Coupling methods between finite element–based Boussinesq‐type wave and particle‐based free‐surface flow models

We develop one‐way coupling methods between a Boussinesq‐type wave model based on the discontinuous Galerkin finite element method and a free‐surface flow model based on a mesh‐free particle method to strike a balance between accuracy and computational cost. In our proposed model, computation of the wave model in the global domain is conducted first, and the nonconstant velocity profiles in the vertical direction are reproduced by using its results. Computation of the free‐surface flow is performed in a local domain included within the global domain with interface boundaries that move along the reproduced velocity field in a Lagrangian fashion. To represent the moving interfaces, we used a polygon wall boundary model for mesh‐free particle methods. Verification and validation tests of our proposed model are performed, and results obtained by the model are compared with theoretical values and experimental results to show its accuracy and applicability.     

Non‐hydrostatic 3D free surface layer‐structured finite volume model for short wave propagation

In this paper a layer‐structured finite volume model for non‐hydrostatic 3D environmental free surface flow is presented and applied to several test cases, which involve the computation of gravity waves. The 3D unsteady momentum and mass conservation equations are solved in a collocated grid made of polyhedrons, which are built from a 2D horizontal unstructured mesh, by just adding several horizontal layers. The mesh built in such a way is unstructured in the horizontal plane, but structured in the vertical direction. This procedure simplifies the mesh generation and at the same time it produces a well‐oriented mesh for stratified flows, which are common in environmental problems. The model reduces to a 2D depth‐averaged shallow water model when one single layer is defined in the mesh. Pressure–velocity coupling is achieved by the Semi‐Implicit Method for Pressure‐Linked Equations algorithm, using Rhie–Chow interpolation to stabilize the pressure field. An attractive property of the model proposed is the ability to compute the propagation of short waves with a rather coarse vertical discretization. Several test cases are solved in order to show the capabilities and numerical stability of the model, including a rectangular free oscillating basin, a radially symmetric wave, short wave propagation over a 1D bar, solitary wave runup on a vertical wall, and short wave refraction over a 2D shoal. In all the cases the numerical results are compared either with analytical or with experimental data. Copyright © 2008 John Wiley & Sons, Ltd.     

Computation of turbulent free‐surface flows around modern ships

This paper presents the calculated results for three classes of typical modern ships in modelling of ship‐generated waves. Simulations of turbulent free‐surface flows around ships are performed in a numerical water tank, based on the FINFLO‐RANS SHIP solver developed at Helsinki University of Technology. The Reynolds‐averaged Navier–Stokes (RANS) equations with the artificial compressibility and the non‐linear free‐surface boundary conditions are discretized by means of a cell‐centred finite‐volume scheme. The convergence performance is improved with the multigrid method. A free surface is tracked using a moving mesh technology, in which the non‐linear free‐surface boundary conditions are given on the actual location of the free surface. Test cases recommended are a container ship, a US Navy combatant and a tanker. The calculated results are compared with the experimental data available in the literature in terms of the wave profiles, wave pattern, and turbulent flow fields for two turbulence models, Chien's low Reynolds number k–εmodel and Baldwin–Lomax's model. Furthermore, the convergence performance, the grid refinement study and the effect of turbulence models on the waves have been investigated. Additionally, comparison of two types of the dynamic free‐surface boundary conditions is made. Copyright © 2003 John Wiley& Sons, Ltd.     

Computation of free‐surface flows with local mesh adaptation

This paper describes a modern free‐surface capturing strategy implemented in an unstructured finite‐volume viscous flow solver that can handle moving grids composed of arbitrary‐shaped control volumes. An adaptive mesh strategy is fully integrated in the code making it a single tool for dynamically maintaining a prescribed density of grid points around the steady or unsteady interface between air and water. The whole adaptive procedure is described in detail. The efficiency of the overall approach is examined on two‐ and three‐dimensional hydrodynamic applications. The adaptive strategy achieves interesting gains in terms of computational and human efforts compared to single‐mesh computations. Copyright © 2005 John Wiley & Sons, Ltd.     

Interface‐fitted moving mesh method for axisymmetric two‐phase flow in microchannels

A boundary‐fitted moving mesh scheme is presented for the simulation of two‐phase flow in two‐dimensional and axisymmetric geometries. The incompressible Navier‐Stokes equations are solved using the finite element method, and the mini element is used to satisfy the inf‐sup condition. The interface between the phases is represented explicitly by an interface adapted mesh, thus allowing a sharp transition of the fluid properties. Surface tension is modelled as a volume force and is discretized in a consistent manner, thus allowing to obtain exact equilibrium (up to rounding errors) with the pressure gradient. This is demonstrated for a spherical droplet moving in a constant flow field. The curvature of the interface, required for the surface tension term, is efficiently computed with simple but very accurate geometric formulas. An adaptive moving mesh technique, where smoothing mesh velocities and remeshing are used to preserve the mesh quality, is developed and presented. Mesh refinement strategies, allowing tailoring of the refinement of the computational mesh, are also discussed. Accuracy and robustness of the present method are demonstrated on several validation test cases. The method is developed with the prospect of being applied to microfluidic flows and the simulation of microchannel evaporators used for electronics cooling. Therefore, the simulation results for the flow of a bubble in a microchannel are presented and compared to experimental data.     

An implicit numerical algorithm for solving non‐hydrostatic free‐surface flow problems

Details are given of the development of a two‐dimensional vertical numerical model for simulating unsteady free‐surface flows, using a non‐hydrostatic pressure distribution. In this model, the Reynolds equations and the kinematic free‐surface boundary condition are solved simultaneously, so that the water surface elevation can be integrated into the solution and solved for, together with the velocity and pressure fields. An efficient numerical algorithm has been developed, deploying implicit parameters similar to those used in the Crank–Nicholson method, and generating a block tri‐diagonal algebraic system of equations. The model has been applied to simulate a range of unsteady flow problems involving relatively strong vertical accelerations. The results show that the numerical algorithm described is able to produce accurate predictions and is also easy to apply. Copyright © 2001 John Wiley & Sons, Ltd.     

Numerical simulation of viscous flows with free surface around realistic hull forms with transom

This paper describes a method for simulation of viscous flows with a free surface around realistic hull forms with a transom, which has been developed based on a FINFLO RANS solver with a moving mesh. A dry‐transom model is proposed and implemented for the treatment of flows off the transom. The bulk RANS flow with the artificial compressibility is solved by a cell‐centred finite volume multigrid scheme and the free surface deformed by wave motions is tracked by satisfying the kinematic and dynamic free‐surface boundary conditions on the actual location of the surface. The effects of turbulence on flows are evaluated with the Baldwin–Lomax turbulence model without a wall function. A test case is modern container ship model with a transom, the Hamburg Test Case. The calculated results are validated and they agree well with the measured results in terms of the free‐surface waves and the total resistance coefficient. Furthermore, the numerical solutions successfully captured many important features of the complicated interaction of the free surface with viscous flows around transom stern ships. In addition, the convergence performance and the grid refinement studies are also investigated. Copyright © 2001 John Wiley & Sons, Ltd.     

A local domain‐free discretization method for simulation of incompressible flows over moving bodies

This paper presents a local domain‐free discretization (DFD) method for the simulation of unsteady flows over moving bodies governed by the incompressible Navier–Stokes equations. The discretization strategy of DFD is that the discrete form of partial differential equations at an interior point may involve some points outside the solution domain. All the mesh points are classified as interior points, exterior dependent points and exterior independent points. The functional values at the exterior dependent points are updated at each time step by the approximate form of solution near the boundary. When the body is moving, only the status of points is changed and the mesh can stay fixed. The issue of ‘freshly cleared nodes/cells’ encountered in usual sharp interface methods does not pose any particular difficulty in the presented method. The Galerkin finite‐element approximation is used for spatial discretization, and the discrete equations are integrated in time via a dual‐time‐stepping scheme based on artificial compressibility. In order to validate the present method for moving‐boundary flow problems, two groups of flow phenomena have been simulated: (1) flows over a fixed circular cylinder, a harmonic in‐line oscillating cylinder in fluid at rest and a transversely oscillating cylinder in uniform flow; (2) flows over a pure pitching airfoil, a heaving–pitching airfoil and a deforming airfoil. The predictions show good agreement with the published numerical results or experimental data. Copyright © 2010 John Wiley & Sons, Ltd.     

A POD reduced‐order 4D‐Var adaptive mesh ocean modelling approach

Inflow and outflow boundary conditions are essential for the application of computational fluid dynamics to many engineering scenarios. In this paper we present a new boundary condition implementation that enables the simulation of flow through permeable boundaries in the Lagrangian mesh‐free method, smoothed particle hydrodynamics (SPH). Each permeable boundary is associated with an inflow or outflow zone outside the domain, in which particles are created or removed as required. The analytic boundary condition is applied by prescribing the appropriate variables for particles in an inflow or outflow zone, and extrapolating other variables from within the domain. Characteristic‐based non‐reflecting boundary conditions, described in the literature for mesh‐based methods, can be implemented within this framework. Results are presented for simple one‐dimensional flows, quasi‐one‐dimensional compressible nozzle flow, and two‐dimensional flow around a cylinder at Reynolds numbers of 40 and 100 and a Mach number of 0.1. These results establish the capability of SPH to model flows through open domains, opening a broad new class of applications. Copyright © 2008 John Wiley & Sons, Ltd.     

A weakly compressible MPS method for modeling of open‐boundary free‐surface flow

A mesh‐free particle method, based on the moving particle semi‐implicit (MPS) interaction model, has been developed for the simulation of two‐dimensional open‐boundary free‐surface flows. The incompressibility model in the original MPS has been replaced with a weakly incompressible model. The effect of this replacement on the efficiency and accuracy of the model has been investigated. The new inflow–outflow boundary conditions along with the particle recycling strategy proposed in this study extend the application of the model to open‐boundary problems. The final model is able to simulate open‐boundary free surface flow in cases of large deformation and fragmentation of free surface. The models and proposed algorithms have been validated and applied to sample problems. The results confirm the model's efficiency and accuracy. Copyright © 2009 John Wiley & Sons, Ltd.     

A two‐dimensional vertical non‐hydrostatic σ model with an implicit method for free‐surface flows

An implicit finite difference model in the σ co‐ordinate system is developed for non‐hydrostatic, two‐dimensional vertical plane free‐surface flows. To accurately simulate interaction of free‐surface flows with uneven bottoms, the unsteady Navier–Stokes equations and the free‐surface boundary condition are solved simultaneously in a regular transformed σ domain using a fully implicit method in two steps. First, the vertical velocity and pressure are expressed as functions of horizontal velocity. Second, substituting these relationship into the horizontal momentum equation provides a block tri‐diagonal matrix system with the unknown of horizontal velocity, which can be solved by a direct matrix solver without iteration. A new treatment of non‐hydrostatic pressure condition at the top‐layer cell is developed and found to be important for resolving the phase of wave propagation. Additional terms introduced by the σ co‐ordinate transformation are discretized appropriately in order to obtain accurate and stable numerical results. The developed model has been validated by several tests involving free‐surface flows with strong vertical accelerations and non‐linear waves interacting with uneven bottoms. Comparisons among numerical results, analytical solutions and experimental data show the capability of the model to simulate free‐surface flow problems. Copyright © 2004 John Wiley & Sons, Ltd.     

Solution of incompressible flows with or without a free surface using the finite volume method on unstructured triangular meshes

An incompressible Navier–Stokes solver based on a cell‐centre finite volume formulation for unstructured triangular meshes is developed and tested. The solution methodology makes use of pseudocompressibility, whereby the convective terms are computed using a Godunov‐type second‐order upwind finite volume formulation. The evolution of the solution in time is obtained by subiterating the equations in pseudotime for each physical time step, with the pseudotime step set equal to infinity. For flows with a free surface the computational mesh is fitted to the free surface boundary at each time step, with the free surface elevation satisfying a kinematic boundary condition. A ‘leakage coefficient’, ε, is introduced for the calculation of flows with a free surface in order to control the leakage of flow through the free surface. This allows the assumption of stationarity of mesh points to be made during the course of pseudotime iteration. The solver is tested by comparing the output with a wide range of documented published results, both for flows with and without a free surface. The presented results show that the solver is robust. © 1999 John Wiley & Sons, Ltd.     

On the usage of NURBS as interface representation in free‐surface flows

When simulating free‐surface flows using the finite element method, there are many cases where the governing equations require information which must be derived from the available discretized geometry. Examples are curvature or normal vectors. The accurate computation of this information directly from the finite element mesh often requires a high degree of refinement—which is not necessarily required to obtain an accurate flow solution. As a remedy and an option to be able to use coarser meshes, the representation of the free surface using non‐uniform rational B‐splines (NURBS) curves or surfaces is investigated in this work. The advantages of a NURBS parameterization in comparison with the standard approach are discussed. In addition, it is explored how the pressure jump resulting from surface tension effects can be handled using doubled interface nodes. Numerical examples include the computation of surface tension in a two‐phase flow as well as the computation of normal vectors as a basis for mesh deformation methods. For these examples, the improvement of the numerical solution compared with the standard approaches on identical meshes is shown. Copyright © 2011 John Wiley & Sons, Ltd.     

A lattice Boltzmann method for viscous free surface waves in two dimensions

We propose a new method based on the combination of the lattice Boltzmann equation (LBE) and the kinematic boundary condition (KBC) method to simulate viscous free surface wave in two dimensions. In our method, the flow field is modeled by LBE, whereas the free surface is explicitly tracked by the local height function, which is calculated by the KBC method. The free surface boundary condition (FSBC) for LBE is revised from previous researches. Interpolation‐supplemented lattice Boltzmann (ISLB) method is introduced, which enables our approach to be applied on arbitrary, nonuniform mesh grids. Five cases are simulated respectively to validate the LBE–KBC method: the stationary flow and the solitary waves simulated by the revised‐FSBC are more accurate than the one obtained by the former‐FSBC; numerical results of standing waves show that our method is compatible to the existing two‐dimensional finite‐volume scheme; cases of small amplitude Stokes wave and waves traveling over a submerged bar show good agreement on wave celerity, wavelength, wave amplitude and wave period between numerical results and corresponding analytical solutions and/or experiment data.Copyright © 2012 John Wiley & Sons, Ltd.     

Fully non‐linear free‐surface simulations by a 3D viscous numerical wave tank

A finite difference scheme using a modified marker‐and‐cell (MAC) method is applied to investigate the characteristics of non‐linear wave motions and their interactions with a stationary three‐dimensional body inside a numerical wave tank (NWT). The Navier–Stokes (NS) equation is solved for two fluid layers, and the boundary values are updated at each time step by a finite difference time marching scheme in the frame of a rectangular co‐ordinate system. The viscous stresses and surface tension are neglected in the dynamic free‐surface condition, and the fully non‐linear kinematic free‐surface condition is satisfied by the density function method developed for two fluid layers. The incident waves are generated from the inflow boundary by prescribing a velocity profile resembling flexible flap wavemaker motions, and the outgoing waves are numerically dissipated inside an artificial damping zone located at the end of the tank. The present NS–MAC NWT simulations for a vertical truncated circular cylinder inside a rectangular wave tank are compared with the experimental results of Mercier and Niedzwecki, an independently developed potential‐based fully non‐linear NWT, and the second‐order diffraction computation. Copyright © 1999 John Wiley & Sons, Ltd.     

A semi‐implicit finite difference method for non‐hydrostatic,free‐surface flows

In this paper a semi‐implicit finite difference model for non‐hydrostatic, free‐surface flows is analyzed and discussed. It is shown that the present algorithm is generally more accurate than recently developed models for quasi‐hydrostatic flows. The governing equations are the free‐surface Navier–Stokes equations defined on a general, irregular domain of arbitrary scale. The momentum equations, the incompressibility condition and the equation for the free‐surface are integrated by a semi‐implicit algorithm in such a fashion that the resulting numerical solution is mass conservative and unconditionally stable with respect to the gravity wave speed, wind stress, vertical viscosity and bottom friction. Copyright © 1999 John Wiley & Sons, Ltd.     

Numerical solution of steady free‐surface flows by the adjoint optimal shape design method

Numerical solution of flows that are partially bounded by a freely moving boundary is of great importance in practical applications such as ship hydrodynamics. Free‐boundary problems can be reformulated into optimal shape design problems, which can in principle be solved efficiently by the adjoint method. In this work we investigate the suitability of the adjoint shape optimization method for solving steady free‐surface flows. The asymptotic convergence behaviour of the method is determined for free‐surface flows in 2D and 3D. It is shown that the convergence behaviour depends sensitively on the occurrence of critical modes. The convergence behaviour is moreover shown to be mesh‐width independent, provided that proper preconditioning is applied. Numerical results are presented for 2D flow over an obstacle in a channel. The observed convergence behaviour is indeed mesh‐width independent and conform the derived asymptotic estimates. Copyright © 2003 John Wiley & Sons, Ltd.     

Parallel implementation of a non‐hydrostatic model for free surface flows with semi‐Lagrangian advection treatment

The parallel implementation of an unstructured‐grid, three‐dimensional, semi‐implicit finite difference and finite volume model for the free surface Navier–Stokes equations (UnTRIM ) is presented and discussed. The new developments are aimed to make the code available for high‐performance computing in order to address larger, complex problems in environmental free surface flows. The parallelization is based on the mesh partitioning method and message passing and has been achieved without negatively affecting any of the advantageous properties of the serial code, such as its robustness, accuracy and efficiency. The key issue is a new, autonomous parallel streamline backtracking algorithm, which allows using semi‐Lagrangian methods in decomposed meshes without compromising the scalability of the code. The implementation has been carefully verified not only with simple, abstract test cases illustrating the application domain of the code but also with advanced, high‐resolution models presently applied for research and engineering projects. The scheme performance and accuracy aspects are researched and discussed. Copyright © 2008 John Wiley & Sons, Ltd.     

Calculation of compressible flows about complex moving geometries using a three‐dimensional Cartesian cut cell method

A three‐dimensional Cartesian cut cell method is described for modelling compressible flows around complex geometries, which may be either static or in relative motion. A background Cartesian mesh is generated and any solid bodies cut out of it. Accurate representation of the geometry is achieved by employing different types of cut cell. A modified finite volume solver is used to deal with boundaries that are moving with respect to the stationary background mesh. The current flow solver is an unsplit MUSCL–Hancock method of the Godunov type, which is implemented in conjunction with a cell‐merging technique to maintain numerical stability in the presence of arbitrarily small cut cells and to retain strict conservation at moving boundaries. The method is applied to some steady and unsteady compressible flows involving both static and moving bodies in three dimensions. Copyright © 2000 John Wiley & Sons, Ltd.