Chemiluminescence flow system for the determination of Fe(II) and Fe(III) in water

A novel chemiluminescence (CL) flow system has been developed for the sequential determination of Fe(II) and Fe(III) in water. Fe(II) was detected by its catalytic effect on the CL reaction between luminol immobilized on an anion exchange resin column and dissolved oxygen; Fe(III) was determined by difference measurement after on-line conversion to Fe(II) in a reducing mini-column packed with Cu plated Zn granules. For both ions, the calibration graph was linear in the range 1 × 10^–9 to 1 × 10^–6 g/mL, and the detection limit was 4 × 10^–10 g/mL. A complete analysis could be performed in 1.5 min with a relative standard deviation of less than 5%. The system could be reused for over 200 times and has been applied successfully to the determination of Fe(II) and Fe(III) in natural water samples.     

Chemiluminescence flow system for the determination of Fe(II) and Fe(III) in water

A novel chemiluminescence (CL) flow system has been developed for the sequential determination of Fe(II) and Fe(III) in water. Fe(II) was detected by its catalytic effect on the CL reaction between luminol immobilized on an anion exchange resin column and dissolved oxygen; Fe(III) was determined by difference measurement after on-line conversion to Fe(II) in a reducing mini-column packed with Cu plated Zn granules. For both ions, the calibration graph was linear in the range 1 × 10^–9 to 1 × 10^–6 g/mL, and the detection limit was 4 × 10^–10 g/mL. A complete analysis could be performed in 1.5 min with a relative standard deviation of less than 5%. The system could be reused for over 200 times and has been applied successfully to the determination of Fe(II) and Fe(III) in natural water samples. Received: 13 March 1997 / Revised: 3 June 1997 / Accepted: 6 June 1997     

邻菲啰啉计算光度法同时测定生物浸出样品中Fe（Ⅱ）和Fe（Ⅲ）

邻菲哕啉光度法常用于Fe（Ⅱ）测定,但受到试样中Fe（Ⅲ）对测定的影响,因此不能直接用于生物浸出样品中Fe（Ⅱ）和Fe（Ⅲ）的同时测定．为此,基于Fe（Ⅱ）邻菲哕啉特征吸收曲线以及混合铁中Fe（Ⅲ）对Fe（Ⅱ）测定的线性影响关系,建立了基于Fe（Ⅱ）和全铁同时测定Fe（Ⅱ）和Fe（Ⅲ）的计算光度法,并研究了生物浸出样品中典型金属离子（Cu^2＋、Ni^2＋、Cd^2＋、Co^2＋）以及试样溶解与储放对测定的影响．方法可准确地测定含铁次生矿物和生物浸出液中铁价态组成,应用于生物浸出矿渣、细胞表面中常量或微量的Fe（Ⅱ）和Fe（Ⅲ）组成分析,具有简便快速的特点．     

Fe(III)Fe(III) and Fe(II)Fe(III) Complexes as Synthetic Analogues for the Oxidized and Reduced Forms of Purple Acid Phosphatases

Novel Fe(III)Fe(III) and Fe(II)Fe(III) complexes [Fe(2)(BBPMP)(&mgr;-OAc)(&mgr;-X)](n)() (1, X = OAc(-), n = 1+; 2, X = OH(-), n = 1+; 3, X = OAc(-), n = 0; 4, X = OH(-), n = 0), where BBPMP(3)(-) is the anion of 2,6-bis[(2-hydroxybenzyl)(2-pyridylmethyl)aminomethyl]-4-methylphenol, and OAc(-) is acetate, were prepared in order to provide models for the active site of purple acid phosphatases (PAPs). Complex 1 was obtained by the reaction of H(3)BBPMP with Fe(ClO(4))(2).6H(2)O in methanol and sodium acetate trihydrate under ambient conditions, while complex 3 was synthesized as described for 1, under an argon atmosphere with low levels of dioxygen. 2 was isolated from 1in acetonitrile by a substitution of the bridging acetate group by hydroxide, while 4 was generated in solution during a spectropotentiostatic experiment on 2, under argon. Complex 1, [Fe(III)(2)(BBPMP)(&mgr;-OAc)(2)]ClO(4).H(2)O, has been characterized by X-ray crystallography. Crystal data: monoclinic, space group P2(1)/n, a = 14.863(5) ?, b = 12.315(3) ?, c = 20.872(8) ?, beta = 90.83(3) degrees, Z = 4. IR, M?ssbauer, magnetic, electronic absorption, and electrochemical properties of 1-3 have been investigated, and some of these properties represent a contribution to the understanding of the dinuclear iron center of PAPs. Complexes 2, [Fe(III)(2)(BBPMP)(&mgr;-OAc)(&mgr;-OH)]ClO(4) (lambda(max) = 568 nm/epsilon = 4760 M(-)(1) cm(-)(1)), and 4 [Fe(II)Fe(III)(BBPMP)(&mgr;-OAc)(&mgr;-OH)] (lambda(max) = 516 nm/epsilon = 4560 M(-)(1) cm(-)(1)), constitute good synthetic analogues for the chromophoric site for the oxidized and reduced forms, respectively, of the enzyme.     

Preparation of57Fe enriched K4[Fe(CN)6] and K3[Fe(CN)6]

A simple method to prepare⁵⁷Fe enriched K₄[Fe(CN)₆] and K₃[Fe(CN)₆] is described. The yields of the products are much better than those reported in the literature so far. The enrichment is essential for⁵⁷Fe Mössbauer investigation in a variety of Prussiate type complexes and other inorganic compounds which are conveniently prepared from K₄[Fe(CN)₆] and K₃[Fe(CN)₆]. K₄[Fe(CN)₆] was obtained by reacting freshly prepared Fe(OH)₃ with glacial acetic acid and treating with iron acetate in boiling aqueous solution of KCN. The novel feature of the procedure to obtain K₃[Fe(CN)₆] is that the oxidation of K₄[Fe(CN)₆] has been carried out in the solid state by passing chlorine gas over the powdered specimen. K₃[Fe(CN)₆] was crystallised from alkaline solution of this oxidised powder. The compounds were characterised by Mössbauer spectroscopy.     

Theoretical study of NH3 adsorption on Fe(110) and Fe(111) surfaces

With the aim of understanding the nature of the interactions between organic molecules and metal surfaces, the adsorption of NH3 onto model Fe(110) and Fe(111) surfaces has been studied with use of the molecular orbital and density functional theories. B3LYP calculations have revealed that the on-top site is most suitable for adsorption of NH3 both on Fe(110) and on Fe(111). Mulliken population analysis in terms of the MO's of the two fragment systems suggested that electron delocalization from NH3 to the Fe surface should play a key role in the adsorption. Then, our transformation scheme of fragment orbitals has demonstrated that the electron delocalization is represented well only by a pair of interaction orbitals. The NH3 molecule provides the occupied interaction orbital bearing a close resemblance to the highest occupied (HO) MO, whereas the Fe surface prepares the paired unoccupied orbital that is localized at the adsorption site and overlaps in-phase with the orbital of NH3. Not only the lowest unoccupied (LU) MO but also other unoccupied MO's have been shown to participate significantly in the interaction. The reason the on-top site is the most preferable position for NH3 attack has been elucidated by investigating the interaction orbitals.     

Fe(AsO4): a new iron(III) arsenate synthesized from thermal treatment of (NH4)[Fe(AsO4)F

The new orthorhombic Fe(AsO4) phase has been synthesized by thermal treatment at 525 degrees C of a new (NH4)[Fe(AsO4)F] compound, with a [Fe(AsO4)F]- skeleton showing channels where the ammonium cations are located. The crystal structure of Fe(AsO4) has been solved from single-crystal data. The structure is formed by layers of edge-sharing dimeric octahedra, and interconnected by chains of alternating FeO6 octahedra and AsO4 tetrahedra.     

Recent advances in synthesis and analysis of Fe(VI) cathodes: solution phase and solid-state Fe(VI) syntheses,reversible thin-film Fe(VI) synthesis,coating-stabilized Fe(VI) synthesis,and Fe(VI) analytical methodologies

Fe(VI) batteries based on unusual ferrate cathodic charge storage have been studied for quite a few years. So far, a class of Fe(VI) compounds have been successfully synthesized and studied as the cathodic materials in both alkaline and nonaqueous battery systems. This paper provides a summary of the syntheses of a range of Fe(VI) cathodes including the alkali Fe(VI) salts Li₂FeO₄, K _x Na_(2?x)FeO₄, K₂FeO₄, Rb₂FeO₄, Cs₂FeO₄, as well as alkali earth Fe(VI) salts CaFeO₄, SrFeO₄, BaFeO₄, and a transition metal Fe(VI) salt Ag₂FeO₄. Two synthesis routes summarized in this paper are the solution phase synthesis and the solid-state synthesis. Preparation of coating-stabilized (coated with KMnO₄, SiO₂, TiO₂, or ZrO₂) Fe(VI) cathodes and preparation of thin-film reversible Fe(VI/III) cathodes are also presented. Fe(VI) analytical methodologies summarized in this paper include Fourier transform infrared spectrometry, titrimetric (chromite), ultraviolet-visible spectroscopy, X-ray diffraction, inductively coupled plasma spectroscopy, Mössbauer spectrometry, potentiometric, galvanostatic, and cyclic voltammetry. Cathodic charge transfer of Fe(VI) is also briefly presented.     

Fe(III)与2,3-二羟基苯磺酸钠配位反应的动力学研究

[H⁺]在0.01～0.70 mol•L^－1范围内, 离子强度为1.00 mol•L^－1, [Fe(III)]>>[配体]、[H⁺]>>[配体]的条件下, 研究了Fe(III)与2,3-二羟基苯磺酸钠(Tiron)的配位反应. 发现当[H⁺]≤3.00×10^－2 mol•L^－1时, [Fe(III)]²对反应速率有明显的贡献. 求得了相关反应的动力学参数, 从而揭示了FeOH²⁺和与Tiron配位的解离反应途径及的缔合反应机制, 并提出了该配位反应的可能机理.     

Reversed-phase liquid chromatographic separation of Fe(II) and Fe(III) as their respective 1,10-phenanthroline and 5-sulphosalicylate complexes

A method has been developed for the separation of Fe(II)-1,10-phenanthroline and Fe(III)-5-sulphosalicylate complexes on a reversed-phase C₁₈ column in the presence of an ion-pairing reagent. Samples were injected on the column in the pre-complexed form and separated using a mobile phase consisting of acetonitrile [0.1% (w/v) in 5-sulphosalicylic acid] ?0.02 M sodium acetate buffer (pH 6.9) [0.1% (w/v) in tetramethylammonium chloride] (1 + 1). Spectrophotometric detection of the complexes was carried out at 515 nm. Linear calibration graphs were obtained for 1–12 μg mol^?1 Fe(II) and Fe(III).     

Kristall- und molekülstruktur von nonacarbonyl-bis(μ3-phenylarsiniden)trieisen(2FeFe)

Nonacarbonylbis(μ₃-phenylarsinidene)triiron(2FeFe) has been prepared by reaction of Na₂[Fe(CO)₄] with C₆H₅AsCl₂. Its X-ray structural study reveals an Fe₃As₂ cluster. Three Fe(CO)₃ groups occupy the equatorial positions of a distorted trigonal bipyramid with two μ₃-bridging AsC₆H₅ groups at the axial sites. The Fe₃ triangle contains only two FeFe bonds as reflected by different atomic distances.Crystal data: space group P2₁/c, a = 11.427(9), b = 15.43(1), c = 14.60(1) Å, β = 107.32(3)°, Z = 4. With 3786 reflections, for which F_o > 3(F_o), the structure has been refined anisotropically (hydrogen atoms isotropically) to R = 0.048.     

Potentiometric estimation of sulfide ion using the Fe(III)-EDTA complex

The Fe(III)-EDTA complex reacts with sulfide ion in a fast electron transfer reaction, oxidising the latter to elemental sulfur and getting itself reduced to Fe(II). The reaction has been developed for the quantitative estimation of sulfide ion by titration against the Fe(III)-EDTA complex, measuring the redox potential of the system. Repeated use of a given quantity of the complex solution by the process of regeneration has been demonstrated. The possibility of its practical application in liquid phase oxidation processes of recovering sulfur from H₂S is emphasized.     

Fe(II) hydrolysis in aqueous solution: A DFT study

Species arising from Fe(II) hydrolysis in aqueous solution have been investigated using density-functional methods (DFT). The different tautomers and multiplicities of each species have been calculated. The solvation energy has been estimated using the UAHF–PCM method. The hydrolysis free energies have been estimated and compared with the available experimental data. The different hydrolysis species have distinct geometries and electronic structures. The estimated ionization potential of the hydrolyzed species is linearly dependent to the number of hydroxyls present in the complex. The estimated Fe(II)/Fe(III) oxidation potential is in good agreement with previously published results about 0.29 V larger than the experimental value. The results highlight the importance of the chemical speciation in describing electron transfer processes at a molecular level. The PBE/TZVP/UAHF–PCM method has been found to describe correctly the hydrolysis free energies of Fe(II) with an average error about 5 kcal mol⁻¹ from the experimental values.     

μ-Azido- and μ-Oxo-Complexes of Fe(III) with Schiff Bases

Two new azido-bridged Fe(III) Schiff base complexes, [Fe(salen)N 3 ] and [Fe(MeO-salen)N 3 ]·2H 2 O, [salen = N , N '-bis-salicylaldehyde(ethylenediimine) and MeO-salen = N , N' -bis-3-methoxysalicylaldehyde(ethylenediimine)] have been synthesized, characterized and studied cryo-magnetically. A new isomeric form of the complex [{Fe(salen) 2 O}] was obtained when attempts were made to grow single crystal of [Fe(salen)N 3 ] from different solvents. The structure of [Fe(salen)] 2 O has been determined by single crystal X-ray analysis. Magnetic susceptibility measurements show the presence of antiferromagnetic interactions in [Fe(salen)N 3 ] and [Fe(MeO-salen)N 3 ]·2H 2 O. The theoretical fit of the susceptibility data yielded values for the spin exchange parameters J = m 10 ( - 0.2) and m 13 ( - 0.3) cm m 1 , for [Fe(salen)N 3 ] and [Fe(MeO-salen)N 3 ]·2H 2 O, respectively.     

Determination of Fe(II)-Fe(III) and Fe(III)-Ni(II) by the two-component potentiometric complexometric titration

Summary The two-component complexometric potentiometric titration has been applied to the simultaneous determination of Fe(III) and Fe(II), and of Fe(III) and Ni(II) in solution. In each case the two analytes were determined by reading the end-points directly from the titration curve. The end-points are determined in a sense arbitrarily, but they are repeatable and easy to be detected precisely. However, the apparent (found) analytical results are biased. They are effectively corrected with the use of a set of two calibration equations (uncomplete second degree polynomials), which approximate the relationship between found endpoints and true concentrations of analytes in solution. The regression coefficients in the equations are determined on the basis of titration data obtained for standard solutions whose compositions correspond to a 2² factorial. Permanent address: Department of Analytical Chemistry, Jagiellonian University, Krakow     

Single-molecule-magnet behavior in a Fe(12)Sm(4) cluster

Through the combination of Sm(III) spin carriers with a Fe(III) system, the largest Fe-Ln cluster so far has been synthesized. To our knowledge, the new complex, Fe(12)Sm(4), is the first Sm(III) single-molecule magnet. Furthermore, Fe(12)La(4) and Fe(12)Gd(4) have also been synthesized to help understand the magnetic exchange interactions and origin of magnetic anisotropy in Fe(12)Sm(4).     

Iron Forms Fe(II) and Fe(III) Determination in Pre-Roman Iron Age Archaeological Pottery as a New Tool in Archaeometry

This article presents studies on iron speciation in the pottery obtained from archaeological sites. The determination of iron forms Fe(II) and Fe(III) has been provided by a very simple test that is available for routine analysis involving the technique of molecular absorption spectrophotometry (UV–Vis) in the acid leachable fraction of pottery. The elemental composition of the acid leachable fraction has been determined by inductively coupled plasma optical emission spectrometry (ICP-OES). Additionally, the total concentration of the selected elements has been determined by X-ray fluorescence spectrometry with energy dispersion (EDXRF). The results of the iron forms’ determinations in archaeological pottery samples have been applied in the archaeometric studies on the potential recognition of the pottery production technology, definitely going beyond the traditional analysis of the pottery colour.     

Validation of interstitial iron and consequences of nonstoichiometry in mackinawite (Fe(1+x)S)

A theoretical investigation of the relationship between chemical composition and electronic structure was performed on the nonstoichiometric iron sulfide, mackinawite (Fe(1+x)S), which is isostructural and isoelectronic with the superconducting Fe(1+x)Se and Fe(1+x)(Te(1-y)Se(y)) phases. Even though Fe(1+x)S has not been measured for superconductivity, the effects of stoichiometry on transport properties and electronic structure in all of these iron-excess chalcogenide compounds has been largely overlooked. In mackinawite, the amount of Fe that has been reported ranges from a large excess, Fe(1.15)S, to nearly stoichiometric, Fe(1.00(7))S. Here, we analyze, for the first time, the electronic structure of Fe(1+x)S to justify these nonstoichiometric phases. First principles electronic structure calculations using supercells of Fe(1+x)S yield a wide range of energetically favorable compositions (0 < x < 0.30). The incorporation of interstitial Fe atoms originates from a delicate balance between the Madelung energy and the occupation of Fe-S and Fe-Fe antibonding orbitals. A theoretical assessment of various magnetic structures for "FeS" and Fe(1.06)S indicate that striped magnetic ordering along [110] is the lowest energy structure and the interstitial Fe affects the values of moments in the square planes as a function of distance. Moreover, the formation of the magnetic moment is dependent on the unit cell volume, thus relating it to composition. Finally, changes in the composition cause a modification of the Fermi surface and ultimately the loss of a nested vector.     

Unraveling the photochemistry of Fe(CO)5 in solution: observation of Fe(CO)3 and the conversion between 3Fe(CO)4 and 1Fe(CO)4(Solvent)

The photochemistry of Fe(CO)5 (5) has been studied in heptane, supercritical (sc) Ar, scXe, and scCH4 using time-resolved infrared spectroscopy (TRIR). 3Fe(CO)4 ((3)4) and Fe(CO)3(solvent) (3) are formed as primary photoproducts within the first few picoseconds. Complex 3 is formed via a single-photon process. In heptane, scCH4, and scXe, (3)4 decays to form (1)4 x L (L = heptane, CH4, or Xe) as well as reacting with 5 to form Fe2(CO)9. In heptane, 3 reacts with CO to form (1)4 x L. The conversion of (3)4 to (1)4 x L has been monitored directly for the first time (L = heptane, kobs = 7.8(+/- 0.3) x 10(7) s(-1); scCH4, 5(+/- 1) x 10(6) s(-1); scXe, 2.1(+/- 0.1) x 10(7) s(-1)). In scAr, (3)4 and 3 react with CO to form 5 and (3)4, respectively. We have determined the rate constant (kCO = 1.2 x 10(7) dm3 mol(-1) s(-1)) for the reaction of (3)4 with CO in scAr, and this is very similar to the value obtained previously in the gas phase. Doping the scAr with either Xe or CH4 resulted in (3)4 reacting with Xe or CH4 to form (1)4 x Xe or (1)4 x CH4. The relative yield, [(3)4]:[3] decreases in the order heptane > scXe > scCH4 > scAr, and pressure-dependent measurements in scAr and scCH4 indicate an influence of the solvent density on this ratio.     

Synthesis of ordered mesoporous Fe3O4 and gamma-Fe2O3 with crystalline walls using post-template reduction/oxidation

Ordered mesoporous Fe(3)O(4) with crystalline walls (inverse spinel structure) has been synthesized for the first time, representing to the best of our knowledge, the first synthesis of a reduced mesoporous iron oxide. Synthesis was achieved by reducing ordered mesoporous alpha-Fe(2)O(3) (corundum structure) to Fe(3)O(4) spinel then to gamma-Fe(2)O(3) by oxidation, while preserving the ordered mesostructure and crystalline walls throughout. Such solid/solid transformations demonstrate the stability of the mesostructure to structural phase transitions from the hexagonal close packed oxide subarray of alpha-Fe(2)O(3) (corundum structure) to the cubic close packed subarray of Fe(3)O(4) spinel and gamma-Fe(2)O(3). Preliminary magnetic measurements reveal that the spins in both Fe(3)O(4) and gamma-Fe(2)O(3) are frozen at 295 K, despite the wall thickness (7 nm) being less than the lower limit for such freezing in corresponding nanoparticles (>8 nm).