Comparative inhibition study of mild steel corrosion in hydrochloric acid by new class synthesised quinoxaline derivatives: part I

7-Cchloro-3-(4-methoxystyryl)quinoxalin-2(1H)-one (CMOSQ) and 7-chloro-2-(4-methoxyphenyl)thieno(3.2-b)quinoxaline (CMOPTQ) have been investigated for mild steel corrosion in 1 M HCl at different concentrations using weight loss measurements, potentiodynamic polarization curves and electrochemical impedance spectroscopy methods. Generally, inhibition efficiency of the investigated compounds was found to depend on inhibitor concentration and their structures. Comparitive results showed that CMOPTQ was the best inhibitor and the inhibition efficiency increased with increasing the concentration and attained 86 and 87 % at 10^?3 M of CMOPTQ and 10^?3 M of CMOSQ, respectively. Potentiodynamic polarization studies clearly reveal that these inhibitors act essentially as cathodic-type inhibitors. The inhibition efficiency increases with immersion time and reaches 95 % CMOPTQ at 24 h. The electrochemical impedance spectroscopy result showed that these compounds act by formation of film.     

Aqueous extract of <Emphasis Type="Italic">Argemone mexicana</Emphasis> roots for effective protection of mild steel in an HCl environment

The inhibition effect of aqueous Argemone mexicana root extract (AMRE) on mild steel corrosion in 1 M HCl has been studied by weight loss, Tafel polarization curves, electrochemical impedance spectroscopy, scanning electron microscopy (SEM), and atomic force microscopy techniques. Results indicate that inhibition ability of AMRE increases with the increasing amount of the extract. A maximum corrosion inhibition of 94 % is acknowledged at the extract concentration of 400 mg L^?1. Polarization curves and impedance spectra reveal that both cathodic and anodic reactions are suppressed due to passive layer formation at the metal–acid interface. It is also confirmed by SEM micrographs and FTIR studies. Furthermore, the effects of acid concentration (1–5 M), immersion time (120 h) and temperature (30–60 °C) on inhibition potential of AMRE have been investigated by the weight loss method and electrochemical techniques. An adsorption mechanism is also proposed on the basis of weight loss results, which shows good agreement with the Langmuir isotherm.     

Study on the Inhibition of Mild Steel Corrosion by Cationic Gemini Surfactant in 1 M HCl

The cationic gemini surfactant 1,2-bis(N-tetradecyl-N,N-dimethylammonium)ethane dibromide (14-2-14) was synthesized using a previously described method. The surfactant was characterized using ¹H NMR. The corrosion inhibition effect of 14-2-14 on mild steel in 1 M HCl at temperatures 30–60°C was studied using weight loss measurements, potentiodynamic polarization measurements and electrochemical impedance spectroscopy. Morphology of the corroded mild steel specimens was examined using scanning electron microscopy (SEM). The results of the studies show that gemini surfactant is an efficient inhibitor for mild steel corrosion in 1 M HCl; the maximum inhibition efficiency (IE) of 98.06% is observed at surfactant concentration of 100 ppm at 60°C. The %IE increases with the increasing inhibitor concentration and temperature. The adsorption of inhibitor on the mild steel surface obeys Langmuir adsorption isotherm. SEM studies confirmed smoother surface for inhibited mild steel specimen.     

Chitosan as an eco-friendly inhibitor for copper corrosion in acidic medium: protocol and characterization

Natural biopolymer chitosan organic compound (COC) has been used as a copper corrosion inhibitor in molar hydrochloric medium. This study was conducted by weight loss, polarization curves and electrochemical impedance spectroscopy measurements. Scanning electron microscopy, energy dispersive X-ray spectrometry and atomic force microscopy studies were used to characterize the surface of uninhibited and inhibited copper specimens. The study of the temperature effect was carried out to reveal the chemical nature of adsorption. The inhibition efficiency tends to increase by increasing inhibitor concentration to reach a maximum of 87% at 10^?1 mg L^?1. The values of inhibitor efficiency estimated by different electrochemical and gravimetric methods indicate the performance of copper in HCl medium containing COC. Adsorption of COC was found to follow the Langmuir adsorption isotherm. In order to get a better understanding of the relationship between the inhibition efficiency and molecular structure of COC, quantum chemical and molecular dynamics simulation approaches were performed to get a better understanding of the relationship between the inhibition efficiency and molecular structure of chitosan.     

Modified multiwalled carbon nanotubes as an electrode reaction catalyst for an all vanadium redox flow battery

Different modified multiwalled carbon nanotubes (MWCNTs) are prepared by heat treatments in the air and in the H₂SO₄?+?HNO₃ (1:1) mixed acids which are investigated by transmission electron microscopy, X-ray photoelectron spectroscopy, X-ray diffraction, Brunaur–Emmett–Teller, and cyclic voltammetry measurements. The results show the physicochemical properties of MWCNTs change significantly after these different modification processes, especially the electrochemical catalytic activity towards the VO₂ ⁺/VO²⁺ and V³⁺/V²⁺ redox pairs. The MWCNTs treated in the air at 600 °C for 30 min shows better electrochemical performances for the VO₂ ⁺/VO²⁺ redox reactions (58.8 and ?32.4 μA for the oxidation and reduction peaks at 10 mV?s^?1, respectively) than any other samples. Compared with the V³⁺/V²⁺ redox couple, the VO₂ ^+/VO²⁺ redox reactions are more easily affected by the physicochemical property changes of the MWCNTs. The enhanced electrochemical catalytic activity of the modified MWCNTs is not only related to the surface oxygen content, but also to the specific surface area, conductivity and the unique structure variations of the MWCNTs. The investigation demonstrated that the modified MWCNTs have a promising future application in the vanadium redox flow battery.     

Inhibitive properties of a phosphonate-based formulation for corrosion control of carbon steel

The aim of the present work was to study the corrosion inhibition of carbon steel using a ternary formulation. This new ternary inhibitor formulation, viz., 2-phosphonobutane-1,2,4-tricarboxylic acid (PBTC), with zinc ions and silicate ions was used to protect carbon steel from corrosion in a low-chloride environment. The gravimetric studies showed that 96 % inhibition efficiency was achieved with the ternary system consisting of 50 ppm PBTC, 50 ppm Zn²⁺ ions, and 10 ppm silicate ions. Out of 0.310 mmol of Zn²⁺ ions, 0.218 mmol was diffused from the bulk of the solution to the metal surface, as revealed from the studies of the solutions by atomic absorption spectroscopy (AAS). Electrochemical methods (potentiostatic polarization and electrochemical impedance spectroscopy) and surface characterization techniques [Fourier transform infrared (FT-IR), scanning electron microscopy (SEM), and atomic force microscopy (AFM)] were used to ascertain the nature of the protective film and for explaining the mechanistic aspects of corrosion inhibition.     

Influence of pyridazine derivative on corrosion inhibition of mild steel in acidic media

The inhibition behavior of 6-methyl-4,5-dihydropyridazin-3(2H)-one (MDP) on corrosion of mild steel in 1 M HCl and 0.5 M H₂SO₄ was investigated using weight loss, potentiodynamic polarization, and electrochemical impedance spectroscopy (EIS) measurements. The results indicated that the corrosion inhibition efficiency depends on concentration, immersion time, solution temperature, and the nature of the acidic solutions. It is also noted that MDP is at its the most efficient in 1 M HCl and least in 0.5 M H₂SO₄. The effect is more pronounced with MDP concentration. It is found that the inhibition efficiency attains 98 % at 5 × 10^?3 M in 1 M HCl and 75 % at 5 × 10^?2 in 0.5 M H₂SO₄. Polarization measurements showed that the MDP acts as a mixed inhibitor. EIS diagrams showed that the adsorption of MDP increases the transfer resistance and decreases the capacitance of the interface metal/solution. From the temperature studies, the activation energies in the presence of MDP were found to be superior to those in uninhibited medium. Finally, a mechanism for the adsorption of MDP was proposed and discussed.     

Performance studies of electrolyte-supported solid oxide fuel cell with Ni–YSZ and Ni–TiO2–YSZ as anodes

Redox cycling of Ni-based anode induces cell degradation which limits the cell's lifetime during solid oxide fuel cell operation. In the present study, the redox testing of electrolyte-supported cells has been investigated with TiO₂-added NiO–YSZ anode matrix. Button cells were fabricated by die-pressing YSZ powder as electrolyte, and onto which NiO–YSZ or NiO–TiO₂–YSZ anode and LSM–YSZ composite cathode were painted. The electrochemical performance and stability have been evaluated by measuring current–voltage characteristics followed by impedance spectroscopy after each redox cycling. Anode matrices before and after cell operation have been characterized by X-ray diffraction (XRD), elemental dispersive X-ray (EDX), and scanning electron microscopy (SEM). During cell operation the peak power density decreases from 111 mW cm^?2 (239 mA cm^?2) to 84 mW cm^?2 (188 mA cm^?2) between 23 and 128 h with five redox cycles for cell having NiO–YSZ (40:60) anode. But for cell with NiO–TiO₂–YSZ (30:10:60), the anode peak power density was constant and stable around 85 mW cm^?2 (194 mA cm^?2) throughout the cell run of 130 h and five redox cycles. No loss in the open circuit voltage was observed. SEM and XRD studies of NiO–TiO₂–YSZ (30:10:60) anodes revealed formation of ZrTiO₄, which may be responsible for inhibition of Ni coarsening leading to stable cell performance.     

Hydroclathrus clathratus marine alga as a green inhibitor of acid corrosion of mild steel

The corrosion inhibitive and adsorption behaviors of Hydroclathrus clathratus on mild steel in 1 M HCl and 1 M H₂SO₄ solutions at 303, 313 and 323 K were investigated by weight loss, electrochemical, and surface analysis techniques. The results show that H. clathratus acts as an inhibitor of corrosion of mild steel in acid media. The inhibition efficiency was found to increase with increase in inhibitor concentration but to decrease with rise in temperature, suggestive of physical adsorption. The adsorption of the inhibitor onto the mild steel surface was found to follow the Temkin adsorption isotherm. The inhibition mechanism was further corroborated by the results obtained from electrochemical methods. Scanning electron microscopy (SEM) and atomic force microscopy (AFM) analyses supported the inhibitive action of the alga against acid corrosion of mild steel.     

Electrochemical performance of Yb-doped LiFePO4/C composites as cathode materials for lithium-ion batteries

LiFePO₄/C and LiYb_0.02Fe_0.98PO₄/C composite cathode materials were synthesized by simple solution technique. The samples were characterized by X-ray diffraction, scanning electron microscope, and thermogravimetric–differential thermal analysis. Their electrochemical properties were investigated by cyclic voltammetry, four-point probe conductivity measurements, and galvanostatic charge and discharge tests. The carbon-coated and Yb³⁺-doped LiFePO4 sample exhibited an enhanced electronic conductivity of 1.9 × 10^?3 Scm^?1, and a specific discharge capacity of 146 mAhg^?1 at 0.1 C. The results suggest that the improvement of the electrochemical performance can be attributed to the ytterbium doping, which facilitates the phase transformation between triphylite and heterosite during cycling, and the conductivity improvement by carbon coating.     

Iodide-induced adsorption of lead(II) ion on a glassy carbon electrode modified with ferroferric oxide nanoparticles

Spherical Fe₃O₄ nanoparticles (NPs) were prepared by hydrothermal synthesis and characterized by scanning electron microscopy and X-ray diffraction. A glassy carbon electrode was modified with such NPs to result in a sensor for Pb(II) that is based on the strong inducing adsorption ability of iodide. The electrode gives a pair of well-defined redox peaks for Pb(II) in pH 5.0 buffer containing 10 mM concentrations of potassium iodide, with anodic and cathodic peak potentials at ?487 mV and ?622 mV (vs. Ag/AgCl), respectively. The amperometric response to Pb(II) is linear in the range from 0.10 to 44 nM, and the detection limit is 40 pM at an SNR of 3. The sensor exhibits high selectivity and reproducibility.

Inhibition of mild steel corrosion in 5 % HCl solution by 5-(2-hydroxyphenyl)-1,2,4-triazole-3-thione

A new corrosion inhibitor, namely 5-(2-hydroxyphenyl)-1,2,4-triazole-3-thione (5-HTT), has been synthesized and its influence on corrosion inhibition of mild steel in 5 % HCl solution has been studied using weight loss method and electrochemical measurements. Potentiodynamic polarization measurements clearly reveal that the investigated inhibitor is of mixed type, and it inhibits the corrosion of the steel by blocking the active site of the metal. Changes in impedance parameters were indicative of adsorption of 5-HTT on the metal surface, leading to the formation of protective films. The degree of the surface coverage of the adsorbed inhibitors was determined by weight loss measurements, and it was found that the adsorption of these inhibitors on the mild steel surface obeys the Langmuir adsorption isotherm. The effect of the temperature on the corrosion behavior with addition of 5 × 10^?4 M of the inhibitor was studied in the temperature range 30–60 °C. The reactivity of this compound was analyzed through theoretical calculations based on density functional theory to explain the different efficiency of these compounds as a corrosion inhibitor.     

Experimental study of inhibition of corrosion of mild steel in 1 M HCl solution by two newly synthesized calixarene derivatives

Inhibition of the corrosion of mild steel in molar hydrochloric acid by two calixarenes, including the effect of inhibitor concentration and temperature, has been investigated by use of weight loss and electrochemical measurements (polarisation and impedance). The results obtained showed that the rate of corrosion decreased substantially in the presence of the compounds, with maximum inhibition of 98.2 % by one of the compounds at a concentration of 10^?3 M. The effect of temperature on corrosion behaviour in the presence of different concentrations of the two new calixarenes was studied in the range 45–75 °C. The efficiency of inhibition by the compounds increased with increasing inhibitor concentration and was independent of temperature. Polarisation curves revealed that the calixarenes are mixed-type inhibitors. Adsorption of the inhibitors by the carbon steel surface obeyed the Langmuir adsorption isotherm. Some thermodynamic data for the dissolution and adsorption processes were also determined.     

Quantum chemical study of inhibition of the corrosion of mild steel in 1 M hydrochloric acid solution by newly synthesized benzamide derivatives

The inhibitory effect of some new synthesized benzamide compounds on corrosion of mild steel in 1 M HCl solution has been studied by use of weight loss measurements and the electrochemical techniques potentiodynamic polarization and electrochemical impedance spectroscopy. The inhibiting action is more pronounced with increasing concentration. Inhibition efficiency is maximum (approximately 99 %) at 10^?3 M. Polarization measurements also show that the compounds act as mixed inhibitors. The cathodic curves indicate that reduction of protons at the mild steel surface occurs as a result of a pure activating mechanism. EIS measurements reveal increased transfer resistance with increasing inhibitor concentration. The presence of heteroatoms increases inhibition efficiency without causing a drastic change in adsorption mechanism, which follows the Langmuir isotherm model. Significant correlations were obtained between inhibition efficiency with the chemical indexes calculated, by use of the standard software Gaussian03, on the basis of density functional theory (DFT) at the B3LYP/6-31G** level of theory, indicating that variation of inhibition with inhibitor structure may be explained in terms of electronic properties. The effect of temperature on the corrosion behaviour of steel in 1 M HCl without and with inhibitors at 10^?3 M was studied in the temperature range from 308 to 333 K, and the associated activation energy was determined.     

Corrosion inhibition investigations of 3-acetylpyridine semicarbazone on carbon steel in hydrochloric acid medium

The corrosion inhibition efficiency of 3-acetylpyridine-semicarbazide (3APSC) on carbon steel (CS) in 1.0 M HCl solution has been investigated using weight loss measurements, electrochemical impedance spectroscopy (EIS) and potentiodynamic polarization studies. The results show that inhibition efficiency on metal increases with the inhibitor concentration. 3APSC exhibited marked inhibition towards carbon steel in HCl medium even at low concentrations. The adsorption of inhibitor on the surfaces of the corroding metal obeys the Langmiur isotherm and thermodynamic parameters (K _ads, ?G _ads ⁰ ) were calculated. Activation parameters of the corrosion process (E _a, ?H* and ?S*) were also calculated from the corrosion rates. Polarization studies revealed that 3APSC act as a mixed-type inhibitor. Surface analysis of the metal specimens was performed by scanning electron microscopy.     

High-energy-density LiMn0.7Fe0.3PO4 nanorods synthesized by microwave-assisted solvothermal method

Microwave-assisted solvothermal method has been developed for synthesizing LiMn_0.7Fe_0.3PO₄ cathode materials with an olivine structure. The obtained LiMn_0.7Fe_0.3PO₄ nanorods were characterized by X-ray diffraction, scanning and transmission electron microscope, Brunauer-Emmett-Teller surface area measurements, and electrochemical tests. Electrochemical tests clearly indicate that the as-made LiMn_0.7Fe_0.3PO₄ nanorods exhibit two redox activities of Fe³⁺/Fe²⁺ and Mn³⁺/Mn²⁺ couple at galvanostatic charge-discharge process, which is due to the coexistence of Mn²⁺ with Fe²⁺ at 4c sites. The as-synthesized materials have high energy density, excellent rate capability and cycling stability.     

Charge storage mechanism of copper hexacyanoferrate nanocubes for supercapacitors

The widely accepted theory concerning the electrochemical energy storage mechanism of copper hexacyanoferrate (CuHCF) for supercapacitors is that CuHCF stores charge by the reversible redox processes of Fe³⁺/Fe²⁺ couple and Cu cations are electrochemically inactive. In this work, CuHCF nanocubes (CuHCF-NC) were synthesized in the presence of potassium citrate and its electrochemical properties were tentatively studied in 1 mol/L Na₂SO₄ aqueous electrolyte. Good supercapacitive performance was exhibited. The combined analyses of cyclic voltammogram (CV) and X-ray photoelectron spectroscopy (XPS) disclosed that the CuHCF nanocubes underwent the redox reactions of Fe³⁺/Fe²⁺ and Cu²⁺/Cu⁺ couples to store charges. The Cu²⁺/Cu⁺ redox couple was activated due to the strong coordination interaction between the carboxylate groups of citrate ions and surface Cu cations.     

Zinc oxide nanostructured platform for electrochemical detection of heavy metals

ZnO nanoparticles (ZnO-NP) were prepared by a facile precipitation technique using di-isopropyl amine as precipitating agent. The morpho-structure and porosity of the as-prepared nano-powder were investigated by FT-IR analysis, X-ray diffraction (XRD), scanning electron microscopy (SEM), and BET analysis. By drop-casting, a composite film was deposited to obtain ZnO-NP-Nafion/GCE modified electrode. The modified electrode was investigated by cyclic voltammetry, electrochemical impedance spectroscopy, and square wave anodic stripping voltammetry (SWASV) for the detection of Pb²⁺, Cd²⁺, Cu²⁺, and Fe³⁺, and it was successfully applied for the detection of Pb²⁺ and Cu²⁺ in real water samples.     

Enhanced zinc ion transport in gel polymer electrolyte: effect of nano-sized ZnO dispersion

The effect of the dispersion of zinc oxide (ZnO) nanoparticles in the zinc ion conducting gel polymer electrolyte is studied. Changes in the morphology/structure of the gel polymer electrolyte with the introduction of ZnO particles are distinctly observed using X-ray diffraction and scanning electron microscopy. The nanocomposites offer ionic conductivity values of >10^?3 S cm^?1 with good thermal and electrochemical stabilities. The variation of ionic conductivity with temperature follows the Vogel–Tamman–Fulcher behavior. AC impedance spectroscopy, cyclic voltammetry, and transport number measurements have confirmed Zn²⁺ ion conduction in the gel nanocomposites. An electrochemical stability window from ?2.25 to 2.25 V was obtained from voltammetric studies of nanocomposite films. The cationic (i.e., Zn²⁺ ion) transport number (t ₊) has been found to be significantly enhanced up to a maximum of 0.55 for the dispersion of 10 wt.% ZnO nanoparticles, indicating substantial enhancement in Zn²⁺ ion conductivity. The gel polymer electrolyte nanocomposite films with enhanced Zn²⁺ ion conductivity are useful as separators and electrolytes in Zn rechargeable batteries and other electrochemical applications.     

Electrochromic properties of Prussian blue–polypyrrole composite films in dependence on parameters of synthetic procedure

Composite materials of Prussian blue–polypyrrole (PB/PPy) on the surface of indium tin oxide (ITO)-coated glasses were obtained via one-step chemical (redox) and one-stage electrochemical procedures in mixed solution of iron (III), hexacyanoferrate (III), and pyrrole with various concentration ratios of components in nitrate supporting electrolyte. Electrochemical stability of composite films depends on the amount of Py in synthetic solution, whereas color contrast coefficient values depend on the type of synthetic procedure. PB/PPy film electrochromic response (tested by spectroelectrochemical potentiodynamic measurements) was compared with response of both pure PB and pure PPy films. It was shown that degradation of composite films occurs due to PB component instability in Prussian white form. The highest value of color contrast coefficient and great electrochemical stability were revealed for composite films obtained via redox-synthesis procedure from solution with 0.1 mM [Fe³⁺ + Fe(CN)₆ ^3?] and 1.0 mM Ру (PB/PPy-Ch-1:1:10 system).