Catalytic carbon monoxide oxidation over CuO/CeO2 composite catalysts

Summary CeO₂ nanoparticles were prepared by thermal decomposition of cerous nitrate and then used as supports for CuO/CeO₂ catalysts prepared via the impregnation method. The samples were characterized by XRD, HRTEM, H₂-TPR and XPS. The catalytic properties of the catalysts for low-temperature CO oxidation were studied by using a microreactor-GC system.     

Effects of the preparation methods on the properties of Ni-La2O3-SiO2 catalysts for m -dinitrobenzene hydrogenation

Ni-La₂O₃-SiO₂ catalysts were prepared by wetness impregnation and sol-gel method followed by conventional drying and supercritical drying, respectively. Their physico-chemical properties and activity for the hydrogenation of m-dinitrobenzene to m-phenylenediamine were investigated by BET, XRD, TPR, H₂-TPD and activity tests. The results showed that the structural and catalytic properties of the Ni-La₂O₃-SiO₂ catalysts obviously depended on the preparation method and the drying mode. The catalyst prepared by the sol-gel method in combination with conventional drying exhibited the highest catalytic activity among the catalysts tested, attributable to its well-dispersed nickel particles and larger active nickel surface area.     

Usy supported Pt-bearing SO42?/ZrO2 catalysts promoted by Cr for hydroisomerization of n -heptane

The Pt-bearing SO₄ ²⁻/ZrO₂ catalysts doped with Cr and supported on USY zeolite were prepared by impregnation, and characterized by XRD and IR spectroscopy of pyridine adsorption. Their catalytic activities were evaluated in the hydroisomerization of n-heptane with a fixed-bed atmospheric reactor. The Cr-promoted catalysts exhibited much higher catalytic activity and selectivity for isomerization products than the catalysts without the Cr dopant. Both the conversion and selectivity were discussed in relation with the physicochemical properties of catalysts.     

TPD study on Cr/MgO catalysts for acrylonitrile synthesis from acetonitrile and methanol

Summary The TPD technique was used to investigate the desorption behaviour of methanol and acetonitrile on the Cr/MgO catalyst prepared by an impregnation method. Catalytic properties of the Cr/MgO catalysts for acrylonitrile synthesis from acetonitrile and methanol were also studied. The catalytic activities are related to the dissociative desorption temperature of CH₃OH or CH₃CN on the catalysts.     

Study of the acid-base properties of SiO2-supported NiMoO4 catalysts by temperature-programmed desorption: effect of the support

The acid-base properties of several NiMoO₄ catalysts supported on two silicas and prepared by different methods have been studied by temperature-programmed desorption of NH₃. The catalytic behavior in the oxidative dehydrogenation of isobutane for two NiMoO₄ catalysts with different acid-base properties are compared.     

SO42-/TiO2-ZrO2复合氧化物固体酸催化剂的长叶烯芳构化催化性能

本工作用溶胶-凝胶法制备不同组成的SO42-/TiO2-ZrO2复合氧化物固体酸催化剂,用微型催化反应评价结合X-射线粉末衍射(XRD)、孔结构/BET表面积测试和NH3-程序升温脱附(NH3-TPD)等表征了SO42-/TiO2-ZrO2复合氧化物固体酸催化剂结构、表面酸性和长叶烯芳构化催化性能。复合氧化物固体酸SO42-/TiO2-ZrO2催化剂具有优良的长叶烯芳构化催化性能,并且其芳构化催化性能与催化剂组成和表面酸性密切相关。随催化剂中nZr/(nZr+nTi)增加,催化剂表面中等强度的酸中心量增加,芳构化产物选择性和收率明显增加,在nZr/(nZr+nTi)=0.5时达极大值。随nZr/(nZr+nTi)进一步增加,不仅催化剂表面酸中心量减少、原料转化率明显下降,而且催化剂酸强度增强,导致芳构化产物选择性和收率下降。催化长叶烯芳构化的二元复合氧化物固体酸SO42-/TiO2-ZrO2催化剂适宜的组成为nZr/(nZr+nTi)=0.5。     

TiO_2-Al_2O_3复合载体的制备及Co-Mo/TiO_2-Al_2O_3催化剂加氢脱硫性能的研究

通过改进的溶胶-凝胶法(SG)、共沉淀法(CP)、表面沉淀法(PR)及混捏法(ME)制备TiO_2-Al_2O_3复合载体,考察了不同制备方法对复合载体物理性质的影响。采用浸渍法制备Co-Mo/TiO_2-Al_2O_3-X加氢脱硫催化剂,研究了Co-Mo/TiO_2-Al_2O_3-X加氢脱硫催化剂的脱硫性能。利用XRD、BET、SEM等表征手段对复合载体及催化剂进行表征分析。结果表明,SG法制备的复合载体粒径均一,具有较大的比表面积、孔径和孔体积;CP法制备复合载体时TiO_2以单层或亚单层的分散状态高度分散于γ-Al_2O_3中。在氢气压力3.0 MPa、反应温度280℃、反应时间4 h、液时空速1.4 h-1和氢油比600的条件下,SG法制备的Co-Mo/TiO_2-Al_2O_3催化剂具有较高加氢脱硫活性,噻吩转化率达到96.6%。     

柠檬酸络合浸渍法制备的Ag-Mn/γ-Al_2O_3-TiO_2催化剂用于丙烷催化燃烧

采用不同浸渍方法制备了系列Ag-Mn/γ-Al_2O_3-TiO_2催化剂,利用BET、XRD、TEM、XPS和H_2-TPR等技术对催化剂进行了表征,通过丙烷催化燃烧反应考察了催化性能。结果表明,与常规浸渍法相比,柠檬酸络合浸渍法促进了催化剂表面Ag与Mn颗粒的分散及加强了Ag与Mn之间的相互作用,从而提高了活性氧物种的相对含量和催化剂的低温还原性能,进而促进丙烷催化燃烧活性的提升。其中,络合浸渍法制备的Ag_1Mn_3/γ-Al_2O_3-TiO_2催化剂在263℃时丙烷转化率即可达90%。     

TiO2-Al2O3载体的制备方法对其负载的磷化镍催化剂加氢脱氮反应性能的影响

采用共沉淀法和原位溶胶-凝胶法制备了TiO₂-Al₂O₃复合载体,其负载的磷化镍催化剂采用等体积浸渍法和H₂原位还原法制备. 通过N₂吸附（BET）、X射线衍射（XRD）、透射电镜（TEM）、程序升温还原（TPR）,X射线光电子能谱（XPS）和等离子体发射光谱（ICP-AES）表征技术对催化剂进行了表征,并通过喹啉的加氢脱氮反应评价了催化剂的加氢脱氮性能. 结果表明,原位溶胶-凝胶法制成的复合载体基本保留了原有的γ-Al₂O₃的孔特征,具有较大的比表面积和较宽的孔分布,TiO₂主要以表面富集的形式分散在管状的γ-Al₂O₃表面,其负载的磷化镍催化剂还原后所形成的活性相为Ni₂P和Ni₁₂P₅;而共沉淀法制成的复合载体比表面积较小,孔径分布更加集中,TiO₂趋于在块状的Al₂O₃表面均匀分散,其负载的磷化镍催化剂具有更好的可还原性,还原后所形成的活性相为Ni₂P. 不同的载体制备方法和不同的钛铝比对催化剂加氢脱氮性能影响较大,当n（Ti）/n（Al）=1/8时,共沉淀法载体负载的催化剂表现出最佳的加氢脱氮性能,在340 ℃,3 MPa,氢油体积比500,液时空速3 h^-1的反应条件下,喹啉的脱氮率可以达到91.3%.     

NiO/γ-Al2O3催化剂中NiO与γ-Al2O3间的相互作用

利用溶胶－凝胶法制备了不同含量的 ＮｉＯ／γ－Ａｌ_２Ｏ_３催化剂,通过ＸＲＤ,ＸＰＳ和 ＴＰＲ等技术考察了制备方法、ＮｉＯ含量和焙烧温度对催化剂结构和Ｎｉ存在状态的影响,发现溶胶－凝胶法制备的催化剂活性组分ＮｉＯ与担体γ－Ａｌ_２Ｏ_３间具有强相互作用．详细地讨论了Ｎｉ物种的还原状态与以“Ｎｉ~０”为活性中心的催化反应的活性之间的关系．溶胶－凝胶法制备的催化剂经高温焙烧后,Ｎｉ以一种类尖晶石结构的固溶体形式存在,这种固溶体态尖晶石可能会抑制Ｎｉ的烧结和流失,提高催化剂的稳定性．     

焙烧温度对柴油车氧化催化剂Pt-Pd-（x）ZrO2/Ce0.3Zr0.7O2-Al2O3性能的影响

制备了氧化铝、铈锆固溶体复合氧化物负载铂、钯的双金属催化剂Pt-Pd/ Ce0.3Zr0.7O2-Al2O3,并添加3% ZrO2助剂改性,用于柴油车尾气中CO、HC和NO的催化氧化,其中贵金属负载量仅为0.68 wt%。考察了制备过程中焙烧温度对催化剂性能的影响。催化剂活性评价结果表明,与未添加ZrO2的催化剂比较。添加ZrO2明显提高了催化剂的低温氧化活性,而且焙烧温度对催化剂的氧化性能有较大影响。焙烧温度为800 ?C时,CO和C3H6的起燃温度最低,分别为168、189 ?C,焙烧温度为700 ?C时,NO转化为NO2的转化率最高,最大转化率为36%,具有较好的热稳定性。通过XRD、N2吸附-脱附、CO化学吸附、XPS、H2-TPR等表征手段考察了催化剂物理化学性质随焙烧温度的变化情况,并分析了与催化剂活性之间的关系,得到贵金属分散度、表面化学吸附氧含量、催化剂的还原性质对氧化性能有重要影响,发挥协同作用。进而可以通过优化焙烧温度提升柴油车氧化催化剂性能,对提高工业应用柴油车尾气后处理系统的净化效率有重要意义。     

Catalytic combustion of chlorobenzene over V2O5/TiO2 catalysts prepared by the precipitation-deposition method

Catalytic combustion of chlorobenzene over supported vanadium oxides has been investigated. TiO₂ was prepared by the sol-gel method from titanium isopropoxide. The supported vanadium oxide catalysts have been prepared by precipitation-deposition and impregnation method and characterized by XRD, FT-Raman and TPR. In the VO_x/TiO₂catalysts prepared using the impregnation method, when vanadium loading reaches 3 wt.%, the activity shows a maximum. However, in the VO_x/TiO₂catalysts prepared by precipitation-deposition, when vanadium loading reaches 7 wt.%, the activity shows a maximum. This result suggests that the precipitation-deposition can yield a higher metal loading on the support and a high dispersion compared to the impregnation method. This revised version was published online in August 2006 with corrections to the Cover Date.     

固相浸渍法制备NiO/CeO2催化剂及其在CO氧化反应中的应用

采用固相浸渍法制备了一系列NiO/CeO2催化剂,并通过与常规湿浸渍法比较,考察了制备方法对催化剂和CO氧化反应性能的影响.同时结合X射线衍射(XRD),N2吸附-脱附(BET),透射电镜(TEM),氢气-程序升温还原(H2-TPR),拉曼(Raman)光谱,X射线光电子能谱(XPS)等手段对催化剂的结构和表面物种分散状态进行了表征.CO氧化活性测试结果表明,当镍负载量相同时,固相浸渍法制备的催化剂相比于湿浸渍法表现出更好的催化性能.TEM、XPS、H2-TPR结果表明,固相浸渍法更有利于加强镍铈间的相互作用和得到高分散的镍物种,从而促进镍物种的还原.Raman结果表明固相浸渍法相比于湿浸渍法能产生更多氧空位,这有利于氧气在催化剂表面的活化,使得CO氧化反应更容易进行.     

不同P负载量对Co-Mo/γ-Al_2O_3煤焦油加氢脱硫性能影响的研究

以分步浸渍法在固定MoO_3、CoO含量(质量分数)为13.50%、2.11%的条件下,通过改变磷酸浓度,制备了不同P负载量的Co-Mo/γ-Al_2O_3催化剂。考察了不同的P负载量催化剂对内蒙古赤峰中温煤焦油加氢脱硫性能的影响。并以NH3程序升温脱附(NH_3-TPD)、X射线衍射(XRD)、X射线光电子能谱(XPS)等手段对催化剂的结构性质进行了表征。结果表明,适宜的P负载量可减弱活性组分与载体间的相互作用,利于活性组分均匀分散在载体表面,改善了催化剂的还原、硫化性能和酸性分布,从而提高了催化剂的加氢脱硫活性。当磷酸质量分数为4%时,催化剂表现出最佳的加氢脱硫性能,硫脱除率达到96.98%。不同P负载量Co-Mo/γ-Al_2O_3催化剂加氢脱硫活性对应的磷酸浓度顺序为:4%2%6%1%08%。     

Effect of the calcination temperature on the properties of Fe2O3/SiO2 catalysts for oxidation of hydrogen sulfide

The effect of the calcination temperature on the properties of supported iron oxide catalysts for hydrogen sulfide oxidation prepared by impregnation of silica with iron(III) nitrate has been studied. An increase in the calcination temperature was found to diminish the catalytic activity of the Fe₂O₃/SiO₂ catalysts in hydrogen sulfide oxidation. This behavior can be explained by the agglomeration of iron oxide particles and by a decrease in the surface concentration of active sites. It has been shown that an increase in the calcination temperature makes the catalyst more stable towards the sulfidation of the active component (Fe₂O₃) to the iron disulfide phase.     

Al2O3助剂对Co/SiC催化剂F-T反应性能的影响

分别采用沉淀法、尿素水解法制备Al₂O₃/SiC复合载体,采用等体积浸渍法制备Co/Al₂O₃-SiC催化剂。结合N₂吸附、XRD、H₂-TPR、XPS等表征手段,研究Al₂O₃助剂对钴基催化剂物相结构、还原行为以及F-T合成性能等的影响。结果表明,氧化铝加入后增强了载体与钴物种之间的相互作用,提高了钴物种的分散度,降低了钴物种的还原度。尿素水解法引入Al₂O₃后,载体与钴物种具有适中的相互作用,表现出较高的反应活性。沉淀法制备的载体负载钴物种后由于较强的金属-载体相互作用,表现出较优的稳定性。     

不同方法制备的CeO2载体对CuO/CeO2催化剂水煤气变换活性和稳定性的影响

分别采用沉淀法(A), 水热法(B)和柠檬酸溶胶-凝胶法(C)制备了三种CeO2材料, 并以其为载体采用沉积-沉淀法制备了CuO/CeO2催化剂. 运用N2物理吸附、粉末X射线衍射(PXRD)、原位粉末X射线衍射(in situ PXRD)、氢气-程序升温还原(H2-TPR)和循环伏安法(CV)等技术对其进行了表征, 考察了不同方法制备的CeO2载体对CuO/CeO2水煤气变换(WGS)催化剂的结构、氧化-还原性能、催化活性和稳定性的影响. 结果表明, 它们的催化活性和稳定性顺序都是CuO/CeO2-A>CuO/CeO2-B>CuO/CeO2-C. 联系表征结果, CuO/CeO2催化剂的活性与催化剂中CuO的颗粒度、CuO的微观应力和中等大小且与二氧化铈相互作用的CuO的数量等有关, 而这些因素很大程度上受CeO2载体本身的热稳定性的影响. 根据CV中扫描次数的增加, Cu2+←→Cu0氧化还原峰面积减小, 推断CuO/CeO2催化剂在一定条件下氧化还原是不可逆的, 这可能是其在反应气氛下经受温度循环之后活性降低的原因.     

Bulk and surface structures of V2O5/ZrO2 catalysts for n-butane oxidative dehydrogenation

The present investigation focuses on the structural properties and reactivity of zirconia-supported vanadium oxide catalysts, prepared by equilibrium adsorption in basic (pH 10) or in acid (pH 2.7) conditions with vanadium content up to 6 wt.% (pH 10) and up to 11.6 wt.% (pH 2.7). The samples, heated at 823 K for 5 h in air, were characterized by X-ray diffraction, Raman spectroscopy and TPR, both as prepared and after leaching with an ammonia solution to remove species not anchored to the zirconia surface. Some representative samples were also tested for the n-butane oxidative dehydrogenation (ODH) reaction. Depending on vanadium content, various vanadium species were identified by Raman spectroscopy that reacted differently on exposure to H₂. At similar loading, the fraction of vanadium in a dispersed state and thus interacting with the support was higher in samples prepared at pH 10 than in those at pH 2.7. Samples prepared at pH 2.7 contained a higher fraction of large polymeric structures in addition to ZrV₂O₇ and V₂O₅.In line with literature data for propane ODH on similar catalysts, our catalytic results suggested that the active sites for the ODH reaction are associated with the V–O–V bonds of the polymeric exposed structures, whereas the Zr–O–V sites favour alkane combustion.     

负载型CuO/TiO2催化剂催化CO2加氢制甲醇

采用浸渍法制备了CuO/TiO_2负载型催化剂,并将其用于CO2加氢制甲醇反应。重点考察了铜的负载量对催化剂性能的影响,并对其物化性能和催化性能之间的关系进行了讨论。结果发现,随着铜负载量的增加,催化剂中金属铜的比表面先增加后减小,当铜的负载量为10%(质量百分数)时达到最大值。催化剂的表面碱性位数量随铜含量的增加持续减小,中等碱位和强碱位的强度下降。当铜的负载量不高于10%时,CO2的转化率与铜的比表面积呈线性关系。甲醇选择性与催化剂的表面碱位性质有关,过强的碱性位会降低甲醇选择性。     

Nd,Ce和La改性对Ni/SBA-15催化剂在CH4/CO2重整反应中性能的影响

以稀土金属Nd,Ce或La的氧化物为助剂,采用β-环糊精浸渍法对Ni/SBA-15催化剂进行了改性,并运用X射线衍射、N₂吸附-脱附、程序升温还原和热重等手段考察了改性的催化剂在CO₂重整CH₄制合成气反应中的催化性能. 结果表明,Nd等稀土金属氧化物的添加对催化剂孔结构和晶相结构等性质影响不大,但可影响NiO的还原; Nd的添加使NiO与载体之间以Ni-Nd-O形式相互作用,促进了活性组分NiO的还原. 其中,Nd的添加量为5-10 wt%时所制备的催化剂在重整反应中的催化活性最高,且具有很强的抗积碳性能. La和Ce氧化物促进的Ni催化剂也表现出类似的性质和催化性能.