Colorimetric detection of Fe3+ ions using pyrophosphate functionalized gold nanoparticles

A sensitive, selective colorimetric Fe(3+) detection method has been developed by using pyrophosphate functionalized gold nanoparticles (P(2)O(7)(4-)-AuNPs). Gold nanoparticles were prepared by reducing HAuCl(4) with sodium borohydride, in the presence of Na(4)P(2)O(7). IR spectra suggested that pyrophosphates were capped on the surface of the gold nanoparticles. Aggregation of P(2)O(7)(4-)-AuNPs was induced immediately in the presence of Fe(3+) ions, yielding a color change from pink to violet. This Fe(3+)-induced aggregation of P(2)O(7)(4-)-AuNPs was monitored using first the naked eye and then UV-vis spectroscopy with a detection limit of 5.6 μM. The P(2)O(7)(4-)-AuNPs bound by Fe(3+) showed excellent selectivity compared to other metal ions (Ca(2+), Cd(2+), Co(2+), Fe(2+), Hg(2+), K(+), Mg(2+), Mn(2+), Na(+), Ni(2+), Pb(2+), and Zn(2+)). The best detection of Fe(3+) was achieved in a pH range from 3 to 9. In addition, the P(2)O(7)(4-)-AuNPs were also used to detect Fe(3+) in lake water samples, with low interference.     

Colorimetric detection of immunoglobulin G by use of functionalized gold nanoparticles on polyethylenimine film

A method based on use of functionalized gold nanoparticles on polyethylenimine film has been developed for colorimetric detection of immunoglobulin G (IgG). The immunogold nanoparticles were immobilized on quartz slides by recognition between antibody and antigen, with the antigen chemically adsorbed on the polyethylenimine film. By measurement of the UV–visible spectra of the immobilized immunogold, detection of h-IgG was achieved. The detection limit for h-IgG by use of this method can be as low as 0.01 μg mL⁻¹. This method is quite promising for numerous applications in immunoassay. Figure     

Colorimetric detection of D-amino acids based on anti-aggregation of gold nanoparticles

A new method has been proposed to realize the visual detection of D-amino acids(DAAs) via the antiaggregation of 4-mercaptobenzoic acid modified gold nanoparticles(AuNPs) in the presence of D-amino acid oxidase(DAAO). The negatively charged AuNPs were prepared using sodium citrate as a reducer and stabilizer. The presence of 4-mercaptobenzoic acid(4-MBA) and Cu2+induces the aggregation of AuNPs,resulting in a color change from ruby red to royal purple. However, DAAO could oxidize DAAs to generate H2O2. In the presence of H2O2, the mercapto(–SH) group in 4-mercaptobenzoic acid can be oxidized to form a disulfide(–S–S–) bond. Based on these facts, the pre-incubation of DAAs and 4-mercaptobenzoic acid with DAAO would significantly reduce the concentration of free 4-mercaptobenzoic acid molecules,thus the aggregation of AuNPs was interrupted since due to the lack of inducer. As the concentration of DAAs increases, the color of the AuNPs solution would progress from royal purple to ruby red.Consequently, DAAs could be monitored by the colorimetric response of AuNPs using a UV–vis spectrophotometer or even naked eyes. This DAAO mediated visual detection method could determine Dalanine(D-Ala) as a representative DAA with concentrations ranging from 1.5×10~(-7)mol L~(-1) to 3.0×10~(-5)mol L~(-1), and the detection limit was as low as 7.5×10~(-8)mol L~(-1). The proposed method is convenient, low-cost and free of complex equipment, making it feasible to analyze the concentration of D-Ala in real samples of b-amyloid peptide(Aβ1–42).     

Colorimetric recognition and sensing of nitrite with unmodified gold nanoparticles based on a specific diazo reaction with phenylenediamine

A colorimetric sensor for nitrite ion with high selectivity and sensitivity by unmodified citrate-capped gold nanoparticles (Au NPs) is presented. Recognition of nitrite is developed on the basis of a highly specific diazo reaction between nitrite and phenylenediamine (PDA). PDA caused the Au NPs to aggregate owing to the strong covalent NH-Au bond, with a clear color change of solution from red to blue being visualized. In the presence of phosphoric acid and nitrite, the amines of PDA would readily be converted to diazo bonds, and a red solution was observed after the subsequent addition of Au suspension due to the much less strength of electrostatic interaction between the positive diazo groups and the negative citrate-capped Au NPs. With this colorimetric "light-up" method, <1 ppm of nitrite can be easily detected within 5 min at room temperature without instrumentation. Since the diazo reaction and the colorimetric response are separate, this approach features the use of pristine Au NPs in an assay where acidic environment is a necessity, making it a more convenient and cost-effective method for the sensing of nitrite when compared with those utilizing chemically modified Au NPs.     

Colorimetric determination of the pesticide chlorothalonil based on the aggregation of gold nanoparticles

A method is described for the determination of the pesticide chlorothalonil (CLT). It is based on the finding that citrate-capped gold nanoparticles (AuNPs) undergo aggregation on exposure to chlorothalonil. This is accompanied by a visually detectable color change from wine red to blue. The effect is due to the interaction of the cyano group of chlorothalonil with gold nanoparticles. The assay may also be performed by using a spectrometer. The ratio of absorbances at 700 nm and 520 nm (A₇₀₀/A₅₂₀) linearly drops in the 5 to 100 ng·mL^?1 CLT concentration range, with a 3.6 ng·mL^?1 detection limit. This is below the Chinese guideline value for cucumber. The method is rather simple and does not require any modification of the AuNPs or the utilization of antibody. It was successfully applied to the determination of CLT in (spiked) cucumber samples. Recoveries ranged from 80.4 to 97.4%, and the analytical results compared well with those obtained by HPLC.

Open image in new window

Graphical abstract Schematic of the assay. The strong interaction of the cyano group of acetamiprid with gold nanoparticles (AuNPs) via Au-N bond induces the aggregation of gold nanoparticles, and this is accompanied by a color change from red to purple.

     

Colorimetric detection of kanamycin based on analyte-protected silver nanoparticles and aptamer-selective sensing mechanism

In this work, a novel colorimetric detection method for kanamycin (Kana), a widely used aminoglycoside antibiotic, has been developed using unmodified silver nanoparticles (AgNPs) as sensing probe. The method is designed based on the finding that the analyte (Kana) can protect AgNPs against salt-induced aggregation, and nucleic acid aptamers can decrease the risk of false positives through an aptamer-selective sensing mechanism. By use of the proposed method, selective quantification of Kana can be achieved over the concentration range from 0.05 to 0.6 μg mL⁻¹ within 20 min. The detection limit is estimated to be 2.6 ng mL⁻¹, which is much lower than the allowed maximum residue limit. Further studies also demonstrate the applicability of the proposed method in milk samples, revealing that the method may possess enormous potential for practical detection of Kana in the future.     

Photochemistry of ruthenium trisbipyridine functionalized on gold nanoparticles

Design of nanohybrid systems possessing several ruthenium trisbipyridine (Ru(bpy)(3)(2+)) chromophores on the surface of gold nanoparticles, by adopting a place exchange reaction, was reported and their photophysical properties were tuned by varying the density of chromophores. The charge shift between the excited and ground-state Ru(bpy)(3)(2+) chromophores was reported for the first time, leading to the formation of Ru(bpy)(3)(+) and Ru(bpy)(3)(3+). Electron-transfer products were not observed on decreasing the concentration of Ru(bpy)(3)(2+) functionalized on Au nanoparticles or in a saturated solution of unbound chromophores. The close proximity of the chromophores on periphery of the gold core may lead to an electron transfer reaction and the products sustained for several nanoseconds before undergoing recombination, probably due to the stabilizing effect of the polar ethylene glycol moieties embedded between the chromophore groups.     

Colorimetric detection of lysozyme based on electrostatic interaction with human serum albumin-modified gold nanoparticles

In this study, an aqueous solution of 13-nm gold nanoparticles (AuNPs) covalently bonded with human serum albumin (HSA) was used for sensing lysozyme (Lys). HSA molecules were good stabilizing agents for AuNPs in high-salt solution and exhibited the ability to bond with Lys electrostatically. The aggregation of HSA-AuNPs was achieved upon the addition of high-pI proteins, such as Lys, alpha-chymotrypsinogen A, and conalbumin. Not the same was achieved, however, when low-pI proteins such as ovalbumin, bovine serum albumin, and alpha-lactalbumin were added. Matrix-assisted desorption/ionization mass spectrometry was used to demonstrate the interaction between HSA-AuNPs and Lys. It was found that the sensitivity of HSA-AuNPs for Lys was highly dependent on the HSA concentration. The Lys-induced aggregation of HSA-AuNPs was suggested based on the London-van der Waals attractive force. We further improved the selectivity of the probe by adjusting the pH solution to 8.0. Under the optimum conditions, the selectivity of this system for Lys over other proteins in high-salt solutions was remarkably high, even when their pI was very close to the Lys. The lowest detectable concentration of Lys in this approach was 50 nM. The applicability of the method was validated through the analyses of Lys in chicken egg white.     

Colorimetric adenosine aptasensor based on DNA cycling amplification and salt-induced aggregation of gold nanoparticles

An aptamer based assay is described for the colorimetric detection of adenosine. The presence of adenosine triggers the deformation of hairpin DNA oligonucleotide (HP1) containing adenosine aptamer and then hybridizes another unlabeled hairpin DNA oligonucleotide (HP2). This leads to the formation of a double strand with a blunt 3′ terminal. After exonuclease III (Exo III)-assisted degradation, the guanine-rich strand (GRS) is released from HP2. Hence, the adenosine-HP1 complex is released to the solution where it can hybridize another HP2 and initiate many cycles of the digestion reaction with the assistance of Exo III. This leads to the generation of a large number of GRS strands after multiple cycles. The GRS stabilize the red AuNPs against aggregation in the presence of potassium ions. If, however, GRS forms a G-quadruplex, it loses its ability to protect gold nanoparticles (AuNPs) from salt-induced AuNP aggregation. Therefore, the color of the solution changes from red to blue which can be visually observed. This colorimetric assay has a 0.13 nM detection limit and a wide linear range that extends from 5 nM to 1 μM.

Open image in new window

Graphical abstract Schematic presentation of a colorimetric aptamer biosensor for adenosine detection based on DNA cycling amplification and salt-induced aggregation of gold nanoparticles.

     

Colorimetric detection of apoptosis based on caspase-3 activity assay using unmodified gold nanoparticles

A new label-free method for the detection of apoptosis was proposed based on colorimetric assay of caspase-3 activity using an unlabeled Asp-Glu-Val-Asp (DEVD)-containing peptide substrate and unmodified gold nanoparticles (AuNPs).     

Polymer-mediated chain-like self-assembly of functionalized gold nanoparticles

We report an easy solution phase template-based method to assemble mercaptoundecanoic acid-functionalized gold nanoparticles (MUA-GNPs) along poly(ethylene oxide) (PEO) chains. Transmission electron microscopy (TEM) images show one-dimensional and two-dimensional chain-like sequences of GNPs resembling PEO chains. The progress of the assembly was monitored by the evaluation of surface plasmon resonance band of MUA-GNPs with time by UV-vis spectroscopy. The assembly process is a result of hydrogen bonding interaction between the ethereal oxygen of PEO and carboxylic acid group of MUA attached to GNPs surface, which was confirmed through FTIR spectroscopy. The interaction between PEO and MUA-GNPs was further confirmed by thermal analysis using differential scanning calorimetry.     

Colorimetric assay for mercury (II) based on mercury-specific deoxyribonucleic acid-functionalized gold nanoparticles

A colorimetric nanoprobe-mercury-specific DNA-functionalized gold nanoparticles (Au-MSD) was developed for sensing Hg(2+). The new mercury-sensing concept relies on measuring changes in the inhibition of "non-crosslinking" aggregation of Au-MSD-induced by the folding of mercury-specific DNA strand through the thymine-Hg(2+)-thymine (T-Hg(2+)-T) coordination. In the absence of Hg(2+), a high concentration of MgCl(2) (50 mM) results in a rapid aggregation of Au-MSD because of the removal of charge repulsion. When Hg(2+) is present, the particles remain stable due to the folding of MSD functionalized on the particle surface. The assay enables the colorimetric detection of Hg(2+) in the concentration range of 0.1-10 μM Hg(2+) ions with a detection limit of 60 nM, and allows for the selective discrimination of Hg(2+) ions from the other competitive metal ions. Toward the goal for practical applications, the sensor was further evaluated by monitoring Hg(2+) in fish tissue samples.     

Colorimetric detection of sulfide based on target-induced shielding against the peroxidase-like activity of gold nanoparticles

Colorimetric recognition and sensing of sulfide with high sensitivity was proposed based on target-induced shielding against the peroxidase-like activity of bare gold nanoparticles. Significant features of the new assay system are its simplicity and cost-effectiveness. The recognition of sulfide by bare gold nanoparticles can be fulfilled in a few seconds and the assay can be accomplished in about 10 min. Furthermore, the new assay system does not require surface modification of GNPs to obtain the specificity for sulfide, and a salt-induced aggregation step is not needed. The detection limit of this method for sulfide was 80 nM. These features make this sensor a potentially powerful tool for the quantitative determination of sulfide in water samples.     

Colorimetric detection of thiol-containing amino acids using gold nanoparticles

This paper reports findings of an investigation of the unusual colorimetric change of gold nanoparticles in the presence of thiol-containing amino acids such as homocysteine, cysteine and glutathione. The colorimetric change for homocysteine exhibits a rate that is about two orders of magnitude higher than that for cysteine, and at least five orders of magnitude higher than that for glutathione. The reactivity is effectively reduced or suppressed by the coexistence of either cysteine or glutathione. It is believed that the reactivity involves encapsulation of the particles by the thiol-containing amino acids which is followed by crosslinking at the encapsulating shells. In comparison with cysteine and glutathione, homocysteine has a slower encapsulating rate but a faster crosslinking rate. Implications of the findings of the interfacial encapsulation and crosslinking reactivities of gold nanoparticles to potential nanoparticle-enhanced analytical detection of thiol-containing amino acids are also briefly discussed.     

Colorimetric detection of potassium ions using aptamer-functionalized gold nanoparticles

Herein, a simple and novel colorimetric method for detection of potassium ions (K⁺) was developed. The colorimetric experiments revealed that upon the addition of K⁺, the conformation of anti-K⁺ aptamer in solution changed from random coil structure to compact rigid G-quadruplex one. This compact rigid G-quadruplex structure could not protect AuNPs against K⁺-induced aggregation, and thus the visible color change from wine-red to blue-purple could be observed by the naked eye. The linear range of the colorimetric aptasensor covered a large variation of K⁺ concentration from 5 nM to 1 μM and the detection limit of 5 nM was obtained. Moreover, this assay was able to detect K⁺ with high selectivity and had great potential applications.     

Synthesis of 28-membered macrocyclic polyammonium cations functionalized gold nanoparticles and their potential for sensing nucleotides

A new synthesis of underivatized gold nanoparticles (Au-NPs) in water stabilized by the highly water soluble 28-membered macrocyclic polyammonium chloride, [28]ane-(NH(2)(+))(6)O(2)6Cl(-) (28-MCPAC) is reported. In addition to providing stability, 28-MCPAC with its cationic form functionalizes the Au-NPs for sensing anions in water. The 28-MCPAC-Au-NPs show a surface plasmon band in the visible region (>520 nm). By tuning the 28-MCPAC:HAuCl(4) ratio, Au-NPs with different core diameters ranging from 4 nm to 6 nm, as determined by TEM analysis, can be obtained. Particles are spherical, discrete, and appeared to have narrow size distributions. Raman spectroscopy confirms that the physisorption is responsible for the interaction between Au-NP surface and 28-MCPAC. The potential of the as-synthesized particles for sensing monophosphorylated nucleosides (nucleotides): 5-adenosine monophosphate (5-AMP), 5-cytosine monophosphate (5-CMP), 5-guanine monophosphate (5-GMP), and 5-uridine monophosphate (5-UMP) is investigated spectroscopically. Nucleotides-assisted agglomerations of 28-MCPAC-Au-NPs follow the order: 5-UMP>5-GMP>5-CMP>5-AMP. An attempt is taken to prepare Au-NPs in water at pH 4.55 without an added stabilizer. Particles without an added stabilizer are short lived, and the TEM image shows that the particles aggregate following a quasi-two-dimensional self-assembly array.