Molecular simulation of carbon dioxide/methane/hydrogen mixture adsorption in metal-organic frameworks

This work performs a systematic computational study toward a molecular understanding of the separation characteristics of metal-organic frameworks (MOFs), for which the purification of synthetic gas by two representative MOFs, MOF-5 and Cu-BTC, is adopted as an example. The simulations show that both geometry and pore size affect largely the separation efficiency, complex selectivity behaviors with different steps can occur in MOFs, and the electrostatic interactions that exist can enhance greatly the separation efficiency of gas mixtures composed of components with different chemistries. Furthermore, the macroscopic separation behaviors of the MOF materials are elucidated at a molecular level to give insight into the underlying mechanisms. The findings as well as the molecular-level elucidations provide useful microscopic information toward a complete understanding of the separation characteristics of MOFs that may lead to general design strategies for synthesizing new MOFs with tailored properties, as well as guiding their practical applications.     

Cu-BTC及其衍生物在苯甲醇选择氧化反应中的催化活性

以硝酸铜和均苯三甲酸(BTC)为原料,水热合成了一种金属有机骨架化合物Cu-BTC,在水相中催化苯甲醇选择氧化反应,H2O2氧化剂,优化了Cu-BTC的晶化条件.70℃反应1 h,Cu-BTC(110C/24 h)上的苯甲醇转化率为75.4%、苯甲醛选择性83.5%,但反应后Cu-BTC骨架完全塌陷.在氮气中高温焙烧Cu-BTC,制得衍生物Cu@C,也用于催化苯甲醇氧化反应.结果表明:Cu@C催化剂重复使用5次,可维持较高的苯甲醇转化率,但苯甲醛选择性有所下降.用X射线衍射(XRD)、N2物理吸附(BET)、热分析(TG-DSC)、红外光谱(FTIR)、能量色散X射线光谱分析(EDX)等技术对催化剂进行了结构表征,发现:Cu@C在反应中生成的Cu2O促进了苯甲醛的深度氧化.     

A fiber optic sensor with a metal organic framework as a sensing material for trace levels of water in industrial gases

Industrial gases such as nitrogen, oxygen, argon, and helium are easily contaminated with water during production, transfer and use, because there is a high volume fraction of water in the atmosphere (approximately 1.2% estimated with the average annual atmospheric temperature and relative humidity). Even trace water (<1 parts per million by volume (ppmv) of H₂O, dew point < −76 °C) in the industrial gases can cause quality problems in the process such as production of semiconductors. Therefore, it is important to monitor and to control trace water levels in industrial gases at each supplying step, and especially during their use. In the present study, a fiber optic gas sensor was investigated for monitoring trace water levels in industrial gases. The sensor consists of a film containing a metal organic framework (MOF). MOFs are made of metals coordinated to organic ligands, and have mesoscale pores that adsorb gas molecules. When the MOF, copper benzene-1,3,5-tricarboxylate (Cu-BTC), was used as a sensing material, we investigated the color of Cu-BTC with water adsorption changed both in depth and tone. Cu-BTC crystals appeared deep blue in dry gases, and then changed to light blue in wet gases. An optical gas sensor with the Cu-BTC film was developed using a light emitting diode as the light source and a photodiode as the light intensity detector. The sensor showed a reversible response to trace water, did not require heating to remove the adsorbed water molecules. The sample gas flow rate did not affect the sensitivity. The obtained limit of detection was 40 parts per billion by volume (ppbv). The response time for sample gas containing 2.5 ppmvH₂O was 23 s. The standard deviation obtained for daily analysis of 1.0 ppmvH₂O standard gas over 20 days was 9%. Furthermore, the type of industrial gas did not affect the sensitivity. These properties mean the sensor will be applicable to trace water detection in various industrial gases.     

Nanoweb Surface-Mounted Metal–Organic Framework Films with Tunable Amounts of Acid Sites as Tailored Catalysts

Metal–organic frameworks (MOFs) are a promising class of materials for many applications, due to their high chemical tunability and superb porosity. By growing MOFs as (thin-)films, additional properties and potential applications become available. Here, copper (II) 1,3,5-benzenetricarboxylate (Cu-BTC) metal–organic framework (MOF) thin-films are reported, which were synthesized by spin-coating, resulting in “nanowebs”, that is, fiber-like structures. These surface-mounted MOFs (SURMOFs) were studied by using photoinduced force microscopy (PiFM) and time-of-flight secondary ion mass spectrometry (ToF-SIMS). The optimal concentration of precursors (10 mm ) was determined that resulted in chemically homogeneous, pure nanowebs. Furthermore, the morphology and (un)coordinated Cu sites in the web were tuned by varying the rotation speed of the spin-coating process. X-ray diffraction (XRD) analysis showed that rotation speeds ≥2000 rpm (with precursors in a water/ethanol solution) generate the catena-triaqua-μ-(1,3,5-benzenetricarboxylate)-copper(II), or Cu(BTC)(H₂O)₃ coordination polymer. X-ray photoelectron spectroscopy (XPS) highlighted the strong decrease in number of (defective) Cu⁺ sites, as the nanowebs mainly consist of coordinated Cu²⁺ Lewis acid sites (LAS) and organic linker–linker, for example, hydrogen-bonding, interactions. Finally, the Lewis-acidic character of the Cu sites is illustrated by testing the films as catalysts in the isomerization of α-pinene oxide. The higher number of LAS (≥3000 rpm), result in higher campholenic aldehyde selectivity reaching up to 87.7 %. Furthermore, the strength of a combined micro- and spectroscopic approach in understanding the nature of MOF thin-films in a spatially resolved manner is highlighted.     

Self-diffusion and transport diffusion of light gases in metal-organic framework materials assessed using molecular dynamics simulations

Metal-organic framework (MOF) materials pose an interesting alternative to more traditional nanoporous materials for a variety of separation processes. Separation processes involving nanoporous materials can be controlled by either adsorption equilibrium, diffusive transport rates, or a combination of these factors. Adsorption equilibrium has been studied for a variety of gases in MOFs, but almost nothing is currently known about molecular diffusion rates in MOFs. We have used equilibrium molecular dynamics (MD) to probe the self-diffusion and transport diffusion of a number of small gas species in several MOFs as a function of pore loading at room temperature. Specifically, we have studied Ar, CH4, CO2, N2, and H2 diffusion in MOF-5. The diffusion of Ar in MOF-2, MOF-3, and Cu-BTC has been assessed in a similar manner. Our results greatly expand the range of MOFs for which data describing molecular diffusion is available. We discuss the prospects for exploiting molecular transport properties in MOFs in practical separation processes and the future role of MD simulations in screening families of MOFs for these processes.     

Solvent-Driven Reversible Phase Transition of a Pillared Metal–Organic Framework

Over the last decade, the controllable reversible phase transition of functional materials has received growing interest as it shows unique suitability for various technological applications. Although many metal–organic frameworks (MOFs) possess a lamellar structure, the reversible structural transformation of MOFs between their three-dimensional (3D) phase and two-dimensional (2D) phase remains a largely unexplored area. Herein, we report for the first time a europium MOF with unprecedented reversible morphology in different solvents at room temperature. This europium MOF displayed a 3D nanorod morphology in organic solvent and a 2D nanobelt architecture in water. As a proof of concept for potential applications of this reversible-phase-transition MOF, we were able to use a delamination recovery method to load dye molecules that previously could not be loaded into europium MOFs.     

Hydrophobic Metal−Organic Frameworks and Derived Composites for Microelectronics Applications

The extraordinary characteristic features of metal−organic frameworks (MOFs) make them applicable for use in a variety of fields but their conductivity in microelectronics over a wide relative humidity (RH) range has not been extensively explored. To achieve good performance, MOFs must be stable in water, i. e., under humid conditions. However, the design of ultrastable hydrophobic MOFs with high conductivity for use in microelectronics as conducting and dielectric materials remains a challenge. In this Review, we discuss applications of an emerging class of hydrophobic MOFs with respect to their use as active sensor coatings, tunable low-κ dielectrics and conductivity, which provide high-level roadmap for stimulating the next steps toward the development and implementation of hydrophobic MOFs for use in microelectronic devices. Several methodologies including the incorporation of long alkyl chain and fluorinated linkers, doping of redox-active 7,7,8,8-tetracyanoquinodimethane (TCNQ), the use of guest molecules, and conducting polymers or carbon materials in the pores or surface of MOFs have been utilized to produce hydrophobic MOFs. The contact angle of a water droplet and a coating can be used to evaluate the degree of hydrophobicity of the surface of a MOF. These unique advantages enable hydrophobic MOFs to be used as a highly versatile platform for exploring multifunctional porous materials. Classic representative examples of each category are discussed in terms of coordination structures, types of hydrophobic design, and potential microelectronic applications. Lastly, a summary and outlook as concluding remarks in this field are presented. We envision that future research in the area of hydrophobic MOFs promise to provide important breakthroughs in microelectronics applications.     

Zr-Based MOFs with High Drug Loading for Adsorption Removal of Anti-Cancer Drugs: A Potential Drug Storage

A robust and highly water stable series of UiO-66-drived MOFs including UiO-66-NH₂, glycidyl methacrylate functionalized UiO-66-NH₂ (UiO-66-GMA) and ethylenediamine functionalized UiO-66-NH₂ (UiO-66-EDA) were synthesized solvothermally and studied their adsorption performances toward two anti-cancer drugs, methotrexate (MTX) and curcumin (CUR) in the case of overdose. It was found that functionalizing the surface of UiO-66-NH₂ nanoparticles with different functional groups remarkably changes the adsorption capacity and the ideal adsorption selectivity of MTX over CUR. Particularly, the UiO-66-EDA exhibited the highest adsorption capacities for both drugs, 540.78 and 423.85 mg/g for MTX and CUR, respectively, because of the strong interaction between drug molecules and adsorbent via hydrogen bonding due to the existence of different polar functional groups. The kinetics of drugs adsorption was investigated by three well-known kinetic models, which the output indicates that the adsorption of both drugs onto the synthesized MOFs follow the pseudo-second-order model. Moreover, it was found that the equilibrium adsorption results were well fitted with the Langmuir isotherm models, revealing that the adsorption of both drugs onto the synthesized MOFs is a monolayer adsorption process. Further investigation illustrated that the synthesized MOFs could be easily activated and reused after four successive adsorption–desorption cycles. The output of the present work is of main important for biomedical and environmental applications of MOFs as an outstanding adsorbent for adsorption removal of hazardous drugs from contaminated aqueous solutions.     

Progresses on electrospun metal–organic frameworks nanofibers and their wastewater treatment applications

Metal–organic frameworks (MOFs) have been proven to be outstanding adsorbent materials which possess excellent pollutant removal performances in wastewater treatment. However, MOFs consumption, loss, or blockage in reactor pipelines as well as the long and complicated recycling process severely limit their practical applications. Therefore, construction of novel MOFs composites with extremely high ease-of-use property has become a research hotspot, such as two-dimensional (2D) MOFs fibrous membranes. In this review, the exploitation of MOFs nanofibrous membranes via electrospinning and their applications in wastewater treatment are summarized. The MOFs nanofibers (NFs) architectures are established systematically by five routes: (1) direct electrospinning of MOFs-polymer; (2) induced growth of MOFs on electrospun NFs containing seeds; (3) growth of MOFs on electrospun organic NFs’ (4) growth of MOFs on electrospun inorganic NFs; and (5) simultaneous electrospinning and electrospraying. Furthermore, the applications of different types of MOFs nanofibrous membranes and their derivatives in water treatment and purification are discussed, including oil-water separation, the removal of heavy metal ions, organic dyes, personal care products, non-steroidal anti-inflammatory drugs (NSAIDs) and so on. The adsorption properties and mechanisms of electrospun MOFs nanofibrous membranes towards various environmental pollutants are discussed. Finally, the challenges of electrospun MOFs NFs, the limitations of their applications, and future development trends are prospected.     

功能化金属有机骨架材料去除饮用水污染物的研究进展

金属有机骨架(MOFs)材料是一类以过渡金属为中心、含杂原子的有机物为配体、通过配位作用形成的周期性网络多孔晶体材料。与其他的多孔材料相比,MOFs配体种类繁多,比表面积极大,孔径大小可调控且具有特殊(饱和或不饱和)的金属位点,在气体存储、催化、吸附与分离等领域有广阔的应用前景。近年来,功能化MOFs对污染物的富集和去除成为学者关注的热点。这是由于通过对MOFs进行功能化修饰,能够改变MOFs的孔径大小、表面带电性质等物化性质,从而实现对目标物更高效的吸附。该文综述了近年来功能化MOFs对饮用水污染物吸附的研究进展,包括饮用水污染物的类型及危害、功能化MOFs的制备方法以及去除饮用水污染物的应用,并对今后的发展前景进行了展望。     

Microplasma electrochemistry (MIPEC) strategy for accelerating the synthesis of metal organic frameworks at room temperature

Metal organic frameworks(MOFs) are a kind of promising materials in many applications,while the fast and controllable synthesis of MOFs is still challenging.Here,taking HKUST-1 as illustration,a microplasma electrochemistry(MIPEC) strategy was developed to accelerate the synthesis process of MOFs with micro-plasma acting as cathode.Treating the HKUST-1 precursor solution with micro-plasma cathode could not only transfer the electrons into the solution leading to the deprotonation effect,but also generate radical species to trigger and accelerate the nucleation and growth of MOFs at the plasmaliquid interface.Thus,uniform and nanosize MOFs could be prepared within minutes.The obtained MOFs show similar excellent uranium adsorption properties compared with those obtained by other method,with a highly adsorption capability of uranium with 550 mg/g in minutes.The novel MIPEC strategy developed in this work provides an alternative for controllable synthesis of MOFs,and especially has potential application in accelerating traditional organic synthesis.     

Effect of open metal sites on adsorption of polar and nonpolar molecules in metal-organic framework Cu-BTC

Atomistic grand canonical Monte Carlo simulations were performed in this work to investigate the role of open copper sites of Cu-BTC in affecting the separation of carbon monoxide from binary mixtures containing methane, nitrogen, or hydrogen. Mixtures containing 5%, 50%, or 95% CO were examined. The simulations show that electrostatic interactions between the CO dipole and the partial charges on the metal-organic framework (MOF) atoms dominate the adsorption mechanism. The binary simulations show that Cu-BTC is quite selective for CO over hydrogen and nitrogen for all three mixture compositions at 298 K. The removal of CO from a 5% mixture with methane is slightly enhanced by the electrostatic interactions of CO with the copper sites. However, the pore space of Cu-BTC is large enough to accommodate both molecules at their pure-component loadings, and in general, Cu-BTC exhibits no significant selectivity for CO over methane for the equimolar and 95% mixtures. On the basis of the pure-component and low-concentration behavior of CO, the results indicate that MOFs with open metal sites have the potential for enhancing adsorption separations of molecules of differing polarities, but the pore size relative to the sorbate size will also play a significant role.     

Isostructural NiII Metal–Organic Frameworks (MOFs) for Efficient Electrocatalysis of Oxygen Evolution Reaction and for Gas Sorption Properties

Design and synthesis of stable, active and cost-effective electrocatalyst for water splitting applications is an emerging area of research, given the depletion of fossil fuels. Herein, two isostructural Ni^II redox-active metal–organic frameworks (MOFs) containing flexible tripodal trispyridyl ligand ( L ) and linear dicarboxylates such as terephthalate (TA) and 2-aminoterphthalate (H₂NTA) are studied for their catalytic activity in oxygen evaluation reaction (OER). The 2D-layered MOFs form 3D hydrogen bonded frameworks containing one-dimensional hydrophilic channels that are filled with water molecules. The electrochemical studies reveal that MOFs display an efficient catalytic activity towards oxygen evolution reaction in alkaline conditions with an overpotential as low as 356 mV. Further, these 2D-MOFs exhibit excellent ability to adsorb water vapor (180–230 cc g⁻¹ at 273 K) and CO₂ (33 cc g⁻¹ at 273 K). The presence of hydrophilic functionality in the frameworks was found to significantly enhance the electrocatalytic activity as well as H₂O sorption.     

金属有机框架材料的结构、 动力学行为和主客体相互作用的固体核磁共振研究

金属有机框架材料(MOFs)在绿色能源气体储存、 二氧化碳捕获、 化学分离、 化学传感和多相催化等领域有着广泛的应用前景, 与其分子结构、 动力学行为以及与客体分子的相互作用密切相关. 固体核磁共振(NMR)能提供原子水平的结构距离信息, 能从多个时间尺度反映分子动力学行为, 能通过极化转移揭示主客体相互作用. 本文综述了近年来先进的固体核磁共振方法在研究MOFs的结构、 动力学行为以及主客体相互作用等方面的研究进展. 多核、 多维固体NMR可给出MOFs材料的金属中心以及有机配体的局部配位状态, 变温固体NMR可以反映MOFs的分子柔性以及有机配体在不同温度下的运动模式及速率. 固体NMR还可用来研究MOFs与吸附客体分子(如甲烷、 二氧化碳等)之间的相互作用模式. 通过固体NMR技术获得的结构信息有助于人们理解MOFs材料的构效关系, 并为合理设计新型的MOFs材料提供依据.     

Magnetic porous carbon nanocomposites derived from metal-organic frameworks as a sensing platform for DNA fluorescent detection

Metal-organic frameworks (MOFs) have emerged as very fascinating functional materials due to their tunable nature and diverse applications. In this work, we prepared a magnetic porous carbon (MPC) nanocomposite by employing iron-containing MOFs (MIL-88A) as precursors through a one-pot thermolysis method. It was found that the MPC can absorb selectively single-stranded DNA (ssDNA) probe to form MPC/ssDNA complex and subsequently quench the labelled fluorescent dye of the ssDNA probe, which is resulted from the synergetic effect of magnetic nanoparticles and carbon matrix. Upon the addition of complementary target DNA, however, the absorbed ssDNA probe could be released from MPC surface by forming double-stranded DNA with target DNA, and accompanied by the recovery of the fluorescence of ssDNA probe. Based on these findings, a sensing platform with low background signal for DNA fluorescent detection was developed. The proposed sensing platform exhibits high sensitivity with detection limit of 1 nM and excellent selectivity to specific target DNA, even single-base mismatched nucleotide can be distinguished. We envision that the presented study would provide a new perspective on the potential applications of MOF-derived nanocomposites in biomedical fields.     

Diffusion of poly (l-lactide) in activated metal organic frameworks; crystallization evidenced by ssNMR and subsequent shape memory effects

Shape-memory polymers are a class of materials that show dual or multi-shape competence. Here a solvent casting method was used to prepare composite films from Cu-BTC crystals in poly (l-lactide) (PLLA) to induce crystallization leading to a marked shape memory effect (SME). Extensive physico-chemical characterizations including solid-state NMR indicated that Cu-BTC triggered the crystallization of PLLA for ensuring the entropy needed for the shape memory behavior. The diffusion of polymeric chains inside pores of activated Cu-BTCs ensured interactions which increases the crystallinity as both simulation and experimental results show. Moreover, the segregation of Cu-BTC crystallites to small copper oxide particles due to the activation increases the volume of the crystalline region observed by microscopic images. We compared the identical features of composite prepared in the same method in where small molecule was encapsulated inside Cu-BTC with PLLA/5 wt% Cu-BTC; we were able to show that having the sharp transition of elastic to rubbery state in the vicinity of cold crystallization temperature in PLLA/5 wt% Cu-BTC provides Cu-BTC crystallites to act as netpoints. Moreover, the reinforcement accompanied by increased toughness demonstrates the combination of improved mechanical properties as well as SME of polymers which rarely have attained.     

In situ synthesis of Cu-BTC (HKUST-1) in macro-/mesoporous silica monoliths for continuous flow catalysis

The metal-organic framework Cu-BTC has been successfully synthesized as nanoparticles inside the mesopores of silica monoliths featuring a homogeneous macropore network enabling the use of Cu-BTC for continuous flow applications in liquid phase with low pressure drop. High productivity was reached with this catalyst for the Friedl?nder reaction.     

Sub-5 nm porous polymer decoration toward superhydrophobic MOFs with enhanced stability and processability

Metal-organic frameworks(MOFs) show great potential for various applications, but many of them suffer from the drawbacks of hydrolysis propensity and poor processability. Herein, we employ polymers of intrinsic microporosity(PIMs) with hydrophobic pores to decorate MOFs toward substantially improved water stability and shapeability. Through simple PIM-1 decoration, the sub-5 nm polymer layers can be uniformly deposited on MOF surfaces with almost no deterioration in porosity. Owing to the existe...     

Pore‐Surface Engineering by Decorating Metal‐Oxo Nodes with Phenylsilane to Give Versatile Super‐Hydrophobic Metal–Organic Frameworks (MOFs)

Hydrophobization of metal‐organic frameworks (MOFs) is important to push forward their practical use and thus has attracted increasing interest. In contrast to the previous reports, which mainly focused on the modification of organic ligands in MOFs, herein, we reported a novel strategy to decorate the metal‐oxo nodes of MOFs with phenylsilane to afford super‐hydrophobic NH₂‐UiO‐66(Zr), which shows highly improved base resistance and holds great promise in versatile applications, such as organic/water separation, self‐cleaning, and liquid‐marble fabrication. This work demonstrates the first attempt at metal‐oxo node modification for super‐hydrophobic MOFs, advancing a new concept in the design of MOFs with controlled wettability for practical applications.     

High Performance Composite Photocatalysts based on Metal Organic Framework as the Modifier

Photocatalysis attracts increasing attention because of the deteriorating environment pollution. Metal organic frameworks (MOFs) is deemed as one kind of promising modifiers to improve the photocatalytic performance of traditional semiconductors by their large BET areas. In this study, reduced graphene oxide (RGO) and Cu-BTC are utilized to decorate TiO₂ to enhance the corresponding photoactivity. Morphology of the as-prepared composite is detected by SEM and XRD curve, while the UV- and visible-light activities are estimated by the decomposition of various dyes. The specific functions of Cu-BTC and RGO are revealed by analysing the adsorption capacity, lifetime of the photoinduced electrons and the EPR profiles. The resulting Cu-BTC-RGO/TiO₂ samples display outstanding photocatalytic properties, which are much better than that of the pure TiO₂ and RGO/TiO₂ samples because of the synergy between these components. Lastly, the recycle using stability and the influence from the preparation process of the composite photocatalysts are discussed.