BEA/MOR两相共生分子筛的酸性及其催化性能

 用NH3-TPD方法研究了相同硅铝比不同相组成的BEA/MOR (β沸石与丝光沸石两相共生分子筛)样品的酸性,并考察了其对甲醇脱水制二甲醚反应的催化性能. 结果表明,不同相组成的共生分子筛样品的NH3-TPD谱中均出现两个NH3脱附峰,分别对应于NH3在沸石骨架中弱酸中心和强酸中心上的脱附. BEA/MOR的高温脱附峰温与其丝光沸石含量呈火山形曲线关系,而β沸石与丝光沸石机械混合物的高温脱附峰温与丝光沸石含量呈线性关系; 当丝光沸石相含量超过50%时, BEA/MOR强酸强度明显高于机械混合物,含丝光沸石65%的BEA/MOR样品的强酸强度最强,这表明共生分子筛与机械混合物间存在明显的区别. 用于催化甲醇脱水制二甲醚反应时, BEA/MOR样品上甲醇转化率与丝光沸石含量也呈火山形曲线关系,而机械混合物上甲醇的转化率与丝光沸石含量呈线性关系. 丝光沸石含量超过40%的BEA/MOR样品的催化活性都高于HM, 含丝光沸石65%的BEA/MOR样品活性最高. 硅铝比为11的HM虽然初活性高,但反应60 h后即很快失活,而硅铝比为53的HBEA/MOR初活性稍低,但其稳定性好.     

Synthesis of Hierarchical MOR-Type Zeolites with Improved Catalytic Properties

Hierarchical MOR-type zeolites were synthesized in the presence of hexadecyltrimethylammonium bromide (CTAB) as a porogen agent. XRD proved that the concentration of CTAB in the synthesis medium plays an essential role in forming pure hierarchical MOR-type material. Above a CTAB concentration of 0.04 mol·L⁻¹, amorphous materials are observed. These hierarchical mordenite possess a higher porous volume compared to its counterpart conventional micrometer crystals. Nitrogen sorption showed the presence of mesoporosity for all mordenite samples synthesized in the presence of CTAB. The creation of mesopores due to the presence of CTAB in the synthesis medium does not occur at the expense of zeolite micropores. In addition, mesoporous volume and BET surface seem to increase upon the increase of CTAB concentration in the synthesis medium. The Si/Al ratio of the zeolite framework can be increased from 5.5 to 9.1 by halving the aluminum content present in the synthesis gel. These synthesized hierarchical MOR-type zeolites possess an improved catalytic activity for n-hexane cracking compared to large zeolite crystals obtained in the absence of CTAB.     

核壳MFI/CHA分子筛的合成及催化性能

采用二次生长法(外延法)在ZSM-5(MFI型)晶体颗粒表面外延生长SAPO-34(CHA型)磷酸硅铝分子筛壳层,合成了MFI/CHA型核壳分子筛材料。并利用X射线衍射(XRD)、扫描电镜(SEM)、能量色散射线光谱(EDS)和傅里叶变换红外(FTIR)光谱对其进行了表征。结果表明,核相ZSM-5的预处理步骤对于成功合成此核壳型分子筛材料十分关键。通过研究晶化温度和晶化时间对MFI/CHA核壳型沸石分子筛合成的影响推测出MFI/CHA壳层生长的晶化机理,并考察在甲醇芳构化中的择形催化作用。     

MFI/BEA双沸石复合物的合成及其在甲烷选择性还原NOx中的应用

以合成的β沸石固液混合物作为ZSM-5沸石的部分原料制备了含有ZSM-5和β沸石的双相沸石复合物MFI/BEA。采用XRD,FTIR,吡啶红外,NH₃-TPD,TEM,SEM和氮吸附-脱附等对合成的材料进行了表征。结果表明后合成的ZSM-5沸石在β沸石内部孕育生长,MFI/BEA双沸石复合物中两相沸石的组成比例可以通过控制第二步晶化时间来进行有效调控;与单一的Co-ZSM-5或Co-β相比,通过离子交换法制备的Co-基复合催化剂Co-MFI/BEA在富氧条件下甲烷选择催化还原NO反应中具有高活性和高的稳定性,并且表现出较好的抗SO₂毒化性能和良好的可逆性。     

Bridging Dealumination and Desilication for the Synthesis of Hierarchical MFI Zeolites

The rational design of zeolite‐based catalysts calls for flexible tailoring of porosity and acidity beyond micropore dimension. To date, dealumination has been applied extensively as an industrial technology for the tailoring of zeolite in micropore dimension, whereas desilication has separately shown its potentials in the creation of mesoporosities. The free coupling of dealumination with desilication will bridge the tailoring at micro/mesopore dimensions; however, such coupling has been prevailingly confirmed as an impossible mission. In this work, a consecutive dealumination–desilication process enables the introduction of uniform intracrystalline mesopores (4–6 nm) into the microporous Al‐rich zeolites. The decisive impacts of steaming step have been firstly discovered. These findings revitalize the functions of dealumination in porosity tailoring, and stimulate the pursuit of new methods for the tailoring of industrially relevant Al‐rich zeolites.     

MFI/BEA双沸石复合物的合成及其在甲烷选择性还原NOx中的应用

以合成的β沸石固液混合物作为ZSM-5沸石的部分原料制备了含有ZSM-5和β沸石的双相沸石复合物MFI/BEA。采用XRD, FTIR, 吡啶红外, NH₃-TPD, TEM, SEM和氮吸附-脱附等对合成的材料进行了表征。结果表明后合成的ZSM-5沸石在β沸石内部孕育生长, MFI/BEA双沸石复合物中两相沸石的组成比例可以通过控制第二步晶化时间来进行有效调控;与单一的Co-ZSM-5或Co-β相比, 通过离子交换法制备的Co-基复合催化剂Co-MFI/BEA在富氧条件下甲烷选择催化还原NO反应中具有高活性和高的稳定性, 并且表现出较好的抗SO₂毒化性能和良好的可逆性。     

Possibilities of Microporous and Hierarchical MFI Zeolites in the Synthesis of Nitrogen Heterocyclic Compounds

Kinetics and Catalysis - The catalytic properties of a microporous H-ZSM-5 zeolite and a granular hierarchical H-ZSM-5h zeolite in the synthesis of basic pyridines and quinolines have been studied....     

Tailoring Hierarchical Zeolites with Designed Cationic Surfactants and Their High Catalytic Performance

Three hierarchical porous zeolites (H‐*BEA, H‐MTW, and H‐*MRE) were successfully synthesized with the assistance of designed cationic surfactants under hydrothermal synthesis conditions. The as‐synthesized zeolite samples can be easily regulated by changing the number of long hydrophobic n ‐alkyl chains. Also, we investigated the relationship between the length of the surfactant and the formation of the microporous structure of the zeolite. Furthermore, the alkylation of benzene with propene was performed as a probe reaction to evaluate the catalytic performance of the synthesized hierarchical zeolites. The resulting materials were characterized by using a complementary combination of techniques, that is, X‐ray powder diffraction, N₂ adsorption–desorption isotherms, scanning electron microscopy, transmission electron microscopy, Fourier transform IR spectroscopy, ²⁸Si and ²⁷Al MAS NMR spectroscopies, thermogravimetric analysis, and computer simulation. These analysis results indicated that quaternary ammonium surfactants acted as organic structure‐directing agents (OSDAs) in the formation of these hierarchical zeolite samples, whether the surfactant had long hydrophobic tail groups or not. The simulation results indicated that the organic molecules with no long hydrophobic chain could lead to the synthesis of zeolite through charge control, and the hydrophobic molecules with long hydrophobic chains could form zeolites through orbital control. These hierarchical zeolites showed improved catalytic activity towards the industrially relevant alkylation of benzene with propene compared with conventional zeolites with the same frameworks. More importantly, the success of using quaternary ammonium surfactants with no hydrophobic n ‐alkyl tail group in the synthesis of hierarchically structured mesoporous zeolites provides a new pathway for the synthesis of hierarchical porous materials by a soft‐templating method.     

Efficient One-pot Zeolite Synthesis Protocol from the Metastable *BEA to MTW Topology and Its Impact on the Methanol-to-Hydrocarbons Process

The inter-zeolite conversion is a method to convert one meta-stable zeolite to a thermodynamically stable zeolite. Despite the enormous interest, this method is yet to be popularized or standardized in the zeolite community. Intending to provide more insights into hydrothermal conversions from one zeolite to another, this work developed a novel one-pot and flexible synthetic protocol to efficiently obtain the meta-stable *BEA topology and its derived MTW topology by varying the hydrothermal crystallization time. This inter-zeolite conversion process led to changes in the zeolite framework and modified physicochemical properties during the process. Such a transformation was feasible by forming hierarchical zeolite phases sharing a similar “mtw”-based common building units, possibly driving such conversion. The structure-reactivity relationship of four different zeolite materials, synthesized from this one-pot inter-zeolite conversion method, was established concerning their performance in the methanol-to-hydrocarbon (MTH) process, which has been well supported by operando UV-vis diffuse reflectance spectroscopic study coupled with online mass spectrometry and solid-state NMR spectroscopy. As a result, the pathway to synthesize various target zeolites from an identical initial synthesis gel with desired physicochemical properties has been scrutinized.     

Diffusion and Adsorption of Benzene and Propylene in MFI,MWW and BEA Zeolites:Molecular Dynamics and Grand Canonical Monte Carlo Simulations

The diffusion and adsorption behaviors of benzene and propylene in zeolites MFI, MWW and BEA have been studied by molecular dynamics(MD) and grand canonical Monte Carlo(GCMC) simulations. The diffusion coefficients of benzene and propylene in MFI, MWW and BEA zeolites were calculated by simulating the mean-square displacements(MSD) at 298 and 600 K. Benzene and propylene showed the different adsorption rules in the channels of the three zeolites. For propylene, the molecular loadings decreased in the order:...     

含氮FAU分子筛的制备、表征及碱催化反应性能

利用脱水氮化法制备了含氮HY分子筛,氮化后分子筛的结晶度和比表面积均得到较好保持.由于氮原子的电负性低于氧原子,氮原子取代氧原子进入HY分子筛的骨架,使其Lewis碱性得到增强.利用氨气吸附红外光谱、二氧化碳吸附红外光谱与二氧化碳程序升温脱附方法对氮化前后的分子筛进行表征.结果表明氮化后HY分子筛的L酸中心数量有所降低,B酸中心数量有所增加,同时生成新的碱性中心.由于新碱性中心的引入,含氮HY分子筛在Knoevenagel缩合碱性探针反应中表现出优异的活性.     

形貌、晶粒大小不同的ZSM-5分子筛的表征及催化性能的研究

对3种不同形貌、晶粒大小的ZSM—5分子筛催化剂进行了表征和催化性能的研究．用XRD、SEM和NH3—TPD等方法对ZSM—5分子筛进行表征，结果表明小品粒分子筛的结晶度优于大晶粒分子筛，其酸性随着晶粒的减小而增强．对于MTG反应，ZSM—5分子筛酸性、晶粒大小和晶体形貌等因素对其催化活性产生显著影响．小晶粒的ZSM—5分子筛更有利于C5 和C9 的生成，而大晶粒的ZSM—5分子筛对对二甲苯的选择性高．TG结果表明ZSM—5分子筛上积炭覆盖酸性中心是导致催化失活的主要因素．     

不同超稳Y沸石的酸性质及其催化性能

用NH_3-TPD、FTIR和脉冲微反技术,以正庚烷.正十六烷和α-甲基萘三种探针反应研究了不同超稳化方法对Y沸石酸性质和催化性能的影响,并与各超稳Y沸石的骨架铝(N_(Al))_F和非骨架铝(N_(Al))_(EF)相关联,发现,B酸和L酸量均与(N_(Al))_F有关,而与(N_(Al))_(EF)无关;除SSY外,三探针反应在USY,US-SSY和DAY上的裂解活性与(N_(Al))_F,B酸量有关,但并非线性关系,SSY的B酸量最多,酸性最强.但其活性最小.值得注意的是三探针反应的裂解活性与(N_(Al))_(EF)呈很好的线性关系,但DAY例外,它的非骨架铝含量最高,但其活性最低.对SSY和DAY的例外结果亦进行了讨论.     

Catalytic Oxidation of CO and Benzene over Metal Nanoparticles Loaded on Hierarchical MFI Zeolite

In order to obtain highly active catalytic materials for oxidation of carbon monoxide and volatile organic compounds (VOCs), monometallic platinum, copper, and palladium catalysts were prepared by using of two types of ZSM-5 zeolite as supports—parent ZSM-5 and the same one treated by HF and NH₄F buffer solution. The catalyst samples, obtained by loading of platinum, palladium, and copper on ZSM-5 zeolite treated using HF and NH₄F buffer solution, were more active in the reaction of CO and benzene oxidation compared with catalyst samples containing untreated zeolite. The presence of secondary mesoporosity played a positive role in increasing the catalytic activity due to improved reactant diffusion. The only exception was the copper catalysts in the reaction of CO oxidation, in which case the catalyst, based on untreated ZSM-5 zeolite, was more active. In this specific case, the key role is played by the oxidative state of copper species loaded on the ZSM-5 zeolites.     

乙硫醇在MFI和MOR沸石中扩散行为的分子动力学模拟

采用分子动力学方法模拟计算了乙硫醇分子在MFI和MOR两种拓扑结构沸石中的动力学性质,比较了乙硫醇不同负载量和沸石晶格原子刚性和柔性两种状态下乙硫醇分子在沸石孔道中扩散系数的大小。模拟结果表明,对于这两种沸石,负载量增加,扩散系数减小。对于MFI沸石,在刚性和柔性沸石结构的情况下,扩散系数分别为3×10－10m2/s和4×10－9m2/s;对于MOR沸石,在刚性和柔性结构的情况下,扩散系数分别为2×10－7m2/s和3×10－8m2/s。对于MFI沸石,柔性结构下的扩散系数比刚性结构下的扩散系数要大,而对于MOR却呈现出相反的行为。对比这两种沸石,MOR中的扩散系数要比MFI沸石中大,这是因为乙硫醇分子在MOR12元环中扩散更易进行所致。相互作用能的计算结果表明,MFI中交叉型和直型孔道活性位相近,MOR孔道中12元环与4元环孔道相差较大。     

NiHY型沸石的酸性-还原性及其催化性能研究

ＮｉＨＹ型沸石的酸性－还原性及其催化性能研究傅军,朱崇业,李全芝（复旦大学化学系,上海,２００４３３）关键词ＮｉＨＹ沸石,酸性,还原性,甲苯转化含镍的Ｙ型沸石既有酸功能,也有加氢－脱氢功能,是加氢裂化、临氢异构化和选择重整的优良催化剂。关于ＮｉＮａＹ...     

（K,Na）ZSM—5的酸碱性质及催化性能

采用红外光谱、程序升温脱附、原子吸收光谱、等离子光谱、Hammett指示剂非水滴定和催化活性测试等方法研究了经不同浓度的KOH溶液交换得到的(K,Na)ZSM-5的酸碱性质。结果表明,(K,Na)ZSM-5具有中等强度的L酸位(K~+,Na~+)及弱碱位(AlO_4~-或骨架O~(2-))和强碱位(OH~-).KOH浓度增大.酸性减弱,碱性增强.所得(K,Na)ZSM-5具有较高的异丙醇脱氢、脱水活性.催化性能与酸碱性密切相关.