Development of a novel ionic support and its application in the ionic liquid phase assisted synthesis of a potent antithrombotic

The synthesis of ionic support 1 and its application in the preparation of a set of amides and sulfonamides is described. The potential of 1 is further exemplified by its use in a one-pot multistep ionic liquid phase assisted synthesis of tirofiban analogue 2.     

Femtosecond solvation dynamics in a neat ionic liquid and ionic liquid microemulsion: excitation wavelength dependence

Solvation dynamics in a neat ionic liquid, 1-pentyl-3-methyl-imidazolium tetra-flouroborate ([pmim][BF4]) and its microemulsion in Triton X-100 (TX-100)/benzene is studied using femtosecond up-conversion. In both the neat ionic liquid and the microemulsion, the solvation dynamics is found to depend on excitation wavelength (lambda(ex)). The lambda(ex) dependence is attributed to structural heterogeneity in neat ionic liquid (IL) and in IL microemulsion. In neat IL, the heterogeneity arises from clustering of the pentyl groups which are surrounded by a network of cation and anions. Such a nanostructural organization is predicted in many recent simulations and observed recently in an X-ray diffraction study. In an IL microemulsion, the surfactant (TX-100) molecules aggregate in form of a nonpolar peripheral shell around the polar pool of IL. The micro-environment in such an assembly varies drastically over a short distance. The dynamic solvent shift (and average solvation time) in neat IL as well as in IL microemulsions decreases markedly as lambda(ex) increases from 375 to 435 nm. In a [pmim][BF4]/water/TX-100/benzene quaternary microemulsion, the solvation dynamics is slower than that in a microemulsion without water. This is ascribed to the smaller size of the water containing microemulsion. The anisotropy decay in an IL microemulsion is found to be faster than that in neat IL.     

Solubility of small molecule in ionic liquids: a model study on the ionic size effect

Recently, the solvent power of ionic liquid (IL) has been described based on Flory-Huggins (FH) theory assuming that the volumes of the components are the same (J. Phys. Chem. B, 2006, 110, 16205). Here, we extended the FH theory to derive the solvent power in the case of different sizes (molar volumes) of the IL's components based on "polymer-like" model. Applying this model, the effect of ionic size on the solvent power of ionic liquids has been investigated. It was found that the effect of size can be characterized by introducing the effective volume (V+ and V-) of each site of the ion, and for the equivalent ionic liquid, the larger effective volume of the ionic liquid has the larger solvent power. Our results are in excellent agreement with the experimental solubility data in various ionic liquids.     

Modeling of ionic relaxation around a biomembrane disk

A simplified Brownian dynamics model and the corresponding software implementation have been developed for the simulation of electrolyte dynamics on the mesoscopic scale. In addition to direct control simulations, the model system has been verified by a quantitative comparison with the Debye-Hückel theory. As a first application, the model was used to simulate ionic relaxation processes following abrupt intramembrane charge rearrangements in the case of a disk shaped membrane. In addition to its general implications, the obtained properties of the relaxation kinetics confirm the assumptions of the theory of the so-called suspension method, a technique capable of tracing molecular charge motions of membrane proteins in three dimensions.     

Surface-functionalized ionic liquid crystal-supported ionic liquid phase materials: ionic liquid crystals in mesopores

The influence of confinement on the ionic liquid crystal (ILC) [C(18)C(1)Im][OTf] is studied using differential scanning calorimetry (DSC), polarized optical microscopy (POM), and diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS). The ILC studied is supported on Si-based powders and glasses with pore sizes ranging from 11 to 50 nm. The temperature of the solid-to-liquid-crystalline phase transition seems mostly unaffected by the confinement, whereas the temperature of the liquid-crystalline-to-liquid phase transition is depressed for smaller pore sizes. A contact layer with a thickness in the order of 2 nm is identified. The contact layer exhibits a phase transition at a temperature 30 K lower than the solid-to-liquid-crystalline phase transition observed for the neat ILC. For applications within the "supported ionic liquid phase (SILP)" concept, the experiments show that in pores of diameter 50 nm a pore filling of α>0.4 is sufficient to reproduce the phase transitions of the neat ILC.     

Pentazole-based energetic ionic liquids: a computational study

The structures of protonated pentazole cations (RN5H+), oxygen-containing anions such as N(NO2)2-, NO3-, and ClO4- and the corresponding ion pairs are investigated by ab initio quantum chemistry calculations. The stability of the pentazole cation is explored by examining the decomposition pathways of several monosubstituted cations (RN5H+) to yield N2 and the corresponding azidinium cation. The heats of formation of these cations, which are based on isodesmic (bond-type conserving) reactions, are calculated. The proton-transfer reaction from the cation to the anion is investigated.     

Metal chelate formation using a task-specific ionic liquid

An imidazolium-based task-specific ionic liquid containing an ethylaminediacetic acid moiety readily results in the formation of 2:1 octahedral chelate complexes with aqueous Co2+, Ni2+, and Cu2+.     

Room-temperature ionic liquids: a novel versatile lubricant

Alkylimidazolium tetrafluoroborates are promising versatile lubricants for the contact of steel/steel, steel/aluminium, steel/copper, steel/SiO2, Si3N4/SiO2, steel/Si(100), steel/sialon ceramics and Si3N4/sialon ceramics; they show excellent friction reduction, antiwear performance and high load-carrying capacity.     

Nonasymptotic critical behavior of a ternary ionic system

Refractive indices n and salt concentrations ms of coexisting phases of the ternary system 1,4-dioxane + water + potassium chloride were measured along the liquid-liquid-solid coexistence curve near the liquid-liquid critical end point. Refractive index measurements were carried out in the range 0.689 x 10-3 < t = (T - Tc)/Tc < 0.118 while salt concentrations were determined for the temperature range 1.84 x 10-3 < t < 8.07 x 10-2. From these experimental results, compositions fD (mass fraction of dioxane on a salt-free basis) and densities rho of coexisting phases were obtained. The shape of the coexistence curve was analyzed using alternatively n, ms, fD, and rho as order parameters. In all cases, the obtained coexistence curve displays, asymptotically, Ising behavior. Outside the asymptotic critical domain, n, ms, and rho show significant deviations of the effective critical exponent from its Ising value, while the concentration variable fD requires no corrections to simple scaling. On the basis of the present results, we conclude that this system shows no indication of multicritical behavior.     

Recognition of ionic guests by ionic beta-cyclodextrin derivatives

Inclusion compounds of cationic, anionic, and neutral p-substituted derivatives of tert-butylbenzene complexed in beta-cyclodextrin and its ionic 6-mono and 6-hepta derivatives were systematically investigated by isothermal titration calorimetry (ITC). All inclusion compounds showed 1:1 stoichiometry with binding constants ranging from 10 to 3 x 10(6) M(-1). The binding free energies could be subdivided into apolar and electrostatic contributions. The electrostatic interactions could be quantitatively described by Coulomb's law by taking into account the degree of protonation of hosts and guests, the orientations of the guests within the hosts, and ion shielding as described by the Debye-Hückel-Onsager theory. The orientations of the guests within the cyclodextrin cavities were determined by ROESY NMR spectroscopy.     

Synthesis and ionic conductivity of polymer ionic liquids

Four vinyl monomers containing a covalently bonded cation ethylimidazolium and various anions—Br^?, (CF₃SO₂)₂N^?, (CN)₂N^?, and CF₃SO ₃ ^? —have been synthesized. High-molecular-mass polymers (M _w up to 1.84 × 10⁶) having the structure of ionic liquids have been prepared via the free-radical polymerization of 1-vinyl-3-ethylimidazolium in bulk and molecular and ionic solvents. The thermal stability and heat resistance of the resulting polymer salts have been estimated. It has been demonstrated that the thermal characteristics of these salts significantly depend on the nature of anions. The glass-transition temperatures of the polymers range from 19 to 235°C. The ionic conductivity of the polymer salts and their compositions with individual ionic liquids has been studied in the frequency range 50–10⁶ Hz. The highest conductivity (1.5 × 10^?5 S/cm) is exhibited by the polymer containing the (CN)₂N^? anion.     

Bacterial attachment over a wide range of ionic strengths

The number of bacterial cells adhered on a glass surface was counted over a wide range of ionic strengths. The counted number increased linearly with the square root of time. The rate of attachment increased with the increase in ionic strength and then plateaued. The rate of attachment was analyzed on the basis of the potential barrier between the surface of the bacterial cell and that of the substratum. An equation for formulating the dependence of the attachment rate on the ionic strength was proposed, which seems to be useful for the systematic understanding of bacterial attachment in various environments, from terrestrial to marine.     

Cationic polymerization of styrene in a neutral ionic liquid

The cationic polymerization of styrene in a neutral ionic liquid, 1‐butyl‐3‐methylimidazolium hexafluorophosphate, with a 1‐phenetyl chloride/TiCl₄ initiating system is reported. The polymerization proceeds to a high conversion, but an analysis of the matrix‐assisted laser desorption/ionization time‐of‐flight spectra of the polymers indicates that chain transfer is significant, leading to a lack of control over the molecular weight and molecular weight distribution. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 3230–3235, 2004     

Charged polypeptide diffusion at a very high ionic strength

Two charged polypeptides of opposite charge, poly(glutamic acid) (negative charge) and polylysine (positive charge), were end-labeled with Alexa fluorescent dyes, and their translational diffusion coefficient (D) values in dilute solutions (∼10⁻⁴ mg mL⁻¹) were studied at the biological pH with fluorescence correlation spectroscopy as a function of the ionic strength (C_s) mediated by the addition of NaCl. At a moderate ionic strength, D increased consistently with expected chain contraction because of electrostatic screening. At a very high ionic strength, D of poly(glutamic acid) increased more rapidly, following the empirical power law R_H ∼ C_s^−1/2 over a limited range of C_s, where the changes in D were interpreted as changes in the hydrodynamic radius, R_H. However, D of polylysine at first decreased but eventually passed through a maximum followed by a decrease. These large increases implied that R_H decreased considerably, in turn implying a strong contraction of the chain conformations even though the polymer remained soluble and showed no evidence of aggregation. For polylysine, the unexpected minimum R_H value may be related to the salting-in phenomenon. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 3497–3502, 2005     

Palladium nanoparticles stabilized by an ionic polymer and ionic liquid: a versatile system for C-C cross-coupling reactions

Highly stable palladium nanoparticles (Pd NPs), protected by an imidazolium-based ionic polymer (IP) in a functionalized ionic liquid (IL), have been prepared and characterized by transmission electron microscopy (TEM). These Pd NPs are excellent precatalysts for Suzuki, Heck, and Stille coupling reactions and can be stored without undergoing degradation for at least 2 years. The NP-IP-IL system may therefore be considered as an alternative to the traditional palladium on carbon (Pd/C) precatalyst employed in many C-C coupling reactions, also allowing reactions to be conducted under "solvent-free" conditions.     

Surface tension of ionic liquids and ionic liquid solutions

Some of the most active scientific research fronts of the past decade are centered on ionic liquids. These fluids present characteristic surface behavior and distinctive trends of their surface tension versus temperature. One way to explore and understand their unique nature is to study their surface properties. This critical review analyses most of the surface tension data reported between 2001 and 2010 (187 references).     

Electrodeposition of nanocrystalline aluminium from a chloroaluminate ionic liquid

In this letter we show that nanocrystalline aluminium can be electrodeposited in the Lewis acidic ionic liquid based on AlCl₃ (60 mol%) and 1-(2-methoxyethyl)-3-methylimidazolium chloride ([MoeMIm]Cl) (40 mol%). The study comprised cyclic voltammetry, potentiostatic polarization, and SEM and XRD measurements. The methoxy group in the side chain of the imidazolium cation significantly influences the electrodeposition pathway of Al in comparison to [EMIm]Cl/AlCl₃. Cyclic voltammetry shows a significant current loop attributed to nucleation. Shiny Al layers are obtained with an average crystallite size of about 40 nm.