Testing of mass filtered,time dilated,time-of-flight mass spectrometry

The Naval Research Laboratory’s Trace Element AMS system’s use of a Pretzel magnet as a recombinator and mass filter offers a unique opportunity to study a new type of time-of-flight (TOF) spectrometry. Mass filtering prior to TOF analysis removes extraneous species, shortening the analysis time for a single beam pulse, thereby improving the duty cycle. Time dilation results from a longer flight path for a heavier mass in the Pretzel magnet. Computer TOF simulations of these factors and the resulting impact on mass resolution for high mass atomic and molecular species are discussed. Initial measurements of carbon and silicon to confirm the validity of the model are presented.     

Electron impact ionization mass spectrometry and tandem mass spectrometry of phenylalkylpyridazines

The mass spectrometric fragmentation behaviour of pyridazine and four monosubstituted derivatives containing a pbenylalkyl side-chain (3- and 4-benizylpyridazine, 3- and 4-(2-pbenylethyl)pyridazine) was investigated. In the electron impact ionization mess spectra of the 3-substituted compounds abundant [M – H]⁺ peaks are observed. This allows a clear distinction between 3- and 4-substituted pyridazines, as the spectra of the latter isomers show only very weak [M – H]⁺ signals. The stability of [M – H]⁺ ions derived from 3-alkylpyridazines (deduced from only the very low abundance of further fragment ions) gives strong evidence for a cyclic structure of these ions. One fragmentation pathway typical of the parent pyridazine, the [M - N₂] fragmentation, was not detectable with any of the phenylalkylpyridazines investigated. Instead, loss of HCN, H₃CN⁺ and N²H⁺ was observed. An interesting fragmentation, observed with 3-(2-phenylethyl)pyridazine, is the loss of ⁺CH₃ from the molecular ion and also from the [M – H]⁺ ion.     

Electrospray mass spectrometry and tandem mass spectrometry of bimetallic oxovanadium complexes

A series of six bimetallic oxovanadium complexes (1-6; only one was purified) were investigated by electrospray quadrupole time-of-flight tandem mass spectrometry (ESI-QTOF-MS/MS) in negative-ion mode. Radical molecular anions [M](.-) were observed in MS mode. Fragmentation patterns of [M](.-) were proposed, and elemental compositions of most of the product ions were confirmed on the basis of the high-resolution ESI-CID-MS/MS spectra. A complicated series of low-abundance product ions similar to electron impact (EI) ionization spectra indicated the radical character of the precursor ions. Fragment ions at m/z 214, 200, and 182 seem to be the characteristic ions of bimetallic oxovanadium complexes. These ions implied the presence of a V-O-V bridge bond, which might contribute to stabilization of the radical. To obtain more information for structural elucidation, three representative bimetallic oxovanadium complexes (1-3) were analyzed further by MS in positive-ion mode. Positive-ion ESI-MS produced adduct ions of [M + H](+), [M + Na](+), and [M + K](+). The fragmentation patterns of [M + Na](+) were different than those of radical molecular anions [M](.-). Relatively simple fragmentation occurred for [M + Na](+), possibly due to even-electron ion character. Negative-ion MS and MS/MS spectra of the hydrolysis product of Complex 1 supported these finding, in particular, the existence of a V-O-V bridge bond.     

Quantitative mass spectrometry by internal standardisation using a single focusing mass spectrometer and the peak switching facilities of a peak matching device

A quantitative mass spectrometric method for the determination of small sample sizes is described. This method is applicable to both single and double focusing mass spectrometers, if a conventional peak matching device or any other suitable peak switching facility is attached to the instrument. In the conventional integrated ion current technique a constant pressure of the vapour of hepta-cosafluoro-tri-n-butylamine or a comparable standard is maintained in the analyser. By contrast to this in our method the calibrating substance is evaporated together with the sample from the same capillary of the probe. Substances with a similar chemical structure (in most cases higher or lower homologues) can be used as internal standards. Since thermal effects in the probe and sensitivity changes of the mass spectrometer during the flash evaporation of the substances affect the integrated ion current curves of both sample and standard equally, the ratio of the curves is largely independent of these parameters. With a single focusing mass spectrometer (CH-5 Varian, MAT) reproducibilities of the determinations were within ±10%, with substance amounts in the range between 10^?10 to 10^?11 mole.     

Atmospheric pressure chemical ionization of fluorinated phenols in atmospheric pressure chemical ionization mass spectrometry, tandem mass spectrometry, and ion mobility spectrometry

Atmospheric pressure chemical ionization (APCI)-mass spectrometry (MS) for fluorinated phenols (C6H5-xFxOH Where x = 0-5) in nitrogen with Cl- as the reagent ion yielded product ions of M Cl- through ion associations or (M-H)- through proton abstractions. Proton abstraction was controllable by potentials on the orifice and first lens, suggesting that some proton abstraction occurs through collision induced dissociation (CID) in the interface region. This was proven using CID of adduct ions (M Cl-) with Q2 studies where adduct ions were dissociated to Cl- or proton abstracted to (M-H)-. The extent of proton abstraction depended upon ion energy and structure in order of calculated acidities: pentafluorophenol > tetrafluorophenol > trifluorophenol > difluorophenol. Little or no proton abstraction occurred for fluorophenol, phenol, or benzyl alcohol analogs. Ion mobility spectrometry was used to determine if proton abstraction reactions passed through an adduct intermediate with thermalized ions and mobility spectra for all chemicals were obtained from 25 to 200 degrees C. Proton abstraction from M Cl- was not observed at any temperature for phenol, monofluorophenol, or difluorophenol. Mobility spectra for trifluorophenol revealed the kinetic transformations to (M-H)- either from M Cl- or from M2 Cl- directly. Proton abstraction was the predominant reaction for tetra- and penta-fluorophenols. Consequently, the evidence suggests that proton abstraction occurs from an adduct ion where the reaction barrier is reduced with increasing acidity of the O-H bond in C6H5-xFxOH.     

Potential of capillary electrophoresis, tandem mass spectrometry and coupled capillary electrophoresis-tandem mass spectrometry as diagnostic tools

Urine and blood samples from patients with known metabolic disorders have been analyzed by CE, MS-MS and CE-MS-MS. For the identification of defects in acylcarnitine metabolism, blood spots on filter paper were analyzed using an MS-MS "neonatal screening" approach. Direct CE-MS-MS analysis was used for the analysis of urine samples from patients with different metabolic disorders, including galactosemia, neuroblastoma, Zellweger syndrome, propionic acidemia and alcaptonuria. The sensitivity of the CE-MS-MS method was increased by use of multiple reaction monitoring.     

A novel isotope analysis of oxygen in uranium oxides: comparison of secondary ion mass spectrometry,glow discharge mass spectrometry and thermal ionization mass spectrometry

The natural variation of the oxygen isotopic composition is used among geologists to determine paleotemperatures and the origin of minerals. In recent studies, oxygen isotopic composition has been recognized as a possible tool for identification of the origin of seized uranium oxides in nuclear forensic science. In the last 10 years, great effort has been made to develop new direct and accurate n(¹⁸O)/n(¹⁶O) measurements methods. Traditionally, n(¹⁸O)/n(¹⁶O) analyses are performed by gas mass spectrometry. In this work, a novel oxygen isotope analysis by thermal ionization mass spectrometry (TIMS), using metal oxide ion species (UO⁺), is compared to the direct methods: glow discharge mass spectrometry (GDMS) and secondary ion mass spectrometry (SIMS). Because of the possible application of the n(¹⁸O)/n(¹⁶O) ratio in nuclear forensics science, the samples were solid, pure UO₂ or U₃O₈ particles. The precision achieved using TIMS analysis was 0.04%, which is similar or even better than the one obtained using the SIMS technique (0.05%), and clearly better if compared to that of GDMS (0.5%). The samples used by TIMS are micrograms in size. The suitability of TIMS as a n(¹⁸O)/n(¹⁶O) measurement method is verified by SIMS measurements. In addition, TIMS results have been confirmed by characterizing the n(¹⁸O)/n(¹⁶O) ratio of UO₂ sample also by the traditional method of static vacuum mass spectrometry at the University of Chicago.     

Identification of the 'wrong' active pharmaceutical ingredient in a counterfeit Halfan drug product using accurate mass electrospray ionisation mass spectrometry,accurate mass tandem mass spectrometry and liquid chromatography/mass spectrometry

Methodology is presented for identifying an unknown active (pharmaceutical) ingredient (AI) in a counterfeit drug product. A range of mass spectrometric techniques, i.e., accurate mass mass spectrometry, tandem mass spectrometry (MS/MS) and liquid chromatography/mass spectrometry (LC/MS), has been employed to determine the AI in a counterfeit Halfan suspension, an antimalarial drug. In particular, use of LockSpray accurate mass MS/MS allowed identification of parts of the molecule from fragments, hence limiting the number of possible elemental compositions for the nominal mass of 278 found for the AI in the counterfeit product. The analysis of the isotope pattern observed for the protonated molecule further reduced the number of possible elemental compositions. A literature search for readily commercially available compounds of molecular formula C(12)H(14)N(4)O(2)S suggested that the AI was either sulfamethazine or sulfisomidine. An LC/MS separation of those two compounds and reference MS/MS spectra obtained for sulfamethazine and sulfisomidine led to the conclusion that the AI in the counterfeit Halfan suspension is sulfamethazine, which is an antibacterial agent.     

Evolution of an open-access quantitative bioanalytical mass spectrometry service in a drug discovery environment

Increased demand for assays for compounds at the early stages of drug discovery within the pharmaceutical industry has led to the need for open-access mass spectrometry systems for performing quantitative analysis in a variety of biological matrices. The open-access mass spectrometers described here are LC/MS/MS systems operated in 'multiple reaction monitoring' (MRM) mode to obtain the sensitivity and specificity required to quantitate low levels of pharmaceutical compounds in an excess of biological matrix. Instigation of these open-access systems has resulted in mass spectrometers becoming the detectors of choice for non-expert users, drastically reducing analytical method development time and allowing drug discovery scientists to concentrate on their core expertise of pharmacokinetics and drug metabolism. Setting up an open-access facility that effectively allows a user with minimal mass spectral knowledge to exploit the MS/MS capability of triple quadrupole mass spectrometers presents a significantly different challenge from setting up qualitative single stage mass spectrometry systems. Evolution of quantitative open access mass spectrometry within a pharmaceutical drug metabolism and pharmacokinetics group, from its beginnings as a single generic system to a series of specialist fully integrated walk-up facilities, is described.     

Field desorption mass spectrometry,fast atom bombardment mass spectrometry and fast atom bombardment tandem mass spectrometry of echinacoside,the main caffeoyl-glycoside from Echinacea angustifolia roots (Asteraceae)

The mass spectral fragmentation of echinacoside, a pharmacologically active caffeoyl-glycoside isolated from Echinacea angustifolia roots, has been investigated using different soft-ionization techniques, field desorption and fast atom bombardment (positive and negative ions) mass Spectrometry. Both ionization modes are successful in molecular mass determination and furnish approximately equivalent structural information. A fast atom bombardment tandem mass spectrometry approach (negative ions) was developed for the study of the fragmentation pathways and for the detection of echinacoside in crude plant extracts. The results demonstrate the usefulness of this technique for the rapid search of this important caffeoyl-glucoside directly in natural complex matrices.     

Comparison of laser microprobe mass spectrometry and fast-atom-bombardment mass spectrometry for organic analysis

Both the techniques mentioned provide molecular weight and structural information, but laser microprobe mass spectrometry (LMMS) also provides greater control over the degree of fragmentation and enhanced sensitivity. In addition, LMMS allows microprobe analysis (i.e., spatial resolution of a few μm²) as well as providing quantitative measurements. The less energetic nature of fast-atom-bombardment mass spectrometry (FAB-MS) makes it more suitable for the analysis of highly labile polar compounds and high-mass biopolymers.     

Comparison of flow injection analysis electrospray mass spectrometry and tandem mass spectrometry and electrospray high-field asymmetric waveform ion mobility mass spectrometry and tandem mass spectrometry for the determination of underivatized amino acids

Twenty proteinogenic amino acids (AAs) were determined without derivatization using flow injection analysis followed by electrospray ionization mass spectrometry and tandem mass spectrometry (ESI-MS and ESI-MS/MS) and electrospray ionization high-field asymmetric waveform ion mobility mass spectrometry and tandem mass spectrometry (ESI-FAIMS-MS and ESI-FAIMS-MS/MS), in positive and negative ionization modes. Three separate sets of ESI-FAIMS conditions were used for the separation and detection of the 20 AAs. Typically ESI-FAIMS-MS showed somewhat improved sensitivity and significantly better signal-to-noise ratios than ESI-MS mainly due to the elimination of background noise. However, the difference between ESI-FAIMS-MS and ESI-MS/MS was significantly less. ESI-FAIMS was able to partially or completely resolve all the isobaric amino acid overlaps such as leucine, isoleucine and hydroxyproline or lysine and glutamine. Detection limits for the amino acids in ESI-FAIMS-MS mode ranged from 2 ng/mL for proline to 200 ng/mL for aspartic acid. Overall, ESI-FAIMS-MS is the preferred method for the quantitative analysis of AAs in a hydrolyzed yeast matrix.     

Time-of-flight mass spectrometric analysis of ion formation in hypervelocity impact of organic polymer microspheres: comparison with secondary ion mass spectrometry, (252)Cf mass spectrometry and laser mass spectrometry

Unisized 1.6-microm polystyrene microspheres coated with PEDOT (polyethylene-dioxythiophene) were accelerated to speeds of 6-16 km/s and shot onto a silver target. Either positive or negative ions, both instantaneously formed by the impact process, have been analyzed by time-of-flight mass spectrometry (TOF). Apparently, the processes that control the formation of ions of either polarity depend on the impact velocity. Comparing the results with those of secondary ion mass spectrometry with primary ion energy in both the elastic and the inelastic ((252)Cf-MS) energy loss regimes, some reaction mechanisms of the polymer ions for different energy densities could be elucidated. Some aspects of ion formation are also related to those found in pulsed laser ion generation from these microspheres. This investigation was performed in order to further improve the method of analyzing the organic fraction of interstellar, interplanetary, and cometary dust particles impinging on the targets of the "CIDA" time-of-flight (TOF) mass spectrometers on-board the NASA comet missions "STARDUST" and "CONTOUR".     

Analytical information from mass spectrometry,past and future

Two basic reasons are proposed for the tremendous success and future promise of mass spectrometry: (1) the unusually high volume of data obtainable from unusually small samples and (2) the success in converting these data into structural and quantitative information. The ion abundance dimension of mass spectrometric data is remarkable in its pico-to-ttogram sensitivity and >10⁶ dynamic range, and the mass scale dimension is uniquely high in the number of resolution increments for larger molecule ionization and high resolution. Additional dimensions of data arise from chromatographic coupling to mass spectrometry and tandem mass spectrometry, as well as from alternative ionization and ion reaction methods. Converting these data into chemical information is equally important. Past progress in these areas has been cyclical; for the immediate future a greater research emphasis is urged to convert data to information through better understanding of the relevant chemistry and better utilization of modern computer methods.     

Analysis of estrogens in river sediments by liquid chromatography-electrospray ionisation mass spectrometry. Comparison of tandem mass spectrometry and time-of-flight mass spectrometry

A method has been developed and optimised for the determination of two natural estrogens, estrone (E1) and 17beta-estradiol (E2), and one synthetic estrogen, 17alpha-ethynylestradiol (EE2), in river sediments at the sub-ng/g level. This procedure includes microwave-assisted solvent extraction (MASE), solid-phase extraction and high-performance liquid chromatography-tandem mass spectrometry (LC-MS/MS) with electrospray ionisation. Using sediments spiked with the three estrogens at 10 ng/g wet weight, efficient extraction (>92%) of all the three analytes was achieved by MASE, and whole-procedure recoveries ranged from 82 to 98%. Optimisation of the LC separation allowed for substantial reduction of ionisation suppression in the electrospray source to a final level of <18% suppression. Time-of-flight mass spectrometry (TOF-MS) and MS/MS were compared for the analysis of sediment extracts, with the latter technique proving to be the most selective. The method detection limits achieved by LC-MS/MS were 15, 30 and 40 pg/g for E1, E2 and EE2, respectively, which were 13-fold lower than those obtained by LC-TOF-MS. Analysis of river sediments collected from the River Ouse, UK, showed the presence of the natural estrogens at sub-ng/g level. E1 levels ranged from 0.40 ng/g (dry weight) to 3.30 ng/g while E2 levels ranged from <0.03 to 1.20 ng/g and EE2 was never detected (<0.04 ng/g).     

Pyrolysis–gas chromatography mass spectrometry and field ionization mass spectrometry of polyquinones

Low- and high-molecular mass thermal decomposition products of five polyquinones with different linking aromatic structures have been analyzed by pyrolysis–gas chromatography and by direct (in-source) pyrolysis–field ionization mass spectrometry. The quantity of carboxyl groups present in the polymer is obtained by the amounts of carbon dioxide found by pyrolysis–gas chromatography. Assuming a radical thermal decomposition mechanism the distribution of ketoacidic and quinonoid segments along the macromolecular ladder could be estimated from the high-molecular mass products measured by pyrolysis–field ionization mass spectrometry. A random distribution of the two different segments was found for polyquinones with biphenylene and dibenzofuran subunits, while a structure built up of blocks of two or more identical segments was obtained for polyquinones with dibenzothiophene and diphenylmethane subunits. At the same time the anomalous structural moieties in the polyquinone ladders are also clarified with the help of the identification of the unexpected pyroysis products. Oxidated and bis-dibenzothiophene and bis-diphenylmethane subunits were found. The observed temperature dependence for the appearances of the thermal degradation products indicates that condensation and elimination reactions are taking place under the described pyrolysis conditions. Condensation in the ketoacidic segments forming new quinonoid segments proved to be important in the polymer which was a 100% poly(ketoacid), but negligible in the polyquinones containing ketoacidic segments up to 60%.     

Analysis of sulfobutyl ether-beta-cyclodextrin mixtures by ion-spray mass spectrometry and liquid chromatography-ion-spray mass spectrometry

A comparison is made of the retention properties of additives applied as positively charged pseudo-stationary phases for electrokinetic chromatography of neutral analytes. All additives have a quaternary ammonium as functional group. The polymeric additive [poly(N,N,N',N'-tetramethyl-N-trimethylenehexamethylenediammonium), Polybrene] has a concentration of 2% (w/w) in the background electrolyte (acetate, pH 5.2). Monomeric octyltrimethylammonium (OTMA) was used at a concentration below or above its critical micelle concentration (CMC) (140 mmol/l). At a concentration (259 mmol/l) above the CMC the system is that normally used for micellar electrokinetic chromatography with cationic micelles. However, even below the CMC, where OTMA is present as monomer, retention of the neutral analytes is observed as well. In all systems coating of the capillary wall with Polybrene establishes an electroosmotic flow directed towards the anode, counter-migrating to the electrophoretic movement of the additive. Based on the measurement of the mobility of the analytes (15 small, monofunctional aromatic compounds with different functional groups), their capacity factors, k(i), were determined in all systems. Low correlation of the k(i) values is observed between the particular systems, indicating their different selectivity at least for individual pairs of analytes. Based on the log k(i) values, a linear free energy relationship was applied to elucidate the main types of chemical interaction responsible for retention. As a result, cavity formation and n or pi electron interactions were found being significant for the micellar OTMA system, which agrees with findings described in the literature for other (cationic and anionic) micellar systems. For the polymeric system and for the monomeric OTMA system, the significant retention parameter is indicating n and pi electron interactions.