A new phosphor with flower-like structure and luminescent properties of Sr<Subscript>2</Subscript>MgSi<Subscript>2</Subscript>O<Subscript>7</Subscript>: Eu<Superscript>2+</Superscript>, Dy<Superscript>3+</Superscript> long afterglow materials by sol–gel method

The flower-like phosphors of Sr₂MgSi₂O₇: Eu²⁺, Dy³⁺ with high brightness and long afterglow were obtained by sol–gel method. X-ray diffraction pattern (XRD) shows that single-phased Sr₂MgSi₂O₇ phosphor is prepared by sol–gel method under 1250 °C. Scanning electron microscope (SEM) indicates that the phosphor consists of nano-sized whiskers which are detected for the first time in Eu²⁺ and Dy³⁺ co-doped long-lasting phosphorescence silicates. Furthermore, the investigation on the mechanism indicates that the internal structure and gas, liquid and solid phase effect play important roles in the formation of flower-like Sr₂MgSi₂O₇: Eu²⁺, Dy³⁺ nanostructure. Finally, the optical properties of flower-like Sr₂MgSi₂O₇ nanostructure have been characterized by photoluminescence (PL) spectra.     

Optical energy storage properties of Sr<Subscript>2</Subscript>MgSi<Subscript>2</Subscript>O<Subscript>7</Subscript>:Eu<Superscript>2+</Superscript>,R<Superscript>3+</Superscript> persistent luminescence materials

The details of the mechanism of persistent luminescence were probed by investigating the trap level structure of Sr₂MgSi₂O₇:Eu²⁺,R³⁺ materials (R: Y, La-Lu, excluding Pm and Eu) with thermoluminescence (TL) measurements and Density Functional Theory (DFT) calculations. The TL results indicated that the shallowest traps for each Sr₂MgSi₂O₇:Eu²⁺,R³⁺ material above room temperature were always ca. 0.7 eV corresponding to a strong TL maximum at ca. 90 °C. This main trap energy was only slightly modified by the different co-dopants, which, in contrast, had a significant effect on the depths of the deeper traps. The combined results of the trap level energies obtained from the experimental data and DFT calculations suggest that the main trap responsible for the persistent luminescence of the Sr₂MgSi₂O₇:Eu²⁺,R³⁺ materials is created by charge compensation lattice defects, identified tentatively as oxygen vacancies, induced by the R³⁺ co-dopants.     

UV excited green luminescence of SrAl<Subscript>2</Subscript>O<Subscript>4</Subscript>:Eu<Superscript>2+</Superscript>, Dy<Superscript>3+</Superscript> nanophosphor

Eu, Dy co-doped strontium aluminate nanophosphors were prepared by the combustion synthesis method. Their structure and morphology were investigated by X-ray diffraction (XRD), scanning electron microscopy, transmission electron microscopy (TEM), and Fourier transform infrared spectroscopy. According to the XRD and the TEM analysis, the average crystallite size was found to be in the nanometer range. The phase structure of the prepared nanophosphor is consistent with a standard monoclinic phase with a space group P2₁. The prepared SrAl₂O₄:Eu²⁺, Dy³⁺ nanophosphor emitted green light with a peak at 510 nm showing blue shift, which is due to the reduction in the particle size. Two distinct peaks were observed in the ML intensity versus time curve. The two peaks in ML indicate the presence of charge transfer in an ML process.     

Effects of boric acid on structural and luminescent properties of BaAl<Subscript>2</Subscript>O<Subscript>4</Subscript>:(Eu<Superscript>2+</Superscript>, Dy<Superscript>3+</Superscript>) phosphors

Eu²⁺/Dy³⁺-codoped BaAl₂O₄ phosphors were prepared by conventional solid-state reaction with boric acid flux. The effects of boric acid on structural and luminescent properties of BaAl₂O₄:(Eu²⁺, Dy³⁺) were investigated. The crystallinity of BaAl₂O₄ improved with increasing amount of H₃BO₃. Incorporation of Eu²⁺ and Dy³⁺ ions into effective lattice sites was promoted by H₃BO₃ addition. As a result, Eu²⁺ emission in BaAl₂O₄ was greatly enhanced by H₃BO₃, and the duration of persistent luminescence increased with the amount of H₃BO₃. However, the decay lifetime of persistent luminescence was not strongly influenced by the amount of H₃BO₃.     

Photocatalysis enhancement of CaAl<Subscript>2</Subscript>O<Subscript>4</Subscript>:Eu<Superscript>2+</Superscript>, Nd<Superscript>3+</Superscript>@TiO<Subscript>2</Subscript> composite powders

CaAl₂O₄:Eu²⁺, Nd³⁺@TiO₂ composite powders were synthesized by a sol–gel method under mild conditions (i.e. low temperature and ambient pressure). The as-prepared powders were characterized by transmission electron microscopy (TEM) and analyzed by X-ray diffraction (XRD). The photocatalytic behavior of the TiO₂-base surfaces was evaluated by the degradation of nitrogen monoxide gas. It suggested that CaAl₂O₄:Eu²⁺, Nd³⁺@TiO₂ composite powders were composed of anatase titania and that CaAl₂O₄:Eu²⁺, Nd³⁺. TiO₂ particles were deposited on the surface of CaAl₂O₄:Eu²⁺, Nd³⁺ to form uniform film. CaAl₂O₄:Eu²⁺, Nd³⁺@TiO₂ composite powders exhibited higher photocatalytic activity compared with pure TiO₂ under visible light. And the result also clearly indicated that the long afterglow phosphor absorbed and stored lights for the TiO₂ to remain photocatalytic activity in the dark.     

Eu<Superscript>3+</Superscript>-fluorescence properties in nano-crystallized SnO<Subscript>2</Subscript>-SiO<Subscript>2</Subscript> glass-ceramics

Fluorescence and spectral hole burning properties of Eu³⁺ ions were studied in nanocrystals-precipitated SnO₂-SiO₂ glasses. The glasses were prepared to contain various amount of Eu₂O₃ using the sol-gel method, in which SnO₂ nanocrystals were precipitated by heating in air. In the glasses containing Eu₂O₃ less than 1%, the Eu³⁺ ions were preferentially doped in the SnO₂ nanocrystals and their fluorescence intensities were enhanced by the energy transfer due to the recombination of electrons and holes excited in SnO₂ crystals. The SnO₂ nanocrystals-precipitated glasses exhibited the persistent spectral holes with the depth of ∼25% of the total fluorescence intensities of the Eu³⁺ ions. With the increasing Eu₂O₃ concentration, the amount of SnO₂ nanocrystals decreased and the Sn⁴⁺ ions formed the random glass structure together with the silica network. This structure change induced the fluorescence intensities and the hole depth to decrease.     

Synthesis and characterization of Eu<Superscript>3+</Superscript> doped Lu<Subscript>2</Subscript>O<Subscript>3</Subscript> nanophosphor using a solution-combustion method

Fine Eu³⁺-doped lutetium oxide (Lu₂O₃:Eu³⁺) nanophosphor were synthesized using a low-temperature solution-combustion method in a methyl-alcohol solution. The characteristics of the nanophosphors synthesized at various sintering temperatures with different Eu³⁺ concentrations were analyzed to determine the optimum synthesis conditions. Thermogravimetry/differential thermal analysis showed that Lu₂O₃:Eu³⁺ crystallizes completely when the dry powder is sintered at 500 °C. The Lu₂O₃:Eu³⁺ crystals had a cubic structure and monoclinic phase. The peak position of the luminescence spectrum did not differ with the concentration of Eu or the sintering temperature or atmosphere, whereas the luminescence intensity was strongly dependent on the concentration and sintering conditions.     

Near-infrared quantum cutting in Tb<Superscript>3+</Superscript> and Yb<Superscript>3+</Superscript>-doped Y<Subscript>2</Subscript>O<Subscript>3</Subscript> nanophosphors

Properties of the quantum-cutting phosphors are dependent on various factors such as dopant concentration, crystallinity, homogeneity, particle size and surface morphology. Effective control of the above parameters can enhance the quantum-cutting ability of the phosphor material. Nano-sized particles of Y₂O₃:Tb³⁺,Yb³⁺ were prepared with a solution-based co-precipitation method and subsequent calcination. Effective control of the reaction parameters and doping concentration helped to produce uniform nanostructures with high quantum-cutting efficiency up to 181.1 %. The energy transfer mechanism between Tb³⁺ and Yb³⁺ was studied by considering their spectroscopic properties and time-resolved spectroscopy. The high efficiency and small particle size of the quantum-cutting phosphor Y₂O₃:Tb³⁺,Yb³⁺ make it a suitable candidate for its application in solar cells.     

Eu<Superscript>3+</Superscript>-doped LaPO<Subscript>4</Subscript> and LaAlO<Subscript>3</Subscript> nanosystems and their luminescence properties

Eu³⁺ ion-doped LaPO₄ nanowires or nanorods have been successfully synthesized by a simple hydrothermal method. The influence of varying the hydrothermal and subsequent sintering conditions on the morphology and structure of the LaPO₄ host has been investigated by scanning electron microscopy (SEM) and X-ray diffraction (XRD). For comparison, the Eu³⁺ ions were also doped into monoclinic monazite LaPO₄ nanoparticles and perovskite LaAlO₃ nanoparticles. The relative intensities of the emission lines of the LaPO₄:Eu³⁺ nanosystems were essentially independent of their shape. The optimal doping concentrations in the monoclinic LaPO₄ and perovskite LaAlO₃ nanosystems were determined to be about 5.0 and 3.5 mol%, respectively. Under appropriate UV-radiation, the red light emitted from LaAlO₃:Eu³⁺ (3.5 mol%) was brighter than that from LaPO₄:Eu³⁺ (5.0 mol%) nanomaterial, resulting from differences in their spin-orbit couplings and covalence, which indicates that the nanoscale LaAlO₃ is a promising host material for rare earth ions. Electronic Supplementary Material  Supplementary material is available for this article at and is accessible for authorized users. Supported by the National Natural Science Foundation of China (Grant Nos. 20873039 & 90606001), Hunan Provincial Natural Science Foundation (No. 07jj4002), and the Students Innovation Training Fund of Hunan University     

Photoacoustic and photoluminescence studies on ThO<Subscript>2</Subscript>:Sm<Superscript>3+</Superscript>

Nanocrystalline ThO₂:Sm³⁺ was synthesized using wet-chemical route and characterized using X-ray diffraction (XRD), photoacoustic (PA) and photoluminescence (PL) spectroscopy. PA absorptions of Sm³⁺ doped samples are found to be quite weak as compared to Nd³⁺, while PL of Sm³⁺ was intense. As the energy gap between lowest luminescent levels and highest non-luminescent level in samarium ion is around 7000 cm^?1; it is highly fluorescing compared to Nd³⁺ which has close by levels. Through photoacoustic data it was pointed out that large covalent character exists in ThO₂:Nd³⁺ compared to ThO₂:Sm³⁺.     

The New Fluorescence Enhancement System Eu<Superscript>3+</Superscript>-ARADE-HMTM-Al<Superscript>3+</Superscript> and its Analytical Application

A new bis-Schiff base ligand, N,N-bis-(4-N-aminothiourea-2-amylidene)-4,4-diaminodiphenyl ether (ARADE), was synthesized. Its complex with Eu³⁺ in DMF emits the intrinsic fluorescence of Eu³⁺. The fluorescence intensity of the Eu³⁺-ARADE system was enhanced about 60-fold by the addition of hexamethylene tetramine (HMTM) and potash alum. This is a new fluorescence enhancement phenomenon. The excitation and emission wavelengths are 375nm and 615nm, respectively. Under optimal conditions, the fluorescence intensities vary linearly with the concentration of Eu³⁺ in the range of 7.8×10^–9–1.75×10^–5mol·L^–1 with a detection limit of 5.2×10^–9mol·L^–1, or with the concentration of Al³⁺ in the range of 3.1×10^–7–9.7×10^–5mol·L^–1 with a detection limit of 2.7×10^–7mol·L^–1. The interferences of some rare earth metals and other inorganic ions were described. This method was applied to the determination of Eu³⁺ in high purity yttrium oxide and the analysis of Al³⁺ in alloy steel standard samples. The mechanism of fluorescence enhancement was also studied.     

Ca<Superscript>2+</Superscript> and Mg<Superscript>2+</Superscript> incorporated barium hexaferrites: structural and magnetic properties

BaM hexaferrites substituted with both Ca²⁺ and Mg²⁺ ions, namely, Ba_1-2×Ca_xMg_xFe₁₂O₁₉ (0.0?≤?x?≤?0.1), synthesized during a sol–gel auto-combustion route. The hexaferrite phase and morphology of all samples were investigated using X-ray powder diffraction, a field emission scanning electron microscope, a high-resolution transmission microscope, and Fourier transform infrared spectroscopy. In addition, an M-type hexagonal structure was confirmed using XRD for all samples. FE-SEM and TEM revealed the shape of the hexagonal plate. Measurements of the magnetization versus the field M(H) of Ba_1-2×Ca_xMg_xFe₁₂O₁₉ (0.0?≤?x?≤?0.1) nanohexaferrites were conducted at 300 and 10?K. A hard-ferrimagnetic behavior at both 300 and 10?K was noted for the different products produced. The squareness ratio indicates the uniaxial anisotropy for various products. The deduced values of saturation magnetization (M_s) in all substituted samples are higher than in the pristine sample (x?=?0). The Ba_0.96Ca_0.02Mg_0.02Fe₁₂O₁₉ nanosized hexaferrite showed the highest values of M_s, remanence M_r, magneton number (n_B), and magnetocrystalline anisotropy constant (K_eff). In contrast, the values of the coercive field (H_c) and intrinsic coercivity (H_ci) diminish with the increase in the amount of the substituted Ca and Mg elements.

Open image in new window

     

Local structure and photoluminescent characteristics of Eu<Superscript>3+</Superscript> in ZnO–SiO<Subscript>2</Subscript> glasses

The photoluminescence properties of xZnO–(100−x)SiO₂ (x = 0, 5, 10, 20) containing 1% Eu₂O₃ prepared by a sol–gel method were systematically investigated. The results indicated that the relative proportion of f–f transitions to charge transfer (CT) absorption decreased with the increase of ZnO concentration. The intensity of ⁵D₀–⁷F_J transitions of Eu³⁺ ions was enhanced with the increase of ZnO content due to local structure changes and decreased quantities of Eu³⁺ ions clusters. The results of fluorescence line narrow (FLN) spectra indicated that Eu³⁺ ions occupied one site in SiO₂ glass and two sites in ZnO–SiO₂ glasses. The second-order crystal field parameters were calculated. B₂₀ and B₂₂ for site 1 increased with excitation energy, while ones hardly changed for site 2.     

Influence of annealing temperature on material properties of red emitting ZnGa<Subscript>2</Subscript>O<Subscript>4</Subscript>: Cr<Superscript>3+</Superscript> nanostructures

Zinc gallate (ZnGa₂O₄) nanopowders doped with Cr³⁺ (1?mo%) were synthesized by the citric acid assisted sol–gel method. The influence of annealing temperature, structural, morphological, and optical properties of ZnGa₂O₄: Cr³⁺ (1?mol%) nanosized particles were investigated. The X-ray diffraction (XRD) spectra indicated that the nanoparticles are cubic in structure and the annealing temperature did not influence any c in structure. The average crystallite size of ZnGa₂O₄: Cr³⁺ nanoparticles were observed to increase from 11.85 to 30.88?nm as the annealing temperature increased from 600 to 1000?°C. The scanning electron microscopy (SEM) showed nearly spherical nanostructures that change in size with annealing temperature. The high resolution transmission electron microscope (HR-TEM) images show well resolved lattice fringes which is an indications of highly crystalline samples. Ultraviolet–visible (UV–Vis) measurement show decrease in reflectance in visible region and energy band gap was found to decrease with annealing temperature. The photoluminescence (PL) intensity was found to be maximum for sample annealed at high temperature (1000?°C) and least with sample annealed at low temperature (600?°C). An increase in annealing temperature leads significantly increment in PL intensity. The degree of crystallinity also increased with annealing temperature from XRD, SEM, and HR-TEM analysis. The photoluminescence lifetimes, particle size, and emission spectra are comparable with reports on bioimaging applications.

Open image in new window

     

Thermodynamic properties of silicate glasses and melts: V. Systems CaB<Subscript>2</Subscript>O<Subscript>4</Subscript>-CaSiO<Subscript>3</Subscript> and Ca<Subscript>2</Subscript>B<Subscript>2</Subscript>O<Subscript>5</Subscript>-CaSiO<Subscript>3</Subscript>

Thermodynamic properties of melts of the CaB₂O₄-CaSiO₃ and Ca₂B₂O₅-CaSiO₃ systems were determined by the method of high-temperature mass-spectrometry. The melts of these systems are characterized by negative deviations from the ideal behavior at 1800 K.     

Preparation and Characterization of GdTaO<Subscript>4</Subscript>:Eu<Superscript>3+</Superscript> Sol-Gel Luminescence Thin Films

High quality GdTaO₄:Eu³⁺ luminescence films have been successfully prepared through a modified sol-gel process. The films were prepared using inorganic materials as raw materials, and the thermal decomposition and UV assisted technique were introduced to improve the quality of the film and reduce the period for forming the thick film. Results of structural studies by atomic force microscopy (AFM) and X-ray diffraction (XRD) showed that the surface was smooth and the structure was monoclinic with the average grain size of about 55 nm. The emission and excitation spectra of the film were investigated. Related to the transition ⁵ D₀ →⁷ F₁ and ⁵ D₀→⁷ F₂ of Eu³⁺ ions, the main luminescence peaks were observed at 591 and 611 nm respectively, and the luminescence peak at 345 nm was detected simultaneously related to the TaO₄³⁻ emission. Transmission spectrum and decay curve of the luminescence are also presented in this paper.     

Glass formation in the CaO-Bi<Subscript>2</Subscript>O<Subscript>3</Subscript>-B<Subscript>2</Subscript>O<Subscript>3</Subscript> and SrO-Bi<Subscript>2</Subscript>O<Subscript>3</Subscript>-B<Subscript>2</Subscript>O<Subscript>3</Subscript> systems

A physicochemical study of glasses based on the MO-Bi₂O₃-B₂O₃ and SrO-Bi₂O₃-B₂O₃ systems was performed. Glass formation regions were found. The structural and optical properties, as well as the thermal behavior of the glasses, were studied.