Carbon nanotube-enhanced electrochemical DNA biosensor for DNA hybridization detection

A novel and sensitive electrochemical DNA biosensor based on multi-walled carbon nanotubes functionalized with a carboxylic acid group (MWNTs-COOH) for covalent DNA immobilization and enhanced hybridization detection is described. The MWNTs-COOH-modified glassy carbon electrode (GCE) was fabricated and oligonucleotides with the 5'-amino group were covalently bonded to the carboxyl group of carbon nanotubes. The hybridization reaction on the electrode was monitored by differential pulse voltammetry (DPV) analysis using an electroactive intercalator daunomycin as an indicator. Compared with previous DNA sensors with oligonucleotides directly incorporated on carbon electrodes, this carbon nanotube-based assay with its large surface area and good charge-transport characteristics dramatically increased DNA attachment quantity and complementary DNA detection sensitivity. This is the first application of carbon nanotubes to the fabrication of an electrochemical DNA biosensor with a favorable performance for the rapid detection of specific hybridization.     

A simple and ultrasensitive electrochemical DNA biosensor based on DNA concatamers

A simple, ultrasensitive and selective electrochemical DNA biosensor based on DNA concatamers is described, which can detect as low as 100 aM target DNA even in complex samples.     

A label-free electrochemical biosensor based on a DNA aptamer against codeine

In order to develop a sensor for opium alkaloid codeine detection, DNA aptamers against codeine were generated by SELEX (systematic evolution of ligands by exponential enrichment) technique. An aptamer HL7-14, which is a 37-mer sequence with K_d values of 0.91 μM, was optimized by the truncation-mutation assay. The specificity investigation shows that HL7-14 exhibits high specificity to codeine over morphine, and almost cannot bind to other small molecule. With this new selected aptamer, a novel electrochemical label-free codeine aptamer biosensor based on Au-mesoporous silica nanoparticles (Au-MSN) as immobilized substrate has been proposed using [Fe(CN)₆]^3−/4− as electroactive redox probe. The linear range covered from 10 pM to 100 nM with correlation coefficient of 0.9979 and the detection limit was 3 pM. Our study demonstrates that the biosensor has good specificity, stability and well regeneration. It can be used to detect codeine.     

Towards a fast-responding,label-free electrochemical DNA biosensor

DNA sensors and sensor arrays (biochips) have become an important tool in molecular biology and biotechnology in recent years. For low-throughput, easy-to-use devices it is desirable that they be of low cost, reagentless, and label-free. Displacement sensors with electrochemical detection offer these advantages, and therefore the development of such a detection principle is show in this work. An HRP-labeled oligonucleotide was sub-optimally pre-hybridized with a capture probe and was displaced upon introduction of the fully complementary probe target, producing a decrease in signal that was proportional to the sample concentration. This detection scheme has been demonstrated colorimetrically and electrochemically, obtaining a total signal displacement of 55% only 5 min after introduction of the sample.     

DNA hybridization electrochemical biosensor using a functionalized polythiophene

A simple and label-free electrochemical sensor for recognition of the DNA sensor event was prepared by electrochemical polymerization of 4-hydroxyphenyl thiophene-3-carboxylate. Poly(4-hydroxyphenyl thiophene-3-carboxylate) (PHPT) was synthesized electrochemically onto glassy carbon electrode and characterized by cyclic voltammetry, FTIR and AFM measurements. An ODN-probe was physisorbed onto PHPT film and tested on hybridization with complementary ODN segments. A biological recognition can be monitored by comparison with electrochemical signal (cyclic voltammogram) of single and double strand state oligonucleotide. The oxidation current of double strand state oligonucleotide is lower than that of single strand, that is corresponding to the decrease of electroactivity of PHPT with the increase of stiffness of polymer structure. Physisorbed ODN-probe and its hybridization were observed morphologically onto ITO electrodes using AFM. The sensitivity of the electrochemical sensor is 0.02 μA/nmol, detection limit is 1.49 nmol and it has good selectivity.     

A novel electrochemical SPR biosensor

In this paper, we demonstrate for the first time that upon electrochemical oxidation/reduction, the transition in the conductivity of polyaniline (PAn) film on gold electrode surface leads to a large change of surface plasmon resonance (SPR) response due to a change in the imaginary part of dielectric constant of PAn film. Based on the amplifying response of SPR to the redox transformation of PAn film as a direct result of the enzymatic reaction between horseradish peroxidase (HRP) and PAn in the presence of H₂O₂, a novel PAn-mediated HRP sensor has been fabricated. The electrochemical SPR biosensor, unlike a usual binding assay with SPR, can afford a larger SPR response, and can also be reused by reducing the PAn film electrochemically to its reduced state. This method opens up a new route to the fabrication of SPR biosensor.     

Development of a lipase-based optical assay for detection of DNA

A lipase-based assay for detection of specific DNA sequences has been developed. Lipase from Candida antarctica was conjugated to DNA and captured on magnetic beads in a sandwich assay, in which the binding was dependent on the presence of a specific target DNA. For amplification and to generate a detectable readout the captured lipase was applied to an optical assay that takes advantage of the enzymatic activity of lipase. The assay applies p-nitrophenol octanoate (NPO) as the substrate and in the presence of lipase the ester is hydrolyzed to p-nitrophenolate which has a strong absorbance at 405 nm. The method provides detection a detection limit of 200 fmol target DNA and it was able to distinguish single base mismatches from the fully complementary target.     

A cyclodextrin host-guest recognition approach to a label-free electrochemical DNA hybridization biosensor

A novel label-free electrochemical DNA hybridization biosensor using a β-cyclodextrin/poly(N-acetylaniline)/carbon nanotube composite modified screen printed electrode (CD/PNAANI/CNT/SPE) has been developed. The proposed DNA hybridization biosensor relies on the intrinsic oxidation signals of guanine (G) and adenine (A) from single-stranded DNA entered into the cyclodextrin (CD) cavity. Due to the binding of G and A bases to complementary cytosine and thymine bases in dsDNA, the signals obtained for ssDNA were much higher than that of dsDNA. The synergistic effect of the multi-walled carbon nanotubes provides a significantly enhanced voltammetric signal, and the CD encapsulation effect makes anodic peaks of G and A shift to less positive potentials than that at the bare SPE. The peak heights of G and A signals are dependent on both the number of the respective bases in oligonucleotides and the concentration of the target DNA sequences. Hybridization of complementary strands was monitored through the measurements of oxidation signal of purine bases, which enabled the detection of target sequences from 0.01 to 1.02 nmol μl(-1) with the detection limit of target DNA as low as 5.0 pmol μl(-1) (S/N = 3). Implementation of label-free and homogeneous electrochemical hybridization detection constitutes an important step toward low-cost, simple, highly sensitive and accurate DNA assay. Discrimination between complementary, noncomplementary, and two-base mismatch targets was easily accomplished using the proposed electrode.     

A novel electrochemical biosensor for detection of cholesterol

We report on a highly sensitive electrochemical biosensor for determination of cholesterol. The biosensor was fabricated by co-immobilizing bi-enzymes, cholesterol oxidase (ChOx), and horseradish peroxidase (HRP). Voltammetric technique such as cyclic voltammetry and impedance experiment were used to study the characterization of modified electrode step by step. The developed sensor is cheap, disposable, portable and exhibits higher sensitivity. The biosensor expressed a wide linear range up to 300 mg dL^–1 in a physiological condition (pH 7.0), with a correlation coefficient of 0.9969. A sensitivity of 13.28 μA mg^–1 dL cm^?2 which makes it very promising for the clinical determination of cholesterol.     

An electrochemical DNA biosensor based on the "Y" junction structure and restriction endonuclease-aided target recycling strategy

Based on the "Y" junction structure and restriction endonuclease-aided target recycling strategy, an electrochemical biosensor for DNA detection was developed. This universal biosensor was suitable for detecting different sequences of target DNA by changing the sequence of capture and assistant strands.     

A universal electrochemical biosensor for the highly sensitive determination of microRNAs based on isothermal target recycling amplification and a DNA signal transducer triggered reaction

MicroRNAs (miRNAs) play a considerable role in cancer occurrence and development, and have been identified as promising noninvasive biomarkers. The authors describe a voltammetric method for the determination of the cancer biomarker microRNA-21 (miRNA). It is based on a combination of a universal DNA signal transducer and isothermal target recycling amplification. A hairpin capture probe is bound to the target miRNA to form a duplex structure and to create a toehold in the transducer for initiating the target recycling amplification reaction. In contrast to traditional capture probes, a mismatched site is introduced to improve its ability to capture the target. In order to reduce the complex design procedures of the sequence and widen the applicability of this method, a signal transducer is introduced. Under optimal conditions, response to target miRNA is linear in the 0.5 to 2000 pM concentration range, with a 56 fM. detection limit (at an S/N ratio of 3). In order to characterize the process of target recycling and the stepwise modification of the electrode, real-time fluorescence, agarose gel electrophoresis, cyclic voltammetry, electrochemical impedance spectroscopy and chronocoulometry were used. The results indicate that this isothermal target recycling amplification results in an electrochemical biosensing scheme with wide potential for sensing other bioanalytes.

Open image in new window

Graphical abstract Schematic illustration of the electrochemical biosensing platform for miRNA-21 detection based on isothermal target recycling amplification and DNA signal transducer triggered strategy.

     

Tetrahedron-structured DNA and functional oligonucleotide for construction of an electrochemical DNA-based biosensor

Tetrahedron-structured DNA (ts-DNA) in combination with a functionalized oligonucleotide was used to develop a "turn-on" biosensor for Hg(2+) ions. The ts-DNA provided an improved sensitivity and was used to block the active sites.     

Enzyme-based electrochemical biosensor for sensitive detection of DNA demethylation and the activity of DNA demethylase

A novel electrochemical method is developed for detection of DNA demethylation and assay of DNA demethylase activity. This method is constructed by hybridizing the probe with biotin tagged hemi-methylated complementary DNA and further capturing streptavidin tagged alkaline phosphatase (SA-ALP) to catalyze the hydrolysis reaction of p-nitrophenyl phosphate. The hydrolysate of p-nitrophenol (PNP) is then used as electrochemical probe for detecting DNA demethylation and assaying the activity of DNA demethylase. Demethylation of target DNA initiates a degradation reaction of the double-stranded DNA (dsDNA) by restriction endonuclease of BstUI. It makes the failed immobilization of ALP, resulting in a decreased electrochemical oxidation signal of PNP. Through the change of this electrochemical signal, the DNA demethylation is identified and the activity of DNA demethylase is analyzed with low detection limit of 1.3 ng mL⁻¹. This method shows the advantages of simple operation, cheap and miniaturized instrument, high selectivity. Thus, it provides a useful platform for detecting DNA demethylation, analyzing demethylase activity and screening inhibited drug.     

A regenerative ratiometric electrochemical biosensor for selective detecting Hg based on Y-shaped/hairpin DNA transformation

Inspired by dual-signaling ratiometric mechanism which could reduce the influence of the environmental change, a novel, convenient, and reliable method for the detection of mercury ions (Hg²⁺) based on Y-shaped DNA (Y-DNA) was developed. Firstly, the Y-DNA was formed via the simple annealing way of using two different redox probes simultaneously, omitting the multiple operation steps on the electrode. The Y-DNA was immobilized on the gold electrode surface and then an obvious ferrocene (Fc) signal and a weak methylene blue (MB) signal were observed. Upon addition of Hg²⁺, the Y-DNA structure was transformed to hairpin structure based on the formation of T-Hg²⁺-T complex. During the transformation, the redox MB gets close to and the redox Fc gets far away from the electrode surface, respectively. This special design allows a reliable Hg²⁺ detection with a detection range from 1 nM to 5 μM and a low detection limit down to 0.094 nM. Furthermore, this biosensor exhibits good selectivity and repeatability, and can be easily regenerated by using l-cysteine. This study offers a simple and effective method for designing ratiometric biosensors for detecting other ions and biomolecules.     

A sensitive electrochemical biosensor for detection of DNA methyltransferase activity by combining DNA methylation-sensitive cleavage and terminal transferase-mediated extension

A novel electrochemical biosensor was developed for activity assay of DNA methyltransferase and its inhibitor based on methylation-sensitive cleavage, which activated a primer for terminal transferase-mediated extension of biotinylated dUTP followed by sensitive detection via enzymatic amplification.     

Microfluidic integration for electrochemical biosensor applications

Electrochemical biosensors are particularly suitable for miniaturization and integration in microfluidic devices. Applications include the detection of whole cells, cell components, proteins, and small molecules to address tasks in the fields of diagnostics and food and environmental control. Microfluidic setups range from simple channels for sample transport to channels with integrated sensing electrodes to highly sophisticated platforms with additional elements for sample preparation. The design of the microfluidics depends on both the type of detection and on the application and sample material. This review summarizes recent work on electrochemical biosensors with integrated microfluidics with the focus on developments for real sample applications, particularly those including measurements with real sample media.     

An electrochemical biosensor for direct detection of DNA using polystyrene-g-soya oil-g-imidazole graft copolymer

A label-free electrochemical DNA biosensor was developed through the attachment of polystyrene-g-soya oil-g-imidazole graft copolymer (PS-PSyIm) onto modified graphene oxide (GO) electrodeposited on glassy carbon electrode (GC). GC/GO electrode was initially functionalised via electrochemical reduction of 4-nitrobenzene diazonium salt, followed by the electrochemical reduction of NO₂ to NH₂. Subsequent to the electrochemical deposition of gold nanoparticles on modified surface, the attachment of the PS-PSyIm graft copolymer on the resulting electrode was achieved. The interaction of PS-PSyIm with DNA at the bare glassy carbon electrode was studied by cyclic voltammetry technique, and it was found that interaction predominantly takes place through intercalation mode. The selectivity of developed DNA biosensor was also explored by DPV on the basis of considering hybridisation event with non-complementary, one-base mismatched DNA and complementary target DNA sequence. Large decrease in the peak current was found upon the addition of complementary target DNA. The sensitivity of the developed DNA biosensor was also investigated, and detection limit was found to be 1.20 nmol L^?1.     

An ultrasensitive electrochemical biosensor for detection of DNA species related to oral cancer based on nuclease-assisted target recycling and amplification of DNAzyme

A simple, label-free, ultra-highly sensitive and selective electrochemical sensor based on nuclease-assisted target recycling and DNAzyme for the detection of DNA species related to oral cancer in saliva is developed.     

A dual-signalling electrochemical DNA sensor based on target hybridization-induced change in DNA probe flexibility

We report a fully covalent, dual-signalling electrochemical DNA sensor that exploits competitive binding and target hybridization-induced change in probe flexibility for simple and robust detection of target DNA.