Thermogelling of double hydrophilic multiblock and triblock copolymers of N,N-dimethylacrylamide and N-isopropylacrylamide: chain architectural and Hofmeister effects

A series of thermoresponsive double hydrophilic (AB)(n) multiblock and ABA triblock copolymers of N,N-dimethylacrylamide (DMA) and N-isopropylacrylamide (NIPAM) with varying sequence lengths were synthesized via successive reversible addition-fragmentation chain transfer (RAFT) polymerizations by employing polytrithiocarbonate as the chain transfer agent. Previously, we reported that multiblock copolymers in dilute aqueous solutions can form either unimolecular or multimolecular micelles at elevated temperatures depending on the relative chain lengths of PDMA and PNIPAM sequences (Zhou et al. Langmuir 2007, 23, 13076-13084). In this follow-up work, we further explored and compared the chain architectural (multiblock vs triblock) and Hofmeister effects (addition of various sodium salts) on the gelation behavior of multiblock and ABA triblock copolymers at high concentrations and attempted to establish a correlation between the aggregation behavior and gelation properties of multiblock copolymers at low and high polymer concentrations, respectively. It was found that only m-PDMA(p)-PNIPAM(q) multiblock copolymers with PDMA and PNIPAM sequence lengths located within a specific range can form physical gels at elevated temperatures. Rheology measurements revealed that multiblock copolymers possess considerably lower critical gelation temperatures (CGT) and higher gel storage modulus, G'(gel), as compared to those of PNIPAM-b-PDMA-b-PNIPAM triblock copolymers possessing comparable sequence lengths. The addition of inorganic sodium salts can effectively facilitate thermogelling for multiblock and triblock copolymers, resulting in decreasing CGTs and critical gelation concentrations (CGCs) in the order of Hofmeister series with increasing hydration capabilities. The unique thermogelling behavior of aqueous multiblock copolymer solutions in the absence and presence of inorganic salts, as compared to that of ABA triblock copolymers, augurs well for their potential applications in various fields such as biomaterials and biomedicines.     

Two-stage collapse of unimolecular micelles with double thermoresponsive coronas

Phase transition behavior of unimolecular dendritic three-layer nanostructures with dual thermoresponsive coronas is studied. Successive reversible addition-fragmentation transfer (RAFT) polymerizations of N-isopropylacrylamide (NIPAM) and 2-(dimethylamino)ethyl methacrylate (DMA) were conducted using fractionated fourth-generation hyperbranched polyester (Bolton H40) based macroRAFT agent. At lower temperatures (<20 degrees C), dendritic macromolecules H40-poly(N-isopropylacrylamide)-poly(2-(dimethylamino)ethyl methacrylate) (H40-PNIPAM-PDMA) exist as unimolcular core-shell-corona nanostructures with hydrophobic H40 as the core, swollen PNIPAM as the inner shell, and swollen PDMA as the corona. PNIPAM and PDMA homopolymers undergo phase transitions at their lower critical solution temperatures (LCST), which are found to be 32 degrees C for PNIPAM and 40-50 degrees C for PDMA, respectively. Upon continuously heating through the LCSTs of PNIPAM and PDMA, such dendritic unimolecular micelles exhibit two-stage thermally induced collapse. This process is reversible with a two-stage reswelling upon cooling. Laser light scattering, micro-differential scanning calorimetry, and excimer fluorescence measurements are used to investigate the double phase transitions.     

Phase transition behavior of unimolecular micelles with thermoresponsive poly(N-isopropylacrylamide) coronas

This paper describes the double phase transition behavior of a thermoresponsive poly(N-isopropylacrylamide) (PNIPAM) brush at the surface of a hydrophobic core. Reversible addition-fragmentation transfer (RAFT) polymerization of N-isopropylacrylamide (NIPAM) was conducted by using a hyperbranched polyester (Boltorn H40) based macroRAFT agent. The resultant multiarm star block copolymer (H40-PNIPAM) exists as unimolecular micelles with hydrophobic H40 as the core, densely grafted PNIPAM brush as the shell. A combination of laser light scattering (LLS) and microdifferential scanning calorimetry (micro-DSC) studies of H40-PNIPAM in aqueous solution reveals double phase transitions of the PNIPAM corona, which is in contrast to the fact that free PNIPAM homopolymer in aqueous solution exhibits a lower critical solution temperature (LCST) at approximately 32 degrees C. The first phase transition takes place in the broad temperature range 20-30 degrees C, which can be tentatively ascribed to the n-cluster-induced collapse of the inner region of the PNIPAM brush close to the H40 core; the second phase transition occurs above 30 degrees C, which can be ascribed to the outer region of PNIPAM brush. Employing the RAFT chain extension technique, the inner and outer part of PNIPAM brush were then selectively labeled with pyrene derivatives, respectively; temperature-dependent excimer fluorescence measurements further support the conclusion that the inner part of PNIPAM brush collapses first at lower temperatures, followed by the collapse of the outer part at higher temperatures.     

Click cyclization of linear triblock copolymers at block junctions under high concentration due to end-block shielding

Linear triblock copolymers of poly(N-isopropylacrylamide) (PNIPAM) and poly(ethylene glycol) (PEG) with two azide groups at both block junctions (PNIPAM-N3-PEG-N3-PNIPAM) are click reacted with dipropargyl oxalylate under high polymer concentration (250 g/L). Benefiting from rapid feature of alkyne-azide click reaction and spatial shielding of PNIPAM end blocks, PEG center block of PNIPAM-N3-PEG-N3-PNIPAM remains separated although PNIPAM end blocks keep in contact under this high concentration. Therefore, PNIPAM-N3-PEG-N3-PNIPAM undergoes self-cyclization at block junctions to form tadpole-shaped architecture while N3-PEG-N3 without PNIPAM end blocks inter-connects linearly. The influence of block lengths of PEG and PNIPAM on the unusual cyclization under high polymer concentration is studied.     

Synthesis of poly(N-isopropylacrylamide)-b-poly(2-vinylpyridine) block copolymers via RAFT polymerization and micellization behavior in aqueous solution

Poly(N-isopropylacrylamide)-b-poly(2-vinylpyridine) (PNIPAM-b-P2VP) block copolymers were synthesized for the first time via reversible addition-fragmentation chain transfer (RAFT) polymerization in the presence of S-1-dodecyl-S(')-(a,a(')-dimethyl-a(')-acetic acid)trithiocarbonate as chain transfer agent (CTA) and 2,2(')-azobis(isobutyronitrile) as initiator. Both pH- and thermo-induced micellization behavior of the PNIPAM(59)-b-P2VP(102) block copolymer in dilute aqueous solution was investigated by pyrene fluorescence, dynamic and static light scattering, transmission electron microscopy and (1)H NMR. The results show that the critical aggregation pH value of the block copolymer is around 5 and the critical aggregation temperature of the block copolymer is around 42 degrees C. A reversible transition between P2VP-core and PNIPAM-core micelles can be observed through an intermediate unimer state in aqueous solution.     

Investigation of the cononsolvency effect on micellization behavior of polystyrene-b-poly(N-isopropylacrylamide)

The unusual aggregation behavior of poly(N-isopropylacrylamide)-based amphiphilic block copolymers was investigated by a combination of dynamic and static laser light scattering, AFM, and 1H NMR. The results revealed that PS-b-PNIPAM always forms large micelle aggregates in the transition process from an organic solvent to water due to the cononsolvency effect of PNIPAM. The cononsolvency effect of PNIPAM can be avoided to obtain classical micelles with PS29-b-PNIPAM27 in acetone-water at low temperatures (below 20 degrees C).     

Dually responsive multiblock copolymers via RAFT polymerization: Synthesis of temperature- and redox-responsive copolymers of PNIPAM and PDMAEMA

We report synthesis of temperature- and redox-responsive multiblock copolymers by reversible addition-fragmentation chain transfer (RAFT) polymerization. Well-defined α,ω-bis(dithioester)-functionalized poly(N-isopropylacrylamide) (PNIPAM) and poly(2-(dimethylamino) ethyl methacrylate) (PDMAEMA) were prepared using 1,4-bis(thiobenzoylthiomethyl)benzene and 1,4-bis(2-(thiobenzoylthio)prop-2-yl)benzene as RAFT agents, respectively. Dually responsive multiblock copolymers were synthesized in a single aminolysis/oxidation step from the α,ω-bis(dithioester)-terminated PNIPAM and PDMAEMA. The copolymers and their stimulus-responsive behavior were characterized by size exclusion chromatography, NMR, light scattering and atomic force microscopy. Due to the presence of redox-sensitive disulfide bonds between the blocks, the copolymers were readily reduced to the starting polymer blocks. The presence of temperature-responsive PNIPAM blocks provided the copolymers with the ability to assemble into core-shell nanostructures with hydrophobic PNIPAM as a core and cationic PDMAEMA as stabilizing shell when above the phase transition temperatures of PNIPAM. The temperature-induced assembly of the copolymers also showed substantial pH sensitivity. The phase transition temperature increased with decreasing pH, while molecular weight of the assemblies decreased.     

Synthesis and "schizophrenic" micellization of double hydrophilic AB4 miktoarm star and AB diblock copolymers: structure and kinetics of micellization

Poly(N-isopropylacrylamide) (PNIPAM)-based tetrafunctional atom transfer radical polymerization (ATRP) macroinitiator (1b) was synthesized via addition reaction of mono-amino-terminated PNIPAM (1a) with glycidol, followed by esterification with excess 2-bromoisobutyryl bromide. Well-defined double hydrophilic miktoarm AB4 star copolymer, PNIPAM-b-(PDEA)4, was then synthesized by polymerizing 2-(diethylamino)ethyl methacrylate (DEA) via ATRP in 2-propanol at 45 degrees C using 1b, where PDEA was poly(2-(diethylamino)ethyl methacrylate). For comparison, PNIPAM-b-PDEA linear diblock copolymer with comparable molecular weight and composition to that of PNIPAM-b-(PDEA)4 was prepared via reversible addition-fragmentation chain transfer (RAFT) polymerization. The pH- and thermoresponsive "schizophrenic" micellization behavior of the obtained PNIPAM65-b-(PDEA63)4 miktoarm star and PNIPAM70-b-PDEA260 linear diblock copolymers were investigated by 1H NMR and laser light scattering (LLS). In acidic solution and elevated temperatures, PNIPAM-core micelles were formed; whereas at slightly alkaline conditions and room temperature, structurally inverted PDEA-core micelles were formed. The size of the PDEA-core micelles of PNIPAM65-b-(PDEA63)4 is much smaller than that of PNIPAM70-b-PDEA260. Furthermore, the pH-induced micellization kinetics of the AB4 miktoarm star and AB block copolymers were investigated by the stopped-flow light scattering technique upon a pH jump from 4 to 10. Typical kinetic traces for the micellization of both types of copolymers can be well fitted with double-exponential functions, yielding a fast (tau1) and a slow (tau2) relaxation processes. tau1 for both copolymers decreased with increasing polymer concentration. tau2 was independent of polymer concentration for PNIPAM65-b-(PDEA63)4, whereas it decreased with increasing polymer concentration for PNIPAM70-b-PDEA260. The chain architectural effects on the micellization properties and the underlying mechanisms were discussed in detail.     

Fabrication of polymeric micelles with core–shell–corona structure for applications in controlled drug release

Thermo-responsive polymeric micelles of poly (ethylene glycol)-b-poly(2-hydroxyethyl methacrylate-g-lactide)-b-poly(N-isopropylacrylamide) (PEG-P(HEMA-PLA)-PNIPAM) with core–shell–corona structure were fabricated for applications in controlled drug release. The graft copolymer of PEG-P(HEMA-PLA)-PNIPAM was self-assembled into core–shell micelles with a densely PLA core and mixed PEG/PNIPAM shells at 25 °C in aqueous media. By increasing the temperature above the lower critical solution temperature of PNIPAM, these core–shell micelles could be converted into core–shell–corona micelles because of the collapse of PNIPAM block on the PLA core as the inner shell and the soluble PEG block stretching outside as the outer corona. Anticancer drug doxorubicin (DOX) was loaded in the polymeric micelles as a model drug. Compared with polymeric micelles formed by liner PEG-b-PLA-b-PNIPAM triblock copolymer, these polymeric micelles exhibited higher loading capacity, and release of DOX from the polymeric micelles with core–shell–corona structure was well-controlled.     

Morphological transitions in aggregates of thermosensitive poly(ethylene oxide)‐b‐poly(N‐isopropylacrylamide) block copolymers prepared via RAFT polymerization

Double hydrophilic poly(ethylene oxide)‐b‐poly(N‐isopropylacrylamide) (PEO‐b‐PNIPAM) block copolymers were synthesized via reversible addition‐fragmentation chain transfer (RAFT) polymerization, using a PEO‐based chain transfer agent (PEO‐CTA). The molecular structures of the copolymers were designed to be asymmetric with a short PEO block and long PNIPAM blocks. Temperature‐induced aggregation behavior of the block copolymers in dilute aqueous solutions was systematically investigated by a combination of static and dynamic light scattering. The effects of copolymer composition, concentration (C_p), and heating rate on the size, aggregation number, and morphology of the aggregates formed at temperatures above the LCST were studied. In slow heating processes, the aggregates formed by the copolymer having the longest PNIPAM block, were found to have the same morphology (spherical “crew‐cut” micelles) within the full range of C_p. Nevertheless, for the copolymer having the shortest PNIPAM block, the morphology of the aggregates showed a great dependence on C_p. Elongation of the aggregates from spherical to ellipsoidal or even cylindrical was observed. Moreover, vesicles were observed at the highest C_p investigated. Fast heating leads to different characteristics of the aggregates, including lower sizes and aggregation numbers, higher densities, and different morphologies. Thermodynamic and kinetic mechanisms were proposed to interpret these observations, including the competition between PNIPAM intrachain collapse and interchain aggregation. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 4099–4110, 2009     

Attractive bridging interactions in dense polymer brushes in good solvent measured by atomic force microscopy

Using an atomic force microscope (AFM), we have investigated the interaction forces exerted by latex particles bearing densely grafted polymer brushes consisting of poly(N,N-dimethylacrylamide) (PDMA), poly(methoxyethylacrylamide) (PMEA), poly(N-isopropylacrylamide) (PNIPAM), and PMEA-b-PNIPAM in aqueous media (good solvent). The brushes were prepared by controlled surface-initiated atom transfer radical polymerization, and the hydrodynamic thicknesses were measured by dynamic light scattering. The molecular weight (Mn), grafting density (sigma), and polydispersity (PDI) of the brushes were determined by gel permeation chromatography and multiangle laser light scattering after cleaving the polymer from the latex surface by hydrolysis. Force profiles of PDMA (0.017 nm(-2) < or = sigma < or = 0.17 nm-2) and PMEA (sigma = 0.054 nm-2) brushes were purely repulsive upon compression, with forces increasing with Mn and a, as expected, due to excluded volume interactions. At a sufficiently low grafting density (sigma = 0.012 nm-2), PDMA exhibited a long-range exponentially increasing attractive force followed by repulsion upon further compression. The long-range attractive force is believed to be due to bridging between the free chain ends and the AFM tip. The PNIPAM brush exhibited a bridging force at a grafting density of 0.037 nm(-2), a value lower than the sigma needed to induce bridging in the PDMA brush. Bridging was therefore found to depend on grafting density as well as on the nature of the monomer. The grafting densities of these polymers were larger than those typically associated with bridging. Bridging interactions were used to confirm the presence of PNIPAM in a block copolymer PMEA-b-PNIPAMA brush given that the original PMEA homopolymer brush produced a purely repulsive force. The attractive force was first detected in the block copolymer brush at a separation that increased with the length of the PNIPAM block.     

Salt and Heat Induced Aggregation of Diblock Copolymers of Sodium 2-(acrylamido)-2-methylpropanesulfonate and N-Isopropylacrylamide in Aqueous Solutions

Heat and salt induced aggregation of three well-defined double hydrophilic block copolymers (DHBCs) of sodium 2-(acrylamido)-2-methylpropanesulfonate (AMPS) and N-isopropylacrylamide (NIPAM) with constant chain length of the PAMPS block (with number-average degree of polymerization, DP _n  = 61) and varying chain length of the PNIPAM block with DP _n  = 11, 23, and 34 synthesized via reversible addition-fragmentation chain transfer (RAFT) controlled radical polymerization was investigated by turbidity, dynamic light scattering (DLS) and ¹H NMR measurements. In the presence of salt or with an increase in temperature, the diblock copolymers form micelles with a PNIPAM core and PAMPS corona. The heat and salt induced aggregation in dilute aqueous solutions dependant on the molecular characteristics of the DHBC (DP _n of the PNIPAM block) was observed. The DHBC becomes amphiphilic as the PNIPAM block loses hydrophilicity at higher temperature above its lower critical solution temperature (LCST). Furthermore, the presence of salt induces salting out effect of the uncharged PNIPAM block. The diblock copolymer thus forms nanosized aggregates at a high temperature or in the presence of salt. These aggregates may be multiple aggregates due to inter-micellar aggregation of the spherical core-corona micelles.     

Adsorption of polymeric micelles and vesicles on a surface investigated by quartz crystal microbalance

Polystyrene-b-poly(N-isopropylacrylamide) (PS-b-PNIPAM) diblock copolymers either with or without thiol end groups, depending on the relative length of the two blocks, form micelles or vesicles in water. The adsorption of such micelles or vesicles on a gold surface from aqueous solution was investigated in situ at 20 degrees C by use of a quartz crystal microbalance with dissipation monitoring (QCM-D). The changes in frequency (Deltaf) and dissipation (DeltaD) revealed that the micelles and vesicles without thiol groups were intact with some deformation when they were deposited on the surface. On the other hand, the micelles and vesicles with thiol groups at the end of PNIPAM blocks would transform into trilayers due to the strong interaction between thiols and gold surface.     

Synthesis of amphiphilic multiblock and triblock copolymers of polydimethylsiloxane and poly(N,N‐dimethylacrylamide)

The synthesis and spectroscopic characterization of a new family of amphiphilic multiblock and triblock copolymers is described. The synthetic methodology rests on the preparation of telechelic multifunctional and difunctional chain transfer agents easily available in two synthetic steps from commercially available polydimethylsiloxane‐containing starting materials. Telechelic polymers thus synthesized are used as macromolecular chain transfer agents in the reversible addition fragmentation chain transfer (RAFT) polymerization of N,N‐dimethylacrylamide (DMA) enabling the synthesis of (AB)_n‐type multiblock and ABA‐type triblock copolymers of varying compositions possessing monomodal molecular weight distribution. (AB)_n multiblock copolymers [(PDMA‐b‐PDMS)_n] were prepared with between 52 and 95 wt % poly(dimethylacrylamide) with number average molecular weights (M_n) between 14,000 and 86,000 (polydispersities of 1.20–2.30). On the other hand, ABA block copolymers with DMA led to amphiphilic block copolymers (PDMA‐b‐PDMS‐b‐PDMA) with M_n values between 9000 and 44,000 (polydispersities of 1.24–1.62). © Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 7033–7048, 2008     

Electrostatic self-assembly of neutral and polyelectrolyte block copolymers and oppositely charged surfactant

We investigated the phase behavior and the microscopic structure of the colloidal complexes constituted from neutral/polyelectrolyte diblock copolymers and oppositely charged surfactant by dynamic light scattering (DLS) and small-angle neutron scattering (SANS). The neutral block is poly(N-isopropylacrylamide) (PNIPAM), and the polyelectrolyte block is negatively charged poly(acrylic acid) (PAA). In aqueous solution with neutral pH, PAA behaves as a weak polyelectrolyte, whereas PNIPAM is neutral and in good-solvent condition at ambient temperature, but in poor-solvent condition above approximately 32 degrees C. This block copolymer, PNIPAM-b-PAA with a narrow polydispersity, is studied in aqueous solution with an anionic surfactant, dodecyltrimethylammonium bromide (DTAB). For a low surfactant-to-polymer charge ratio Z lower than the critical value ZC, the colloidal complexes are single DTAB micelles dressed by a few PNIPAM-b-PAA. Above ZC, the colloidal complexes form a core-shell microstructure. The core of the complex consists of densely packed DTA+ micelles, most likely connected between them by PAA blocks. The intermicellar distance of the DTA+ micelles is approximately 39 A, which is independent of the charge ratio Z as well as the temperature. The corona of the complex is constituted from the thermosensitive PNIPAM. At lower temperature the macroscopic phase separation is hindered by the swollen PNIPAM chains. Above the critical temperature TC, the PNIPAM corona collapses leading to hydrophobic aggregates of the colloidal complexes.     

PNIPAM-b-聚碳酸酯温敏胶束的制备及用作药物控制释放载体的研究

以多孔硅球固定化猪胰脂肪酶(IPPL)为催化剂,温敏性HO-PNIPAM为大分子引发剂,5-甲基-5-烯丙氧羰基-三亚甲基碳酸酯(MAC)和5,5-二甲基三亚甲基碳酸酯(DTC)为共聚单体,通过开环聚合合成了不同结构比例的两亲性嵌段型共聚物P(MAC-co-DTC) -b-PNIPAM.该嵌段型共聚物在水中可自组装形成...     

Poly(N-isopropylacrylamide) thermoresponsive cross-linked conjugates containing polymeric soybean oil and/or polypropylene glycol

Synthesis, characterization and solution properties of a new series of the PNIPAM-soybean oil and/or polypropylene glycol, PPG, conjugates (conjugates also referred to as co-networks) have been described. For this purpose free radical polymerization of NIPAM monomer was initiated by macroinitiators based on PSB and/or PPG in order to obtain PSB-g-PNIPAM, PPG-g-PNIPAM and PSB-g-PPG-g-PNIPAM cross-linked graft copolymers. The autooxidation of soybean oil under air at room temperature rendered waxy soluble polymeric soybean oil peroxide associated with cross-linked parts. The soluble polymeric oil macro-peroxide isolated from the cross-linked part was used to initiate the free radical polymerization of NIPAM to give PSB-g-PNIPAM cross-linked copolymer. To obtain PPG-macromonomeric initiator, PPG-MIM, PPG-bis amino propyl ether with Mn 400 (or 2000) Dalton was reacted with 4,4′-azo bis cyanopentanoyl chloride and methacryloyl chloride, respectively. PPG-MIM also initiated the free radical polymerization of NIPAM at 80 °C to yield PPG-g-PNIPAM cross-linked thermoresponsive product. In order to obtain PSB-g-PPG-g-PNIPAM cross-linked triblock copolymer, NIPAM was polymerized by using the mixture of two macroinitiators, PSB and PPG-MIM. PSB contents in the graft copolymers were calculated via elemental analysis of nitrogen in graft copolymers. Thermal analysis, SEM, FTIR and ¹H NMR techniques were used in the characterization of the products. The effect of polymeric soybean oil, PSB, and/or PPG on the thermal response rate of poly(N-isopropylacrylamide, PNIPAM, cross-linked-graft copolymers swollen in water has been investigated by means of swelling-deswelling and drug release behaviors against to temperature change. Lower critical solution temperatures (LCST) of the cross-linked PNIPAM conjugates (conjugates also referred to as co-networks) were determined from the curves of swelling degrees versus solution temperatures. The response temperature of the hydrophobically modified PNIPAM conjugates was reduced to 27 °C, 23 °C and 27 °C for PSB-g-PNIPAM, PPG-g-PNIPAM and PSB-g-PPG-g-PNIPAM, respectively. We have found that the graft copolymers were not pH-responsive. In addition, higher pH ranges cause the hydrolysis of the PSB ester linkages, quickly and makes the cross-linked graft copolymers soluble.The fastest shrinking of the gels was observed by loosing water between 65% and 98% at 50 °C.Methyl orange (MO), was used as a model drug, loaded into cross-linked graft copolymers to examine and compare the effects of controlled release at lower and higher temperatures of lower critical solution temperature (LCST).     

N-异丙基丙烯酰胺/丙烯酸胆甾醇酯共聚物研究

合成和表征了N 异丙基丙烯酰胺 (NIPAM)与丙烯酸胆甾醇酯 (CHA)的共聚物 .利用表面张力和荧光探针法研究了共聚物水溶液的表面活性性能 ,确定了其临界胶束浓度 (CMC) .利用浊度法和荧光探针法测定了共聚物的最低临界溶液温度 (LCST) .研究发现 ,在聚N 异丙基丙烯酰胺 (PNIPAM)分子链中引入疏水结构单元CHA会使其LCST下降 ;且随着共聚物中CHA含量的增加 ,LCST下降幅度增加 .在PNIPAM链段中引入少量的CHA就会使其表现出明显的两亲性 ,共聚物在水中能形成有壳核结构的稳定胶束 .通过将疏水化合物胆甾醇作为模拟药物包埋在胶束的疏水核中的研究 ,证实所得的胶束能包埋疏水药物 ,且随着包埋胆甾醇含量的增加 ,胶束平均粒径增大 .     

Interactions in water of alkyl and perfluoroalkyl surfactants with fluorocarbon- and hydrocarbon-modified poly(N-isopropylacrylamides)

Fluorescence spectroscopy and isothermal titration calorimetry (ITC) have been used to study the interactions in water at 25 degrees C of two anionic surfactants--sodium dodecyl sulfate (SDS) and sodium perfluorononanoate (SPFN)--with various pyrene-labeled hydrophobically modified poly(N-isopropylacrylamides) (HM-PNIPAM) grafted at random with small amounts of fluorocarbon chains (1H,1H-perfluorooctyl, CH2C7F15); (PNIPAM-F), or (n-octadecyl, C18H37) (PNIPAM-HPy) or both (PNIPAM-F/HPy). In aqueous solution, the copolymers form micellar structures consisting of a loose corona of hydrated poly(N-isopropylacrylamide) chains and a hydrophobic core rich in hydrocarbon or fluorocarbon groups. From fluorescence studies based on changes in the ratio of pyrene excimer to monomer emission intensity, it has been established (1) that mixed SDS/C18H37 clusters form along the polymer chain upon addition of SDS to either PNIPAM-HPy or PNIPAM-F/HPy and (2) that SPFN does not interact with the hydrocarbon-rich microdomains of the polymeric micelles. The conclusions were corroborated by ITC experiments, which yield the overall enthalpy change associated with polymer/surfactant interactions. They provided strong evidence (1) that SDS molecules adsorb along the PNIPAM main chain but do not mix with the fluorocarbon-rich microdomains of PNIPAM-F or PNIPAM-F/HPy and (2) that SPFN associates with the perfluorocarbon substituents of PNIPAM-F and PNIPAM-F/HPy but has a poor affinity for the polymer chain.     

Synthesis and characterization of biocompatible, thermoresponsive ABC and ABA triblock copolymer gelators

The synthesis of doubly thermoresponsive PPO-PMPC-PNIPAM triblock copolymer gelators by atom transfer radical polymerization using a PPO-based macroinitiator is described. Provided that the PPO block is sufficiently long, dynamic light scattering and differential scanning calorimetry studies confirm the presence of two separate thermal transitions corresponding to micellization and gelation, as expected. However, these ABC-type triblock copolymers proved to be rather inefficient gelators: free-standing gels at 37 degrees C required a triblock copolymer concentration of around 20 wt%. This gelator performance should be compared with copolymer concentrations of 6-7 wt% required for the PNIPAM-PMPC-PNIPAM triblock copolymers reported previously. Clearly, the separation of micellar self-assembly from gel network formation does not lead to enhanced gelator efficiencies, at least for this particular system. Nevertheless, there are some features of interest in the present study. In particular, close inspection of the viscosity vs temperature plot obtained for a PPO43-PMPC160-PNIPAM81 triblock copolymer revealed a local minimum in viscosity. This is consistent with intramicelle collapse of the outer PNIPAM blocks prior to the development of the intermicelle hydrophobic interactions that are a prerequisite for macroscopic gelation.