Enhancement of magnetic resonance contrast effect using ionic magnetic clusters

Precise diagnosis by magnetic resonance imaging (MRI) requires sensitive magnetic resonance probes to detect low concentrations of magnetic substances. Ionic magnetic clusters (IMCs) as versatile magnetic probes were successfully synthesized for enhancing the magnetic resonance (MR) contrast effect as well as ensuring high water solubility. IMCs with various sizes were prepared by assembly of MNCs using cationic cetyltrimethylammonium bromide (CTAB) and anionic sodium dodecyl sulfate (SDS). To synthesize IMCs in the aqueous phase, magnetic nanocrystals in an organic solvent were assembled with CTAB and SDS using the nanoemulsion method, to fabricate cationic magnetic clusters (CMCs) and anionic magnetic clusters (AMCs), respectively. IMCs demonstrated ultrasensitivity by MR imaging and sufficient magnetic mobility under an external magnetic field.     

Adsorption of Eu(III) on iron oxide/multiwalled carbon nanotube magnetic composites

Iron oxide/multiwalled carbon nanotube magnetic composites (denoted as magnetic composites) were synthesized and characterized in detail. The magnetic composites can be separated from aqueous solution easily by using magnetic separation method. The application of magnetic composites in the removal of Eu(III) from large volumes of aqueous solutions was studied. The results indicated that the sorption of Eu(III) on the magnetic composites was strongly dependent on pH values and weakly dependent on ionic strength. The sorption of Eu(III) on the magnetic composites was mainly dominated by inner-sphere surface complexation. The linear sorption isotherms of Eu(III) suggested that Eu(III) sorption on the magnetic composites was far from saturation. The large sorption capacity and the easy magnetic separation method indicate that the magnetic composites may be a promising suitable material in nuclear waste management in future.     

Magnetic particle‐loaded polymer brushes induced by external magnetic field: A Monte Carlo simulation

The effects of applied magnetic field on the system composed of polymer brushes and magnetic particles are studied by means of Monte Carlo simulation. The direction of the applied magnetic field is chosen to be perpendicular to the substrate plane. Polymer brushes and magnetic particles are attracted to each other. The average heights of polymer brushes depend not only on the strength of applied magnetic field (H) but also on the brush grafting density (σ) and the chain length (N). The applied magnetic field influences the arrangement of magnetic particles, and in turn, the arrangement of magnetic particles affects the spatial distribution of polymer brush monomers. When the strength of the magnetic field is increased, the average height of polymer brushes will be increased accordingly. The reason is that the orientations of the magnetic moments of particles must be along the magnetic field direction, and this leads polymer brushes to rearrange along the magnetic field direction. At the same time, the chain length and the grafting density of polymer brushes have also effects on the properties of the magnetic particles, such as the magnetic particles distribution, magnetic susceptibility, and pair correlation functions. Comparisons with the experimental ones are also made, and this investigation can provide some insights into statistical properties of magnetic particle‐loaded brushes induced by external magnetic field. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 1873–1881, 2010     

Magnetic alignment study of rare-earth-containing liquid crystals

The liquid-crystalline rare-earth complexes of the type [Ln(LH)3(DOS)3]-where Ln is Tb, Dy, Ho, Er, Tm, or Yb; LH is the Schiff base N-octadecyl-4-tetradecyloxysalicylaldimine; and DOS is dodecylsulfate-exhibit a smectic A phase. Because of the presence of rare-earth ions with a large magnetic anisotropy, the smectic A phase of these liquid crystals can be easier aligned in an external magnetic field than smectic A phases of conventional liquid crystals. The magnetic anisotropy of the [Ln(LH)3(DOS)3] complexes was determined by measurement of the temperature-dependence of the magnetic susceptibility using a Faraday balance. The highest value for the magnetic anisotropy was found for the dysprosium(III) complex. The magnetic alignment of these liquid crystals was studied by time-resolved synchrotron small-angle X-ray scattering experiments. Depending on the sign of the magnetic anisotropy, the director of the liquid-crystalline molecules was aligned parallel or perpendicular to the magnetic field lines. A positive value of the magnetic anisotropy (and parallel alignment) was found for the thulium(III) and the ytterbium(III) complexes, whereas a negative value of the magnetic anisotropy (and perpendicular alignment) was observed for the terbium(III) and dysprosium(III) complexes.     

磁性氧化石墨烯/MIL-101(Cr)表面金属离子印迹聚合物制备及其对Cu(Ⅱ)和Pb(Ⅱ)选择性吸附

本文以磁性氧化石墨烯/MIL-101(Cr)复合材料为载体,以Cu(Ⅱ)和Pb(Ⅱ)模板,多巴胺(DA)为功能单体,采用表面印迹技术成功制备一种对Cu(Ⅱ)和Pb(Ⅱ)具有高选择吸附性能的磁性离子印迹聚合物。 采用傅里叶变换红外光谱、扫描电子显微镜和振动样品磁强计等技术对该磁性离子印迹聚合物的形貌、粒径大小和磁性能进行表征。 详细探讨了该磁性离子印迹聚合物对Cu(Ⅱ)和Pb(Ⅱ)的吸附动力学、等温吸附性能及吸附选择性,结果表明该磁性离子印迹聚合物对Cu(Ⅱ)和Pb(Ⅱ)最大吸附量分别为144.92和322.58 mg/g。 优化了磁固相萃取条件,该磁性离子印迹聚合物成功用于水样中微量Cu(Ⅱ)和Pb(Ⅱ)的分离和检测,Cu(Ⅱ)和Pb(Ⅱ)的回收率分别为81.99%~89.91%和81.24%~95.15%。     

Fabrication of one-dimensional Fe3O4/P(GMA-DVB) nanochains by magnetic-field-induced precipitation polymerization

One-dimensional (1D) magnetic Fe(3)O(4)/P(GMA-DVB) peapod-like nanochains have been successfully synthesized by magnetic-field-induced precipitation polymerization using Fe(3)O(4) as building blocks and P(GMA-DVB) as linker. The Fe(3)O(4) microspheres without surface modification can be arranged with the direction of the external magnetic field in a line via the dipolar interaction between Fe(3)O(4) microspheres and linked permanently via P(GMA-DVB) coating during precipitation polymerization. The length of peapod-like nanochains can be controlled by magnetic field intensity, and the thickness of polymer shell can be tuned by the amount of monomers. Magnetic measurement revealed that these 1D peapod-like nanochains showed highly magnetic sensitivity. In the presence of magnetic field, 1D magnetic Fe(3)O(4)/P(GMA-DVB) peapod-like nanochains can be oriented and aligned along the direction of external magnetic field.     

Preparation of magnetically separable N-halamine nanocomposites for the improved antibacterial application

Magnetic N-halamine nanocomposites were synthesized through the encapsulation of the magnetic silica nanoparticles with antibacterial N-halamine polymer. The as-synthesized sample was characterized by transmission electron microscopy (TEM), dynamic light scattering (DLS), Fourier transform infrared (FTIR), X-ray diffraction (XRD), X-ray photoelectron spectra (XPS), and thermogravimetric analysis (TGA). The fabricated magnetic N-halamine nanocomposites possessed enhanced antibacterial activity against both gram-positive and gram-negative bacteria compared with their bulk counterparts. The effect of chlorine content of the magnetic N-halamine nanocomposites on the antibacterial activity was investigated. The magnetic N-halamine nanocomposites also exhibited super-paramagnetic behavior and had a saturation magnetization of 4.728 emu g(-1) at room temperature, which made these nanocomposites separable magnetically after the antibacterial behavior. Performances derived from the synergism between magnetic core and antibacterial shell suggest that the magnetic N-halamine nanocomposites are qualified for antibacterial applications and separable by the aid of the external magnetic field.     

Elaboration of hydrophilic aminodextran containing submicron magnetic latex particles

Aminodextran containing submicron magnetic latex particles were prepared in two steps: (a) transformation of oil-in-water magnetic emulsion into structured magnetic latex particles via combination of seed and miniemulsion-like polymerization process and (b) immobilization (adsorption and chemical grafting) of prepared aminodextran onto negatively charged seed magnetic latex particles. The elaborated magnetic latex particles were characterized in terms of particle size, size distribution, morphology, surface charge density, chemical composition, magnetic properties, and also colloidal stability. The results showed that the morphology of the prepared seed magnetic latex is core–shell like and the cationic latex particles are hydrophilic and of high colloidal stability, irrespective of the aminodextran immobilization process.     

Tailoring of carboxyl‐decorated magnetic latex particles using seeded emulsion polymerization

In this research, submicron and carboxyl‐functionalized magnetic latex particles were elaborated by using seeded emulsion polymerization technique in presence of oil‐in‐water (o/w) magnetic emulsion as seed. The polymerization conditions were optimized in order to get well‐defined latex particles with magnetic core and polymer shell bearing carboxylic (–COOH) functionality. Starting from (o/w) magnetic emulsion as seed, synthesis process was performed by copolymerization of styrene (St) monomer with the cross‐linker divinylbenzene (DVB) in presence of 4,4′‐azobis(4‐cyanopentanoic acid) (ACPA) as a carboxyl‐bearing initiator. The prepared magnetic latex particles were first characterized in terms of particle size, chemical composition, morphology, magnetic properties, magnetic content, and colloidal stability using various techniques, e.g. particle size analyzer using dynamic light scattering (DLS) technique, Fourier transform infrared, transmission electron microscopy, vibrating sample magnetometer, thermogravimetric analysis, and zeta potential measurements as a function of pH of the dispersion media, respectively. The prepared magnetic latex particles were then used as second seed for further functionalization with methacrylic acid (MAA) in order to enhance carboxylic groups on the magnetic particle's surface. The results showed that final magnetic latex particles possessed spherical morphology with core‐shell structure and enriched carboxylic acid functionality. More importantly, they exhibited superparamagnetism with high magnetic content (58.42 wt%) and high colloidal stability, which considered as the main requirements for their application in the biomedical diagnostic domains. Copyright © 2017 John Wiley & Sons, Ltd.     

Magnetic relaxation in basic iron(III) carboxylate [Fe3O(O2CPh)6(H2O)3]ClO4·py

The magnetic properties of the antiferromagnetic basic iron(III) carboxylate [Fe(3)O(O(2)CPh)(6)(H(2)O)(3)]ClO(4)·py are studied by magnetic susceptometry and electron paramagnetic resonance spectrocopy. Ac susceptometry under moderate external magnetic fields reveals magnetic relaxation at liquid helium temperatures.     

Synthesis of Trisubstituted Ureas by a Multistep Sequence Utilizing Recyclable Magnetic Reagents and Scavengers

Unprecedented magnetic borohydride exchange (mBER), magnetic Wang aldehyde (mWang) and magnetic amine resins were prepared from highly magnetic polymer‐coated cobalt or iron nanoparticles. Microwave irradiation was used to obtain excellent degrees of functionalization (>95 %) and loadings (up to 3.0 mmol g^?1) in short reaction times of 15 min or less. A small library of ureas and thioureas was synthesized by the exclusive application of these magnetic resins. As a first step, a reductive amination of aromatic and aliphatic aldehydes was carried out with mBER. The excess of primary amine needed to complete the reaction was subsequently scavenged selectively by mWang. Simple magnetic decantation from the resins resulted in secondary amines in good to excellent yields and purities. The used magnetic resins were efficiently regenerated and reused for the next run. In a second step, the secondary amines were converted to trisubstituted (thio)ureas in excellent yields and purities by stirring with an excess of iso(thio)cyanate, which was scavenged by addition of the magnetic amine resin after completion of the reaction. The whole reaction sequence is carried out without any purification apart from magnetic decantation; moreover, conventional magnetic stirring can be used as opposed to the vortexing required for polystyrene resins.     

A magnetic Gram stain for bacterial detection

Magnetizing: Bacteria are often classified into gram-positive and gram-negative strains by staining with crystal violet (CV). The described bioorthogonal modification of CV with trans-cyclooctene (TCO) can be used to render gram-positive bacteria magnetic with tetrazine-functionalized magnetic nanoparticles (MNP-Tz). This method allows class-specific automated magnetic detection and magnetic separation.     

原位沉析法制备磁性氧化铁羟基磷灰石/壳聚糖棒材

首先通过化学沉淀法制备磁性氧化铁羟基磷灰石(Fe3O4/HA),然后以壳聚糖(CS)为基体,利用原位沉析法将Fe3O4/HA与CS复合,制得磁性Fe3O4/HA/CS复合材料.经XRD、粒径分布和PPMS测试,结果表明了Fe3O4/HA复合物的生成.系统研究了磁性Fe3O4/HA/CS棒材力学性能的影响因素,最终确定Fe3O4与HA质量比为3∶17,磁性Fe3O4/HA与CS质量比为9∶91时,棒材的力学性能最优,弯曲强度可达到87.0 MPa,弯曲模量1.57 GPa.     

镝钴铁氧磁流体的制备与性质研究(英文)

为了提高磁流体的抗氧化能力,制备了镝钴铁氧磁流体.利用古埃磁天平研究了温度对磁性和稳定性的影响;研究了稀土镝磁性能的改性、表面活性剂的表面改性,并从理论上进行了分析.利用X射线衍射仪(XRD)、透射电镜(TEM)对制得的磁粒子的组成、结构及粒径进行了分析.     

Spin dimer analysis of the anisotropic spin exchange interactions in the distorted wolframite-type oxides CuWO4, CuMoO4-III, and Cu(Mo(0.25)W0.75)O4

The distorted wolframite-type oxides CuWO4 and CuMoO4-III have a structure in which CuO4 zigzag chains, made up of cis-edge-sharing CuO6 octahedra, run along the c-direction and hence exhibit low-dimensional magnetic properties. We examined the magnetic structures of these compounds and their isostructural analogue Cu(Mo(0.25)W0.75)O4 on the basis of the spin-orbital interaction energies calculated for their spin dimers. Our study shows that these compounds consist of two-dimensional (2D) magnetic sheets defined by one superexchange (intrachain Cu-O-Cu) and three super-superexchange (interchain Cu-O.O-Cu) paths, the strongly interacting spin units of these 2D magnetic sheets are the two-leg antiferromagnetic (AFM) ladder chains running along the (a + c)-direction, and the spin arrangement between adjacent AFM ladder chains leads to spin frustration. The similarities and differences in the magnetic structures of CuWO4, CuMoO4-III, and Cu(Mo(0.25)W0.75)O4 were discussed by examining how adjacent AFM ladder chains are coupled via the superexchange paths in the 2D magnetic sheets and how adjacent 2D magnetic sheets are coupled via another superexchange paths along the c-direction. Our study reproduces the experimental finding that the magnetic unit cell is doubled along the a-axis in CuWO(4) and along the c-axis in CuMoO4-III and predicts that the magnetic unit cell should be doubled along the a- and b-axes in Cu(Mo(0.25)W0.75)O4. In the understanding of the strength of a super-superexchange interaction, the importance of the geometrical factors controlling the overlap between the tails of magnetic orbitals was pointed out.     

Differential magnetic catch and release: experimental parameters for controlled separation of magnetic nanoparticles

Differential magnetic catch and release (DMCR) has been used as a method for the purification and separation of magnetic nanoparticles. DMCR separates nanoparticles in the mobile phase by magnetic trapping of magnetic nanoparticles against the wall of an open tubular capillary wrapped between two narrowly spaced electromagnetic poles. Using Au and CoFe(2)O(4) nanoparticles as model systems, the loading capacity of the 250 μm diameter capillary is determined to be ～130 μg, and is scalable to higher quantities with larger bore capillary. Peak resolution in DMCR is externally controlled by selection of the release time (R(t)) at which the magnetic flux density is removed, however, longer capture times are shown to reduce the capture yield. In addition, the magnetic nanoparticle capture yields are observed to depend on the nanoparticle diameter, mobile phase viscosity and velocity, and applied magnetic flux. Using these optimized parameters, three samples of CoFe(2)O(4) nanoparticles whose diameters are different by less than 10 nm are separated with excellent resolution and capture yield, demonstrating the capability of DMCR for separation and purification of magnetic nanoparticles.     

Effects of structural transformations in magnetic emulsions

Structural transformations and relevant changes in the magnetic and optical properties of magnetosensitive emulsions based on magnetic fluids are experimentally studied. Peculiarities of the changes in the magnetic susceptibility of emulsions associated with the deformation of their microdroplets and the effect of phase inversion (the transformation of dispersions of magnetic droplets in nonmagnetic media into dispersions of nonmagnetic droplets in magnetic fluids) are established. Optical effects occurring in magnetic emulsions under the combined action of a shear flow and a magnetic field are studied. It is concluded that optically active composition media may be developed on the basis of magnetic fluids.     

The induced magnetic field in cyclic molecules

The response of a molecule to an applied external magnetic field can be evaluated by a graphical representation of the induced magnetic field. We have applied this technique to four representative, cyclic organic molecules, that is, to aromatic (C(6)H(6), D(6h)), anti-aromatic (C(4)H(4), D(2h)) and non-aromatic (C(4)H(8), D(4h), and C(6)H(12), D(3d)) molecules. The results show that molecules that contain a pi system possess a long-range magnetic response, while the induced magnetic field is short-range for molecules without pi systems. The induced magnetic field of aromatic molecules shields the external field. In contrast, the anti-aromatic molecules increase the applied field inside the ring. Aromatic, anti-aromatic, and non-aromatic molecules can be characterized by the appearance of the magnetic response. We also show that the magnetic response is directly connected to nucleus-independent chemical shifts (NICS).     

Sub-100 nm confinement of magnetic nanoparticles using localized magnetic field gradients

Ferromagnetic rods containing thin sections of diamagnetic metal create intense magnetic field gradients that attract and confine magnetic nanoparticles to regions of space as small as 20 nm. The rods (80 nm diameter) comprised alternating sections of CoNi ( approximately 350 nm) and Au (20-160 nm) formed by electrodeposition into porous polycarbonate membranes. Upon magnetizing the rods, large magnetic gradients (106-107 T/m) form at the boundaries between ferromagnetic and diamagnetic sections. These gradients attract and confine magnetic nanoparticles to attoliter volumes of space surrounding the rod. This method provides a new tool for generating intense, highly localized magnetic field gradients, by design, and confining magnetic nanoparticles in these gradients.     

阴离子柱撑磁性镍铝水滑石的制备及表征

将磁性基质与镍铝类水滑石组装制备磁性镍铝水滑石。研究了磁性基质含量、焙烧温度对水滑石磁学性能及结构的影响。并采用SEM、XRD、FT-IR、DSC-TG及VSM(vibrating sample magnetometer)等测试技术对制备的水滑石的结构和磁学性能进行了表征。结果表明,磁性基质的引入赋予镍铝类水滑石以超顺磁性,磁性基质含量对样品的磁性能起决定性作用,磁性镍铝水滑石的比饱和磁化强度随磁性基质含量的增加而增加;XRD分析结果表明,磁性基质的引入没有改变水滑石的典型层状结构且随着磁性基质含量的增多,磁性镍铝水滑石的特征衍射峰的衍射强度有所降低,n(Ni2 )/n(Fe2 )达到20时,XRD谱图中开始出现Fe3O4晶相的衍射峰;前驱体经1073K焙烧后出现尖晶石晶相;DSC-TG分析结果表明,磁性基质的引入没有改变水滑石2个阶段吸热的特征,这与XRD的检测结果一致。