A biofuel cell with electrochemically switchable and tunable power output

An electroswitchable and tunable biofuel cell based on the biocatalyzed oxidation of glucose is described. The anode consists of a Cu(2+)-poly(acrylic acid) film on which the redox-relay pyrroloquinoline quinone (PQQ) and the flavin adenine dinucleotide (FAD) cofactor are covalently linked. Apo-glucose oxidase is reconstituted on the FAD sites to yield the glucose oxidase (GOx)-functionalized electrode. The cathode consists of a Cu(2+)-poly(acrylic acid) film that provides the functional interface for the covalent linkage of cytochrome c (Cyt c) that is further linked to cytochrome oxidase (COx). Electrochemical reduction of the Cu(2+)-poly(acrylic acid) films (applied potential -0.5 V vs SCE) associated with the anode and cathode yields the conductive Cu(0)-poly(acrylic acid) matrixes that electrically contact the GOx-electrode and the COx/Cyt c-electrode, respectively. The short-circuit current and open-circuit voltage of the biofuel cell correspond to 105 microA (current density ca. 550 microA cm(-2)) and 120 mV, respectively, and the maximum extracted power from the cell is 4.3 microW at an external loading resistance of 1 kOmega. The electrochemical oxidation of the polymer films associated with the electrodes (applied potential 0.5 V) yields the nonconductive Cu(2+)-poly(acrylic acid) films that completely block the biofuel cell operation. By the cyclic electrochemical reduction and oxidation of the polymer films associated with the anode and cathode between the Cu(0)-poly(acrylic acid) and Cu(2+)-poly(acrylic acid) states, the biofuel cell performance is reversibly switched between "ON" and "OFF" states, respectively. The electrochemical reduction of the Cu(2+)-polymer film to the Cu(0)-polymer film is a slow process (ca. 1000 s) because the formation and aggregation of the Cu(0)-clusters requires the migration of Cu(2+) ions in the polymer film and their reduction at conductive sites. The slow reduction of the Cu(2+)-polymer films allows for the controlling of the content of conductive domains in the films and the tuning of the output power of the biofuel cell. The electron-transfer resistances of the cathodic and anodic processes were characterized by impedance spectroscopy. Also, the overall resistances of the biofuel cell generated by the time-dependent electrochemical reduction process were followed by impedance spectroscopy and correlated with the internal resistances of the cell upon its operation.     

Development of Reasonably Stable Chitosan Based Proton Exchange Membranes for a Glucose Oxidase Based Enzymatic Biofuel Cell

Chitosan based reasonably stable membranes were prepared as polymeric electrolyte and separator for enzymatic fuel cell applications. Glucose oxidase (GOx) bioanode centered biofuel cell with the developed chitosan membranes performed much better in stability with high current densities than that of the biofuel cell utilizing a 125 μ‐thick perfluorosulfonic acid‐type membrane (i. e. Nafion® 115). Proposed chitosan membrane structural stability was enhanced by employing cellulosic support materials and chemical crosslinking. The effects of pH, buffer type, buffer concentration, temperature on the manufactured chitosan membranes along with the biofuel cell system were investigated. The biofuel cell operation parameters were optimized for the current density and stability aspects and more than 3 mA cm^?2 current density was acquired from the cell at optimum conditions. Operational half‐life of the chitosan membrane was found as higher than the half‐life of the GOx immobilized bioanode. Therefore, this result indicates that chitosan membrane structural stability was not a limiting issue for the biofuel cell lifespan.     

Enzymatic electrodes nanostructured with functionalized carbon nanotubes for biofuel cell applications

Nanostructured bioelectrodes were designed and assembled into a biofuel cell with no separating membrane. The glassy carbon electrodes were modified with mediator-functionalized carbon nanotubes. Ferrocene (Fc) and 2,2′-azino-bis (3-ethylbenzothiazoline-6-sulfonate) diammonium salt (ABTS) bound chemically to the carbon nanotubes were found useful as mediators of the enzyme catalyzed electrode processes. Glucose oxidase from Aspergillus niger AM-11 and laccase from Cerrena unicolor C-139 were incorporated in a liquid-crystalline matrix-monoolein cubic phase. The carbon nanotubes–nanostructured electrode surface was covered with the cubic phase film containing the enzyme and acted as the catalytic surface for the oxidation of glucose and reduction of oxygen. Thanks to the mediating role of derivatized nanotubes the catalysis was almost ten times more efficient than on the GCE electrodes: catalytic current of glucose oxidation was 1 mA cm⁻² and oxygen reduction current exceeded 0.6 mA cm⁻². The open circuit voltage of the biofuel cell was 0.43 V. Application of carbon nanotubes increased the maximum power output of the constructed biofuel cell to 100 μW cm⁻² without stirring of the solution which was ca. 100 times more efficient than using the same bioelectrodes without nanotubes on the electrode surface.     

A glucose/hydrogen peroxide biofuel cell that uses oxidase and peroxidase as catalysts by composite bulk-modified bioelectrodes based on a solid binding matrix

An improved composite bulk-modified bioelectrode setup based on a solid binding matrix (SBM) has been used to develop a glucose/hydrogen peroxide biofuel cell. Fuel is combined through a catalytically promoted reaction with oxygen into and oxidized species and electricity. The present work explores the feasibility of a sugar-feed biofuel cell based on SBM technology. The biofuel cell that utilizes mediators as electron transporters from the glucose oxidation pathway of the enzyme directly to electrodes is considered in this work. The anode was a glucose oxidase (GOx, EC 1.1.3.4)/ferrocene-modified SBM/graphite composite electrode. The cathode was a horseradish peroxidase (HRP, EC 1.11.1.7)/ferrocene-modified SBM/graphite composite electrode. The composite transducer material was layered on a wide polymeric surface to obtain the biomodified electrodic elements, anodes and cathodes and were assembled into a biofuel cell using glucose and H(2)O(2) as the fuel substrate and the oxidizer. The electrochemical properties and the characteristics of single composite bioelectrodes are described. The open-circuit voltage of the cell was 0.22 V, and the power output of the cell was 0.15 microW/cm(2) at 0.021 V. The biofuel cell proved to be stable for an extended period of continuous work (30 days). The reproducibility of the biotransducers fabrication was also investigated. In addition, an application of presented biofuel cell, e.g. the use of hydrolyzed corn syrup as renewable biofuels, was discussed.     

Engineering of glucose oxidase for direct electron transfer via site-specific gold nanoparticle conjugation

Optimizing the electrical communication between enzymes and electrodes is critical in the development of biosensors, enzymatic biofuel cells, and other bioelectrocatalytic applications. One approach to address this limitation is the attachment of redox mediators or relays to the enzymes. Here we report a simple genetic modification of a glucose oxidase enzyme to display a free thiol group near its active site. This facilitates the site-specific attachment of a maleimide-modified gold nanoparticle to the enzyme, which enables direct electrical communication between the conjugated enzyme and an electrode. Glucose oxidase is of particular interest in biofuel cell and biosensor applications, and the approach of "prewiring" enzyme conjugates in a site-specific manner will be valuable in the continued development of these systems.     

Electrochemical Activity Studies of Glucose Oxidase (GOx)‐Based and Pyranose Oxidase (POx)‐Based Electrodes in Mesoporous Carbon: Toward Biosensor and Biofuel Cell Applications

A simple study using a fixed amount of mesoporous carbon (MSU‐F‐C) was performed for the comparison of pyranose oxidase (POx) and glucose oxidase (GOx) in their electrochemical performance under biosensor and biofuel cell operating modes. Even though the ratio of POx to GOx in the glucose oxidation activity per unit weight of MSU‐F‐C was 0.35, the ratios of POx to GOx in sensitivity and power density were reversed to be 6.2 and 1.4, respectively. POx with broad substrate specificity and an option of large scale production using recombinant E. coli has a great potential for various electrochemical applications, including biofuel cells.     

Biofuel Cell Operating in Vivo in Rat

Biocatalytic electrodes made of buckypaper were modified with PQQ‐dependent glucose dehydrogenase on the anode and with laccase on the cathode. The enzyme modified electrodes were assembled in a biofuel cell which was first characterized in human serum solution and then the electrodes were placed onto exposed rat cremaster tissue. Glucose and oxygen dissolved in blood were used as the fuel and oxidizer, respectively, for the implanted biofuel cell operation. The steady‐state open circuitry voltage of 140±30 mV and short circuitry current of 10±3 µA (current density ca. 5 µA cm^?2 based on the geometrical electrode area of 2 cm²) were achieved in the in vivo operating biofuel cell. Future applications of implanted biofuel cells for powering of biomedical and sensor devices are discussed.     

Conducting Polymer Enzyme Alloys: Electromaterials Exhibiting Direct Electron Transfer

Glucose oxidase (GOx) is an important enzyme with great potential application for enzymatic sensing of glucose, in implantable biofuel cells for powering of medical devices in vivo and for large‐scale biofuel cells for distributed energy generation. For these applications, immobilisation of GOx and direct transfer of electrons from the enzyme to an electrode material is required. This paper describes synthesis of conducting polymer (CP) structures in which GOx has been entrained such that direct electron transfer is possible between GOx and the CP. CP/enzyme composites prepared by other means show no evidence of such “wiring”. These materials therefore show promise for mediator‐less electronic connection of GOx into easily produced electrodes for biosensing or biofuel cell applications.

     

A Membraneless Glucose/O2 Biofuel Cell Based on Pd Aerogels

In this study, we introduce the first membraneless glucose/O₂ biofuel cell using Pd‐based aerogels as electrode materials. The bioanode was fabricated with a coimmobilized mediator and glucose oxidase for the oxidation of glucose, in which ferrocenecarboxylic acid was integrated into a three‐dimensional porous beta‐cyclodextrin‐modified Pd aerogel to mediate the bioelectrocatalytic reaction. Bilirubin oxidase and Pd–Pt alloy aerogel were confined to an electrode surface, which realized the direct bioelectrocatalytic function for the reduction of O₂ to H₂O with a synergetic effect at the biocathode. By employing these two bioelectrodes, the assembled glucose/O₂ biofuel cell showed a maximum power output of 20 μW cm^?2 at 0.25 V.     

A Microelectronic Sensor Device Powered by a Small Implantable Biofuel Cell

Biocatalytic buckypaper electrodes modified with pyrroloquinoline quinone (PQQ)-dependent glucose dehydrogenase and bilirubin oxidase for glucose oxidation and oxygen reduction, respectively, were prepared for their use in a biofuel cell. A small (millimeter-scale; 2×3×2 mm³) enzyme-based biofuel cell was tested in a model glucose-containing aqueous solution, in human serum, and as an implanted device in a living gray garden slug (Deroceras reticulatum), producing electrical power in the range of 2–10 μW (depending on the glucose source). A microelectronic temperature-sensing device equipped with a rechargeable supercapacitor, internal data memory and wireless data downloading capability was specifically designed for activation by the biofuel cell. The power management circuit in the device allowed the optimized use of the power provided by the biofuel cell dependent on the sensor operation activity. The whole system (power-producing biofuel cell and power-consuming sensor) operated autonomously by extracting electrical energy from the available environmental source, as exemplified by extracting power from the glucose-containing hemolymph (blood substituting biofluid) in the slug to power the complete temperature sensor system and read out data wirelessly. Other sensor systems operating autonomously in remote locations based on the concept illustrated here are envisaged for monitoring different environmental conditions or can be specially designed for homeland security applications, particularly in detecting bioterrorism threats.     

Development of a biofuel cell using glucose-oxidase- and bilirubin-oxidase-based electrodes

Biofuel cells have a tremendous opportunity to provide much higher energy densities and smaller footprints than batteries for powering implantable medical devices, leading to less intrusive implantable devices with longer lifetimes. This paper introduces biofuel cell anode and cathode designs based on mediated glucose oxidation by glucose oxidase and oxygen reduction by bilirubin oxidase, respectively. We report here the progress toward the development of components for biofuel cells working in physiological conditions. We have investigated enzymatic electrode formulations that have the potential to achieve higher current densities and longer stability of the electrodes: (a) high surface area by the use of multiscale carbon materials, (b) immobilization of redox mediator on the electrode surface, and (c) use of a protective biocompatible polymer coating. Part of this work was presented at the 213th Electrochemical Society Meeting as a poster     

A glucose/O2 biofuel cell base on nanographene platelet-modified electrodes

This study demonstrated a novel nanographene platelets (NGPs)-based glucose/O₂ biofuel cell (BFC) with the glucose oxidase (GOD) as the anodic biocatalysts and the laccase as the cathodic biocatalysts. The GOD/NGPs-modified electrode exhibited good catalytic activity towards glucose oxidation and the laccase/NGPs-modified electrode exhibited good catalytic activity towards O₂ electroreduction. The maximum power density was ca. 57.8 μW cm^? 2 for the assembled glucose/O₂ NGPs-based BFC. These results indicated that the NGPs were very useful for the future development of novel carbon-based nanomaterials BFC device.     

A biofuel cell based on pyrroloquinoline quinone and microperoxidase-11 monolayer-functionalized electrodes

A pyrroloquinoline quinone (PQQ) monolayer-functionalized-Au-electrode and a microperoxidase-11 (MP-11)-modified Au-electrode are used as catalytic anode and cathode in a biofuel cell element, respectively. The cathodic oxidizer is H₂O₂ whereas the anodic fuel-substrate is 1,4-dihydronicotinamide adenine dinucleotide, NADH. The PQQ-monolayer electrode catalyzes the oxidation of NADH in the presence of Ca²⁺ ions. The MP-11-functionalized electrode catalyzes the reduction of H₂O₂. The biofuel cell generates an open-circuit voltage, V_oc, of ca. 320 mV and a short-circuit current density, I_sc, of ca. 30 μA·cm⁻². The maximum electrical power, W_max, extracted from the cell is 8 μW at an external load of 3 kΩ. The fill factor of the biofuel cell, f=W_max·I_sc⁻¹·V_oc⁻¹, is ca. 25%.     

全酶型乙醇/氧气生物燃料电池的构筑及性能研究

本文以乙醇脱氢酶（ADH）和胆红素氧化酶（BOD）为生物催化剂,以碳纳米管为电极材料,构筑了全酶型乙醇/氧气生物燃料电池. 将乙醇脱氢酶负载于单壁碳纳米管（SWCNT）上,采用亚甲基绿（MG）为NADH的电化学催化剂,实现乙醇的生物电化学催化氧化,制备了生物燃料电池ADH/MG/SWCNT/GC的电极（阳极）. 同时,将胆红素氧化酶固定于单壁碳纳米管上,通过其直接电子转移,实现了氧气的生物电化学催化还原,制得生物燃料电池的BOD/SWCNT/GC阴极. 据此构筑了全酶型的无膜生物燃料电池,在空气饱和40 mmol·L^-1乙醇磷酸缓冲溶液中该电池开路电压为0.53 V,最大输出功率密度为11 μW·cm^-2. 以商品化伏特酒作为燃料,该生物燃料电池最大输出功率为3.7 μW·cm^-2.     

Concentric glucose/O2 biofuel cell

A concentric glucose/O₂ biofuel cell has been developed. The device is constituted of two carbon tubular electrodes, one in the other, and combines glucose electrooxidation at the anode and oxygen electroreduction at the cathode. The anodic catalyst is glucose oxidase co-immobilized with the mediator 8-hydroxyquinoline-5-sulfonic acid hydrate, and the cathodic catalyst is bilirubin oxidase co-immobilized with the mediator 2,2′-azinobis (3-ethylbenzothiazoline-6-sulfonate) diammonium salt. Both enzymes and mediators are entrapped at the surface of the tubular electrodes by an electrogenerated polypyrrole polymer. The originality of the concentric configuration is to compartmentalize the anode and cathode electrodes and to supply dissolved oxygen separate from the electrolyte in order to avoid secondary reactions. The dissolved oxygen circulates through the inside of the cathode tube and diffuses from the inner to the external surface of the tube to react directly with the immobilized bilirubin oxidase. The assembled biofuel cell is studied at 37 °C in phosphate buffer pH 7.4. We show the influence of the thickness of the polypyrrole polymer on the electrochemical activity of the biocathodes. We also demonstrate the effect of the chemical reticulation of the enzymes by glutaraldehyde within the polymer on the performances of the bioelectrodes. The maximum power density delivered by the assembled glucose/O₂ biofuel cell reaches 42 μW cm⁻², evaluated from the geometric area of the electrodes, at a cell voltage of 0.30 V with 10 mM glucose. The results demonstrate that the concentric design of the BFC based on compartmented electrodes is a promising architecture for further development of micro electronic devices.     

Characteristics of a miniature compartment-less glucose-O2 biofuel cell and its operation in a living plant

We report the temperature, pH, glucose concentration, NaCl concentration, and operating atmosphere dependence of the power output of a compartment-less miniature glucose-O(2) biofuel cell, comprised only of two bioelectrocatalyst-coated carbon fibers, each of 7 micro m diameter and 2 cm length (Mano, N.; Mao, F.; Heller, A. J. Am. Chem. Soc. 2002, 124, 12962). The bioelectrocatalyst of the anode consists of glucose oxidase from Aspergillus niger electrically "wired" by polymer I, having a redox potential of -0.19 V vs Ag/AgCl. That of the cathode consists of bilirubin oxidase from Trachyderma tsunodae "wired" by polymer II having a redox potential of +0.36 V vs Ag/AgCl (Mano, N.; Kim, H.-H.; Zhang, Y.; Heller, A. J. Am. Chem. Soc. 2002, 124, 6480. Mano, N.; Kim, H.-H.; Heller, A. J. Phys. Chem. B 2002, 106, 8842). Implantation of the fibers in the grape leads to an operating biofuel cell producing 2.4 micro W at 0.52 V.     

Biocatalytic anode for glucose oxidation utilizing carbon nanotubes for direct electron transfer with glucose oxidase

Covalently linked layers of glucose oxidase, single-wall carbon nanotubes and poly-l-lysine on pyrolytic graphite resulted in a stable biofuel cell anode featuring direct electron transfer from the enzyme. Catalytic response observed upon addition of glucose was due to electrochemical oxidation of FADH₂ under aerobic conditions. The electrode potential depended on glucose concentration. This system has essential attributes of an anode in a mediator-free biocatalytic fuel cell.     

Immobilization of hydroquinone through a spacer to polymer grafted on carbon black for a high-surface-area biofuel cell electrode

We immobilized hydroquinone through a spacer to polymer grafted on carbon black and achieved a high-surface-area biofuel cell electrode. Quinone compounds are well-known to transfer electrons in the respiratory chain and have been considered prospective mediators in biofuel cells because of their relatively negative redox potentials. Evaluation of three different spacer arms tethering hydroquinone to linear polymers revealed that only the hydrophilic and flexible di(ethylene oxide) spacer made it possible for immobilized hydroquinone to transfer electrons from glucose oxidase (GOD) to an electrode; direct immobilization and an alkyl spacer did not. The electrode comprising hydroquinone immobilized through di(ethylene oxide) spacer to polymer grafted on carbon black transferred electrons from GOD to the electrode. The potential at which an anodic current began to increase was more negative by about 0.2 V than that for a vinylferrocene-mediated electrode, while the increase in the anodic current density was of the same order.     

Study of direct electron transfer and enzyme activity of glucose oxidase on graphene surface

In recent years, graphene has been widely used as a high performance two-dimensional material in the development of biosensors and biofuel cells for facilitating direct electron transfer (DET) of glucose oxidase (GOx). However, almost all of these reports perform experiments in the presence of oxygen (a natural mediator of oxidase) and whether the GOx with DET property retained their catalytic activity in the absence of mediators has not been studied in detail so far. In this paper, we investigated the DET property and enzyme activity of GOx on graphene surface without and with mediators. Experimental results showed that the biosensor had no response to glucose in mediator-free solutions, even though the DET of GOx was observed, indicating that the GOx with DET property lacked enzymatically catalytic activity. However, in the presence of mediators, the biosensor showed sensitive response to glucose, illustrating that the mediated enzymatic oxidation of glucose occurred, which can be attributed to the catalytically active GOx without DET capability. These results suggest that DET property and enzyme catalytic activity cannot occur on the same GOx simultaneously. Therefore, keeping enzyme activity and DET of GOx at the same time is still a major challenge for biosensor and biofuel cell researches.     

Preparation of an Electrode Modified with an Electropolymerized Film as a Mediator of NADH Oxidation and Its Application in an Ethanol/O2 Biofuel Cell

This paper reports a novel mediator for the oxidation of β‐nicotinamide adenine dinucleotide (NAD⁺/NADH), an electropolymeric film (pAPRu) of [Ru(NH₂‐phen)₃]²⁺. A pAPRu‐modified electrode was prepared via electropolymerization and exhibited catalytic activity toward the electrochemical oxidation of NADH due to the imine moieties of pAPRu. The electrochemical oxidation of ethanol was observed using an alcohol dehydrogenase (ADH)‐immobilized electrode. A compartmentless ethanol/O₂ biofuel cell composed of an ADH anode and a bilirubin oxidase cathode was constructed. The maximum current density and the maximum power density of the biofuel cell were 190 µA cm^?2 and 31 µW cm^?2 (at 0.29 V), respectively.