Interaction of tin (IV) chloride with sulfolane and between tin (IV) chloride and lithium chloride in sulfolane solution

Tin (IV) chloride reacts with sulfolane (S) to form a cis-octahedral adduct SnCl₄·S₂. Solutions of lithium chloride and tin (IV) chloride in sulfolane contain the complex ions SnCl ₅ ^– and SnCl ₆ ^2– at 11 and 21 mole ratios of constituents, respectively. The complexes are characterized by conductimetry and by Mössbauer, IR, and Raman spectroscopy.     

Spectrophotometric study of the reaction of Co(II) and Ni(II) with nitroso-R-salt and α-nitroso-β-naphthol

The complexes of Co(II) and Ni(II) with nitroso-R-salt are studied by conductometric titration and spectrophotometric methods in buffer solutions of differentpH. The study proved the possible formation of (11), (12) and (13) complexes for Co(II) while Ni(II) forms (11) and (12) complexes (metal:ligand) only. The factors affecting complex formation are established and the formation constants of the complexes are evaluated. The ir spectra of the solid complexes with -nitroso--naphthol revealed that the ligand exhibits the nitrosophenol structure and that the reaction takes place through proton displacement from the OH-group.

---

Spektrophotometrische Studie zur Reaktion von Co(II) und Ni(II) mit Nitroso-R-Salz und -Nitroso--naphthol

Zusammenfassung Es wurden die Komplexe von Co(II) und Ni(II) mit Nitroso-R-Salz mittels konduktometrischer und spektrophotometrischer Methoden in Puffer-Lösungen mit verschiedenempH untersucht. Für Co(II) wurden (11)-, (12)- und (13)-Komplexe gefunden, während für Ni(II) lediglich (11)- und (12)-Komplexe (Metall:Ligand) festgestellt werden konnten. Die Faktoren, die die Komplexierung bestimmen, werden diskutiert und die Komplexbildungskonstanten wurden bestimmt. Die IR-Spektren der Komplexe mit -Nitroso--naphthol zeigen, daß der Ligand in der Nitrosophenol-Form vorliegt und daß die Reaktion über eine Protonenverschiebung von der OH-Gruppe verläuft.

     

Effect of alkali ions (Na+, K+) on the solvent extraction of uranium(VI) with a di-carboxylated calix[4] arene

The solvent extraction of uranium(VI) with a di-carboxylated calix[4]arne (LH₂) in chloroform and 1,2-dichloroethane has been studied in the presence or absence of alkali ions (M=Na⁺,K⁺). For UO ₂ ²⁺ when studied alone, a 12 (metal: ligand) extracted species is evidenced, with a rather low associated extraction equilibrium constant. The efficiency of extraction increases drastically in the presence of alkali ions, due to the formation of heteronuclear complexes. In all cases, the extracted species are found to be both 122 and 112 (UO ₂ ²⁺ MLH₂) mixed complexes, except in chloroform with K⁺, where only the latter is formed. In the case of Na⁺, mass spectrometry spectra confirm the existence of both homo and heteronuclear complexes as determined in the extraction studies.     

Kinetics of chlorine isotope exchange reaction between sodium chloride-36 and triphenyltin chloride in mixed solvents

Isotope exchange reaction between NaCl-36 and triphenyltin chloride in dioxane-water (8020% w/w) and ethanol-water (9010% w/w) mixed solvents has been studied at 25, 35 and 50 °C. The exchange reaction was found to proceed via a bimolecular S_N2, limiting mechanism with reaction rates depending on the solvent used. Inhibition of the exchange in ethanol-water is probably due to solvation of chloride ion through hydrogen bond formation. The rate laws for the exchange reactions are: R_e=3.24×10⁹ e^–65550/RT [Rh₃SnCl] [NaCl] in dioxanewater and R_e=6.61×10⁸ e^–69600/RT [Ph₃SnCl] [NaCl] in ethanol-water, where is the degree of dissociation of NaCl and R_e is the rate of exchange in mol l^–1 s^–1. The activation parameters H^*, S^* and G^* are reported.     

Oxidation of analgin with triphenyltetrazolium chloride and chromatographic study of the products of the reaction

Summary In alkaline solution triphenyltetrazolium chloride (TTC) oxidizes analgin to 4-methylaminoantipyrine. The products of the reaction were identified chromatographically. The systemsn-butanol-acetic acid-water (415) and pentanol-acetic acid-water (415) were used as mobile phases. Dragendorff's reagent was used for detection. It was proved that the principal end-products of the oxidation of analgin with TTC are 4-methylaminoantipyrine and triphenylformazan.

---

Zusammenfassung In alkalischer Lösung oxydiert Triphenyltetrazoliumchlorid (TTC) Analgin zu 4-Methylaminoantipyrin. Die Reaktionsprodukte wurden chromatographisch identifiziert. Die Systeme n-Butanol: Essigsäure: Wasser (415) und PentanolEssigsäureWasser (415) wurden als mobile Phase verwendet. Zum Nachweis diente Dragendorffs Reagens. Als hauptsächliche Endprodukte wurden 4-Methylamino-antipyrin und Triphenylformazan erwiesen.

     

Properties of double chlorides in the systems ACl/NdCl3 (ANa-Cs)

The pseudobinary systems ACl/NdCl₃ (A=Na-Cs) were reinvestigated by means of DTA. The following double chlorides were found primarily detected compounds are underlined):Na ₃Nd₅Cl₁₈; K₃NdCl₆, K₂NdCl₅,KNd ₂Cl₇;Rb ₃NdCl₆, Rb₂NdCl₅,RbNd ₂Cl₇; Cs₃NdCl₆,Cs ₂NdCl₅,CsNd ₂Cl₇.With a galvanic cell for solid electrolytes the thermodynamic functions of formation from ACl and NdCl₃ together with the free enthalpies of synproportionation from the compounds adjacent in the phase diagrams were measured. They revealed, that only the compounds A₂NdCl₅ are stable at ambient temperature. All other compounds are existing by a gain of entropy only at higher temperatures.The crystal structures of the compounds were determined by X-ray analysis on powders: the compounds are isotypic with the analogous double chlorides of La and Ce (A₃NdCl₆: high-temperature-modification = elpasolite-type; at room-temperature = metastable K₃MoCl₆-type; A₂NdCl₅=K₂PrCl₅-type; ANd₂Cl₇=-KEr₂F₇-type; Na₃Nd₅Cl₁₈=Na₃La₅Cl₁₈-type). Magnetic susceptibilities in the range from 80 to 300 K were measured with a Gouy-balance.

---

Zusammenfassung Die pseudobinären Systeme ACl/NdCl₃ (A=Na-Cs) wurden mittels DTA neu untersucht. Folgende Doppelchloride wurden gefunden (erstmalig beschriebene Verbindungen sind unterstrichen):Na ₃Nd₅Cl₁₈; K₃NdCl₆, K₂NdCl₅,KNd ₂Cl₇;Rb ₃NdCl₆, Rb₂NdCl₅,RbNd ₂Cl₇; Cs₃NdCl₆,Cs ₂NdCl₅,CsNd ₂Cl₇.Mit einer galvanischen Zelle für feste Elektrolyte wurden die thermodynamischen Funktionen für die Bildung aus ACl und NdCl₃ sowie die freien Enthalpien für die Synproportionierung aus den im Zustandsdiagramm benachbarten Verbindungen gemessen. Es zeigte sich, daß nur die Verbindungen A₂NdCl₅ bei Normaltemperaturen stabil sind. Alle anderen Verbindungen existieren aufgrund von Entropiegewinnen nur bei höheren Temperaturen. Anhand von Röntgen-Pulveraufnahmen wurden die Kristallstrukturen ermittelt. Die Verbindungen sind isotyp zu den entsprechenden Doppelchloriden des Lanthans und Cers (A₃NdCl₆: Hochtemperaturmodifikationen = Elpasolith-Typ; bei Normaltemperatur metastabil im K₃MoCl₆-Typ; A₂NdCl₅=K₂PrCl₅-Typ; ANd₂Cl₇=-KEr₂F₇-Typ; Na₃Nd₅Cl₁₈=Na₃La₅Cl₁₈-Typ). Mit einer Gouy-Waage wurden die magnetischen Suszeptibilitäten im Temperaturbereich 80–300 K gemessen.

---

ACl/NdCl₃, =NaCs. , : Na₃Nd₅Cl₁₈, K₃NdCl₆, K₂NdCl₅, KNd₂Cl₇, Rb₃NdCl₆, Rb₂NdCl₅, RbNd₂Cl₇, Cs₃NdCl₆, Cs₂NdCl₅, CsNd₂Cl₇. , . , A₂NdCl₅. . . , . A₃NdCl₆ , — K₃l₆. A₂NdCl₅ — K₂rl₅, ANd₂Cl₇ — -KEr₂F₇, Na₃Nd₅Cl₁₈- Na₃La₅Cl₁₈. 80–300 .

---

---

This work was supported by the Deutsche Forschungsgemeinschaft and the Fonds der Chemischen Industrie.     

Thiolactame als Reagenzien in der quantitativen Analyse. IX

Zusammenfassung Thiocaprolactam (T) eignet sich zur Goldbestimmung im Konzentrationsbereich 10 bis 130 g Au/ml mit einem Fehler von ±0,5g. Thiocaprolactam bildet mit [AuCl₄]^– eine Verbindung im molaren Verhältnis TAuCl=112, mit [AuJ₄]^– im molaren Verhältnis TAuJ=213. Dagegen bilden sich im System T:Au:Br zwei verschiedene Verbindungen: Ein Bromidkomplex mit höherem Goldgehalt TAu=12, der mit Chloroform extrahierbar ist, und eine sich als Niederschlag ausscheidende Verbindung mit dem Verhältnis TAuBr=112.

---

Thiolactams as reagents in quantitative analysis. IX

Summary Thiocaprolactam (T) is suitable for the determination of gold in the concentration range 10–130g Au/ml with an error of ±0.5g. Thiocaprolactam yields with [AuCl₄]^– a compound in the molar ratio TAuCl=112, with [Aul₄]^– in the molar ratio TAuI=213. On the other hand various compounds result in the system TAu Br. The molar ratio in the case of the bromide complex has a higher gold content, namely TAu=12; this product is extractable with chloroform and a compound that comes down as a precipitate shows the ratioT Au Br=112.

---

---

Herrn Dr.K. Czerepko möchte ich hiermit meinen Dank für die Diskussion der Ergebnisse aussprechen.     

Spektrophotometrische Bestimmung von Nickel und Kobalt nebeneinander mit N,N'-Bis-(o-aminobenzyliden)-?thylendiamin

Zusammenfassung N,N'-Bis-(o-ammobenzyliden)-äthylendiamin (ABAD) bildet mit Ni²⁺ und Co³⁺ stabile Chelate, wobei schon durch Luftsauerstoff eine Oxydation von Co^IIzu Co^III-ABAD erfolgt. Ni-ABAD kann quantitativ mit Benzol extrahiert und spektrophotometrisch bei 486 nm bestimmt werden. Co^III-ABAD wird in der wäßrigen Schicht bei 430 nm bestimmt. Die Grenzkonzentrationen betragen 0,5 g Ni/ml und 0,6 g Co/ml in Konzentrationsverhältnissen von 1001 bis 1100. Die Methode ist ebenfalls zur quantitativen Bestimmung von Co neben Cu geeignet.

---

Summary N,N'-Bis-(o-aminobenzylidene)-ethylenediamine (ABAD) quantitatively reacts with Ni²⁺ and Co³⁺ to form stable chelates. Co^II-ABAD is easily oxidised by air to Co^III-ABAD. Ni-ABAD can be extracted with benzene and determined spectrophotometrically at 486 nm, Co^III-ABAD is determined in the water-layer at 430 nm. The limit of detection is 0.5 g Ni/ml and 0.6 g Co/ml by the ratio from 1001 to 1100. The method is also suitable for separation and determination of Co in the presence of Cu.

     

Simultaneous determination of iron(III) and cobalt(II) withN-phenylcinnamohydroxamic acid and thiocyanate by extraction and spectrophotometry

Simple, precise, sensitive, and highly selective methods for the separate determination of iron(III) and cobalt(II) and for the simultaneous determination of both metal ions are described. Iron(III) and cobalt(II) react with thiocyanate in the presence ofN-phenylcinnamohydroxamic acid (PCHA) to form pinkish red and blue coloured complexes, respectively. Both the iron(III) and cobalt(II) complexes having stoichiometric composition of 122 (FeSCN^–PCHA) and 14 (CoSCN^–), respectively, are quantitatively extractable into ethylacetate from 0.5–1.5 M hydrochloric acid solutions. The spectra of iron(III) and cobalt(II) complexes in the visible region exhibit absorption maxima at 495 and 625 nm, respectively. The coloured systems obey Beer's law in the concentration range of 0.2–4.0g/ml of iron and 2–40g/ml of cobalt. The effects of foreign ions and of various experimental parameters were studied to establish the optimum conditions for the extraction and determination of iron and cobalt. The methods have been applied successfully to the analysis of blood, vitamin B₁₂, and standard steels for iron and cobalt.     

Solid state reactions between nickel(II) sulphide and oxides of manganese and iron

Thermogravimetry and differential thermal analysis have shown that, when nickel(II) sulphide and manganese or iron oxides are heated together, several reactions occur depending on the molar ratio of the reactants. Detailed examinations of these reactions have shown that there are a number of intermediate stages, including the formation of sulphates.

---

Zusammenfassung Thermogravimetrie und Differentialthermoanalyse zeigen, daß bei gemeinsamer Erhitzen von Nickel(II)-Sulfid und Manganoder Eisenoxiden, in Abhängigkeit von dem Molarverhältnis der Reaktionspartner verschiedene Reaktionen stattfinden. Das eingehende Studium dieser Reaktionen zeigte das Auftreten einer Anzahl Zwischenstufen, darunter auch die Bildung von Sulfaten.

---

Résumé On montre par thermogravimétrie et analyse thermique différentielle que plusieurs réactions peuvent se produire suivant les rapports molaires des constituants lorsque l'on chauffe du sulfure de nickel(II) avec des oxydes de manganèse ou de fer. L'étude détaillée de ces réactions a mis en évidence un certain nombre d'étapes intermédiaires, avec formation de sulfates.

---

, (II) , . , , .

     

Di- and tri-nuclear osmium carbonyl chloride complexes: x-ray structures of Os2(CO)8Cl2 and Os3(CO)12Cl2

Summary Os₂(CO)₈Cl₂ (1) is orthorhombic P2₁2₁2₁ witha=9.3599(9),b=9.879(2),c=16.014(3), V=1480³, D_c=3.03 Mgm^–3 for Z=4. Structure solved by Patterson methods. Final R=0.038, R_w=0.038 [w=(²F)] for 1270 observed reflections and 141 parameters. Os₃(CO)₁₂Cl₂ (2) is monoclinic C2/m witha=12.105(3), b=10.612(3),c=8.798(1) , =117.02(2)°, V=1006³, D_c=3.22 Mgm^–3 for Z=2. Structure solved by Patterson methods. Final R=0.036, R_w=0.037 (w=(²F)^–) for 821 observed reflections and 75 parameters.Complex(1) has an osmium-osmium single bond 2.897(1), with the chloride ligands in equatorial positions,(2) has a linear triosmium chain with osmium-osmium single bonds 2.893(1) and the chloride ligands occupy equatorial sites on the terminal osmium atoms. Both(1) and(2) are isostructural with their osmium carbonyl iodide analogues.     

Synthesis,Structure, and Magnetic Properties of the Silicides <Emphasis Type="BoldItalic">RE</Emphasis>IrSi (<Emphasis Type="Italic">RE</Emphasis> = Ce,Pr, Er,Tm, Lu) and SmIr<Subscript>0.266(8)</Subscript>Si<Subscript>1.734(8)</Subscript>

Summary. The equiatomic rare earth metal–iridium–silicides REIrSi (RE=Ce, Pr, Er, Tm, Lu) were prepared by arc-melting of the elements and subsequent annealing. All silicides were characterized through their X-ray powder patterns. The structures of CeIrSi, ErIrSi, and LuIrSi were refined from X-ray single crystal diffractometer data: LaIrSi type, P2₁3, a=629.15(2)pm, wR2=0.1232, 280F² values, and 11 variable parameters for CeIrSi; TiNiSi type, Pnma, a=673.4(1), b=416.07(5), c=744.88(9)pm, wR2=0.0705, 339F² values, and 20 variable parameters for ErIrSi, and a=664.0(3), b=412.9(1), c=742.6(1)pm, wR2=0.0398, 496F² values, and 20 variable parameters for LuIrSi. The iridium and silicon atoms in CeIrSi, ErIrSi, and LuIrSi build three-dimensional [IrSi] networks where the iridium atoms have three (CeIrSi, Ir–Si 229pm) and four (ErIrSi, Ir–Si 247–258pm; LuIrSi, Ir–Si 245–256pm) silicon neighbors. The [IrSi] networks leave larger channels in which the cerium, erbium, and lutetium atoms are located. Temperature dependent susceptibility data for LuIrSi indicate Pauli paramagnetism. CeIrSi shows Curie-Weiss paramagnetism above 100K with an experimental magnetic moment of 2.56(2)_B/Ce atom. With samarium as rare earth metal component the silicide SmIr_0.266(8)Si_1.734(8) with -ThSi₂ type structure was obtained: I4₁/amd, a=409.3(1), c=1397.2(5)pm, wR2=0.0575, 161F² values, and 9 variable parameters. Within the three-dimensional [Ir_0.266Si_1.734] network the Ir/Si–Ir/Si distances range from 230 to 237pm.     

The synthesis and structure of the [2.2]paracyclophane cluster Ru6C(CO)13(μ 3-η 2:η 2:η 2-C16H16)(PPh3) and a study of the 1H-n.m.r. spectra of [2.2]paracyclophane and benzene clusters

Summary The [2.2]paracyclophane cluster, Ru₆C(CO)₁₄( ₃- ^{2 2 2}-C₁₆H₁₆) (1), undergoes reaction with Me₃NO and triphenylphosphine to yield Ru₆C(CO)₁₃( ₃- ^{2 2 2}-C₁₆H₁₆)(PPh₃) (2), which may also be produced from (1) by thermolysis with PPh₃ in THF. Compound (2) has been fully characterized in solution by spectroscopy and in the solid state by a single crystal X-ray diffraction analysis at 277 K, and its structure is compared with that of the parent cluster, (1). Using the same synthetic procedures, the tricyclohexylphosphine analogue, Ru₆C(CO)₁₃( ₃- ^{2 2 2}-C₁₆H₁₆)(PCy₃) (3), has also been prepared and characterized spectroscopically. A comparison of the chemical shifts of the 577-01 protons in the ¹H-n.m.r. spectra of compounds (1)–(3) together with a variety of other [2.2]paracyclophane and benzene clusters has been made.     

Spectrophotometric determination of Fe(III) with tiron in the presence of cationic surfactant and its application for the determination of iron in Al-alloys and Cu-based alloys

A sensitive Spectrophotometric method for the determination of iron with tiron and a cationic surfactant, cetylpyridinium chloride, at pH 5.6 is reported. The complex is extracted into a chloroform-propan-2-ol (41) mixture and shows maximum absorbance at 520 nm. Beer's law is obeyed in the range 1–14 g/ml with an average molar absorptivity of 15800 l mol^–1 cm^–1. The molar ratio as determined by Job's method for Fe:tiron:CPC is 143. Interferences by various ions are examined. Zr, Ti and Mo interfere heavily. The method is applied for the determination of iron in Al-based and Cu-based alloys, using appropriate masking agents.     

Hydrogen peroxide yields in methanol-water mixtures gamma-irradiated at room temperature and 77 K

Hydrogen peroxide yields in air-saturated methanol-water mixtures with methanol: water volume ratios varying from 199 to 1000, produced by⁶⁰Co gamma-irradiation boith at room temperature and at 77 K have been determined. At room temperature, G(H₂O₂) values are almost constant over the entire range of methanol: water ratios. However, for irradiations at 77 K, G(H₂O₂) values increase with increasing methanol concentration up to the volume ratio of 982.     

Copper(II)-disulphide interaction: a spectroscopic and electrochemical study of the interaction of copper(II) with an imidazole-containing disulphide

Summary The interaction of copper(II) salts with the imidazole-containing disulphide 5-(1,2,5-dithiazaepan-5-ylmethylene)-4-methyl-2-ethyl imidazole (MAMI) in MeOH have been investigated. The 11 Cu(ClO₄)₂MAMI system exhibited a single ligand field band at ca. 12200cm^-1, an intense shoulder at ca. 31500 cm^-1 and a less intense split feature at 24400 and 25300cm^-1 assignable to S() Cu^II and S() Cu^II charge transfer (CT) transitions, respectively. The e.p.r. parameters suggested the presence of a CuN₂SO chromophore, however; the 11 Cu(NO₃)₂MAMI system did not exhibit a S Cu^II CT band and the g value was comparatively high. An electrochemical study of the 11 Cu(ClO₄)₂MAMI system in MeOH revealed that the copper-disulphide interaction, though weaker, would confer a high redox potential as well as reversibility, similar to the copper-thioether interaction.     

4(5)-D-Arabinotetrahydroxybutylimidazoline-2-thione (THBIT), a new reagent for the spectrophotometric determination of palladium

Summary 4(5)-D-Arabinotetrahydroxybutylimidazoline-2-thione, THBIT, is proposed as a new reagent for the spectrophotometric determination of Pd(II). Pd(II) forms 11, 12 and 14 complexes with THBIT. The system conforms to Beer's law up to 5g/ml palladium concentration in aqueous medium (molar absorptivity, 1.99×10⁴ l· mole^–1·cm^–1 at 338 nm). The most serious interference is from Hg(II), Os(VIII), Ru(IV), Cr(VI), V(V) and S₂O₃ ^2–. The method has been used successfully for the determination of palladium in catalysts and synthetic samples.     

Composition of 2-(3,5-dibromo-2-pyridylazo) diethylaminophenol chelates by liquid chromatography

Summary The composition of 3,5-diBr-PADAP metal chelates was determined by liquid chromatography employing appropriate eluents and non-polar bonded stationary phase. The metal-to-ligand ratios were 12, 12 and 12 for Cu(II), Co(III) and Cr(III) respectively, and the V(V)-to-ligand ratio found to be 111 in V(V)-3,5-diBr-PADAP-H₂O₂ in the presence of H₂O₂. The results are in agreement with literature data.     

Extraktion des Rheniums als Tributylammoniumperrhenat

Zusammenfassung Durch Extraktion des Rheniums mit Methylenchlorid als [(C₄H₉)₃NH]ReO₄ im pH-Bereich 1–6 können Trennungen Re: Übergangsmetall= 110⁴ und Re^VIIMo^VI=160 erzielt werden. Durch Überführung des Rheniums in nichtwäßriger Phase in [(C₄H₉)₃NH]₃[ReO₂(SCN)₄] sind hierbei Rheniummengen ab 1,5 g bei 430 nm photometrisch bestimmbar.

---

Summary Liquid-liquid extraction of rhenium as [(C₄H₉)₃NH]ReO₄ using dichloromethane within a pH-range of 1–6 enables separations Re: transition metal= 110⁴ (Re^VIIMo^VI=160). Photometric measurement (430 nm) of rhenium in non-aqueous solutions as [(C₄H₉)₃NH]₃[ReO₂(SCN)₄] allows the determination of 1.5 g of rhenium.

     

Ternary complexes of N-(2-acetamido)iminodiacetic acid and some aromatic acids. Isolation and stability constants in solution

Summary Ternary 1:1:1 complexes of Y^III, Co^II, Ni^II, Cu^II, La^III, Ce^III and UO ₂ ²⁺ with N-(2-acetamido)iminodiacetic acid (H₂ADA) as primary ligand and salicylic, anthranilic or phthalic acid as secondary ligand are described. The complexes of Co^II and Cu^II were isolated and characterized by microanalysis, molar conductance measurements, thermal analysis, i.r. and u.v.-vis. spectra. The formation constants of the 111 ternary complexes were determined potentiometrically in 20% (w/w) EtOH-H₂O at 24 °C. The stabilities of the 111 M ⁿ⁺ :ADA^2–:aromatic acid ternary complexes are higher than those of the corresponding 11 M ⁿ⁺ :aromatic acid binary complexes.