酚的测定，结果满意。     

高碘酸钾氧化酚藏花红褪色催化动力学光度法测定食品中的痕量亚硝酸根

基于在硫酸介质中,亚硝酸根对高碘酸钾氧化酚藏花红褪色反应具有较强的催化作用,建立了测定痕量亚硝酸根的催化动力学光度法。线性范围为0．12～1．22mg/L,相关系数为0．9990,检出限为0．016mg／L。用于食品中痕量亚硝酸根的测定,测定结果的相对标准偏差为2、6％～4．2％,回收率为97％．103％。     

动力学光度法测定痕量甲醛

在稀硫酸溶液中,痕量甲醛对氯酸钾氧化玫瑰桃红R褪色反应有催化作用，研究了其动力学条件，测定了动力学反应参数，建立了测定痕量甲醛的动力学光度分析新方法，线性范围为0．02—0．5mg／L，检出限为8．0μg/L；灵敏度较高，选择性较好；该法用于新建住宅室内空气及建筑粘合剂中痕量甲醛的测定，结果满意。     

阻抑速差催化光度法测定痕量色氨酸和酪氨酸

研究了色氨酸、酪氨酸在硫酸环境中抑制碘对亚砷酸与硫酸铈氧化还原反应的催化作用及动力学条件。在0．001mol／L Ce(SO4)2,0．00125mol／L As2O3,0．013mg／L KI,0．025g／L和0．25g／L NaCl溶液中测定色氨酸和酪氨酸,其线性范围分别为0．0～0．65mg／L,0．0～4．0mg／L和0．0～1．3mg／L。0．10～4．0mg／L,用联立方程分别求出各自含量。用此法对醇溶蛋白质和混合氨基酸溶液中色氨酸和酪氨酸进行测定,混合氨基酸的色氨酸、酪氨酸测量值为0．8037g／L,3．591g/L;蛋白质的色氨酸、酪氨酸测量值为1．8g/kg、3．43g/kg;回收率在88％～109％;色氨酸和酪氨酸的RSD分别为4．8％和5．2％,结果满意。     

废水中痕量酚的流动注射停流-催化光度法测定

基于在硫酸介质中痕量酚对溴酸钾氧化罗丹明B反应的催化作用,建立了测定痕量酚的快速、简便的流动注射流－催化光度分析的新方法。该方法的线性范围为0．60－4．00mg/L,检出限为0．1mg/L,进样频率为34／h。11次重得测定的相对标准偏差小于2．0％。该法用于废水中酚的测定,并与4－氨基安替比林比色法对照,结果满意。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Copper catalyzed/mediated synthetic methodology for ebselen and related isoselenazolones

Scope of the copper catalyzed/mediated selenium-nitrogen coupling reaction has been studied for the synthesis of isoselenazolones. It is noticed that the 2-chloro, 2-bromo-, and 2-iodo-aryl amides substrates can be exploited in the selenium-nitrogen coupling reaction by employing 25-100 mol % of CuI/1,10-phenanthroline (L) and potassium carbonate as a base in DMF. Furthermore, electron rich 2-chloro-arylamides also underwent selenium-nitrogen coupling reaction to give biologically important selenium-nitrogen heterocycles. Also, copper-catalyzed selenium-nitrogen coupling reaction has been meticulously applied for the synthesis of diaryl diselenides having methoxy, amine, and amide functionality from respective aryl iodides in the presence of stoichiometric amount of succinimide as an external Se-N coupling partner.     

Knoevenagel condensation catalyzed by novel Nmm-based ionic liquids in water

A series of novel N-methyl morpholine (Nmm) based ionic liquids with 1,2-propanediol group were synthesized and used as catalysts for Knoevenagel condensation at room temperature in water. Under the effect of the catalyst, various aldehydes or aliphatic ketones could react with a wide range of activated methylene compounds well, including malononitrile, alkyl cyanoacetate, cyanoacetamide, β-diketone, barbituric acid, 2-arylacetonitrile and thiazolidinedione. Furthermore, most of the products could be separated just by filtrating and washing with water. Additionally, the catalyst is recyclable and applicable for the large-scale synthesis.     

Construction of polyheterocyclic spirotetrahydrothiophene derivatives via sulfa-Michael/aldol cascade reaction

A series of polyheterocyclic spirotetrahydrothiophene derivatives were obtained in moderate to excellent yields via a catalyst-free sulfa-Michael/aldol cascade reaction of chalcones 1 and commercially available 1,4-dithiane-2,5-diol 2 under mild conditions. We also present the first asymmetric sulfa-Michael/aldol cascade reaction of chalcones 1 and commercially available 1,4-dithiane-2,5-diol 2 with moderate to good enantioselectivities catalyzed by readily available chiral phase-transfer catalysts (PTCs).     

Suzuki-Miyaura reactions of the soluble guanylate cyclase inhibitor NS2028: a non-product specific route to C-8 substituted analogues

Both soluble guanylate cyclase (sGC) inhibitors ODQ 1 and NS2028 2 are synthesized via improved protocols. In the former case treating 3,4-dihydroquinoxalin-2(1H)-one oxime 8, which can be prepared in two steps from 1,2-benzenediamine, with 1,1′-carbonyldiimidazole (CDI) gives the dihydro-ODQ 10 that in the presence of KMnO₄ oxidises to give ODQ 1 in an overall yield of 46% starting from 1,2-benzenediamine. In the latter case, the synthesis affords NS2028 2 from 2-amino-4-bromophenol 3 in three steps with an overall yield of 85% and avoids the need for chromatography. Furthermore, Suzuki-Miyaura reaction conditions are described that enable the preparation of 8-aryl and 8-heteroaryl derivatives of NS2028 directly from NS2028 2. Finally, demethylation of the 8-(methoxyphenyl) substituted analogues afforded the 8-(hydroxyphenyl) derivatives 40-42. All new products are fully characterised.