End‐Functionalized Palladium SCS Pincer Polymers via Controlled Radical Polymerizations

A direct and facile route toward semitelechelic polymers, end‐functionalized with palladated sulfur–carbon–sulfur pincer (Pd^II‐pincer) complexes is reported that avoids any post‐polymerization step. Key to our methodology is the combination of reversible addition‐fragmentation chain‐transfer (RAFT) polymerization with functionalized chain‐transfer agents. This strategy yields Pd end‐group‐functionalized materials with monomodal molar mass dispersities (Đ ) of 1.18–1.44. The RAFT polymerization is investigated using a Pd^II‐pincer chain‐transfer agent for three classes of monomers: styrene, tert‐butyl acrylate, and N‐isopropylacrylamide. The ensuing Pd^II‐pincer end‐functionalized polymers are analyzed using ¹H NMR spectroscopy, gel‐permeation chromatography, and elemental analysis. The RAFT polymerization methodology provides a direct pathway for the fabrication of Pd^II‐pincer functionalized polymers with complete end‐group functionalization.

     

Amine‐Reactive Polymers Synthesized by RAFT Polymerization Using an Azlactone Functional Trithiocarbonate RAFT Agent

A new azlactone‐derived trithiocarbonate is prepared and used as a chain‐transfer agent to mediate the reversible addition‐fragmentation chain transfer (RAFT) polymerization of styrene, ethyl acrylate, and N‐isopropyl acrylamide. Well‐defined polymers with controlled molecular weights (M _n = 1000–7000 g mol⁻¹) and narrow molecular weight distributions (PDI = 1.05–1.10) are thus obtained that retain the azlactone functionality at the chain end. The ability of the resulting end‐functionalized polymers to react quantitatively at room temperature with a stoichiometric amount of amino groups with retention of the thiocarbonylthio moiety is ascertained by using 4‐fluorobenzylamine and allylamine.     

Synthesis of Structurally Well‐Defined Telechelic Polymers by Organostibine‐Mediated Living Radical Polymerization: In Situ Generation of Functionalized Chain‐Transfer Agents and Selective ω‐End‐Group Transformations

Several organostibine chain‐transfer agents possessing polar functional groups have been prepared by the reactions of azo initiators and tetramethyldistibine ( 1 ). Carbon‐centered radicals thermally generated from the azo initiators were trapped by 1 to yield the corresponding organostibine chain‐transfer agents. The high yields observed in the synthesis of the chain‐transfer agents strongly suggest that distibines have excellent radicophilic reactivity. As the reactions proceeded under neutral conditions, functional groups that are incompatible with ionic conditions were incorporated into the chain‐transfer agents. The chain‐transfer agents were used in living radical polymerization to synthesize the corresponding α‐functionalized polymers. As the functional groups in the chain‐transfer agents did not interfere with the polymerization reaction, well‐controlled polymers possessing number‐average molecular weights (M_ns) predetermined by the monomer/transfer agent ratios were synthesized with low polydispersity indices (PDIs). The organostibanyl ω‐polymer ends were transformed into a number of different functional groups by radical‐coupling, radical‐addition, and oxidation reactions. Therefore, it was possible to synthesize well‐controlled telechelic polymers with the same and also with different functional groups at their α‐ and ω‐polymer ends. Distibine 1 was also found to increase PDI control in the living radical polymerization of styrene and methyl methacrylate (MMA) using a purified organostibine chain‐transfer agent. Well‐controlled poly(methyl methacrylate)s with M_n values ranging from 10 000 to 120 000 with low PDIs (1.05–1.15) were synthesized by the addition of a catalytic amount of 1 . The results have been attributed to the high reactivity of distibine 1 towards polymer‐end radicals, which are spontaneously deactivated to yield organostibine dormant species.     

Efficient Homodifunctional Bimolecular Ring‐Closure Method for Cyclic Polymers by Combining RAFT and Self‐Accelerating Click Reaction

An efficient metal‐free homodifunctional bimolecular ring‐closure method is developed for the formation of cyclic polymers by combining reversible addition‐fragmentation chain transfer (RAFT) polymerization and self‐accelerating click reaction. In this approach, α,ω‐homodifunctional linear polymers with azide terminals are prepared by RAFT polymerization and postmodification of polymer chain end groups. By virtue of sym‐dibenzo‐1,5‐cyclooctadiene‐3,7‐diyne (DBA) as small linkers, well‐defined cyclic polymers are then prepared using the self‐accelerating double strain‐promoted azide–alkyne click (DSPAAC) reaction to ring‐close the azide end‐functionalized homodifunctional linear polymer precursors. Due to the self‐accelerating property of DSPAAC ring‐closing reaction, this novel method eliminates the requirement of equimolar amounts of telechelic polymers and small linkers in traditional bimolecular ring‐closure methods. It facilitates this method to efficiently and conveniently produce varied pure cyclic polymers by employing an excess molar amount of DBA small linkers.

     

Symmetrical polymer systems prepared using a degradable bifunctional atom transfer radical polymerization initiator: Synthesis,characterization, and cleavage

Linear (co)polymers and dimethacrylate‐end‐linked polymer networks of methyl methacrylate with 2‐(dimethylamino)ethyl methacrylate, cleavable in the middle of the polymer chain, either under thermolysis or alkaline hydrolysis conditions, were prepared via atom transfer radical polymerization (ATRP) using a specially designed bifunctional degradable initiator. This initiator was 2,6‐pyridinediethanol di(2‐bromo‐2‐methyl propanoate) (PyDEDBrMeP), bearing two 2‐(pyridin‐2‐yl)ethyl ester moieties, known for their thermal and hydrolytic (alkaline conditions) lability. As a control, a more stable bifunctional ATRP initiator, 2,6‐pyridinedimethanol di(2‐bromo‐2‐methyl propanoate) (PyDMDBrMeP), was also synthesized together with the corresponding linear polymers and polymer networks prepared from it. Thermal or hydrolytic treatment of the polymers prepared using PyDEDBrMeP led to a reduction in the molecular weights of the linear polymers by a factor of two, and to the conversion of the polymer networks to soluble branched (star) structures, consistent with the expected cleavage of the initiator residue located in the middle of the polymer chain. Thermal treatment of the polymers prepared using PyDMDBrMeP did not affect their molecular weight due to the thermal stability of the (pyridin‐2‐yl)methyl ester group, while treatment under alkaline hydrolysis conditions resulted in complete cleavage, similar to the PyDEDBrMeP‐prepared polymers. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 2342–2355     

Synthesis and postfunctionalization of well‐defined star polymers via “double” click chemistry

In this article, the synthesis and the functionalization of well‐defined, narrow polydispersity (polydispersity index < 1.2) star polymers via reversible addition‐fragmentation chain transfer polymerization is detailed. In this arm first approach, the initial synthesis of a poly(pentafluorophenyl acrylate) polymer, and subsequent, cross‐linking using bis‐acrylamide to prepare star polymers, has been achieved by reversible addition fragmentation chain transfer polymerization. These star polymers were functionalized using a variety of amino functional groups via nucleophilic substitution of pentafluorophenyl activated ester to yield star polymers with predesigned chemical functionality. This approach has allowed the synthesis of star glycopolymer using a very simple approach. Finally, the core of the stars was modified via thiol‐ene click chemistry reaction using fluorescein‐o‐acrylate and DyLigh 633 Maleimide. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Radical polymerization of diallylamine compounds: From quantum chemical modeling to controllable synthesis of high‐molecular‐weight polymers

We investigated the possibility to obtain high‐molecular‐weight (HMW) polymers from the monomers of the diallylamine (DAA) series using quantum chemical and experimental methods. Such monomers are known to polymerize into oligomeric products due to the reaction of the degradative chain transfer to the monomer. We studied potential energy profiles of the chain propagation and competing chain transfer reactions, viz., the free radical double bond addition and α‐hydrogen radical abstraction, respectively, for a number of polymerization processes. Calculations were carried in the framework of the polarized continuum solvent model utilizing the procedure based on the semiempirical MNDO‐PM3 background. It was found that the necessary condition for decreasing competitiveness of the chain transfer to the monomer is the availability of monomer molecules in only protonated form in the polymerizing system. Using these results, we developed the strategy for obtaining HMW polymers based on said monomers. We synthesized a monomer system (the equimolar salt of N,N‐diallyl‐N‐methylamine and trifluoroacetic acid) that fully corresponds to such requirements. Novel HMW polymers were then synthesized by radical polymerization of this salt at soft conditions. We established that chain termination is controlled by the bimolecular mechanism. We showed that the degradative chain transfer transforms into the effective chain transfer. The mechanisms of the observed phenomena are discussed. © 2002 Wiley Periodicals, Inc. Int J Quantum Chem, 2002     

Synthesis of 3-miktoarm stars and 1st generation mikto dendritic copolymers by "living" radical polymerization and "click" chemistry

The facile synthesis of 3-miktoarm star polymers and 1st generation mikto polymeric dendrimers using atom transfer radical polymerization (ATRP) and "click" chemistry is demonstrated. ATRP was used to synthesize near uniform polymers with Br chain ends, which were easily converted into azido groups. These polymer chains were then attached to a trifunctional alkyne molecule (tripropargylamine) using click reactions in a variety of ways to make the miktoarm stars and miktoarm polymeric dendrimers.     

A versatile method for cyclic polymers from conjugated and unconjugated vinyl monomers

A versatile method was introduced to prepare cyclic polymers from both conjugated and unconjugated vinyl monomers. It was developed on the combination of the RAFT polymerization and the self‐accelerating double strain‐promoted azide‐alkyne click (DSPAAC) reaction. In this approach, a switchable chain transfer agent 1 was designed to have hydroxyl terminals and a functional pyridinyl group. The protonation and deprotonation of pyridinyl group endowed the chain transfer agent 1 with a switchable control capability to RAFT polymerization of both conjugated and unconjugated vinyl monomers. Based on this, RAFT polymerization and the following hydroxyl end group modification were used to prepare various azide‐terminated linear polymers including polystyrene, poly(N‐vinylcarbazole), and polystyrene‐block‐poly(N‐vinylcarbazole). Using sym‐dibenzo‐1,5‐cyclooctadiene‐3,7‐diyne (DBA) as small linkers, the corresponding cyclic polymers were then prepared via the DSPAAC reaction between DBA and azide terminals of the linear precursors. Due to the self‐accelerating property of DSPAAC reaction, this bimolecular ring‐closing reaction could efficiently produce the pure cyclic polymers using excess molar amounts of DBA to linear polymer precursors. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 1811–1820     

Reversible addition‐fragmentation chain transfer polymerization of methacrylates containing hole‐ or electron‐transporting groups

The controlled/living radical polymerization of 2‐(N‐carbazolyl)ethyl methacrylate (CzEMA) and 4‐(5‐(4‐tert‐butylphenyl‐1,3,4‐oxadiazol‐2‐yl)phenyl) methacrylate (t‐Bu‐OxaMA) via reversible addition‐fragmentation chain transfer polymerization has been studied. Functional polymers with hole‐ or electron‐transfer ability were synthesized with cumyl dithiobenzoate as a chain transfer agent (CTA) and AIBN as an initiator in a benzene solution. Good control of the polymerization was confirmed by the linear increase in the molecular weight (MW) with the conversion. The dependence of MW and polydispersity index (PDI) of the resulting polymers on the molar ratio of monomer to CTA, monomer concentration, and molar ratio of CTA to initiator has also been investigated. The MW and PDI of the resulting polymers were well controlled as being revealed by GPC measurements. The resulting polymers were further characterized by NMR, UV‐vis spectroscopy, and cyclic voltammetry. The polymers functionalized with carbazole group or 1,3,4‐oxadiazole group exhibited good thermal stability, with an onset decomposition temperature of about 305 and 323 °C, respectively, as determined by thermogravimetric analysis. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 242–252, 2007     

Synthesis and characterization of “Living” star‐shaped poly(N‐vinylcaprolactam) with four arms and carboxylic acid end groups

Poly(N‐vinylcaprolactam) (PNVCL) star‐shaped polymers with four arms and carboxyl end groups were synthesized by reversible addition–fragmentation chain transfer (RAFT) polymerization of N‐vinylcaprolactam (NVCL) employing a tetrafunctional trithiocarbonate as an R‐RAFT agent. The resulting star polymers were characterized using ¹H NMR, FT‐IR, gel permeation chromatography (GPC), and UV–vis. Molecular weight of star polymers were analyzed by GPC and UV–vis being observed that the values obtained were very similar. Furthermore, the thermosensitive behavior of the star polymers was studied in aqueous solution by measuring the lower critical solution temperature by dynamic light scattering. Star‐shaped PNVCL were chain extended with ethyl‐hexyl acrylate (EHA) to yield star PNVCL‐b‐PEHA copolymers with an EHA molar content between 4% and 6% proving the living character of the star‐shaped macroCTA. These star block copolymers form aggregates in aqueous solutions with a hydrodynamic diameter ranged from 170 to 225 nm. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 2156–2165     

Dendrimer‐star polymer and block copolymer prepared by reversible addition‐fragmentation chain transfer (RAFT) polymerization with dendritic chain transfer agent

A new reversible addition‐fragmentation chain transfer (RAFT) agent, dendritic polyester with 16 dithiobenzoate terminal groups, was prepared and used in the RAFT polymerization of styrene (St) to produce star polystyrene (PSt) with a dendrimer core. It was found that this polymerization was of living characters, the molecular weight of the dendrimer‐star polymers could be controlled and the polydispersities were narrow. The dendrimer‐star block copolymers of St and methyl acrylate (MA) were also prepared by the successive RAFT polymerization using the dendrimer‐star PSt as macro chain transfer agent. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 6379–6393, 2005     

Self‐Assembled Microspheres Driven by Dipole‐Dipole Interactions: UCST‐Type Transition in Water

A double hydrophilic block copolymer, poly(ethylene glycol)‐poly(3‐dimethyl (methacryloyloxyethyl) ammonium propane sulfonate) (PEG‐SB), is synthesized by reversible addition‐fragmentation transfer (RAFT) polymerization using PEG methyl ether (4‐cyano‐4‐pentanoate dodecyl trithiocarbonate) as a chain transfer agent. PEG‐SB forms multi‐layered microspheres with dipole‐dipole interactions of the SB side chains as the driving force. The PEG‐SB polymers show an upper critical solution temperature (UCST) and the UCST is controllable by the polymerization degree. The PEG‐SB microspheres are dissociated above the UCST and then monodispersed microspheres (∼1 μm) are obtained when the solution temperature is decreased below the UCST again. The disassociation/association of the microspheres is also controllable using the concentration of NaCl. These multi‐responsive microspheres could be a powerful tool in the field of nano‐biotechnology.

     

Initiator and Photocatalyst‐Free Visible Light Induced One‐Pot Reaction: Concurrent RAFT Polymerization and CuAAC Click Reaction

A new, visible light‐catalyzed, one‐pot and one‐step reaction is successfully employed to design well‐controlled side‐chain functionalized polymers, by the combination of ambient temperature revisible addtion‐fragmentation chain transfer (RAFT) polymerization and click chemistry. Polymerizations are well controlled in a living way under the irradiation of visible light‐emitting diode (LED) light without photocatalyst and initiator, using the trithiocarbonate agent as iniferter (initiator‐transfer agent‐terminator) agent at ambient temperature. Fourier transfer infrared spectroscopy (FT‐IR), NMR, and matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry (MALDI‐TOF‐MS) data confirm the successful one‐pot reaction. Compared to the reported zero‐valent metal‐catalyzed one‐pot reaction, the polymerization rate is much faster than that of the click reaction, and the visible light‐catalyzed one‐pot reaction can be freely and easily regulated by turning on and off the light.

     

Well-controlled reversible addition-fragmentation chain transfer radical polymerisation under ultraviolet radiation at ambient temperature

Controlled reversible addition-fragmentation chain transfer radical polymerisation of methyl acrylate was carried out under long-wave (lambda > or = 365 nm) ultraviolet radiation using an acylphosphine oxide as a photoinitiator at ambient temperature; the polymerisation shows a "living" character at high conversions of polymerisation and leads to well-defined polymers with narrow polydispersities (Mw/Mn < 1.1).     

One-pot RAFT/"click" chemistry via isocyanates: efficient synthesis of α-end-functionalized polymers

A new methodology has been developed for preparing α-functional polymers in a one-pot simultaneous polymerization/isocyanate "click" reaction. Our original synthetic strategy is based on the preparation of a carbonyl-azide chain transfer agent (CTA) precursor that undergoes the Curtius rearrangement in situ during reversible addition-fragmentation chain transfer (RAFT) polymerization yielding well-controlled α-isocyanate modified polymers. This strategy overcomes numerous difficulties associated with the synthesis of a polymerization mediator bearing an isocyanate at the R group and with the handling of such a reactive functionality. This new carbonyl-azide CTA can control the polymerization of a wide range of monomers, including (meth)acrylates, acrylamides, and styrenes (M(n) = 2-30 kDa; ? = 1.16-1.38). We also show that this carbonyl-azide CTA can be used as a universal platform for the synthesis of α-end-functionalized polymers in a one-pot RAFT polymerization/isocyanate "click" procedure.     

Synthesis and properties of polythiophene derivatives containing triphenylamine moiety and their photovoltaic applications

A series of novel soluble polythiophene derivatives containing triphenylamine moiety were synthesized by Grignard metathesis (GRIM) method. The structures of the polymers were characterized and their physical properties were investigated. High molecular weight (M_n up to 25,800 g/mol) and thermostable polymers were obtained. The absorption spectra demonstrated that the absorption wavelength of the polymers could be tuned dramatically by introducing thiophene units in the main chain of the polymers. Photoluminescence spectra indicated that there was intramolecular energy transfer from the side chain to the main chain, and the maximum emission was red‐shifted gradually with the increase of thiophene units in the main chain. Cyclic voltammetry displayed that the polymers possessed relatively high oxidation potential, which promised good air stability and high open circuit voltage for photovoltaic cells application. Finally, bulk heterojunction photovoltaic devices were fabricated by using the polymers as donors and (6,6)‐phenyl C₆₁‐butyric acid methyl ester (PCBM) as acceptor. The maximal open circuit voltage of the photovoltaic cells reached 0.71–0.87 V and the power conversion efficiencies of the devices were measured between 0.014% and 0.45% under white light at 100 mW/cm². © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 3970–3984, 2008     

Reversible Deactivation Radical Polymerization of Monomers Containing Activated Aziridine Groups

Polymers bearing activated aziridine groups are attractive precursors to α‐substituted‐β‐amino‐functionalized materials due to the enhanced reactivity of the pendant aziridine functionalities toward ring‐opening by nucleophiles. Two aziridine‐containing styrenic monomers, 2‐(4‐vinylphenyl)aziridine (VPA) and N‐mesyl‐2‐(4‐vinylphenyl)aziridine (NMVPA), were polymerized under a variety of reversible deactivation radical polymerization conditions. Low‐catalyst‐concentration atom transfer radical polymerization (LCC‐ATRP) and reversible addition‐fragmentation chain‐transfer (RAFT) polymerization were ineffective at producing well‐defined polymers from VPA due to side reactions between the aziridine functionalities and the agents controlling the polymerizations (catalysts or chain transfer agents). PolyVPA produced under nitroxide‐mediated polymerization (NMP) conditions had narrow molecular weight distribution at low to moderate conversions of monomer, but branched and eventually cross‐linked polymers were formed at higher conversions due to ring‐opening reactions of the aziridine groups. Most of these undesirable side reactions were eliminated by attaching a methanesulfonyl (mesyl) group to the aziridine nitrogen atom, and well‐defined linear homopolymers with targeted molecular weights were realized from NMVPA under RAFT and NMP conditions; however, side reactions between the aziridine groups and the catalyst in LCC‐ATRP still occured and the polymerization was uncontrolled using this technique.

     

Reversible addition–fragmentation chain transfer mediated radical polymerization of asymmetrical divinyl monomers targeting hyperbranched vinyl polymers

Reversible addition–fragmentation chain transfer (RAFT) mediated radical polymerizations of allyl methacrylate and undecenyl methacrylate, compounds containing two types of vinyl groups with different reactivities, were investigated to provide hyperbranched polymers. The RAFT agent benzyl dithiobenzoate was demonstrated to be an appropriate chain‐transfer agent to inhibit crosslinking and obtain polymers with moderate‐to‐high conversions. The polymerization of allyl methacrylate led to a polymer without branches but with five‐ or six‐membered rings. However, poly(undecenyl methacrylate) showed an indication of branching rather than intramolecular cycles. The hyperbranched structure of poly(undecenyl methacrylate) was confirmed by a combination of ¹H, ¹³C, ¹H–¹H correlation spectroscopy, and distortionless enhancement by polarization transfer 135 NMR spectra. The branching topology of the polymers was controlled by the variation of the reaction temperature, chain‐transfer‐agent concentration, and monomer conversion. The significantly lower inherent viscosities of the resulting polymers, compared with those of linear analogues, demonstrated their compact structure. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 26–40, 2007     

SYNTHESIS OF HETEROARM STAR-SHAPED POLYMER BY THE USE OF POLYFUNCTIONAL CHAIN-TRANSFER AGENT via CONVENTIONAL FREE RADICAL POLYMERIZATION

Heteroarm star-shaped polymers were synthesized by conventional free radical polymerization in two steps by the use of polyfunctional chain transfer agent.In the first step,free radical polymerization of methyl methacrylate was carried out in the presence of a polyfunctional chain transfer agent,pentaerythritol tetrakis(3-mercaptopropinate).At appropriate monomer conversions,two-arm PMMA having two residual thiol groups at the chain center or three-arm PMMA having one residual thiol group at the core wer...