Stabilization of the Charge‐Separated States of Covalently Linked Zinc Porphyrin–Triphenylamine–[60]Fullerene

Spectroscopic, redox, computational, and electron transfer reactions of the covalently linked zinc porphyrin–triphenylamine–fulleropyrrolidine system are investigated in solvents of varying polarity. An appreciable interaction between triphenylamine and the porphyrin π system is revealed by steady‐state absorption and emission, redox, and computational studies. Free‐energy calculations suggest that the light‐induced processes via the singlet‐excited porphyrin are exothermic in benzonitrile, dichlorobenzene, toluene, and benzene. The occurrence of fast and efficient charge‐separation processes (≈10¹² s^?1) via the singlet‐excited porphyrin is confirmed by femtosecond transient absorption measurements in solvents with dielectric constants ranging from 25.2 (benzonitrile) to 2.2 (benzene). The rates of the charge separation processes are much less solvent‐dependent, which suggests that the charge‐separation processes occur at the top region of the Marcus parabola. The lifetimes of the singlet radical‐ion pair (70–3000 ps at room temperature) decrease substantially in more polar solvents, which suggests that the charge‐recombination process is occurring in the Marcus inverted region. Interestingly, by utilizing the nanosecond transient absorption spectral technique we can obtain clear evidence about the existence of triplet radical‐ion pairs with relatively long lifetimes of 0.71 μs (in benzonitrile) and 2.2 μs (in o‐dichlorobenzene), but not in toluene and benzene due to energetic considerations. From the point of view of mechanistic information, the synthesized zinc porphyrin–triphenylamine–fulleropyrrolidine system has the advantage that both the lifetimes of the singlet and triplet radical‐ion pair can be determined.     

Supramolecular Tetrad Featuring Covalently Linked Bis(porphyrin)–Phthalocyanine Coordinated to Fullerene: Construction and Photochemical Studies

A multimodular donor–acceptor tetrad featuring a bis(zinc porphyrin)–(zinc phthalocyanine) ((ZnP–ZnP)–ZnPc) triad and bis‐pyridine‐functionalized fullerene was assembled by a “two‐point” binding strategy, and investigated as a charge‐separating photosynthetic antenna‐reaction center mimic. The spectral and computational studies suggested that the mode of binding of the bis‐pyridine‐functionalized fullerene involves either one of the zinc porphyrin and zinc phthalocyanine (Pc) entities of the triad or both zinc porphyrin entities leaving ZnPc unbound. The binding constant evaluated by constructing a Benesi–Hildebrand plot by using the optical data was found to be 1.17×10⁵ M ^?1, whereas a plot of “mole‐ratio” method revealed a 1:1 stoichiometry for the supramolecular tetrad. The mode of binding was further supported by differential pulse voltammetry studies, in which redox modulation of both zinc porphyrin and zinc phthalocyanine entities was observed. The geometry of the tetrad was deduced by B3LYP/6‐31G* optimization, whereas the energy levels for different photochemical events was established by using data from the optical absorption and emission, and electrochemical studies. Excitation of the zinc porphyrin entity of the triad and tetrad revealed ultrafast singlet–singlet energy transfer to the appended zinc phthalocyanine. The estimated rate of energy transfer (k_ENT) in the case of the triad was found to be 7.5×10¹¹ s^?1 in toluene and 6.3×10¹¹ s^?1 in o‐dichlorobenzene, respectively. As was predicted from the energy levels, photoinduced electron transfer from the energy‐transfer product, that is, singlet‐excited zinc phthalocyanine to fullerene was verified from the femtosecond‐transient spectral studies, both in o‐dichlorobenzene and toluene. Transient bands corresponding to ZnPc ^{? +} in the 850 nm range and C₆₀ ^{? ?} in the 1020 nm range were clearly observed. The rate of charge separation, k_CS, and rate of charge recombination, k_CR, for the (ZnP–ZnP)–ZnPc ^{? +}:Py₂C₆₀ ^{? ?} radical ion pair (from the time profile of 849 nm peak) were found to be 2.20×10¹¹ and 6.10×10⁸ s^?1 in toluene, and 6.82×10¹¹ and 1.20×10⁹ s^?1 in o‐dichlorobenzene, respectively. These results revealed efficient energy transfer followed by charge separation in the newly assembled supramolecular tetrad.     

High‐Potential Perfluorinated Phthalocyanine–Fullerene Dyads for Generation of High‐Energy Charge‐Separated States: Formation and Photoinduced Electron‐Transfer Studies

High oxidation potential perfluorinated zinc phthalocyanines (ZnF_nPcs) are synthesised and their spectroscopic, redox, and light‐induced electron‐transfer properties investigated systematically by forming donor–acceptor dyads through metal–ligand axial coordination of fullerene (C₆₀) derivatives. Absorption and fluorescence spectral studies reveal efficient binding of the pyridine‐ (Py) and phenylimidazole‐functionalised fullerene (C₆₀Im) derivatives to the zinc centre of the F_nPcs. The determined binding constants, K, in o‐dichlorobenzene for the 1:1 complexes are in the order of 10⁴ to 10⁵ M ^?1; nearly an order of magnitude higher than that observed for the dyad formed from zinc phthalocyanine (ZnPc) lacking fluorine substituents. The geometry and electronic structure of the dyads are determined by using the B3LYP/6‐31G* method. The HOMO and LUMO levels are located on the Pc and C₆₀ entities, respectively; this suggests the formation of ZnF_nPc^.+–C₆₀Im^.? and ZnF_nPc^.+–C₆₀Py^.? (n=0, 8 or 16) intra‐supramolecular charge‐separated states during electron transfer. Electrochemical studies on the ZnPc–C₆₀ dyads enable accurate determination of their oxidation and reduction potentials and the energy of the charge‐separated states. The energy of the charge‐separated state for dyads composed of ZnF_nPc is higher than that of normal ZnPc–C₆₀ dyads and reveals their significance in harvesting higher amounts of light energy. Evidence for charge separation in the dyads is secured from femtosecond transient absorption studies in nonpolar toluene. Kinetic evaluation of the cation and anion radical ion peaks reveals ultrafast charge separation and charge recombination in dyads composed of perfluorinated phthalocyanine and fullerene; this implies their significance in solar‐energy harvesting and optoelectronic device building applications.     

Photoinduced Electron Transfer in Zinc Naphthalocyanine–Naphthalenediimide Supramolecular Dyads

Photoinduced electron transfer was studied in self‐assembled donor–acceptor dyads, formed by axial coordination of pyridine appended with naphthalenediimide (NDI) to zinc naphthalocyanine (ZnNc). The NDI‐py:ZnNc ( 1 ) and NDI(CH₂)₂‐py:ZnNc ( 2 ) self‐assembled dyads absorb light over a wide region of the UV/Vis/near infrared (NIR) spectrum. The formation constants of the dyads 1 and 2 in toluene were found to be 2.5×10⁴ and 2.2×10⁴ M ^?1, respectively, from the steady‐state absorption and emission measurements, suggesting moderately stable complex formation. Fluorescence quenching was observed upon the coordination of the pyridine‐appended NDI to ZnNc in toluene. The energy‐level diagram derived from electrochemical and optical data suggests that exergonic charge separation through the singlet state of ZnNc (¹ZnNc*) provides the main quenching pathway. Clear evidence for charge separation from the singlet state of ZnNc to NDI was provided by femtosecond laser photolysis measurements of the characteristic absorption bands of the ZnNc radical cation in the NIR region at 960 nm and the NDI radical anion in the visible region. The rates of charge‐separation of 1 and 2 were found to be 2.2×10¹⁰ and 4.4×10⁹ s^?1, respectively, indicating fast and efficient charge separation (CS). The rates of charge recombination (CR) and the lifetimes of the charge‐separated states were found to be 8.50×10⁸ s^?1 (1.2 ns) for 1 and 1.90×10⁸ s^?1 (5.3 ns) for 2 . These values indicate that the rates of the CS and CR processes decrease as the length of the spacer increases. Their absorption over a wide portion of the solar spectrum and the high ratio of the CS/CR rates suggests that the self‐assembled NDI‐py:ZnNc and NDI(CH₂)₂‐py:ZnNc dyads are useful as photosynthetic models.     

Photosynthetic Antenna‐Reaction Center Mimicry with a Covalently Linked Monostyryl Boron‐Dipyrromethene–Aza‐Boron‐Dipyrromethene–C60 Triad

An efficient functional mimic of the photosynthetic antenna‐reaction center has been designed and synthesized. The model contains a near‐infrared‐absorbing aza‐boron‐dipyrromethene (ADP) that is connected to a monostyryl boron‐dipyrromethene (BDP) by a click reaction and to a fullerene (C₆₀) using the Prato reaction. The intramolecular photoinduced energy and electron‐transfer processes of this triad as well as the corresponding dyads BDP‐ADP and ADP‐C₆₀ have been studied with steady‐state and time‐resolved absorption and fluorescence spectroscopic methods in benzonitrile. Upon excitation, the BDP moiety of the triad is significantly quenched due to energy transfer to the ADP core, which subsequently transfers an electron to the fullerene unit. Cyclic and differential pulse voltammetric studies have revealed the redox states of the components, which allow estimation of the energies of the charge‐separated states. Such calculations show that electron transfer from the singlet excited ADP (¹ADP*) to C₆₀ yielding ADP^.+‐C₆₀^.? is energetically favorable. By using femtosecond laser flash photolysis, concrete evidence has been obtained for the occurrence of energy transfer from ¹BDP* to ADP in the dyad BDP‐ADP and electron transfer from ¹ADP* to C₆₀ in the dyad ADP‐C₆₀. Sequential energy and electron transfer have also been clearly observed in the triad BDP‐ADP‐C₆₀. By monitoring the rise of ADP emission, it has been found that the rate of energy transfer is fast (≈10¹¹ s^?1). The dynamics of electron transfer through ¹ADP* has also been studied by monitoring the formation of C₆₀ radical anion at 1000 nm. A fast charge‐separation process from ¹ADP* to C₆₀ has been detected, which gives the relatively long‐lived BDP‐ADP^.+C₆₀^.? with a lifetime of 1.47 ns. As shown by nanosecond transient absorption measurements, the charge‐separated state decays slowly to populate mainly the triplet state of ADP before returning to the ground state. These findings show that the dyads BDP‐ADP and ADP‐C₆₀, and the triad BDP‐ADP‐C₆₀ are interesting artificial analogues that can mimic the antenna and reaction center of the natural photosynthetic systems.     

Through bond mechanism versus exciplex formation in the photochemistry of fullerene / ferrocene donor-bridge-acceptor dyads

A systematic fluorescence and flash photolytic investigation of a series of covalently linked fullerene / ferrocene based donor-bridge-acceptor dyads is reported as a function of the nature of the bridge between the donor site and acceptor site. The fluorescence of the investigated dyads 2 (Φ_rel = 0.17 × 10^?4, 3 (Φ_rel = 0.78 × 10^?4), 4 (Φ_rel = 1.5 × 10^?4), 5 (Φ_rel = 0.7 × 10^?4), and 6 (Φ_rel = 2.9 × 10^?4) were substantially quenched, relative to N-methyl fulleropyrrolidine (1) (Φ_rel = 6.0 × 10^?4). Photolysis of N-methyl fulleropyrrolidine (1) in toluene revealed formation of the excited singlet state which was followed by a rapid intersystem crossing to the excited triplet state. On the other hand, the fate of the excited singlet state of 2, 3, 4, 5, and 6 was found to be governed by rapid intramolecular quenching, with rate constants of 28×10⁹ s^?1, 6.9×10⁹ s^?1, and 3.4×10⁹ s^?1, 14×10⁹ s^?1, 2.3×10⁹ s^?1 respectively. The electron transfer process and the charge separation were confirmed by monitoring the characteristic π-radical anion bands at λ_max = 400 and 1055 nm in degassed benzonitrile with τ_1/2 = 1.8 μs (3) and 2.5 μs (4).     

Tetrathiafulvalene‐Fused Porphyrins via Quinoxaline Linkers: Symmetric and Asymmetric Donor–Acceptor Systems

A tetrathiafulvalene (TTF) donor is annulated to porphyrins (P) via quinoxaline linkers to form novel symmetric P–TTF–P triads 1 a – c and asymmetric P–TTF dyads 2 a , b in good yields. These planar and extended π‐conjugated molecules absorb light over a wide region of the UV/Vis spectrum as a result of additional charge‐transfer excitations within the donor–acceptor assemblies. Quantum‐chemical calculations elucidate the nature of the electronically excited states. The compounds are electrochemically amphoteric and primarily exhibit low oxidation potentials. Cyclic voltammetric and spectroelectrochemical studies allow differentiation between the TTF and porphyrin sites with respect to the multiple redox processes occurring within these molecular assemblies. Transient absorption measurements give insight into the excited‐state events and deliver corresponding kinetic data. Femtosecond transient absorption spectra in benzonitrile may suggest the occurrence of fast charge separation from TTF to porphyrin in dyads 2 a , b but not in triads 1 a – c . Clear evidence for a photoinduced and relatively long lived charge‐separated state (385 ps lifetime) is obtained for a supramolecular coordination compound built from the ZnP–TTF dyad and a pyridine‐functionalized C₆₀ acceptor unit. This specific excited state results in a (ZnP–TTF)^?+ ??? (C₆₀py)^?? state. The binding constant of Zn^II ??? py is evaluated by constructing a Benesi–Hildebrand plot based on fluorescence data. This plot yields a binding constant K of 7.20×10⁴ M ^?1, which is remarkably high for bonding of pyridine to ZnP.     

Direct Electrochemistry of Glucose Oxidase Immobilized on Titanium Carbide‐Au Nanoparticles‐Fullerene C60 Composite Film and Its Biosensing for Glucose

The direct electrochemistry of glucose oxidase (GOD) immobilized on the designed titanium carbide‐Au nanoparticles‐fullerene C₆₀ composite film modified glassy carbon electrode (TiC‐AuNPs‐C₆₀/GCE) and its biosensing for glucose were investigated. UV‐visible and Fourier‐transform infrared spectra of the resulting GOD/TiC‐AuNPs‐C₆₀ composite film suggested that the immobilized GOD retained its original structure. The direct electron transfer behaviors of immobilized GOD at the GOD/TiC‐AuNPs‐C₆₀/GCE were investigated by cyclic voltammetry in which a pair of well‐defined, quasi‐reversible redox peaks with the formal potential (E^0′) of ‐0.484 V (vs. SCE) in phosphate buffer solution (0.05 M, pH 7.0) at the scan rate of 100 mV·s^?1 were obtained. The proposed GOD modified electrode exhibited an excellent electrocatalytic activity to the reduction of glucose, and the currents of glucose reduction peak were linearly related to glucose concentration in a wider linearity range from 5.0 × 10^?6 to 1.6 × 10^?4 M with a correlation coefficient of 0.9965 and a detection limit of 2.0 × 10^?6 M (S/N = 3). The sensitivity and the apparent Michaelis‐Menten constant (K_M^app) were determined to be 149.3 μA·mM^?1·cm^?2 and 6.2 × 10^?5 M, respectively. Thus, the protocol will have potential application in studying the electron transfer of enzyme and the design of novel electrochemical biosensors.     

Synthesis,Structure and Photophysical Properties of Ferrocenyl or Mixed Sandwich Cobaltocenyl Ester Linked meso‐Tetratolylporphyrin Dyads

We report here the design and synthesis of porphyrin–metallocene dyads consisting of a metallocene [either ferrocene or mixed sandwich η⁵‐[C₅H₄(COOH)]Co(η⁴‐C₄Ph₄) connected via an ester linkage at meso phenyl position of either free‐base or zinc porphyrin. All these dyad systems were characterized by various spectroscopic and electrochemical methods. A dimeric form of this molecule was observed in the X‐ray crystal structure of Zn‐TTPCo. The absorption spectra of all four dyads indicated the absence of electronic interactions between porphyrin macrocycle and metallocene in the ground state. However, interestingly, in all four dyads, fluorescence emission of the porphyrin was quenched (19–55%) as compared to their monomeric units. The quenching was more pronounced in ferrocene derivatives rather than cobaltocenyl derivatives. The emission quenching can be attributed to the excited‐state intramolecular photoinduced electron transfer from metallocene to singlet excited state of porphyrin and the electron‐transfer rates (k_ET) were established in the range 1.51 × 10⁸ to 1.11 × 10⁹ s^?1. They were found to be solvent dependent.     

Ultrafast Photoinduced Energy and Electron Transfer in Multi‐Modular Donor–Acceptor Conjugates

New multi‐modular donor–acceptor conjugates featuring zinc porphyrin (ZnP), catechol‐chelated boron dipyrrin (BDP), triphenylamine (TPA) and fullerene (C₆₀), or naphthalenediimide (NDI) have been newly designed and synthesized as photosynthetic antenna and reaction‐center mimics. The X‐ray structure of triphenylamine‐BDP is also reported. The wide‐band capturing polyad revealed ultrafast energy‐transfer (k_ENT=1.0×10¹² s^?1) from the singlet excited BDP to the covalently linked ZnP owing to close proximity and favorable orientation of the entities. Introducing either fullerene or naphthalenediimide electron acceptors to the TPA‐BDP‐ZnP triad through metal–ligand axial coordination resulted in electron donor–acceptor polyads whose structures were revealed by spectroscopic, electrochemical and computational studies. Excitation of the electron donor, zinc porphyrin resulted in rapid electron‐transfer to coordinated fullerene or naphthalenediimide yielding charge separated ion‐pair species. The measured electron transfer rate constants from femtosecond transient spectral technique in non‐polar toluene were in the range of 5.0×10⁹–3.5×10¹⁰ s^?1. Stabilization of the charge‐separated state in these multi‐modular donor–acceptor polyads is also observed to certain level.     

Electrochemical Oxidation of Methionine Mediated by a Fullerene‐C60 Modified Gold Electrode

The usefulness of a C₆₀‐fullerene modified gold (Au) electrode in mediating the oxidation of methionine in the presence of potassium ions electrolyte has been demonstrated. During cyclic voltammetry, an oxidation peak of methionine appearing at +1.0 V vs. Ag/AgCl was observed. The oxidation current of methionine is enhanced by about 2 times using a C₆₀ modified gold electrode. The current enhancement is significantly dependent on pH, temperature and C₆₀ dosage. Calibration plot reveals linearity of up to 0.1 mM with a current sensitivity of close to 50 mA L mol^?1 and detection limit of 8.2×10^?6 M. The variation of scan rate study shows that the system undergoes diffusion‐controlled process. Diffusion coefficient and rate constant of methionine were determined using hydrodynamic method (rotating disk electrode) with values of 1.11×10^?5 cm² s^?1 and 0.0026 cm s^?1 respectively for unmodified electrode while the values of diffusion coefficient and rate constant of methionine using C₆₀ modified Au electrode are 5.7×10^?6 cm² s^?1 and 0.0021 cm s^?1 respectively.     

Poly(styrene‐b‐isobutylene) multiarm star‐block copolymers

Multiarm star‐branched polymers based on poly(styrene‐b‐isobutylene) (PS‐PIB) block copolymer arms were synthesized under controlled/living cationic polymerization conditions using the 2‐chloro‐2‐propylbenzene (CCl)/TiCl₄/pyridine (Py) initiating system and divinylbenzene (DVB) as gel‐core‐forming comonomer. To optimize the timing of isobutylene (IB) addition to living PS⊕, the kinetics of styrene (St) polymerization at −80°C were measured in both 60 : 40 (v : v) methyl cyclohexane (MCHx) : MeCl and 60 : 40 hexane : MeCl cosolvents. For either cosolvent system, it was found that the polymerizations followed first‐order kinetics with respect to the monomer and the number of actively growing chains remained invariant. The rate of polymerization was slower in MCHx : MeCl (k_app = 2.5 × 10⁻³ s⁻¹) compared with hexane : MeCl (k_app = 5.6 × 10⁻³ s⁻¹) ([CCl]_o = [TiCl₄]/15 = 3.64 × 10⁻³M; [Py] = 4 × 10⁻³M; [St]_o = 0.35M). Intermolecular alkylation reactions were observed at [St]_o = 0.93M but could be suppressed by avoiding very high St conversion and by setting [St]_o ≤ 0.35M. For St polymerization, k_app = 1.1 × 10⁻³ s⁻¹ ([CCl]_o = [TiCl₄]/15 = 1.82 × 10⁻³M; [Py] = 4 × 10⁻³M; [St]_o = 0.35M); this was significantly higher than that observed for IB polymerization (k_app = 3.0 × 10⁻⁴ s⁻¹; [CCl]_o = [Py] = [TiCl₄]/15 = 1.86 × 10⁻³M; [IB]_o = 1.0M). Blocking efficiencies were higher in hexane : MeCl compared with MCHx : MeCl cosolvent system. Star formation was faster with PS‐PIB arms compared with PIB homopolymer arms under similar conditions. Using [DVB] = 5.6 × 10⁻²M = 10 times chain end concentration, 92% of PS‐PIB arms (M_n,PS = 2600 and M_n,PIB = 13,400 g/mol) were linked within 1 h at −80°C with negligible star–star coupling. It was difficult to achieve complete linking of all the arms prior to the onset of star–star coupling. Apparently, the presence of the St block allows the PS‐PIB block copolymer arms to be incorporated into growing star polymers by an additional mechanism, namely, electrophilic aromatic substitution (EAS), which leads to increased rates of star formation and greater tendency toward star–star coupling. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 1629–1641, 1999     

Kinetic investigation of gas‐phase reactions between the OH‐radical and o‐, m‐, p‐ethyltoluene and n‐nonane in air

We have carried out relative rate experiments (T = 294 ± 2 K, atmospheric pressure) to investigate the OH‐oxidation of o‐, m‐, and p‐ethyltoluene and n‐nonane (k₁, k₂, k₃, and k₄ respectively). The experiments were performed in a 2‐m³ smog chamber with Teflon coated walls. The rate constants obtained are (in cm³ molecule^?1 s^?1 with two sigma uncertainties): k₁ = (1.36 ± 0.07) × 10^?11; k₂ = (2.12 ± 0.26) × 10^?11; k₃ = (1.47 ± 0.04) × 10^?11, and k₄ = (0.95 ± 0.02) × 10^?11. The measured rate constants are in accordance with previously published data, so that a coherent group of values for the compounds studied can be established. Atmospheric implications, ozone, and particle production are discussed. In addition, we have determined the amount of o‐, m‐, and p‐ethyltoluenes in different types of gasoline. © 2004 Wiley Periodicals, Inc. Int J Chem Kinet 36: 367–378 2004     

Fullerene‐β‐Cyclodextrin Conjugate Based Electrochemical Sensing Device for Ultrasensitive Detection of p‐Nitrophenol

The article describes the use of a fullerene (C₆₀)‐β‐cyclodextrin conjugate, synthesized via 1,3‐dipolar cycloaddition, for the ultrasensitive electrochemical detection of p‐nitrophenol. This conjugate was successfully immobilized on the surface of a glassy carbon electrode and the developed device showed high activity towards p‐nitrophenol due to the synergetic effect of C₆₀, the latter becoming highly conductive upon reduction. The determination of p‐nitrophenol was performed by using square wave voltammetry over a concentration range from 2.8×10^?9 mol L^?1 to 4.2×10^?7 mol L^?1 and the detection limit was calculated to be 1.2×10^?9 mol L^?1.     

Photoinduced Electron Transfer in an Amine–Corrole–Perylene Bisimide Assembly: Charge Separation over Terminal Components Favoured by Solvent Polarity

An assembly has been synthesised that consists of four units: a meso‐substituted corrole (C3), perylene bisimide (PI), and two electron‐rich triphenylamine (DPA) units. PI is connected through a 1,4‐phenylene bridge to C3, whereas the two DPA units are linked to C3 through a diphenyl ether linkage, which is used for the first time to connect the various moieties. Various synthetic strategies were elaborated, and the chosen one afforded the final system in six steps in an overall yield of 6 %. The resulting assembly, made of three different units, was named a “triad”. Excitation of the corrole (C3) or perylene bisimide (PI) units led to the charge‐separated state DPA‐C3⁺‐PI^? with a rate k>10¹¹ s^?1 in benzonitrile and dichloromethane (CH₂Cl₂) or with k of the order of 10¹⁰ s^?1 in toluene. The latter charge‐separated state decayed to the ground state with a rate k=1.8×10⁹ s^?1 in toluene. In the polar solvents benzonitrile and dichloromethane, recombination to the ground state competes with a charge shift to form the distal charge‐separated state, DPA⁺‐C3‐PI^?, the formation of which occurs with a yield of 50 %. Recombination to the ground state of DPA⁺‐C3‐PI^? occurs with a rate k=5×10⁷ s^?1 in CH₂Cl₂ and k=2×10⁷ s^?1 in benzonitrile.     

Electrochemical Behaviors of Adenosine‐5′‐triphosphate on Molecular Wire Modified Carbon Paste Electrode and Its Sensitive Detection

A new electrochemical method was proposed for the determination of adenosine‐5′‐triphosphate (ATP) based on the electrooxidation at a molecular wire (MW) modified carbon paste electrode (CPE), which was fabricated with diphenylacetylene (DPA) as the binder. A single well‐defined irreversible oxidation peak of ATP appeared on MW‐CPE with adsorption‐controlled process and enhanced electrochemical response in a pH 3.0 Britton‐Robinson buffer solution, which was due to the presence of high conductive DPA in the electrode. The electrochemical parameters of ATP were calculated with the electron transfer coefficient (α) as 0.54, the electron transfer number (n) as 1.9, the apparent heterogeneous electron transfer rate constant (k_s) as 2.67 × 10^?5 s^?1 and the surface coverage (Γ_T) as 4.15 × 10^?10 mol cm^?2. Under the selected conditions the oxidation peak current was proportional to ATP concentration in the range from 1.0 × 10^?7 mol L^?1 to 2.0 × 10^?3 mol L^?1 with the detection limit as 1.28 × 10^?8 mol L^?1 (3σ) by sensitive differential pulse voltammetry. The proposed method showed good selectivity without the interferences of coexisting substances and was successful applied to the ATP injection samples detection.     

Photoinduced Electron Transfer between N,N, Nr,N' ‐Tetra‐(p‐methylphenyl)‐4, 4‐diamino‐1, 1'‐diphenyl Ether (TPDAE) and Fullerenes (C60/C70) by Laser Flash Photolysis

The photoinduced electron‐transfer reaction of N, N, N', N'‐tetra‐(p‐methylphenyl)‐4,4'‐diamino‐1,1'‐diphenyl ether (TPDAE) and fullerenes (C₆₀/C₇₀) by nanosecond laser flash photolysis occurred in benzonitrile. Transient absorption spectral measurements were carried out during 532 nm laser flash photolysis of a mixture of the fullerenes (C₆₀/C₇₀) and TPDAE. The electron transfer from the TPDAE to excited triplet state of the fullerenes (C₆₀/C₇₀) quantum yields and rate constants of electron transfer from TPDAE to excited triplet state of fullerenes (C₆₀/C₇₀) in benzonitrile have been evaluated by observing the transient absorption bands in the near‐IR region where the excited triplet state, radical anion of fullerenes (C₆₀/C₇₀) and radical cations of TPDAE are expected to appear.     

Kinetics of phenyl radical reactions with propane,n‐butane,n‐hexane,and n‐octane: Reactivity of C6H5 toward the secondary C?H bond of alkanes

The kinetics of C₆H₅ reactions with n‐C_nH_2n+2 (n = 3, 4, 6, 8) have been studied by the pulsed laser photolysis/mass spectrometric method using C₆H₅COCH₃ as the phenyl precursor at temperatures between 494 and 1051 K. The rate constants were determined by kinetic modeling of the absolute yields of C₆H₆ at each temperature. Another major product C₆H₅CH₃ formed by the recombination of C₆H₅ and CH₃ could also be quantitatively modeled using the known rate constant for the reaction. A weighted least‐squares analysis of the four sets of data gave k (C₃H₈) = (1.96 ± 0.15) × 10¹¹ exp[?(1938 ± 56)/T], and k (n‐C₄H₁₀) = (2.65 ± 0.23) × 10¹¹ exp[?(1950 ± 55)/T] k (n‐C₆H₁₄) = (4.56 ± 0.21) × 10¹¹ exp[?(1735 ± 55)/T], and k (n?C₈H₁₈) = (4.31 ± 0.39) × 10¹¹ exp[?(1415 ± 65)T] cm³ mol^?1 s^?1 for the temperature range studied. For the butane and hexane reactions, we have also applied the CRDS technique to extend our temperature range down to 297 K; the results obtained by the decay of C₆H₅ with CRDS agree fully with those determined by absolute product yield measurements with PLP/MS. Weighted least‐squares analyses of these two sets of data gave rise to k (n?C₄H₁₀) = (2.70 ± 0.15) × 10¹¹ exp[?(1880 ± 127)/T] and k (n?C₆H₁₄) = (4.81 ± 0.30) × 10¹¹ exp[?(1780 ± 133)/T] cm³ mol^?1 s^?1 for the temperature range 297‐‐1046 K. From the absolute rate constants for the two larger molecular reactions (C₆H₅ + n‐C₆H₁₄ and n‐C₈H₁₈), we derived the rate constant for H‐abstraction from a secondary C? H bond, k_s?CH = (4.19 ± 0.24) × 10¹⁰ exp[?(1770 ± 48)/T] cm³ mol^?1 s^?1. © 2003 Wiley Periodicals, Inc. Int J Chem Kinet 36: 49–56, 2004     

Benzodifuran‐containing well‐defined π‐conjugated polymers for photovoltaic cells

Two well‐defined alternating π‐conjugated polymers containing a soluble electroactive benzo[1,2‐b:4,5‐b′]difuran (BDF) chromophore, poly(BDF‐(9‐phenylcarbazole)) (PBDFC), and poly(BDF‐benzothiadiazole) (PBDFBTD) were synthesized via Sonogashira copolymerizations. Their optical, electrochemical, and field‐effect charge transport properties were characterized and compared with those of the corresponding homopolymer PBDF and random copolymers of the same overall composition. All these polymers cover broad optical absorption ranges from 250 to 750 nm with narrow optical band gaps of 1.78–2.35 eV. Both PBDF and PBDFBTD show ambipolar redox properties with HOMO levels of ?5.38 and ?5.09 eV, respectively. The field‐effect mobility of holes varies from 2.9 × 10^?8 cm² V^?1 s^?1 in PBDF to 1.0 × 10^?5 cm² V^?1 s^?1 in PBDFBTD. Bulk heterojunction solar cell devices were fabricated using the polymers as the electron donor and [6,6]‐phenyl‐C₆₁‐butyric acid methyl ester as the electron acceptor, leading to power conversion efficiencies of 0.24–0.57% under air mass 1.5 illumination (100 mW cm^?2). These results indicate that their band gaps, molecular electronic energy levels, charge mobilities, and molecular weights are readily tuned by copolymerizing the BDF core with different π‐conjugated units. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

β,β‐(1,4‐Dithiino)subporphyrin Dimers Capturing Fullerenes with Large Association Constants

β,β‐(1,4‐Dithiino)subporphyrin dimers 7‐syn and 7‐anti were synthesized by the nucleophilic aromatic substitution reaction of 2‐bromo‐3‐(4‐methoxyphenylsulfonyl)subporphyrin 4 with 2,3‐dimercaptosubporphyrin 5 under basic conditions followed by axial arylation. Additions of C₆₀ or C₇₀ to a dilute solution of 7‐anti (ca. 10^?6 m ) in toluene did not cause appreciable UV/Vis spectral changes, while similar additions to a concentrated solution (ca. 10^?3 m ) resulted in precipitation of complexes. In contrast, dimer 7‐syn captured C₆₀ and C₇₀ in different complexation stoichiometries in toluene; a 1:1 manner and a 2:1 manner, respectively, with large association constants; K_a=(1.9±0.2)×10⁶ m ^?1 for C₆₀@ 7‐syn , and K₁=(1.6±0.5)×10⁶ and K₂=(1.8±0.9)×10⁵ m ^?1 for C₇₀@( 7‐syn )₂. These association constants are the largest for fullerenes‐capture by bowl‐shaped molecules reported so far. The structures of C₆₀@ 7‐anti , C₇₀@ 7‐anti , C₆₀@ 7‐syn , and C₇₀@ 7‐syn have been determined by single‐crystal X‐ray diffraction analysis.