ELECTROCHEMICAL COPOLYMERIZATION OF DIBENZOFURAN AND 3-METHYLTHIOPHENE IN BORON TRIFLUORIDE DIETHYL ETHERATE

The copolymerization of dibenzofuran(DBF)and 3-methylthiophene(MET)was successfully achieved electrochemically by direct anodic oxidation of the monomer mixtures in boron trifluoride diethyl etherate.The effects of applied polymerization potential and the monomer concentration ratios on the copolymerization were investigated by linear sweep voltammetry and cyclic voltammetry(CV).The structure of copolymer films were investigated by UV-Vis,infrared spectroscopy,thermal analysis.As-formed novel copolymers ...     

Effect of Sn content on the properties of passive film on PbSn alloy in sulfuric acid solution

The effect of Sn content on properties of anodic film formed on PbSn alloys in sulfuric acid solution was investigated using linear sweeping voltage (LSV), cyclic voltammetry (CV), and a.c. voltammetry (ACV), based on the Mott-Schottky analysis. The results revealed that the addition of Sn into lead alloys can promote the corrosion resistance property and could decrease the impedance of anodic film; these results were more remarkable with enhancing the Sn content. The over potential of oxygen evolution on lead alloys enhanced with the increase of Sn content. The Mott-Schottky analysis indicated that the passive film appeared an n-type semiconductor, and the donor density of passive film increased with increasing Sn content. The increased vacancies in the passive film with Sn content increasing could illustrate this trend.     

Anodic Cyanation of 1-（1-Methoxycarbonyl ethyl） piperidine

α-Aminonitriles were prepared efficiently from anodic cyanation of α-amino ester. The effect of different solvents and electrolytes was studied. The other byproducts were analyzed.     

Electroredox Behavior of Novel Poly viol ogens Modified Electrodes

The electroredox behavior of novel modified electrodes coated with complexes of different polyviologens was investigated using cyclic voltammetry. The influences of compositions of electrolyte complex on the reversibility of the modified electrode and the electrochromic properties were studied also. It was found that all the ratios of integrated charges of cathodic to anodic scan (Qc/QA) are close to 1, which indicates that these modified electrodes have good reversible behavior. Repeated stepping over the first wave for 500 scans, the PSS-PX(p)V modified electrode showed excellent stability. The first reduction potential (E1), decrease of current height (Dec%), response time (tre tox) of various polyviologen modified electrodes were reported. In addition, the effect of the coverage of polyviologen on the electrode surface was also examined. The rate of electron transfer in this heterogeneous system is diffusion-controlled, consistent with the Conttrell equation.     

An Electrochemical Study on the Corrosion Inhibition of Stainless Steel by Polyaniline Film

Polyaniline(PANI)film was electrosynthesized on 304 stainless steel by cyclic voltammetry using aqueous oxalic acid as supporting electrolyte.The potential sweep rates were changed to achieve the PANI film with different thickness and structures.Protective properties of the PANI film for corrosion of stainless steel in 3% NaC1 aqueous solution were investigated by monitoring potentiodynamic polarization curves and electrochemical impedance spectroscopy(EIS).The results showed that the PANI film which was formed with lower sweep rate led to more positive shift of corrosion potential and greater charge transfer resistance,reflecting higher inhibition for corrosion of the stainless steel.     

Effect of Sb on the properties of anodic Pb(Ⅱ) oxide film formed in alkaline solution

The composition and properties of the anodic films formed on Pb and Pb-3at.%Sb alloy at -0.10 V (vs. Hg/HgO) for 2.5 h in 0.1 mol.dm-3 NaOH solution (25℃) were investigated by cyclic voltammetry, linear sweep voltammetry, open circuit decay curve, photocurrent technique, X-ray diffraction (XRD) and scanning electron microscopy (SEM). It was found that the anodic film formed oh Pb mainly consists of t-PbO, while that on Pb-3at.%Sb consists of o-PbO, t-PbO and a small amount of orthorhombic Sb2O3. The dominant component of the film anodically grown on Pb-3at.%Sb for less than 5 min is o-PbO, however, t-PbO is the major component of the anodic film formed for 1 h or longer. It is established that Sb suppresses the growth of t-PbO. The anodic film formed on Pb-3at.%Sb is less porous than that on Pb. The bandgap energies of t-PbO and o-PbO in the films were determined by photocurrent measurements to be 1.83-1.84 eV and 2.60 eV, respectively.     

Electrochemical Studies of 1,4-Bis[2-(2-pyridyl)-vinyl] Benzene and 1,4-Bis[2-(4-pyridyl) vinyl] Benzene Laser Dyes via Cyclic Voltammetry, Convolutive Voltammetry and Digital Simulation Methods

Electrochemical properties of two diolefinic laser dyes namely 1,4-bis[2-(2-pyridyl)-vinyl] benzene (2PVB) and 1,4-bis[2-(4-pyridyl) vinyl] benzene (4PVB) have been investigated using cyclic voltammetry and convolutive voltammetry combined with digital simulation at a platinum electrode in 0.1 mol/L tetrabutyl ammonium perchlorate (TBAP) in the two different solvents acetonitrile (CH3CN) and dimethylformamide (DMF). The species were reduced via consumption of two sequential electrons to form radical anion and dianion. In switching the potential to positive direction, the two compounds were oxidized by loss of one electron, which was followed by a fast isomerisation process. The electrode reaction pathway and the electrochemical parameters of the investigated compounds were determined using cyclic voltammetry. The extracted electrochemical parameters were verified and confirmed via digital simulation and convolutive voltammetry methods.     

The Reactions of 3,7—Dinitrodibenzobromolium Salt with Some Amines

The reactions of 3,7-dinitrodibenzobromolium salt with some amines were studied. A reaction mechanism based on the structure of the major product 6 and the minor product 7 was proposed. The reaction was considered to proceed via a substituted benzyene intermediate.     

银掺杂聚(2-氨基二苯胺)修饰碳糊电极作为一种简单有效的电催化剂用于甲醛氧化（英文）

This work describes the promising activity of silver nanoparticles on the surface of a poly(2‐amino diphenylamine) modified carbon paste electrode(CPE) towards formaldehyde oxidation. Electro‐deposition of the conducting polymer film on the CPE was carried out using consecutive cyclic voltammetry in an aqueous solution of 2‐aminodiphenylamine and HCl. Nitrogen groups in the polymer backbone had a Ag ion accumulating effect, allowing Ag nanoparticles to be electrochemi‐cally deposited on the surface of the electrode. The electrochemical and morphological characteris‐tics of the modified electrode were investigated. The electro‐oxidation of formaldehyde on the sur‐face of electrode was studied using cyclic voltammetry and chronoamperometry in aqueous solu‐tion of 0.1 mol/L Na OH. The electro‐oxidation onset potential was found to be around-0.4 V, which is unique in the literature. The effect of different concentrations of formaldehyde on the electrocat‐alytic activity of the modified electrode was investigated. Finally, the diffusion coefficient of formal‐dehyde in alkaline media was calculated to be 0.47 × 10–6 cm2/s using chronoamperometry.     

Effects of Lanthanide Ions on Electrooxidation of Methanol

Four kinds of lanthanide ions（Sm^3＋,Yb^3＋,Eu^3＋,La^3＋）as an additive were added into the aqueous solution containing methanol,respectively,and their effects on methanol elecotrooxidation in aqueous solutions were studied with cyclic voltammetry.The results show that the four kinds of ions have promotion action upon the electrooxidation of methanol to different degrees.The best additive,Sm^3＋,can increase the anodic oxidation current of methanol by 80%and the peak potential shifted negatively about 50 mV.The promotion effects of the lanthanide ions were considered to be related to the extranuclear electron distribution of these ions and their adsorption on the Pt electrode surface.     

Photorechargeable Properties of Metal Hydride-SrTiO3 Electrode

A photosensitive metal hydride electrode was prepared by modification with perovskite-type SrTiO3 photocatalyst. The photorechargeable properties of the prepared electrodes were investigated by using electrochemical cyclic voltammetry and EIS measurements. The results showed that the modified electrode exhibited the obvious photorechargeable properties. The reduction current increased remarkably under the xeon light irradiation compared with the unmodified electrode. During the photocharging process, the potential of the modified electrode shifted quickly to negative direction and a potential plateau of about -0.90V (vs. Hg/HgO) occurred at the end of light irradiation. The corresponding discharge capacity of the electrode was about 5.4 mAh/g.     

CATALYSIS OF METALLO-PORPHYRINS IN OXIDATION OF P-NITROTOLUENE BY ELECTRO-GENEEATED SUPEROXIDE ION

The oxidation of pnitrotoluene with electro-generated superoxide ion in the presence or absence of metallo-porphyrins FeTPP, MnTPP and CoTPP in DMF was studied by cyclic voltammetry and controlled potential electrolysis, Metallo-porphyrins as catalysts for electroreduction of O_2, they can not only increase yields of p-nitrobensoic acid and selectivities of reaction but also enable the reaction proceed at lower negative potential.     

Study on polymerization and structure of polydiphenylamine

The electrochemical oxidation of diphenylamine in acetonitrile produces an adherent uniform polymer film which exhibits mutiple colour variation(yellow-green-blue) in a wide range of potential scan. The polymerization mechanism and the structure of the polymer were studied by cyclic voltammetry, FT-IR and in situ ESR. The results indicate that the electrochemical polymerization of diphenylamine belongs to a cationic radical polymerization process. During electrolysis, only oligomers were initialy produced, then polymer film was formed on the electrode surface. The electropolymerization performs via the 4,4' C-C phenyl-phenyl coupling mechanism.     

A facile protocol for N-Cbz protection of amines in PEG-600

正An efficient and eco-friendly protocol for the chemoselective N-benzyloxycarbonylation of amines was described.The reaction of amines with benzyl chloroformate(Cbz-Cl) in the presence of PEG-600 at room temperature afforded the corresponding N-Cbz derivatives in excellent yields.The method is applicable to the N-Cbz protection of aliphatic(acyclic and cyclic) and aromatic amines.     

A facile electrochemical synthesis of caffeic acid derivatives in the presence of acetylacetone or methyl acetoacetate in aqueous medium

The anodic oxidation of caffeic acid in the presence of acetylacetone or methyl acetoacetate in aqueous solution has been studied by cyclic voltammetry and controlled-potential electrolysis techniques. The result showed that caffeic acid was oxidized to the corresponding o-benzoquinone, which underwent further Michael-addition with acetylacetone or methyl acetoacetate to produce caffeic acid derivative 3,4-dihydroxy-6-(1-acetylacetone)-yl cinnamic acid 4a or 3,4-dihydroxy-6-(1-acetyl-methylacetate)-yl cinnamic acid 4b.     

Systematic study of the transfer of amino acids across the water/1,2-dichloroethane interface facilitated by dibenzo-18-crown-6

Facilitated ion transfer reactions of 20 amino acids with dibenzo-18-crown-6 (DB18C6) at the water/1,2-dichloroethane (W/DCE) interfaces supported at the tips of micro- and nano-pipets were investigated systematically using cyclic voltammetry. It was found that there were only 10 amino acids, that is, Leu, Val, lie, Phe, Trp, Met, Ala, Gly, Cys, Gin (in brief), whose protonated forms as cations can give well-defined facilitated ion transfer voltammograms within the potential window, and the reaction pathway was proven to be consistent with the transfer by interfacial complexation/dissociation (TIC/TID) mechanisms. The association constants of DB 18C6 with different amino acids in the DCE (β0), and the kinetic parameters of reaction were evaluated based on the steady-state voltammetry of micro- or nano-pipets, respectively. The experimental results demonstrated that the selectivity of complexation of protonated amino acid by DB18C6 compared with that of alkali metal cations was low, which can be attribu     

循环伏安法制备Ag纳米线阵列

In this paper, highly ordered anodic aluminum oxide (AAO) template with hexagonal close-packed arrays was successfully fabricated through a two-step anodization process. Ag nanowire arrays with high aspect ratio were prepared using cyclic voltammetry within the confined nanochannels of AAO template. In addition, standing Ag nanowire arrays free-support of templates were also fabricated successfully by cyclic voltammetry method. The micrographs and crystal structures of Ag nanowires were studied by field emission scanning electron microscope (FESEM) and X-ray diffraction (XRD). FESEM observation showed that the Ag nanowire arrays with high aspect ratio lie orderly on the surface of the substrate. The diameter of the Ag nanowire is about 60 nm and the length up to 30 μm or more. While the controlled nanowire arrays exhibit highly ordered structure in large area and the standing Ag nanowire in the array has the length of 1 μm and good orientation. XRD results illustrated that the Ag nanowires in the arrays deposited by cyclic voltammetry method have a face centered cubic structure and are preferentially oriented in the (220) direction.     

Electrochemical Oxidation of Chlorimuron-ethyl on Ti/SnO2-Sb2O5/PbO2 Anode for Waste Water Treatment

<正>The electrochemical oxidation of chlorimuron-ethyl on Ti/SnO_2-Sb_2O_5/PbO_2 electrode was studied by cyclic voltammetry. The electrochemical behaviour of the electrode in a sodium sulfate solution and in the mixture solution of sodium sulfate and chlorimuron-ethyl was studied.The experimental results of cyclic voltammetry show that the acidic medium was suitable for the efficient electrochemical oxidation of chlorimuron-ethyl.Some electro-generated reagent was formed in the electrolysis process and chlorimuron-ethyl could be oxidized by the electro-generated reagent.A Ti/SnO_2-Sb_2O_5/PbO_2 electrode was used as the anode and the electrolysis experiment was carried out under the optimized conditions.The electrolysis process was monitored by UV-Vis spectrometry and high performance liquid chromatography(HPLC),and the chemical oxygen demand(COD) was determined by the potassium dichromate method.The mechanism of chlorimuron-ethyl to be oxided was studied primarily by the cyclic voltammetry and UV-Vis spectrometry.The results of electrolysis experiment demonstrate the possibility of the electrode to be used as an anode for the electrochemical treatment of chlorimuron-ethyl contained in waste water.     

Methanol Electrooxidation on Smooth Platinum Modified with Ru：the Influence of Ru Coverage and Potentials on Oxidative Current and Products

Methanol oxidation on smooth Pt electrode modified with differ-ent coverage of Ru was studied using cyclic voltammetry and potential step combined with differential electrochemical mass spectroscopy. The current efficiency of formed CO2 was calcu-lated from faraday current and ion current of m/z = 44. The results show that Ru modified Pt electrode with the coverage of ca. 0.3 has the highest catalytic activity for methanol electroox-idation, i. e. faraday current and the current efficiency of CO2 at the low potentials reach to the maximum. In addition, Ru loses its co-catalytic properties at the high potentials.