主链或侧链含二茂铁的聚合物的合成和应用

由于二茂铁基聚合物独特的结构和性能,其在电化学、生物医学及光学等领域具有广阔应用前景。开发新型二茂铁基聚合物并探索其应用已经成为科研工作者的研究热点。本文主要综述主链或侧链含二茂铁的聚合物的合成及应用。其中合成主链含二茂铁的聚合物的方法主要有缩聚法和开环聚合法等。合成侧链含二茂铁的聚合物的方法主要有自由基聚合法、原子转移自由基聚合法和可逆加成断裂链转移聚合法等。最后,对二茂铁基聚合物的应用前景进行了展望。     

5,6-苯并-2-亚甲基-1,3-二氧环庚烷的活性自由基开环聚合反应

活性 (或称可控 )自由基聚合研究是目前高分子科学的研究热点之一[1～ 8] .活性自由基聚合制备的聚合物具有分子量随转化率提高而线性增加、分子量分布窄和聚合反应为一级反应动力学等特点 .自由基开环聚合所得产物体积收缩小 ,某些含有不饱和双键的螺环单体发生双开环聚合时甚至发生体积膨胀 ;开环聚合还可在聚合物主链上引入各种官能团 ,如酯基、碳酸酯基、酮基等 [9～ 12 ] .因此 ,用活性聚合的方法对自由基开环聚合的分子量和分子量分布进行控制 ,可以制备出具有各种不同结构和性能的新聚合物 . Wei等 [13] 报道了利用稳定自由基法实现…     

环形侧链聚合物刷的合成与表征

通过grafting-onto方法合成高侧链接枝密度的环形侧链聚合物刷并进行结构表征.先通过开环易位聚合(ROMP)制备带有炔基侧基的线形聚降冰片烯衍生物主链(l-PND),通过原子转移自由基聚合(ATRP)和铜催化的叠氮-炔环加成(Cu AAC)反应制备带有一个叠氮基的环形聚丙烯酸叔丁酯侧链(c-Pt BA),再利用Cu AAC反应将环形侧链高密度地接入主链,得到环形侧链聚合物刷.通过核磁氢谱(1H-NMR)、凝胶渗透色谱(GPC)和红外光谱(IR)对聚合物主/侧链及聚合物刷的结构和组成进行了表征.该聚合物刷主链聚合度为400,高接枝密度的环形侧链使主链构象伸展.聚合物刷在原子力显微镜(AFM)下呈单分子蠕虫形貌(柱状形貌),分子长度为200 nm,直径为30 nm.     

含联苯结构侧链液晶聚合物的合成及相行为的研究

液晶聚合物从结构上可分为3种:侧链型、主链型和主侧链型。侧链型液晶聚合物主要是聚丙烯酸酯类、聚硅氧烷类以及磷腈聚合物类。Gray等对聚丙烯酸酯类含不同取代基的联苯结构液晶聚合物进行了研究,结果表明无间隔基且取代基为氰基和饱和脂肪基时,该聚合物呈现近晶型液晶行为。为了增加介晶单元的长径比及刚性,本文在聚甲基丙烯酸酯侧链     

含空间位阻侧链取代炔烃的合成及其催化聚合

设计并合成了具有较大空间位阻侧链的取代炔烃2-炔丙氧基-1,4-对苯二甲酸二甲酯单体,分别采用WCl6,WCl6-SnPh4和[Rh(nbd)Cl]2催化体系使其聚合,考察了不同催化剂对聚合的影响.采用红外光谱和核磁共振等技术对单体及聚合物结构进行了表征,并用紫外光谱和荧光光谱研究了所得聚合物的光学性能.结果表明,使用[Rh(nbd)Cl]2催化剂时得到的聚合物是高反式结构,荧光光谱中除了侧基的350 nm发射峰外,还在429 nm处存在较弱的共轭主链发射.使用WCl6-SnPh4催化体系得到的聚合物由于较高的顺式含量,主要是侧基的发射,而较大侧基位阻使主链共轭降低.尽管存在较短的间隔基,引入较大空间位阻侧基仍然迫使聚合物主链扭曲,顺式结构中侧基空间位阻的影响更大.     

乙烯类聚合物的概况

乙烯类聚合物是聚合乙烯或其衍生物而成,这类单基物的分子結構里,均含有乙烯基CH_2=CH-(氟的衍生物除外)。丁二烯及其衍生物也可当作乙烯的衍生物,但这类單基物不同於前一类,聚合时可以1,2-加成及1,4-加成两种形式進行,且經常以1,4-加成为主。生成的聚合物为不饱和碳鏈,可以硫化,     

两亲性杂侧链聚合物刷的合成及其乳化功能

报道了一种随机高密度接枝亲水、疏水聚合物侧链的刷形两亲性聚合物.首先,结合可逆加成-断裂链转移(RAFT)聚合和后修饰方法,得到含叠氮侧基的聚甲基丙烯酸缩水甘油酯(PGMA-N3)作为主链;再分别合成端炔基聚苯乙烯(PS)和端炔基聚环氧乙烷(PEO),然后通过铜催化的叠氮-炔环加成反应,将疏水性PS和亲水性PEO同时高效的接到PGMA主链上,制得两亲性杂侧链的聚合物刷.由凝胶渗透色谱(SEC)分析得知,在主链叠氮基团与两侧链总炔基的摩尔投料比为1∶1的条件下,PS和PEO的接枝效率很高,都大于90%.通过调节主链长度和2种侧链的投料比,获得不同组成的聚合物刷.通过等质量的甲苯/水混合体系,考察两亲性聚合物刷的乳化能力,发现主链聚合度为100,PS∶PEO比例为70∶30的聚合物刷表现出最佳的乳化性能.     

含1,3,4-噁二唑甲壳型液晶聚合物的合成与表征

甲壳型液晶聚合物（mesogen-jacketed liquid crystal polymer,MJLCP）是1987年由周其凤教授[1]首先提出的概念.从化学结构看,甲壳型液晶聚合物属于侧链型,由烯类单体经链式聚合制得,容易得到高分子量的产物,具有一般柔性侧链型液晶聚合物的一些优点.但是与柔性侧链型液晶聚合物不同的是,MJLCP分子中的刚性液晶基元是通过腰部或重心位置与主链相联结的,在主链与刚性液晶基元的侧基之间只有很短或者没有柔性间隔基.由于在这类液晶聚合物的分子主链周围空间内刚性液晶基元的密度很高,分子主链被由液晶基元形成的外壳所包裹并被迫采取相对伸直的刚性链构象.因此,这类液晶聚合物又和主链型刚性链液晶聚合物相似,具有较明显的链刚性.近年来,周其凤课题组围绕甲壳型液晶聚合物深入开展了分子设计与合成、分子结构与性能等多方面的研究.其中,设计合成具有特定功能的甲壳型液晶聚合物是在以往研究工作和学科交叉融合的基础上发展起来的一项新的研究工作.将一些有特殊功能的基团引入到甲壳型液晶聚合物中会使其具有崭新的特性.     

基团转移聚合制备侧链型联苯液晶高分子的研究

<正> 由具有刚性介晶结构同时又具有双键的单体进行加聚反应,是制备侧链型液晶高分子最方便的方法。大多采用甲基丙烯酸酯或丙烯酸酯类,聚合后形成乙烯型柔性主链,同时侧链上又带有刚性介晶相结构单元。以联苯类作为介晶相的液晶,由于具有稳定性好的优点,是目前应用得最广泛的一种液晶材料。Maganini用自由基聚合的方法进行了侧链型联苯液晶高分子的合成和研究。基团转移聚合作为一种新的加聚方式,为丙     

高密度柱状聚合物刷的合成

通过铜催化的叠氮-炔偶联反应(CuAAC),利用grafting-onto方法合成每个主链重复单元带有多于一条侧链的高接枝密度的柱状聚合物刷.首先,合成了带有缩酮保护的甲基丙烯酸2,2-双羟甲基丙酯单体(bisMPMA),并通过可逆加成-断裂链转移(RAFT)聚合得到窄分子量分布的线形聚合物.在酸性条件下脱去缩酮保护后,以羟基与戊炔酸酐的酯化反应,得到了每个重复单元带有2个炔基的聚合物主链.之后,利用高效的CuAAC反应,将末端带有叠氮基团的聚环氧乙烷(PEO)或聚苯乙烯(PS)侧链接枝到主链上,用核磁共振氢谱(1H-NMR)和体积排阻色谱(SEC)等对聚合物刷的结构进行表征.     

Direct electrochemistry and electrocatalysis of reduced glutathione on CNFs-PDDA/PB nanocomposite film modified ITO electrode for biosensors

The electrochemical oxidation of reduced glutathione (GSH) catalyzed by electro generated Berlin green at carbon nanofibers-poly(diallyldimethylammonium chloride)/Prussian blue (CNFs-PDDA/PB) nanocomposite film modified ITO electrode has been studied. The CNFs-PDDA/PB nanocomposite film were fabricated by casting the composite CNFs enfolded PDDA on ITO electrode followed by electrochemical deposition of PB on the CNFs-PDDA matrix using cyclic voltammetry (CV). Electron microscopy (TEM, AFM), and Fourier transform infrared spectroscopy (FT-IR) studies were used to characterize the morphology and structure of the nanocomposite. The fabricated CNFs-PDDA/PB/ITO nanocomposite film electrode shows significant improvement of redox activity of PB due to the excellent electron transfer ability of CNFs. It was also found to possess prominent electrocatalytic activity toward the oxidation of glutathione with high sensitivity as high as 2.07 μA dm(3) mol(-1) cm(-2). A nontoxic, stable and convenient method for the detection of GSH in the concentration range of 6.0×10(-6) to 1.74×10(-5) M has been developed and it showed improved sensor performance compared to the unmodified PB electrode. The high sensitivity, wider linear range, good reproducibility, and the minimal surface fouling make this CNFs/PDDA/PB nanocomposite film a promising candidate for GSH sensors.     

How to Build Prussian Blue Based Water Oxidation Catalytic Assemblies: Common Trends and Strategies

Prussian blue (PB) and its analogues (PBAs) have at least a three-century-long history in coordination chemistry. Recently, cobalt-based PBAs have been acknowledged as efficient and robust water oxidation catalysts. Given the flexibility in their synthesis, the structure and morphology of cobalt-based PBAs have been modified for enhanced catalytic activity under electrochemical (EC), photocatalytic (PC), and photoelectrochemical (PEC) conditions. Here, in this review, the work on cobalt-based PBAs is presented in four sections: i) electrocatalytic water oxidation with bare PBAs, ii) photocatalytic processes in the presence of a photosensitizer (PS), iii) photoelectrochemical water oxidation by coupling PBAs to proper semiconductors (SCs), and iv) the utilization of PBA-PS assemblies coated on SCs for the dye-sensitized photoelectrochemical water oxidation. This review will guide readers through the structure and catalytic activity relationship in cobalt-based PBAs by describing the role of each structural component. Furthermore, this review aims to provide insight into common strategies to enhance the catalytic activity of PBAs.     

Polybenzoin Based Sensor for Determination of 2thiouracil in Biological Fluids and Pharmaceutical Formulations

A carbon paste electrode was modified by electropolymerisation of benzoin using voltammetric technique. A novel polybenzoin modified carbon paste electrode (PB‐CPE) was developed for use as a detector in cyclic voltammetry and differential pulse adsorptive stripping voltammetry for the sensitive determination of 2thiouracil (2TU). The atomic force microscopy was applied to characterize the surface morphology of PB‐CPE. The modified electrode showed excellent electrocatalytic activity for the oxidation of 2TU. The oxidation process was irreversible over the pH range studied and exhibited a diffusion controlled behavior. All experimental parameters have been optimized. The peak current for the stripping of 2TU was found to be linear over the concentration range of 0.2–1.2 µM, with a detection limit of 2.21 nM. The practical application of the PB‐CPE in the determination of 2TU in human biological fluids and pharmaceutical samples were demonstrated that it has high sensitivity and good selectivity.     

Immobilization of Prussian blue nanoparticles onto thiol SAM modified Au electrodes for analysis of DL-homocysteine

Prussian blue (PB) nanoparticles were immobilized onto gold electrodes using L-cysteine, 1,3-propanedithiol, and 1,8-octanedithiol as a bridge between the gold surface and the PB nanoparticles by the self-assembly method. The obtained PB/thiol/Au electrodes exhibit direct and indirect electrocatalytic activity toward DL-homocysteine (HCys) oxidation. It is possible for these PB nanoparticles modified electrodes to be used for the determination of HCys. The text was submitted by the authors in English.     

普鲁士蓝/多壁碳纳米管修饰电极测定维生素C

利用电化学方法在多壁碳纳米管修饰的玻碳电极表面聚合一层普鲁士蓝,制备普鲁士蓝/多壁碳纳米管修饰玻碳电极,运用循环伏安法研究了维生素C(vc)在该修饰电极上的电化学行为.该修饰电极对Vc显示出快速的电化学响应和较好的电催化活性,在pH为4.0的磷酸盐溶液中,Ve浓度与其氧化峰电流在8.0×10-4～1.0×10-2 mol/L范围内呈现良好的线性关系,相关系数为0.9993,检测限为6.4×10-5mol/L.该电极具有较好的稳定性和重现性.     

Acetylcholinesterase sensor based on screen-printed carbon electrode modified with prussian blue

Acetylcholinesterase (ChE) sensor based on Prussian blue (PB) modified electrode was developed and tested for the detection of organophosphorus and carbamic pesticides. The signal of the sensor was generated in PB mediated oxidation of thiocholine recorded at+200 mv in DC mode. ChE from electric eel was immobilized by cross-linking with glutaraldehyde in the presence of bovine serum albumin (BSA) on the surface of screen-printed carbon electrode covered with PB and Nafion. The content of the surface layer (specific enzyme activity, Nafion and BSA amounts) was optimized to establish high and reliable response toward the substrate and ChE inhibitors. The ChE/PB sensor makes it possible to detect Aldicarb, Paraoxon and Parathion-Methyl with limits of detection 30, 10 and 5 ppb, respectively (incubation 10 min). The feasibility of practical application of the ChE/PB sensor developed for the monitoring of degradation of the pesticides in wine fermentation was shown. To diminish matrix interferences, the electrolysis of the grape juice with Al anode and evaporation of ethanol were suggested, however the procedures decrease the sensitivity of pesticide detection and stability of the sample tested.     

A novel Prussian blue‐magnetite composite synthesized by self‐template method and its application in reduction of hydrogen peroxide

A novel Prussian blue (PB)‐Fe₃O₄ composite has been prepared for the first time by self‐template method using PB as the precursor. According to this method, Fe₃O₄ nanoparticles distributed uniformly on the surface of PB cube. The feed ratio of sodium acetate to PB has been proved to be a key factor for magnetic properties and electro‐catalysis properties of the composite. Under the experimental conditions, the saturation magnetization value (Ms) of PB‐Fe₃O₄–2 composite was 22 emug^?1, while the Ms value of other samples reduced. The composites also showed a good peroxidase‐like activity for the oxidation of substrate 3,3,5,5‐tetramethylbenzidine (TMB) in the presence of H₂O₂. The catalytic reduction of hydrogen peroxide capacity was PB‐Fe₃O₄–1> PB‐Fe₃O₄–2> PB‐Fe₃O₄–3> PB‐Fe₃O₄–0, which confirmed the Fe(II) centres in PB surface and Fe₃O₄ nanoparticles had synergistic effect on catalytic reduction of hydrogen peroxide.     

Photo-degradation and photo-stabilisation of the two-phase system poly(vinyl chloride)-polybutadiene

The photo-oxidative degradation of poly(vinyl chloride) (PVC)/polybutadiene (PB) blends has been studied. After uv irradiation, photo-grafting of the PVC and PB phases was observed. Photolysis of PVC accelerates cis-trans isomerisation of PB. Both phases, PVC and PB, are photo-degraded according to free radical oxidation mechanisms. The rates of these processes can be decreased by the addition of metal chelates, such as commercially produced Cyasorb uv light absorber 1084 (2,2′-thiobis(4-t-octylphenolato)-n-butylamine nickel(II)) and Cyasorb uv light absorber 2548 (cobalt dicyclohexyldithiophosphinate).     

Electroanalytical Properties of ITO Electrodes Modified with Environment‐Sensitive Poly(N‐isopropylacrylamide) Gel and Prussian Blue

It has been shown that ITO electrodes could be modified with a volume‐phase‐transition gel based on poly(N‐isopropylacrylamide) cross‐linked with N,N′‐methylenebisacrylamide. Prussian blue (PB) was deposited electrochemically inside the gel while glucose oxidase was added at the time of electropolymerization. The electrocatalytic activity of glucose oxidase towards the oxidation of glucose (measured as the reduction current of hydrogen peroxide) was strongly depressed by the shrinking process. Since the volume phase transition triggered by the temperature change is reversible the obtained change in the enzyme activity may be useful for getting a switchable system.     

Stability of Prussian Blue films on ITO electrodes: effect of different anions

Transformation of insoluble newly deposited Prussian Blue (PB) into the soluble structure stabilizes the film and allows its total oxidation to Prussian Yellow. The stability of PB films in electrochemical processes in successive potential cycling experiments and under long-term chemical attack by an electrolyte depends not only on the cation that takes part but also on the nature of the anion present. In aqueous media, the sulphate ion clearly destabilizes the crystalline structure whereas the nitrate ion favours stabilization. Initial changes in the voltammograms recorded immediately after the spectroscopic tests have been detected in all media. During the immersion period water molecules and ions enter the film and affect the redox processes. With time the ions arrange themselves in the heart of the lattice and the water molecules are lost, and the blocking of the redox processes disappears.