基于光场重构的空间三维显示技术

真实空间三维显示可以通过精确再现三维物体的空间光场分布来实现.依据三维景物空间光场分布特性,提出并介绍基于光场重构的真实空间三维场景显示的基本原理与方法.实验表明,利用光场重构原理,可以运用现有的光学空间光调制器构造出比全息再现更为优越的真实三维显示.     

Three-dimensional optical Fourier transform and correlation

Optical implementation of a three-dimensional (3-D) Fourier transform is proposed and demonstrated. A spatial 3-D object, as seen from the paraxial zone, is transformed to the 3-D spatial frequency space. Based on the new procedure, a 3-D joint transform correlator is described that is capable of recognizing targets in the 3-D space.     

All optical phase-only filtering correlation with binarized inputs by a ferroelectric liquid-crystal spatial light modulator

All optical phase-only filtering correlator is constructed with an optically addressed ferroelectric liquid-crystal spatial light modulator (FSLM) for a binarized input object and a twisted-nematic liquid-crystal spatial-light modulator for a computer-generated phase-only filter. In order to improve the discrimination capability of a phase-only filtering correlator, a binarized amplitude with maximum contrast in a FSLM is used for an object input. The contrast of binarized intensities can be maximized by adjusting the rotation angles of a FSLM and polarizers. The threshold level of binarized input objects can be controlled by changing the power of a laser incident on a FLSM. Experimental results with a high discrimination capability are presented to support the numerical correlation performance.     

漫反射物的实时互相关运算

发展一种价格便宜、体积小、操作方便的空间光调制器——液晶电视,完成非相干-相干转换.由BSO晶体构成的实时光学相关器完成漫反射物的实时互相关运算.     

嵌入式三维数字成像系统

提出一种基于数字信号处理器(DSP)的嵌入式三维数字成像系统设计方案。该方案的硬件平台由条纹投影模块、数据采集模块、条纹自动分析模块及储存器等其他辅助电路组成。条纹投影模块将DSP输出的正弦光栅条纹, 经视频编码后用DLP投射到物体表面; 数据采集模块通过CCD相机采集被物体表面三维信息调制后的变形条纹图, 并进行视频解码; 条纹自动分析模块中利用相移算法计算折叠相位, 再结合相位展开算法求绝对相位分布。系统软件采用多线程技术并行控制三个模块。在相位解调过程中以软件流水线为主综合运用了循环展开、数据预取和内联函数等多种方法优化解调程序。实验结果表明, 该系统可以高速、准确地实现三维轮廓测量,优化后相位展开程序速度是优化前的7倍。     

灰值数学形态学的二值算法及其光学实现

在灰值数学形态学的阴影算法的基础上，提出了采用表面点集代替阴影来代表灰值结构核的改进算法，大大降低了二值邻域互连的数量。光学实现采用一个光学非相干相关器与阈值器件结合的二值数学形态学系统，并设计了一种数字空间编码技术使这二维系统能实现算法要求的有限三维操作。     

三维面形测量数据的计算全息可视化

提出利用计算机制全息进行三维面形测量数据立体重现的技术。首先利用三维面形测量技术同时获取三维物体的强度和距离像；然后根据三维面形测量数据，设计和制作菲涅耳计算全息图；最后将计算全息和光学全息相结合，以菲涅耳计算全息图的光学再现像为对象，记录光学像全息。这样既解决了计算机制全息术中真实三维物体立体信息数据捕捉的问题，又为三维面形检测提供了一个行之有效的立体重构技术。给出了这种方法的原理、计算全息的设计、制作方案和实验验证结果。     

Measurement of spatial object''''s exterior attitude based on linear CCD

It is difficult to realize real-time measurement of exterior attitude by the traditional systems based on the area image sensor which have conflict between speed and accuracy.The subsystem for three-dimensional (3D) coordinate rcconstruction of point target (S3DCRPT) which is composed of three one-dimensional (1D) cameras based on linear charge-coupled device (CCD) can determine the distant light spots' spatial position. The attitude angle of the measured object is determined by the spatial solution while the coordinate reconstruction is separately carried on by the S3DCRPT with some point cooperation targets (PCTs) on the measured object. A new optical system is designed to solve the interference problem with one-to-one relationship between the PCTs and the S3DCRPT optical subsystems,which improves the measurement accuracy and saves space. The mathematical model of the attitude measurement is established,and partial and global calibrations are realized for the multi-camera attitude measurement system.The test results show the feasibility of the exterior attitude measurement based on linear CCD.     

位错点阵投影的三维数字成像

提出一种基于位错点阵投影的三维数字成像方法。该方法以二维点阵结构光顺序照明参考平面和被测物体表面,通过分析分别投影在参考平面和物体上的点阵的成像过程,建立投射在参考平面和被测物体表面上的点阵中同一点在成像面上横向位置错动与被测物体深度之间的数学模型。依据此模型,通过计算相对应点在成像平面上的横向位移。可计算出物体的深度图像。二维点阵可以在垂直于光轴的平面内做横向和纵向的两维移动,以填补由于离散而丢失的其他空间点的深度信息,获得高空间分辨率。实验验证了该方法的可行性,此方法对于拓扑复杂的表面和大梯度表面有较强的适应性。     

Semiderivative real filter for microoptical elements quality control

The article presents a proposal for a new method of automatic quality control of microlenses arrays, which is based on a semiderivative real filter. The use of the semiderivative filter for examining pure-phase objects involves modifying the spatial frequency. The basis of the proposed setup is a 4f correlator setup with coherent light. The phase object examined is placed in the input plane of the correlator. Next, the light passes through a filter located in the frequency plane, which gives an intensity signal. In the output plane a charge-coupled device (CCD) camera registers the light intensity, the range of which informs the shape of the phase object. The proposed method is shift invariant, so it allows for examination of single elements or a set of micro-optical elements simultaneously. Additionally, the same setup allows for measuring the phase of objects whose thickness is either considerably smaller or much bigger than 2π.     

Resolution-enhanced 3D image correlator using computationally reconstructed integral images

In this paper, a novel resolution-enhanced three-dimensional (3D) image correlator using the computationally reconstructed integral images is proposed in order to extract target object’s 3D location data in a scene. Elemental images of the reference and target objects are picked up by lenslet arrays and using these elemental images, reference and target plane images are reconstructed on the output plane by means of a modified computational integral imaging reconstruction technique. Then, through cross-correlations between the reconstructed reference and the target plane images, 3D location data of the target object can be extracted from the correlation outputs. With the purpose of showing the feasibility of the proposed method, some computational and optical experiments on the target objects in space are carried out and the results are presented.     

基于机器视觉的三维灰度重构技术

基于双目立体视觉三维重构原理,采用主动扫描实现特征匹配的三维灰度重构技术,通过特征结构光扫描物体表面,由经过预标定的两套成像传感器拍摄其图像,经过图像处理程序提取出特征点,完成特征匹配,再计算出物体表面三维轮廓,同时将成像传感器中的灰度信息映射到相应的特征点,从而实现特征点的三维信息和颜色信息的重构和匹配。该技术为三维彩色逼真场景的重构奠定了基础。     

光学小波变换在视觉系统的应用研究

为了提高图像信息处理速度,利用光电混合实现的方法,将光学小波变换应用于视觉系统设计.依据4f相关器光学信息处理的原理,在频域内通过计算机编码,在电寻址空间光调制器上,构建不同类型的小波函数滤波器库,对目标的图像特征进行提取与辨识.研究结果表明,基于光学小波变换视觉系统正确可行.在图像特征提取中,以光波传递信息可以提高视觉信息处理的速度.     

Three-dimensional polarimetric integral imaging

A three-dimensional (3D) polarimetric image sensing and display technique based on integral imaging is proposed. Three-dimensional polarization distribution of reflected light from a 3D object can be measured as elemental image arrays by a rotating linear polarizer. After the measurement of the polarization of the 3D object, the 3D polarimetric object can be reconstructed optically by displaying the polarization-selected elemental images in spatial light modulators with two quarter-wave plates. Experimental demonstration of 3D polarimetric imaging of a 3D object attached to two orthogonal linear polarizers is presented. To the best of our knowledge, this is the first report on 3D polarimetric sensing imaging and 3D optical reconstruction by integral imaging.     

Measurement of vibration with Young's fringe modulated speckle patterns in a photorefractive correlator

A technique has been proposed to analyze small in-plane component of vibrations by measuring the fringe shift, and analysing the correlation output of captured vibrating Young's fringes with a photorefractive correlator. Fringes are formed due to interference between the reconstructed speckled beam recorded for stationary object beam, and vibrated speckled beam transmitting through a BaTiO₃ crystal after introducing a small shift in the diffuser position. The correlation peak intensity is affected due to mismatch of vibrations between two piezo-mirrors in the object beam. High correlation output gives an indication of the frequency matching of known reference and unknown vibrations, thus giving information on the frequency of vibration. Vibration amplitudes of the order of a wavelength of light have been measured by counting the number of fringes passing past a line in the observation plane.     

双探头三维表面轮廓测量系统

提出了一种将原子力显微(AFM)探头与位置敏感探测器测距探头相结合的双探头三维表面轮廓测量新方法, 可在获取样品表面轮廓的同时, 测定样品局部形貌。搭建了双探头三维表面轮廓测量系统, 阐述了系统的工作原理, 并对其结构组成包括双探头、步进扫描台和计算机控制平台进行了说明。用2000 line/mm的光栅进行了扫描实验, 对系统的测量范围进行了标定。以外径8 mm、内径4 mm的金属垫圈为样品, 进行了整体三维表面轮廓与局部表面形貌测量实验, 给出了垫圈表面图和局部三维形貌图。结果表明, 该系统能满足不同尺寸和材质的样品的测量要求, 即可实现对样品轮廓的大范围扫描测量, 又可对样品局部进行高精度形貌测量。     

Correlation with spherical wave illumination

In the classical Van der Lugt correlator the plane wave illumination beam has been replaced by a spherical wave to avoid overshining of the undiffracted light in the photographic emulsion when weakly modulated objects have to be correlated. So the object information will be spread over a larger hologram area and an additional spatial frequency filter may be introduced without lengthening the experimental arrangement.     

Three-Dimensional Reconstruction of Icosahedral Virus by Symmetry-Adapted Functions

A three-dimensional （3D） reconstruction of icosahedral virus is carried out by the icosahedral symmetry-adapted function （ISAF） method in spherical coordinates. In order to reduce the influence of noise, it is better to use the basis functions that have identical symmetry with the object reconstructed. It is verified that the ISAF method has stronger ability to reduce the influence of noise to grain the resolution better than that of the conventional method by the simulation of 3D reconstruction.     

应用联合分数傅里叶变换相关器识别多个物体

通过理论分析和计算机仿真研究了联合分数傅里叶变换相关器对多个物体的识别.结果表明联合分数傅里叶变换相关器与基于傅里叶变换的联合变换相关器相比有了较大的改善,提高了目标探测的灵敏性.     

应用神经网络的复杂物体三维测量

将神经网络引入基于结构光投影的复杂物体三维面形测量。在测量过程中,利用神经网络强大的函数逼近能力,得到离散条纹图的连续逼近函数,从中解出物体的相位分布信息,获得物体的三维面形分布。应用神经网络方法,在结构光投影条件下,只需要获取一幅条纹图,便可以完成复杂物体的三维面形测量。该方法相比传统的傅里叶变换轮廓术,不存在滤波操作,不会在测量过程中丢失被测物体的高频分量,具有更高的空间带宽积和灵敏度,能准确测量出复杂物体的细节,更加适用于恢复复杂物体的三维面形。并且该方法在条纹图存在阴影的情况下与傅里叶变换轮廓术相比,能更好地提取出物体的相位信息,恢复物体的三维面形。模拟及实验均验证了该方法的可行性。