Novel 1,8-naphthalimide dye for multichannel sensing of H<Superscript>+</Superscript> and Cu<Superscript>2+</Superscript>

A novel 1,8-naphthalimide dye with simple structure has been produced by a facile synthetic method for colorimetric and fluorescent sensing of H⁺ and Cu²⁺. In CH₃CN/H₂O (1/1, v/v), the dye could monitor H⁺ using dual channels (ratiometric absorbance and fluorescence intensity change) from pH 6.2 to 12.0. Meanwhile, in the pH range of 1.9–5.2, the dye could also be used to detect Cu²⁺ using triple channels [ultraviolet–visible (UV–Vis) absorption, fluorescence intensity reduction, as well as fluorescence blueshift]. The detection limits for Cu²⁺ evaluated by colorimetric and fluorescent titration were 6.10 × 10^?7 and 2.62 × 10^?7 M, respectively. The dye exhibited specific selectivity and sensitivity for H⁺ and Cu²⁺ over various coexisting metal ions. Moreover, the sensing mechanism of the dye for H⁺ and Cu²⁺ was carefully examined.     

A functional applied material on recognition of metal ion zinc based on the double azine compound

A colorimetric and fluorescent probe L has been designed and synthesized, which bearing the double azine moiety and showing a detection limit of 2.725 × 10^?7 M towards Zn²⁺. Based on the basic recognition mechanism of ESIPT and CHEF effect, the L has high selectivity and sensitivity to only Zn²⁺ (not Fe³⁺, Hg²⁺, Ag⁺, Ca²⁺, Co²⁺, Ni²⁺, Cd²⁺, Pb²⁺, Cr³⁺, and Mg²⁺) within the physiological pH range (pH = 7.0–8.4) and showed a fluorescence switch. Moreover, this detection progress occured in the DMSO/H₂O ～ HEPES buffer (80/20, v/v; pH 7.23) solution which can conveniently used on test strip.     

A new calix[4]arene Schiff base sensor for Hg<Superscript>2+</Superscript> and Au<Superscript>3+</Superscript>

This article reports the selective sensing ability of a newly synthesized calix[4]arene Schiff base (C4TSB) derivative. C4TSB exhibited strong turn-off fluorescence affinity for Hg²⁺ and Au³⁺. The selective sensing ability of receptor was investigated in the presence of different co-existing competing ions. The limit of detection for Hg²⁺ and Au³⁺ was determined as 1.9 × 10^?5 and 1.0 × 10^?6 M, respectively. Receptor forms 1:1 stoichiometric complex with both metals and their binding constants were calculated as 7.9 × 10³ M^?1 for Hg²⁺ and 5.7 × 10³ M^?1 for Au³⁺. Complexes were also characterized through FT-IR spectroscopy.     

A Schiff base fluorescence probe for highly selective turn-on recognition of Zn2+

A simple Schiff base CTS, synthesized between 2-hydroxy-1-naphthaldehyde and 2-benzylthio-ethanamine, was found to be a good turn-on fluorescence probe for the detection of Zn²⁺, due to the restriction of the rotation of the bond between CN and naphthalene ring and/or the blocking of the photo-induced electron transfer (PET) mechanism of the nitrogen atom to naphthalene ring. Excellent selectivity for Zn²⁺ was evidenced, over many other competing ions, including Fe³⁺, Cr³⁺, Ni²⁺, Co²⁺, Fe²⁺,Mn²⁺, Ca²⁺, Hg²⁺, Pb²⁺, Cu²⁺, Mg²⁺, Ba²⁺, Cd²⁺, Ag⁺, Li⁺, K⁺, and Na⁺, in EtOH/HEPES buffer (95:5, v/v, pH = 7.4). It was noteworthy that Cd²⁺ had no interference with Zn²⁺. The stoichiometric complex of CTS-Zn²⁺ was determined to be 2:1 for CTS and Zn²⁺ in molar, based on the Job plot and single crystal X-ray diffraction data. The binding constant of the complex was 85.7 M^?2 with a detection limit of 5.03 × 10^?7 M. The fluorescence bio-imaging capability of CTS to detect Zn²⁺ in live cells was also studied. These results indicated that CTS could serve as a favorable probe for Zn²⁺.     

A selective colorimetric and fluorescence chemosensing sensor for Cr<Superscript>3+</Superscript> based on a rhodamine base derivative

A rhodamine-conjugated coumarin (L) was used in designing a selective fluorescence chemosensor for the determination of trace amounts of Cr³⁺ ions in acetonitrile–water (MeCN/H₂O (90:10, %v/v) solutions. The intensity of the fluoresce emission of the chemosensor is intensified upon addition of Cr³⁺ ions in MeCN/H₂O (90:10, %v/v) solutions, due to the formation of a selective 1:1 complex between L and Cr³⁺ ions. The fluorescence enhancement versus Cr³⁺ concentration has been found to be linear from 1.0?×?10^?7 to 1.8?×?10^?5 M and a detection limit of 7.5?×?10^?8 M. The proposed fluorescent probe proved to be highly selective towards Cr³⁺ ions as compared to other common metal ions and could be successfully applied to the determination of Cr³⁺ concentrations in some water and wastewater samples.     

Study on the Interaction of Raloxifene and Bovine Serum Albumin by the Tachiya Model

The interaction of bovine serum albumin (BSA) with raloxifene was assessed via fluorescence spectroscopy. The number of binding sites and the apparent binding constants between raloxifene and BSA were analyzed using the Tachiya model and Stern-Volmer equation, respectively. The apparent binding constant and the number of binding sites at 298 K were 2.33×10⁵ L?mol^?1 and 1.0688 as obtained from the Stern-Volmer equation and 2.00×10⁵ L?mol^?1 and 2.6667 from the Tachiya model. The thermodynamic parameters ΔH and ΔS were calculated to be 69.46 kJ?mol^?1 and 121.12 J?K^?1?mol^?1, respectively, suggesting that the force acting between raloxifene and BSA was mainly a hydrophobic interaction. The binding distance between the donor (BSA) and acceptor (raloxifene) was 4.77 nm according to Förster’s nonradiational energy transfer theory. It was also found that common metal ions such as K⁺, Cu²⁺, Zn²⁺, Mg²⁺ and Ca²⁺ decreased the apparent association constant and the number of binding sites between raloxifene and BSA.     

Synthesis of a new pyrene-devived fluorescent probe for the detection of Zn2+

A novel pyrene-based receptor bearing benzothiazole was synthesized as a good turn-on fluorescent sensor for the recognition of Zn²⁺. The probe showed an excellent selectivity for Zn²⁺over most other competing ions (eg, Cr³⁺, Li⁺, Cd²⁺, Al³⁺, Pb²⁺, Li⁺, Mg²⁺, Ag⁺, Ca²⁺, Ni²⁺, Mn²⁺, Fe³⁺, Hg²⁺, Ba²⁺, K⁺, Na⁺, Cu²⁺, Fe²⁺) in EtOH-HEPES (65:35, v/v, pH?=?7.20), which might be attributed to the photoinduced electron transfer (PET) mechanism. The formation of 1:1 stoichiometric PBZ-Zn²⁺ complex was determined based on the Job's plot, ¹H NMR titration and ESI-MS. The binding constant of the complex was 4.04?×?10⁴?M^?1 with a detection limit of 2.58?×?10^?7?M. The potential application of the PBZ in real water samples for recognizing Zn²⁺ was investigated. Bio-imaging study also revealed that PBZ could be applied to detecting Zn²⁺ in live cells. These results indicated that PBZ could be a favorable probe for Zn²⁺.     

A coumarin-based fluorescent and colorimetric chemosensor for rapid detection of fluoride ion

A novel coumarin-based compound 1 featuring thiosemicarbazone as binding unit, was reported as a colorimetric and fluorescent probe for the detection of fluoride anion. The addition of F^? to a solution of probe 1 in tetrahydrofuran resulted in evident naked-eye color change from green-yellow to orange-red under daylight and obvious fluorescence quenching within 3 s. And the detection limit toward F^? was calculated to be as low as 2.16 × 10^?7 mol/L. ¹H NMR titrations proved that the interaction between 1 and fluoride ion: hydrogen bond at low fluoride ion concentration, deprotonation at high fluoride ion concentration. Besides, it exhibited highly sensitivity and selectivity for F^? over other examined ions (Cl^?, Br^?, I^?, AcO^?, NO₃^?, HSO₄^?, H₂PO₄^?) in tetrahydrofuran solution.     

A Highly Selective and Sensitive Fluorescent Probe Recognition for Co2+ in Aqueous Media Based on 8‐Hydroxyquinolin‐2‐carbaldehyde‐2‐pyridylformylhydrazone Derivative

A new (8‐hydroxyquinolin‐2‐yl)methylene picolinohydrazide derivative ( L ) has been successfully synthesized and characterized. The probe L displays high selectivity to Co²⁺ in CH₃CN/HEPES (1:1, Ｖ/Ｖ, 10 mmol·L^?1, pH=7.4) with a fluorescence "ON‐OFF" response. The Co²⁺ ion recognition event possesses some distinct features including rapid response, high selectivity and sensitivity, good anti‐interference ability and being applicable within a wide pH range. Based on job's plot and ESI‐MS studies, the 1:1 binding mode was proposed. The binding constant of L and Co²⁺ is 1.63×10⁸ L·mol^?1 and the detection limit is 1.15 µmol·L^?1. Natural water samples experiments revealed that probe L can be potentially applied to the detection of Co²⁺ in real environment.     

A Novel Highly Sensitive Zeolite-Based Conductometric Microsensor for Ammonium Determination

Natural zeolite clinoptilolite was successfully applied in the sensing technology for electrochemical detection of ammonium. A novel ammonium-selective sensor was developed based on clinoptilolite, possessing intrinsic ammonium-sieving and ion exchange capacity. The sensor design allowed measurements in both differential mode and requiring no classical reference electrode. The sensor selectivity towards Na⁺, K⁺, Ca²⁺, Mg²⁺, and Al³⁺ was studied. The limit of detection and the dynamic range of the ammonium-selective conductometric microsensor, determined in the phosphate buffer solution, were 1.0 × 10^?8 M and 0–8 mM, respectively. The ammonium sensor presented high operational and storage stability.     

A rapid selective colorimetric and ‘On–Off’ fluorimetric sensor for detecting Cu2+ ions in aqueous media based on a simple bis-schiff-base derivative

A simple colorimetric and fluorimetric ‘On–Off’ sensor L (3,3′-dimethyl -[1,1′-biphenyl]-4,4′-diyl)bis(azanylylidene)bis(methanylylidene)bis(naphthalen-2-ol) for Cu²⁺ ions bearing o-tolidine substituents has been designed and synthesised, and exhibits significant fluorimetric and colorimetric response for Cu²⁺ in DMSO/H₂O (8:2, v/v) HEPES buffer (pH 7.2) solution. The detection limit of the sensor towards Cu²⁺ is 7.25 × 10^? 8 M and the association constant K_a of 9.86 × 10⁴ M^? 1 was determined. Furthermore, other anions, including Fe³⁺, Hg²⁺, Ag⁺, Ca²⁺, Co²⁺, Ni²⁺, Cd²⁺, Pb²⁺, Zn²⁺, Cr³⁺ and Mg²⁺ have almost no influence on the probe's behaviour. Test strips based on the sensor L were fabricated, which could act as convenient and efficient Cu²⁺ test kits.     

A fluorescent chemosensor for Cu2+ ions and its application in cell imaging

A new on-off fluorescent probe 1 for Cu²⁺ based on Schiff base compound was designed and synthesized by one-step reaction. The single probe 1 exhibited strong green fluorescence emission. A fluorescence quenching effect and faint color change were observed as soon as the Cu²⁺ was added to the probe system in H₂O/EtOH (v/v = 8:2, HEPES buffer, 0.05 M, pH = 7.4) solution. Other common metal cations did not cause the changes in the fluorescence and color of the probe 1. The optical properties were studied by the fluorescence emission and UV–Vis spectra. Meanwhile, the geometry optimizations of probe 1 and the [1-Cu²⁺] coordination complexes were also carried out by DFT using the Gaussian 09 program, in which the B3LYP function was used. Based on experimental measurement and theoretical analysis, we can know that the combination ratio of the probe and Cu²⁺ is 2:1 and the limit of detection (LOD) is as low as 5.3 × 10^?9 M Besides, the probe 1 was also used to analyze the Cu²⁺ in living cells.     

5-二乙胺基-2-(吡啶-2’-亚氨甲基)苯酚的合成及其对Zn2+的识别

本文利用2-氨基吡啶与4-二乙胺基水杨醛反应合成了5-二乙胺基-2-(吡啶-2’-亚氨甲基)苯酚(探针L),对其结构进行了表征。在DMSO/Tris(6:4, v/v, pH =7.4)溶液中,探针L高选择性荧光“关-开”识别Zn₂₊,在365 nm紫外灯照射下,由无荧光变成蓝色荧光。实验表明,探针L与Zn₂₊的结合比为1:1,结合常数为2.6×10₃ L. mol_-1,检测限为 9.39×10_-7mol/L,pH适用范围为7-11,并可检测水样中的Zn₂₊。     

Synthesis and evaluation of two novel rhodamine-based fluorescence probes for specific recognition of Fec+ ion

Two low cytotoxic fluorescence probes Rb1 and Rb2 detecting Fe³⁺ were synthesized and evaluated. Rb1 and Rb2 exhibited an excellent selectivity to Fe³⁺, which was not disturbed by Ag⁺, Li⁺, K⁺, Na⁺, NH₄⁺, Fe²⁺, Pb²⁺, Ba²⁺, Cd²⁺, Ni²⁺, Co²⁺, Mn²⁺, Zn²⁺, Mg²⁺, Hg²⁺, Ca²⁺, Cu²⁺, Ce³⁺, AcO^?, Br^?, Cl^?, HPO₄^2?, HSO₃^?, I^?, NO₃^?, S₂O₃^2?, SO₃^2? and SO₄^2? ions. The detection limits were 1.87 × 10^?7 M for Rb1 and 5.60 × 10^?7 M for Rb2, respectively. 1:1 stoichiometry and 1:2 stoichiometry were the most likely recognition mode of Rb1 or Rb2 towards Fe³⁺, and the corresponding OFF–ON fluorescence mechanisms of Rb1 and Rb2 were proposed.     

A new Hg2+ fluorescent sensors based on 1,3-alternate thiacalix[4]arene (L) and the complex of [L+Hg2+] as turn-on sensor for cysteine

A new thiacalix[4]arene derivative in a 1,3-alternate conformation bearing four naphthalene groups through crown-3 chains has been synthesized, which exhibits high selectivity toward Hg²⁺ by forming a 1:2 complex, among other metal ions ( Na⁺, K⁺, Mg²⁺, Ba²⁺, Ca²⁺, Sr²⁺, Cs⁺, Mn²⁺, Fe²⁺, Cd²⁺, Co²⁺, Ni²⁺, Cu²⁺, Li⁺, and Zn²⁺) with a low detection limit (3.30×10^?7 M). The metal ion-binding properties were studied by fluorescence, AFM, and ¹H NMR spectroscopy. The in situ prepared [Hg²⁺+L] complex shows well recognition ability for cysteine with a low detection limit (2.23×10^?7 M) through fluorescence turning on. The mechanism of fluorescence turning on is the host L releasing from [L+Hg²⁺] for [Cys+Hg²⁺] complex formed. Thus the paper reports secondary-sensor design: Hg²⁺ as a first sensor for [L+Hg²⁺] form, cysteine as a second sensor for Hg²⁺ releasing from the [L+Hg²⁺] complex after cysteine adding in.     

Electrocatalytic Oxidation and Voltammetric Determination of Hydrazine in Industrial Boiler Feed Water Using a Cobalt Phthalocyanine-modified Electrode

Abstract

A carbon paste electrode modified with cobalt phthalocyanine (CPECoPc) was developed and applied to the determination of hydrazine [N₂H₄] in industrial boiler feed water. The CPECoPc exhibited good electrocatalytical activity for hydrazine oxidation at pH 13. A linear correlation was obtained between anodic peak current (I_ap) and hydrazine concentration in the range of 1.25 × 10^?4 to 9.80 × 10^?4 mol L^?1, fit by the equation I_ap = 1.47 + 4.90 × 10⁵ [N₂H₄] with a correlation coefficient of 0.9967. A detection limit of 7.35 × 10^?5 mol L^?1 was obtained. Recovery of hydrazine from three samples ranged between 99.0% and 102.9%. The modified electrode showed no interference by cations commonly present in boiler water, such as K⁺, Na⁺, Ca²⁺, Mg²⁺, Al³⁺, Pb²⁺, and Zn²⁺. The results obtained for hydrazine in boiler water using the proposed modified electrode are in agreement with the data obtained by a standard spectrophotometric method, at the 95% confidence level.     

A new perylene diimide-based colorimetric and fluorescent sensor for selective detection of Cu<Superscript>2+</Superscript> cation

A new perylene diimide (PDI) ligand (1) functionalized with a dipicolylethylenediamine (DPEN) moiety was synthesized and first used as a colorimetric and fluorometric dual-channel sensor to specifically detect the presence of Cu²⁺ over a wide range of other cations. The solution of 1 (10 μmol/L) upon addition of Cu²⁺ displayed distinguishing pink color compared with other cations including K⁺, Ni²⁺, Ca²⁺, Mn²⁺, Na⁺, Sr²⁺, Zn²⁺, Co²⁺, Cd²⁺, Mg²⁺, Cr³⁺, Ag⁺, and Ba²⁺, indicating the sensitivity and selectivity of 1 to Cu²⁺. Thus, the advantage of this assay is that naked-eye detection of Cu²⁺ becomes possible. Moreover, among these metal ions investigated, only Cu²⁺ quenched more than half fluorescent intensity of 1. The ESI-TOF spectrum of a mixture of 1 and CuCl₂ in combination of the fluorescence titration spectra of 1 (10 μmol/L) upon addition of various amounts of Cu²⁺ revealed the formation of a 2:1 metal-ligand complex through the metal coordination interaction. Supported by the National Natural Science Foundation of China (Grant Nos. 20872101 & 20772086)     

Highly selective fluorescent probe based on a rhodamine B and furan-2-carbonyl chloride conjugate for detection of Fe3+ in cells

A furan-2-carbonyl chloride modified rhodamine B derivative (RBFC) has been designed and synthesized. The probe RBFC exhibited excellent sensitivity and selectivity for detection of Fe³⁺ with a 1:1 stoichiometry over other tested metal ions in a MeOH/H₂O (1:1, v/v, pH 7.36, HEPES buffer, 1.3?mM) solution. The association constant and the detection limit were calculated to be 7.28?×?10³?M^?1 and 0.437?μM based on fluorescence titration analysis. Furthermore, the probe RBFC was successfully applied in living cells, and the results indicated that the probe could monitor intracellular Fe³⁺ in MCF-7 cells.     

A ratiometric fluorescent probe for zinc ions based on the quinoline fluorophore

A ratiometric fluorescent zinc probe 1 of carboxamidoquinoline with a carboxylic acid group was designed and synthesised. Probe 1 exhibits high selectivity for sensing Zn²⁺; about a 13-fold increase in fluorescence emission intensity and an 82?nm red-shift of fluorescence emission are observed upon binding Zn²⁺ in EtOH/H₂O (1?:?1, V/V) solution. The ratiometric fluorescence response is attributed to the 1?:?1 complex formation between probe 1 and Zn²⁺ which has been utilised as the basis for the selective detection of Zn²⁺. The analytical performance characteristics of the proposed Zn²⁺-sensitive probe were investigated. The linear response range covers a concentration range of Zn²⁺ from 2.0?×?10^?6 to 5.0?×?10^?5?mol?L^?1 and the detection limit is 2.7?×?10^?7?mol?L^?1. The determination of Zn²⁺ in both tap and river water samples shows satisfactory results.     

A highly sensitive and selective naked-eye probe for detection of Fe3+ based on a 2,5-bis[3-benzyl-2-methylbenzothiazole]-croconaine

A highly sensitive and selective naked-eye probe, 2,5-bis[3-benzyl-2-methylbenzothiazole]-croconaine (BMC) for sensing of Fe³⁺ was synthesized and characterized. The BMC can selectively recognize Fe³⁺ among the test cations (Ni²⁺, Mg²⁺, Cu²⁺, Ca²⁺, Na⁺, K⁺, Cr³⁺, Ag⁺, Ba²⁺, Zn²⁺, Pb²⁺, Al³⁺, Fe³⁺, Cd²⁺, Co²⁺) in DMF/H₂O (4:1, v/v). The binding constant of BMC-Fe³⁺ was evaluated by using Benesi-Hildebrand plot. Simultaneously, the binding mode of BMC-Fe³⁺ was supporting by Job's plot, ESI-MS, FT-IR and ¹H NMR. Correspondingly, the morphology of chelate complex was investigated by FESEM. Moreover, Fe³⁺ and EDTA could be employed as inputs and the fluorescence emission intensity which was 816 nm as output so that a molecular logic gate could be realized.