Synthesis, characterisation and speciation studies of heterobimetallic pyridinehydroxamate-bridged Pt(II)/M(II) complexes (M = Cu, Ni, Zn). Crystal structure of a novel heterobimetallic 3-pyridinehydroxamate-bridged Pt(II)/Cu(II) wave-like coordination polymer

The reaction of cis-[Pt(NH3)2(3-pyhaH)2]2+ (3-pyhaH = 3-pyridinehydroxamic acid) and cis-[Pt(NH3)2(4-pyhaH)2]2+ (4-pyhaH = 4-pyridinehydroxamic acid) with Cu(II), Ni(II) or Zn(II) in aqueous solution affords novel heterobimetallic pyridinehydroxamate-bridged complexes, {cis-[Pt(NH3)2(mu-3-pyha)M(mu-3-pyha)].SO4.xH2O}n and {cis-[Pt(NH3)2(mu-4-pyha)M(mu-4-pyha)].SO4.xH2O}n respectively. The crystal and molecular structure of one of these, {cis-[Pt(NH3)2(mu-3-pyha)Cu(mu-3-pyha)]SO4.8H2O}n 3a, has been determined and was found to be a novel heterobimetallic wave-like coordination polymer, the structure of which contains interlinked pyridinehydroxamate-bridged repeating units of Pt(II) and Cu(II) ions in slightly distorted square-planar N4 and O4 coordination environments respectively and extensive hydrogen-bonding through the Pt ammines and the deprotonated hydroxamate O and via the O of the SO4(2-) counterions and the H(N) of the hydroxamate moiety. Spectrophotometric and speciation studies on the other heterobimetallic systems confirm that very similar species are being formed in solution and based on elemental analysis and spectroscopic results analogous complexes are formed in the solid-state. In this paper, we report the first examples of coordination polymers incorporating both Pt(II)/Cu(II), Pt(II)/Ni(II) and Pt(II)/Zn(II) and containing pyridinehydroxamic acids as bridging scaffolds.     

Reversible and selective amine interactions of [Cd(mu2-N,O-p-NH2C6H4SO3)2(H2O)2]n

[Cd(mu2-N,O-p-NH2C6H4SO3)2(H2O)2]n (1) is a layered coordination compound. The solid-vapor reactions between crystalline 1 and a series of volatile amines were investigated and the corresponding amine adducts were characterized by EA, TGA, PXRD and IR. Among them, the C2H5NH2 and C3H7NH2 adducts, namely [Cd(C2H5NH2)4(H2O)2](H2NC6H4SO3)2 (3) and [Cd(C3H7NH2)4(O-p-H2NC6H4SO3)2].C3H7NH2 (4), grew into single crystals in situ from the solid-vapor reaction processes and their crystal structures were characterized. In both cases, 4 mol equiv. of amine molecules coordinate to Cd(II) via replacing the N,O-p-NH2C6H4SO3 ligands or coordinated water molecules. The single-phase product suggests that the solid-vapor reaction between the metal sulfonate and volatile alkylamines could be used as a green process to synthesize monoamine-coordinated Cd(II) complexes without any solvent and routine separation. Finally, the substitution reaction is reversible at room conditions and selective for primary alkylamines.     

铊(I)离子选择电极动力学分析法测定超痕量铁

Fe(II) induces the reaction between Tl3+ and H2O2. The rate of reaction is linearly proportional to the concentration of Fe2+ in the range 2.5 ?10-9-2.5 ?10-8 mol dm-3 (20? and 5 ?10-9-5 ?10-8 mol dm-3 (15?. The standard deviation is less than 0.071 ?10-8. A 1000-fold excess of Zn2+, Cd2+, Mg2+, Ni2+, Pb2+, Ba2+, Ca2+, Li+, Na+, Ag+, NO3-, SO42-, AcO-, HPO42-, 500-fold excess of Al3+, Fe3+, Co2+, Hg2+ and 100-fold excess of Ti4+, Cr3+, Cu2+, Br-, Cl- can be tolerated, but reducing agents such as (NH2)2SO4, NH2OH.HCl interfered. This kinetic method was applied to determine Fe(II) in standard zinc sample and fountain water, with satisfactory results.     

Influence of the crystal field stabilization energy of metal(II) ions on the structural distortion of matrix-isolated SO4(2-) guest ions in selenate matrices

Infrared spectra of metal(II) selenate hydrates (MeSeO4.nH2O and Na2Me(SeO4)2.2H2O; n=6, 5, 4, 1; Me=Mg, Mn, Co, Ni, Cu, Zn, Cd) containing matrix-isolated SO42- guest ions are reported and discussed with respect to the S-O stretching modes 3 and 1. An adequate measure for the SO42- guest ion distortion is the site group splitting deltanuas (deltanuab and deltanuac in the case of a doublet and a triplet for 3, respectively; a, being the highest wavenumbered component of nu3) and deltanumax (the difference between the highest and the lowest wave numbered S-O stretching modes). It has been shown that the SO42- guest ion distortion depends on both the number of the sulfate oxygen atoms involved in coordinative bonds with the metal(II) ions and the electronic configuration of the metal(II) ions, i.e. their crystal field stabilization energy (CFSE) additionally to the site symmetry and the local potential at the lattice site of the host lattice. The SO42- guest ions matrix-isolated in MeSeO4.H2O (Me=Mn, Co, Zn) and in Na2Me(SeO4)2.2H2O (Me=Mn, Cu, Cd) exhibit three bands corresponding to the nu3 modes as deduced from the site group analysis and deltanuab approximately equal to deltanubc. When SO42- guest ions are incorporated in the triclinic Na2Me(SeO4)2.2H2O host lattices (Me=Co, Ni, Zn) the nu3 stretching region resembles a higher local symmetry of the SO42- guest ions (an approximate (A1 + E) splitting) than the crystallographic one (i.e. deltanuab>deltanubc instead of deltanuab approximately equal to deltanubc) and, hence, the ratio deltanuab/deltanubc has to be taken into account (the higher value of the ratio deltanuab/deltanubc, the weaker is the distortion of the SO42- guest ions). The SO42- guest ions incorporated in MeSeO4.nH2O (n=6, 5, 4) exhibit a higher local symmetry of the guest ions than that deduced from the site group analysis (D2d for the SO42- guest ions in MeSeO4.5H2O, MeSeO4.4H2O and in the monoclinic MeSeO4.6H2O host lattices and close to Td in the tetragonal MeSeO4.6H2O host lattices). The analysis of the infrared spectra of selenate host lattices containing SO42- guest ions reveals that the guest ions are stronger distorted when the adjacent metal(II) ions have CFSE not equal to 0. These ions are more resistant to angular deformations of the MeO6-octahedra (i.e. changes in the O-Me-O bond angles), thus facilitating the SO42- guest ion distortion as compared to those having CFSE=0 which allow stronger angular deformations of the respective metal octahedra. Infrared spectra of kieserite-type compounds MeSeO4.H2O (Me=Mn, Co, Zn) containing matrix-isolated SO42- guest ions and Me'2+ guest ions different from those of the host ions (i.e. Me'SO4.H2O in MeSeO4.H2O) are also presented and discussed (double matrix-spectroscopy).     

采用微量热法研究重金属离子对脲酶催化水解反应的影响

利用微量热计Micro DSCⅢ对重金属离子影响脲酶催化水解反应的过程进行研究, 并探讨重金属离子联合抑制作用对脲酶催化反应的影响. 结果表明, 在25℃下, 重金属离子对脲酶水解反应热有影响, 在广泛浓度范围(0.1, 1, 10, 100和10³ mg/L)内, 这种影响不仅表现在抑制作用方面, 而且会促进其水解反应的进行, 如铜离子在100和1000 mg/L时抑制率分别为(0.49±0.20)%和(-11.93±1.34)%. 重金属离子浓度与抑制率具有显著或极显著的相关性, 抑制效果的顺序为砷离子>铅离子>镉离子>铜离子. 当重金属离子联合抑制时, 其抑制效果与抑制率较高的重金属离子的抑制作用接近.     

Determination of the urease activity and the relative inhibition in the presence of some metal ions: a microcalorimetric study

Batch microcalorimetry has been employed to obtain a calibration curve for the enzymatic activity of urease in solution.This method is simplier, more reliable and easier to handle than the more common techniques (spectrophotometry and potentiometry), because it is based on direct investigation of the enzymatic reaction.By comparison with calorimetric studies employing the thermistor combined with the immobilized, enzyme, this method also allows the catalytic activity to be measured.Variations in the urease activity in the presence of nine metal ions [Hg(II), Ag(I), Cu(II),Zn(II), Cd(II), Ni(II), Co(II), Mn(II) and Mg(II)] are also described.A graphic method has been devised for immediate identification of the minimum inhibitor concentration,determining the start, 50% and complete inhibition of ureasic activity.     

复合纤维素固定化脲酶对铜离子的吸附作用

脲酶对重金属离子极为敏感。由复合纤维素（CC）固定化脲酸对铜离子的吸附现象得出的结论是：脲酶吸附的Cu~(2+)总量与其活性没有定量关系，而是与固酶重量成比例。从而可以认为，重金属离子不是直接作用于脲酶活性部位使其中毒的，很可能是作用于脲酶大分子其他部位，使分子构象变形后导致脲酶失活的。由于CC固酶对Cu~(2+)有吸附作用，且又不污染系统，所以可用其除去食品、药物及水中的Cu~(2+)离子。     

Coordination chemistry of conformation-flexible 1,2,3,4,5,6-cyclohexanehexacarboxylate: trapping various conformations in metal-organic frameworks

To study the conformations of 1,2,3,4,5,6-cyclohexanehexacarboxylic acid (H(6)L), eleven new coordination polymers have been isolated from hydrothermal reactions of different metal salts with 1e,2a,3e,4a,5e,6a-cyclohexanehexacarboxylic acid (3e+3a, H(6)L(I)) and characterized. They are [Cd(12)(mu(6)-L(II))(mu(10)-L(II))(3)(mu-H(2)O)(6)(H(2)O)(6)]16.5 H(2)O (1), Na(12)[Cd(6)(mu(6)-L(II))(mu(6)-L(III))(3)]27 H(2)O (2), [Cd(3)(mu(13)-L(II))(mu-H(2)O)] (3), [Cd(3)(mu(6)-L(III))(2,2'-bpy)(3)(H(2)O)(3)]2 H(2)O (4), [Cd(4)(mu(4)-L(VI))(2)(4,4'-Hbpy)(4)(4,4'-bpy)(2)(H(2)O)(4)]9.5 H(2)O (5), [Cd(2)(mu(6)-L(II))(4,4'-Hbpy)(2)(H(2)O)(10)]5 H(2)O (6), [Cd(3)(mu(11)-L(VI))(H(2)O)(3)] (7), [M(3)(mu(9)-L(II))(H(2)O)(6)] (M=Mn (8), Fe (9), and Ni (10)), and [Ni(4)(OH)(2)(mu(10)-L(II))(4,4'-bpy)(H(2)O)(4)]6 H(2)O (11). Three new conformations of 1,2,3,4,5,6-cyclohexanehexacarboxylate, 6e (L(II)), 4e+2a (L(III)) and 5e+1a (L(VI)), have been derived from the conformational conversions of L(I) and trapped in these complexes by controlling the conditions of the hydrothermal systems. Complexes 1 and 2 have three-dimensional (3D) coordination frameworks with nanoscale cages and are obtained at relatively low temperatures. A quarter of the L(I) ligands undergo a conformational transformation into L(II) while the others are transformed into L(III) in the presence of NaOH in 2, while all of the L(I) are transformed into L(II) in the absence of NaOH in 1. Complex 3 has a 3D condensed coordination framework, which was obtained under similar reaction conditions as 1, but at a higher temperature. The addition of 2,2'-bipyridine (2,2'-bpy) or 4,4'-bipyridine (4,4'-bpy) to the hydrothermal system as an auxiliary ligand also induces the conformational transformation of H(6)L(I). A new L(VI) conformation has been trapped in complexes 4-7 under different conditions. Complex 4 has a 3D microporous supramolecular network constructed from a 2D L(III)-bridged coordination layer structure by pi-pi interactions between the chelating 2,2'-bpy ligands. Complexes 5-7 have different frameworks with L(II)/L(VI) conformations, which were prepared by using different amounts of 4,4'-bpy under similar synthetic conditions. Both 5 and 7 are 3D coordination frameworks involving the L(VI) ligands, while 6 has a 3D microporous supramolecular network constructed from a 2D L(II)-bridged coordination layer structure by interlayer N(4,4'-Hbpy)--HO(L(II)) hydrogen bonds. 3D coordination frameworks 8-11 have been obtained from the H(6)L(I) ligand and the paramagnetic metal ions Mn(II), Fe(II), and Ni(II), and their magnetic properties have been studied. Of particular interest to us is that two copper coordination polymers of the formulae [{Cu(II) (2)(mu(4)-L(II))(H(2)O)(4)}{Cu(I) (2)(4,4'-bpy)(2)}] (12 alpha) and [Cu(II)(Hbtc)(4,4'-bpy)(H(2)O)]3 H(2)O (H(3)btc=1,3,5-benzenetricarboxylic acid) (12 beta) resulted from the same one-pot hydrothermal reaction of Cu(NO(3))(2), H(6)L(I), 4,4'-bpy, and NaOH. The Hbtc(2-) ligand in 12 beta was formed by the in situ decarboxylation of H(6)L(I). The observed decarboxylation of the H(6)L(I) ligand to H(3)btc may serve as a helpful indicator in studying the conformational transformation mechanism between H(6)L(I) and L(II-VI). Trapping various conformations in metal-organic structures may be helpful for the stabilization and separation of various conformations of the H(6)L ligand.     

Synthesis and characterization of ionic liquids containing copper, manganese, or zinc coordination cations

Copper-, manganese-, and zinc-based ionic liquids (Cu{NH(2)CH(2)CH(2)OH}(6)[CH(3)(CH(2))(3)CH(C(2)H(5))CO(2)](2) (2), Cu{NH(CH(2)CH(2)OH)(2)}(6)[CH(3)(CH(2))(3)CH(C(2)H(5))CO(2)](2) (3A), Cu{NH(CH(2)CH(2)OH)(2)}(6)[CF(3)SO(3)](2) (3B), Cu{NH(CH(2)CH(2)OH)(2)}(6)[(CF(3)SO(2))(2)N](2) (3C), Mn{NH(CH(2)CH(2)OH)(2)}(6)[CF(3)SO(3)](2) (4), and Zn{NH(2)CH(2)CH(2)OH}(6)[CF(3)SO(3)](2) (5)) are synthesized in a single-step reaction. Infrared data suggest that ethanolamine preferentially coordinates to the metal center through the amine group in 2 and the hydroxyl group in 5. In addition, diethanolamine coordinates through the amine group in 3A, 3C, and 4 and the hydroxyl group in 3B. The compounds are viscous (>1000 cP) at room temperature, but two (3C and 4) display specific conductivities that are reasonably high for ionic liquids (>20 mS cm(-1)). All of the compounds display a glass transition (T(g)) below -50 °C. The cyclic voltammograms (CVs) of 2, 3A, 3B, and 3C display a single quasi-reversible wave associated with Cu(II)/Cu(I) reduction and re-oxidation while 5 shows a wave attributed to Zn(II)/Zn(0) reduction and stripping (re-oxidation). Compound 4 is the first in this new family of transition metal-based ionic liquids (MetILs) to display reversible Mn(II)/Mn(III) oxidation and re-reduction at 50 mV s(-1) using a glassy carbon working electrode.     

Alternatives for the reduction of Cu(II) ion levels in hemodialysis membranes produced from sugar-cane bagasse

The objective of the present study was to seek alternatives for the reduction of Cu(II) ion levels in hemodialysis membranes produced by the cuprammonium process. The alternatives used were: (a) replacement of the solvent Cu(NH₃)₄(OH)₂, used in the original process, with Cu(EDA)₂(OH)₂, and (b) increasing the reflux time of the bagasse purification process from 1.5 to 3.0 h. The experimental results were obtained by analysis of Cu(II) content in the membranes by atomic absorption, by complexometry via UV/Vis spectroscopy of the solutions of filter paper, bagasse and lignin, and by monitoring the various stages of the purification process (by FTIR and by loss of mass), i.e. pretreatment with 0.25 M NaOH followed by treatment with 4.2 M EDA and reflux with EtOH/HNO₃ (20%, v/v). The results showed that the Cu(II) content in the membranes decreased with the use of the Cu(EDA)₂(OH)₂ solvent, that the purification process could not be improved further since cellulose degradation was observed, and that the Cu(II) content in the membranes produced was still to high for their use for hemodialysis treatment.     

Preparation, characterization and biological activity of Fe(III), Fe(II), Co(II), Ni(II), Cu(II), Zn(II), Cd(II) and UO(2)(II) complexes of new cyclodiphosph(V)azane of sulfaguanidine

Novel hexachlorocyclodiphosph(V)azane of sulfaguanidine, H(4)L, l,3-[N'-amidino-sulfanilamide]-2,2,2,4,4,4-hexachlorocyclodiphosph(V)azane was prepared and its coordination behaviour towards the transition metal ions Fe(III), Fe(II), Co(II), Ni(II), Cu(II), Zn(II), Cd(II) and UO(2)(II) was studied. The structures of the isolated products are proposed based on elemental analyses, IR, UV-vis, (1)H NMR, mass spectra, reflectance, magnetic susceptibility measurements and thermogravimetric analysis (TGA). The hyperfine interactions in the isolated complex compounds were studied using 14.4keV gamma-ray from radioactive (57)Co (M?ssbauer spectroscopy). The data show that the ligand are coordinated to the metal ions via the sulfonamide O and deprotonated NH atoms in an octahedral manner. The H(4)L ligand forms complexes of the general formulae [(MX(z))(2)(H(2)L)H(2)O)(n)] and [(FeSO(4))(2) (H(4)L) (H(2)O)(4)], where X=NO(3) in case of UO(2)(II) and Cl in case of Fe(III), Co(II), Ni(II), Cu(II), Zn(II) and Cd(II). The molar conductance data show that the complexes are non-electrolytes. The thermal behaviour of the complexes was studied and different thermodynamic parameters were calculated using Coats-Redfern method. Most of the prepared complexes showed high bactericidal activity and some of the complexes show more activity compared with the ligand and standards.     

Reaction between copper(I)-thiourea and bismuth(III)-thiourea complexes in presence of iodide. New spot-tests for copper(II) and bismuth(III)

New and very simple spot tests are described for the detection of Bi(III), Cu(II) and I(-) ions with limits of detection of 3, 8, and 75 mug/0.05 ml respectively. Tests are also described for such combinations as Bi(III) + I(-); Bi(III) + Cu(II); and Bi(III) + Cu(II) + I(-). All the tests are based on the formation of an orange or red-orange precipitate of bismuth(III)-copper(I)-iodide-thiourea complex, for which the formula [Bi(tu)(3)I(3).Cu(tu)(3)I] (where tu = thiourea) is proposed. This complex is produced in various ways by the interaction of Bi(III), Cu(II), and I(-) ions with thiourea. Most cations and anions do not interfere, but Tl(I), Cs(I), SO(2-)(3), S(2)O(2-)(3), EDTA, and oxidizing ions such as NO(-)(2), IO(-)(3), IO(-)(4), BrO(-)(3), and MnO(-)(4) do. The complex hexakis(thioureato)sulphatomonoaquodicopper(I) [Cu(2)(tu)(6)SO(4).H(2)O] is proposed as a new spot-test reagent for Bi(III) and I(-) ions, although the sensitivity for the latter is poor.     

Preparation, characterization and metal sorption studies of a Chrome-Azurol-S-loaded anion-exchange resin

Chrome Azurol S (CS) was mobilized on an strongly basic anion-exchange resin (Dowex 2 x 4, in Cl(-) form) by batch equilibration. The modified resin was stable in acetate buffer solution and in 0.1 M HCl and H(2)SO(4), but it was readily degraded with 2-6 M HCl and HNO(3). Retention of Ba(II), Sr(II), Ca(II), Mg(II), Al(III), Cr(III), Zn(II), Fe(III), Ti(IV), Mn(II), Co(II), Ni(II), Cu(II), Cd(II) and Pb(II) was studied using the batch equilibration method. The uptake and recovery yields were determined by using inductively-coupled plasma atomic emission spectroscopy (for Mg, Al, Cr, Ti, Fe, Mn, Ni, Zn, Cu, Cd and Pb) and atomic absorption spectrophotometry (for Ba, Sr, Ca and Co). The optimum pH value was established for performing a selective separation of Al(III) from the other metal ions. The sorption capacities of the CS-loaded resing for Al(III), Cr(III), Mg(II) (at pH 6), Fe(III) (at pH 5) and Ti(IV) (at pH 4) were 14, 2.9, 0.3, 3 and 3.9 mumoles g(-1) respectively. On this basis a method for separating Al(III) from other cations was established.     

Density functional theory-based prediction of some aqueous-phase chemistry of superheavy element 111. Roentgenium(I) is the "softest" metal ion

A previous approach (Hancock, R. D.; Bartolotti, L. J. Inorg. Chem. 2005, 44, 7175) using DFT calculations to predict log K1 (formation constant) values for complexes of NH3 in aqueous solution was used to examine the solution chemistry of Rg(I) (element 111), which is a congener of Cu(I), Ag(I), and Au(I) in Group 1B. Rg(I) has as its most stable presently known isotope a t(1/2) of 3.6 s, so that its solution chemistry is not easily accessible. LFER (Linear free energy relationships) were established between DeltaE(g) calculated by DFT for the formation of monoamine complexes from the aquo ions in the gas phase, and DeltaG(aq) for the formation of the corresponding complexes in aqueous solution. For M2+, M3+, and M4+ ions, the gas-phase reaction was [M(H2O)6]n+(g) + NH3(g) = [M(H2O)5NH3]n+(g) + H2O(g) (1), while for M+ ions, the reaction was [M(H2O)2]+(g) + NH3(g) = [M(H2O)NH3]+(g) + H2O(g) (2). A value for DeltaG(aq) and for DeltaE for the formation of M = Cu2+ in reaction 1, not obtained previously, was calculated by DFT and shown to correlate well with the LFER obtained previously for other M2+ ions, supporting the LFER approach used here. The simpler use of DeltaE values instead of DeltaG(aq) values calculated by DFT for formation of monoamine complexes in the gas phase leads to LFER as good as the DeltaG-based correlations. Values of DeltaE were calculated by DFT to construct LFER with M+ = H+, and the Group 1B metal ions Cu+, Ag+, Au+, and Rg+, and with L = NH3, H2S, and PH3 in reaction 3: [M(H2O)2]+(g) + L(g) = [M(H2O)L]+g) + H2O(g) (3). Correlations involving DeltaE calculated by DMol3 for H+, Cu+, Ag+, and Au+ could reliably be used to construct LFER and estimate unknown log K1 values for Rg(I) complexes of NH3, PH3, and H2S calculated using the ADF (Amsterdam Density Functional) code. Log K1 values for Rg(I) complexes are predicted that suggest the Rg(I) ion to be a very strong Lewis acid that is extremely "soft" in the Pearson hard and soft acids and bases sense.     

Synthesis and Metal Collecting Properties of Mono,Di, Tri and Tetramine Based on Silica Gel Matrix

Abstract

Silica gels, chemically modified with mono, di, tri and tetramine (I - IV), were synthesized. The monoamine (I) was produced directly via the reaction of silica gel with 3-aminopropyltrimethoxysilane. The diamine (II), triamine (III) and tetramine (IV) were produced through the reaction of ethylenediamine (EDA), diethylenetriamine (DETA) and triethylenetetramine (TETA) with 3-chloropropyltrichloromethane modified silica gel, respectively. The sorption properties of the phases (I - IV) toward Co(II), Ni(II), Cu(II), Zn(II), Cd(II) and Pb(II) were investigated at different pH-values based on the batch equilibrium technique, The, metal uptake capacities (mmol/g) were determined and discussed in terms of the structure of the aliphatic amines and the increasing number of nitrogen donor atoms. The metal capacity values demonstrate the higher efficiency of phases III and IV than phases I and II for preconcentration of such metal ions. Moreover, the use of phases III and IV for selective extraction of Cu(II) and Ni(II) is promising.     

Synthetic analogue approach for the functional domains of copper(II) bleomycins and its DNA cleavage activity

The dicopper(II) complex [Cu2(R'SSR)2(SO4)2] (1), where R'SSR is a Schiff base, has been prepared from the reaction of CuSO4.5H2O with the Schiff base N,N'-1,1'-dithiobis(ethylenesalicylaldimine)(H2RSSR) and structurally characterized by X-ray crystallography. The crystal structure of 1 shows two {Cu(R'SSR)}2+ units linked by two sulfate ligands each showing a eta3,mu2-binding mode. The Cu...Cu distance is 4.562(2)A with each copper having a square pyramidal (4 + 1) CuNO4 coordination geometry. The monoanionic Schiff base R'SSR has a pendant cationic amine -SCH2CH2NH3+ group which is presumably formed from the hydrolysis of one imine bond of H2RSSR. Complex 1 models the N- and C-terminus domains of bleomycins. The metal centers in 1 are essentially magnetically non-interacting giving a -2J value of 3 cm(-1) with the singlet as the ground state. Using complex 1 as a precursor, ternary copper(II) complexes [Cu(R'SSR)B(SO4)] (2-4)- are prepared, characterized and their DNA binding and cleavage properties studied (B: kanamycin A, 2; 2,2'-bipyridine, 3; 1,10-phenanthroline, 4). IR spectral data suggest a square pyramidal (4 + 1) geometry for the one-electron paramagnetic ternary complexes with the sulfate bound to copper. The complexes are non-conducting in DMF but show conductivity in aqueous medium due to dissociation of the sulfate ligand. They bind to calf thymus DNA in the minor groove giving the relative order: 4 > 2 > 1 approximately 3 (Kapp= 5.4 x 10(5) M(-1) for 4). The precursor complex 1 does not show any apparent chemical nuclease activity when treated with supercoiled (SC) DNA in the presence of 3-mercaptopropionic acid (MPA). The kanamycin A and phen adducts as such or generated under in situ reaction conditions using 1 nd the ligand display efficient chemical nuclease activity in the presence of MPA, while the bpy species shows poor cleavage activity. The ternary kanamycin A complex presents the first synthetic model for three functional domains of bleomycins.     

3d-Metal derivatives of the [Cu(I)(SO3)4]7- ion: structure and magnetism

The Cu(SO(3))(4)(7-) anion, which consists of a tetrahedrally coordinated Cu(I) centre coordinated to four sulfur atoms, is able to act as a multidentate ligand in discrete and infinite supramolecular species. The slow oxidation of an aqueous solution of Na(7)Cu(SO(3))(4) yields a mixed oxidation state, 2D network of composition Na(5){[Cu(II)(H(2)O)][Cu(I)(SO(3))(4)]}·6H(2)O. The addition of Cu(II) and 2,2'-bipyridine to an aqueous Na(7)Cu(SO(3))(4) solution leads to the formation of a pentanuclear complex of composition {[Cu(II)(H(2)O)(bipy)](4)[Cu(I)(SO(3))(4)]}(+); a combination of hydrogen bonding and π-π stacking interactions leads to the generation of infinite parallel channels that are occupied by disordered nitrate anions and water molecules. A pair of Cu(SO(3))(4)(7-) anions each act as a tridentate ligand towards a single Mn(II) centre when Mn(II) ions are combined with an excess of Cu(SO(3))(4)(7-). An anionic pentanuclear complex of composition {[Cu(I)(SO(3))(4)](2)[Fe(III)(H(2)O)](3)(O)} is formed when Fe(II) is added to a Cu(+)/SO(3)(2-) solution. Hydrated ferrous [Fe(H(2)O)(6)(2+)] and sodium ions act as counterions for the complexes and are responsible for the formation of an extensive hydrogen bond network within the crystal. Magnetic susceptibility studies over the temperature range 2-300 K show that weak ferromagnetic coupling occurs within the Cu(II) containing chains of Na(5){[Cu(II)(H(2)O)][Cu(I)(SO(3))(4)]}·6H(2)O, while zero coupling exists in the pentanuclear cluster {[Cu(II)(H(2)O)(bipy)](4)[Cu(I)(SO(3))(4)]}(NO(3))·H(2)O. Weak Mn(II)-O-S-O-Mn(II) antiferromagnetic coupling occurs in Na(H(2)O)(6){[Cu(I)(SO(3))(4)][Mn(II)(H(2)O)(2)](3)}, the latter formed when Mn was in excess during synthesis. The compound, Na(3)(H(2)O)(6)[Fe(II)(H(2)O)(6)](2){[Cu(I)(SO(3))(4)](2)[Fe(III)(H(2)O)](3)(O)}·H(2)O, contained trace magnetic impurities that affected the expected magnetic behaviour.     

A dip-and-read test strip for the determination of mercury(II) ion in aqueous samples based on urease activity inhibition.

A sensitive dip-and-read test strip for the determination of mercury in aqueous samples based on the inhibition of urease reaction by the ion has been developed. The strip has a circular sensing zone that containing two layers: the top layer is a cellulose acetate membrane where urease is immobilized on it; the bottom layer is a pH indicator wafer that is impregnated with urea. The principle of the measurement is based on the disappearance of a yellow spot on the pH indicator wafer. The elapsing time until the disappearance of the spot which depends on the concentration of mercury(II) ion is measured with a stopwatch. Under the experimental conditions, as low as 0.2 ng/ml mercury can be observed with the detection range from 0.2 to 200 ng/ml in water. Organomercury compounds give essentially the same response as inorganic mercury. Heavy-metal ions such as Ag(I), Cu(II), Cd(II), Ni(II), Zn(II), and Pb(II) as well as other sample matrixes basically do not interfere with the mercury measurement.     

Amberlite XAD-7 impregnated with Xylenol Orange: a chelating collector for preconcentration of Cd(II), Co(II), Cu(II), Ni(II), Zn(II) and Fe(III) ions prior to their determination by flame AAS

A new chelating resin, Xylenol Orange coated Amberlite XAD-7, was prepared and used for preconcentration of Cd(II), Co(II), Cu(II), Fe(III), Ni(II) and Zn(II) prior to their determination by flame atomic absorption spectrophotometry. The optimum pH values for quantitative sorption of Cd(II), Co(II), Cu(II), Fe(III), Ni(II) and Zn(II) are 4.5-5.0, 4.5, 4.0-5.0, 4.0, 5.0 and 5.0-7.0, respectively, and their desorptions by 2 mol L(-1) HCl are instantaneous. The sorption capacity of the resin has been found to be 2.0, 2.6, 1.6, 1.6, 2.6 and 1.8 mg g(-1) of resin for Cd, Co, Cu, Fe, Ni and Zn, respectively. The tolerance limits of electrolytes, NaCl, NaF, NaI, NaNO3, Na2SO4 and of cations, Mg2+ and Ca2+ in the sorption of the six metal ions are reported. The preconcentration factor was between 50 and 200. The t1/2 values for sorption are found to be 5.3, 2.9, 3.2, 3.3, 2.5 and 2.6 min for the six metals, respectively. The recoveries are between 96.0 and 100.0% for the different metals at preconcentration limits between 10 to 40 ng mL(-1). The preconcentration method has been applied to determine the six metal ions in river water samples after destroying the organic matter (if present in very large amount) with concentrated nitric acid (RSD < or = 8%, except for Cd for which it is upto 12.6%) and cobalt content of vitamin tablets with RSD of approximately 3.0%.     

Construction and Application of an Electrochemical Sensor for Simultaneous Determination of Cd(II), Cu(II) and Hg(II) in Water and Foodstuff Samples

By incorporation of synthesized magnetite nanoparticles (Fe₃O₄ NPs) coated with a new Schiff base into carbon paste electrode, a novel modified electrode was constructed for simultaneous determination of ultra trace amounts of Cd(II), Cu(II) and Hg(II). The complexation reaction of Schiff base with metal ions was studied spectrophotometrically. Under optimal conditions a detection limit of 0.20, 0.90 and 1.00 ng mL^?1 for Cd(II), Cu(II) and Hg(II), respectively, was obtained. We take the advantages of the proposed method for simple, rapid, sensitive and selective simultaneous determination of trace amounts of hazardous Cd(II), Cu(II) and Hg(II) in water and foodstuff samples.