Electrochemical synthesis and characterization of thiophene conducting polymer in aqueous micellar medium

In opposite with the usually applied synthesis in organic media, the polymerization of bithiophene in aqueous media has been studied. The use of a non-ionic surfactant (polyoxyethylene octyl phenyl ether (Triton X-100)) is useful not only to solubilize the hydrophobic monomer but it is also important to incorporate various—biologically and catalytically active—additives. In this paper, the optimization of the polymerization conditions as well as the characterization of the electrochemical, spectral and mass exchange behavior of these composite films is summarized. The layers have shown imperceptible electroactivity in monomer-free aqueous LiClO₄ solutions, and electrochemical quartz crystal microbalance (EQCM) studies exhibited scarce ion movements, caused assumingly by the fact that the dopant species—moving together with their hydrate shell in the aqueous media—could not penetrate into the hydrophobic film. In contrast, nice reversible redox transformation could be obtained in organic medium such as acetonitrile, where—according to the EQCM results—the charge carrier formation/depletion is accompanied by the incorporation/removal of ClO₄ ^? anions. In this solution, the spectral changes have proved the transformation into the conducting state, connected to both mono- and di-cation forms. The incorporation of the surfactant has been demonstrated by the extraordinary surface morphology of the polybithiophene (pBT) films, characterized by scanning electron microscopy. The elementary composition of the curious shell-shaped objects, monitored by energy dispersive X-ray spectroscopy (EDX), evidenced the presence of Triton X-100 by the increased C/S ratio compared to neat polybithiophene, while the Cl/S data reflected the changes connected to the doping level as a consequence of ClO₄ ^? anion movements. Moreover, ex situ attenuated total reflectance (ATR) FT–IR measurements clearly showed the existence of C―O bonds, also proving the successful functionalization by the surfactant, built permanently into the redox active films.     

Kinetics and mechanism of the redox reaction between malachite green and iron(III) in aqueous and micellar media

The kinetics of the oxidation of malachite green (MG⁺) by Fe(III) were investigated spectrophotometrically by monitoring the absorbance change at 618 nm in aqueous and micellar media at a temperature range 20–40 °C; I = 0.10 mol dm^?3 for [H⁺] range (2.50–15.00) × 10^?4 mol dm^?3. The rate of reaction increases with increasing [H⁺]. The reaction was carried out under pseudo-first-order conditions by taking the [Fe(III)] (>10-fold) the [MG⁺]. A mechanism of the reaction between malachite green and Fe(III) is proposed, and the rate equation derived from the mechanism was consistent with the experimental rate law as follows: Rate = (k ₄ + K ₁ k ₅[H⁺]) [MG⁺][Fe(III)]. The effect of surfactants, such as cetyltrimethylammonium bromide (CTAB, a cationic surfactant) and sodium dodecylsulfate (SDS, an anionic surfactant), on the reaction rate has been studied. CTAB has no effect on the rate of reaction while SDS inhibits it. Also, the effect of ligands on the reaction rate has been investigated. It is proposed that electron transfer proceeds through an outer-sphere mechanism. The enthalpy and the entropy of the activation were calculated using the transition state theory equation.     

Spectrophotometric determination of microquantities of Carbidopa using the Carbidopa-iron(III)-phenylfluorone ternary complex in micellar medium

Summary A new analytical method for the spectrophotometric determination of Carbidopa (CBDA), either in pure form or in tablets is described. The method is based on a ternary complex formation between CBDA, iron(III) and phenylfluorone (Phfl) in the presence of Tween 20 as a surfactant. At the optimum pH 9.55, the ternary complex shows an absorption maximum at =636 nm, with an apparent molar absorptivity of 1.098×10⁵ l mol^–1 cm^–1 and a Sandell's sensitivity of 2.22 ng cm^–2. The solution of the ternary complex obeys Beer's law in the concentration range of 0.1–3.0 ppm of CBDA. The correlation coefficient was found to be r=0.9999. Results obtained by application of the proposed method and the B.P. 1988 official one were in good agreement and a statistical comparison by means of the Student's t-test as well as by the variance ratio F-test shows no significant difference between the two analytical methods.     

Spectrophotometric determination of ascorbic acid with iron(III) and p-carboxyphenylfluorone in a cationic surfactant micellar medium.

A simple and highly sensitive spectrophotometric method for the determination of ascorbic acid (AA) was established by using iron(III) and p-carboxyphenylfluorone (PCPF) in a cationic surfactant micellar medium. The apparent molar absorptivity of the proposed method, which does not require an extraction procedure, was 2.05 x 10(6) dm3 mol-1 cm-1 at 655 nm. Beer's law was obeyed in the concentration range of 0.02-0.12 microgram/cm3 for AA. The procedure was successfully applied to assays of AA in pharmaceutical preparations. It is suggested that the method is based on a coupled redox-complexation reaction in which the first step is the oxidation of AA by iron(III), and the second step includes the formations of the iron(II)-PCPF (1:2) complex and the dehydroascorbic acid-iron(III)-PCPF (1:1:2) complex.     

Separation of gadolinium(III) and lanthanum(III) by nanofiltration-complexation in aqueous medium

A new method is proposed for the separation of gadolinium(III) and lanthanum(III) in aqueous medium by nanofiltration combined with a complexation step. First DTPA was chosen as ligand for a selective Gd(III)/La(III) complexation. Having investigated the influence of three factors (pH, temperature and amount of ligand) for the selective complexation of DTPA towards Gd(III) and La(III), the system is then combined with a nanofiltration separation process to remove 92% of initial Gd(III) and only 12% of initial La.     

Separation of americium(III) from lanthanides(III) by nanofiltration-complexation in aqueous medium

The separation of Am(III) from a mixture of lanthanides(III) was performed in aqueous medium by nanofiltration combined with a complexation step using a DTPA derivative as selective complexing agent.     

Simultaneous determination of iron(II) and iron(III) by micellar electrokinetic chromatography using an off-line selective complexing reaction.

A simultaneous determination with UV detection/capillary electrophoresis for Fe(II) and Fe(III) was achieved using a sulfonated bathophenantholine and desfferioxamine B. When the electrophoretic buffer was 60 mmol l(-1) SDS, 10 mmol l(-1) acetic acid (pH 4.0) and 10 mmol l(-1) ascorbic acid and at -10 kV, the iron(II) and iron(III) could not only be completely separated, but also be sensitively determined.     

Organocatalysis in aqueous micellar medium: a new protocol for the synthesis of [1,2,4]-triazolyl-thiazolidinones

A new environmentally friendly methodology for the efficient synthesis of biologically significant triazole thiazolidinone hybrids in aqueous medium, using acetic acid as an organocatalyst in the presence of cetyltrimethylammonium bromide (CTAB) surfactant has been developed for the first time. The effect of several surfactants on the yield and completion time of the reaction was investigated and it was found that the use of CTAB at 60 °C gave the best results (79–96% in 20 min–35 min) for the synthesis of the target compounds.     

Intermediate and ion-pair formation in the outer-sphere reactions between azido-pentacyanocobaltate(III) and iron(II) polypyridyl complexes in aqueous medium

The kinetics of the reactions between azido-pentacyanocobaltate(III), Co(CN)₅N₃ ³⁻, and iron(II) polypyridyl complexes, Fe(LL)₃ ²⁺ (LL = bipy, phen), have been studied in both neutral and acidic aqueous solutions at I = 0.1 mol dm⁻³ NaCl. The reactions were carried out under pseudo-first-order conditions in which the concentration of Fe(LL)₃ ²⁺ was kept constant, and the second-order rate constants obtained for the reactions at 35 °C were within the range of 0.156–0.219 dm³ mol⁻¹ s⁻¹ for LL = bipy and 0.090–0.118 dm³ mol⁻¹ s⁻¹ for LL = phen. Activation parameters were measured for these systems. The dependence of reaction rates on acid was studied in the range [H⁺] = 0.001–0.008 mol dm⁻³. The reaction in acid medium shows interesting kinetics. Two reactive species were identified in acid medium, namely, the protonated cobalt complex and the azido-bridged binuclear complex. The electron-transfer process is proposed to go by mixed outer- and inner-sphere mechanisms in acid medium, in which electron transfer through the bridged inner-sphere complex (k ₅) is slower than through the outer-sphere path (k ₄). Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Cu(II) promoted oxidation of L-valine by hexacyanoferrate(III) in cationic micellar medium

The kinetics of Cu(II) accelerated L-valine (Val) oxidation by hexacyanoferrate(III) in CTAB micellar medium were investigated by measuring the decline in absorbance at 420 nm. By adjusting one variable at a time, the progression of the reaction has been inspected as a function of [OH⁻], ionic strength, [CTAB], [Cu(II)], [Val], [Fe(CN)₆³⁻], and temperature using the pseudo-first-order condition. The results show that [CTAB] is the critical parameter with a discernible influence on reaction rate. [Fe(CN)₆]^3- interacts with Val in a 2:1 ratio, and this reaction exhibits first-order dependency with regard to [Fe(CN)₆³⁻]. In the investigated concentration ranges of Cu(II), [OH⁻], and [Val], the reaction demonstrates fractional-first-order kinetics. The linear increase in reaction rate with added electrolyte is indicative of a positive salt effect. CTAB significantly catalyzes the process, and once at a maximum, the rate remains almost constant as [CTAB] increases. Reduced repulsion between surfactant molecules' positive charge heads brought on by the negatively charged [Fe(CN)₆]^3-, OH⁻, and [Cu(OH)₄]^2- molecules may be responsible for the observed drop in CMC of CTAB.     

Potentiometric studies of indium(III) azide complexes in aqueous medium

The stability constants of indium-azide complexes were determined by the potentiometric method (glass electrode). The effect monitored was the change in pH of a solution of azide and hydrazoic acid (N(-)(3)/HN(3)) when indium(III) cations were added. The azide concentration was varied from close to zero to 90mM, the ionic strength being kept at 2.000 M with sodium perchlorate and the temperature at 25.0 degrees . Evaluation of experimental data showed only mononuclear species, and the global constants found were beta(1) = (2.0 +/- 0.1) x 10(3), beta(2) = (7 +/- 2) x 10(5), beta(3) = (5 +/- 1) x 10(7) and beta(4) = (7 +/- 3) x 10(8).     

Thermodynamic quantities for the oxidation of ranitidine by diperiodatocuprate(III) in aqueous alkaline medium

The kinetics of oxidation of the anti-ulcer drug, ranitidine hydrochloride (RNH) by diperiodatocuprate(III) (DPC) in alkaline medium was studied spectrophotometrically. The reaction exhibits 1:2 stoichiometry (ranitidine:DPC). The reaction is of first order in [DPC] and has less than unit order in [RNH] and negative fractional order in [alkali]. The involvement of free radicals was observed in the reaction. The oxidation has been found to proceed via a DPC-ranitidine complex, which decomposes slowly in a rate-determining step followed by other fast steps to give the products, which were identified as ranitidine sulfoxide by spot test and spectroscopic studies. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Graft copolymerization of 4-vinylpyridine onto cellulose using Co (III) acetylacetonate comlex in aqueous medium

The graft copolymerization of 4-vinylpyridine (4-VP) onto cellulose has been carried out in heterogeneous conditions with cobaltacetylacetonate complex (Co (acac)₃) under nitrogen atmosphere at 35±0.1°C in aqueous media. The grafting parameters such as graft yield, grafting efficiency, total conversion, frequency of grafting and rate of grafting have been evaluated as a function of concentration of 4-vinylpyridine, cobaltacetylacetonate and reaction temperature of graft copolymerization. Variation in concentration of monomer and initiator leads to a consistent increase in grafting parameters and then show a decreasing trend. The efficient grafting of monomer in presence of cobaltacetylacetonate complex is due to the coordination of the -electrons of the 4-vinylpyridine with the metal chelate which facilitate the homolytic decomposition of metal-oxygen bond to form radicals at relatively low temperature. The rate of graft copolymerization is directly proportional to the concentration of monomer and the square root of the concentration of the cobaltacetylacetonate complex. The activation energy (Ea) for graft copolymeriztion has been calculated using a Arrhenius plot and is 31.0kJ mol^–1 within the temperature range of 20–40°C. The grafting of 4-vinylpyridine has also been studied in presence of various additives and their effects have been suitably explained. On the basis of the experimental observations, reaction steps are proposed and rate expression has been derived.     

Synergistic extraction of Eu(III) and Nd(III) from aqueous medium using a mixture of sulfasalazine and 1,10-phenanthroline

Journal of Radioanalytical and Nuclear Chemistry - Solvent extraction of Eu(III) and Nd(III) from aqueous medium was investigated by sulfasalazine in benzoyl alcohol as single extractant and then...     

An rhodamine-based fluorescence probe for iron(III) ion determination in aqueous solution

An “off-on” rhodamine-based fluorescence probe for the selective signaling of Fe(III) has been designed exploiting the guest-induced structure transform mechanism. This system shows a sharp Fe(III)-selective fluorescence enhancement response in 100% aqueous system under physiological pH value and possesses high selectivity against the background of environmentally and biologically relevant metal ions including Al(III), Cd(II), Fe(II), Co(II), Cu(II), Ni(II), Zn(II), Mg(II), Ba(II), Pb(II), Na(I), and K(I). Under optimum conditions, the fluorescence intensity enhancement of this system is linearly proportional to Fe(III) concentration from 6.0 × 10⁻⁸ to 7.2 × 10⁻⁶ mol L⁻¹ with a detection limit of 1.4 × 10⁻⁸ mol L⁻¹.     

A study on the synthesis of alkaline copper(III)-periodate (DPC) complex with an overview of its redox behavior in aqueous micellar media

Research on Chemical Intermediates - In the present study the copper(III)-periodate (DPC) has been synthesized in an alkaline medium. The stability of this complex is significantly dependent on the...     

Complexation between iron(III) and nicotinamide in aqueous dimethyl sulfoxide

The stability constants of iron(III) complexes with nicotinamide in water-DMSO mixtures (X _DMSO = 0–0.75) were determined by potentiometric titration at 25.0 ± 0.1°C and an ionic strength of 0.25 (NaClO₄). The contributions from the solvation of the reagents to the Gibbs energy of complexation transfer were analyzed. The stabilities of iron(III), copper(II), and silver(I) complexes with nicotinamide were compared. The observed decrease in the stability constants was attributed to the stabilization of iron(III) solvate complexes as the DMSO content increases.     

Photochemistry of the iron(III) complex with pyruvic acid in aqueous solutions

Photochemistry of the 1: 1 Fe^pIII complex with pyruvic acid (PyrH) in aqueous solutions was studied by stationary photolysis and nanosecond laser flash photolysis with the excitation by the 3rd harmonics of an Nd:YAG laser. The quantum yield of [FeIIIPyr]2+ under the excitation at 355 nm is 1.0±0.1 and 0.46±0.05 in the absence and in the presence of dissolved oxygen, respectively. In experiments on laser flash photolysis, a weak intermediate absorption in the region 580–720 nm was found. The absorption was ascribed to the [FeII…MeC(O)COO•]^p2+ radical complex. Laser flash photolysis of [FePyr]^p2+ in the presence of methyl viologen dications (MV^p2+) resulted in the formation of the MV•+ radical cations. The proposed reaction mechanism includes the inner-sphere electron transfer in the light-excited complex accompanied by the formation of the [Fe^pII…MeC(O)COO•]^p2+ radical complex followed by its transformation into the reaction products.     

Iridium(III) catalyzed oxidation of iodide ions in aqueous acidic medium

Oxidation of iodide ions by K₃Fe(CN)₆, catalyzed by hydrogen ions obtained from hydrochloric acid was found to be further catalyzed by iridium(III) chloride. Rate, when the reaction is catalyzed only by the hydrogen ions, was separated from the rate when iridium(III) and H⁺ions both, catalyze the reaction. Reactions studied separately in the presence as well as in the absence of IrCl₃ under similar conditions were found to follow second order kinetics with respect to [I⁻]. While the rate showed direct proportionality with respect to [K₃Fe(CN)₆] and [IrCl₃]. At low concentrations the reaction shows direct proportionality with respect to [H⁺] which tends to become proportional to the square of hydrogen ions at higher concentrations. Strong retarding affect of externally added hexacyanoferrate(II) ions was observed in the beginning but further addition affects the rate to a little extent. Changes in [Cl⁻] and also ionic strength of the medium have no effect on the rate. With the help of the intercept of catalyst graph, the extent of the reaction, which takes place without adding iridium(III), was calculated and was found to be in accordance with the values obtained from the separately studied reactions in which only H⁺ ions catalyze the reaction. It is proposed that iridium forms a complex, which slowly disproportionates into the rate-determining step. Thermodynamic parameters at four different temperatures were calculated.