Highly luminescent octanuclear Au(I)-Cu(I) clusters adopting two structural motifs: the effect of aliphatic alkynyl ligands

Reactions of the homoleptic (AuC(2)R)(n) precursors with stoichiometric amount of diphosphine ligand PPh(2)C(6)H(4)PPh(2) (P^P) and Cu(+) ions lead to an assembly of a new family of bimetallic clusters [Au(6)Cu(2)(C(2)R)(6)(P^P)(2)](2+) (type I; R=9-fluorenolyl (1), diphenylmethanolyl (2), 2,6-dimethyl-4-heptanolyl (3), 1-cyclohexanolyl (4), Cy (5), tBu (6)). In the case of R=1-cyclohexanolyl, a structurally different complex [Au(6)Cu(2)(C(2)C(6)H(11)O)(6)(P^P)(3)](2+) (7, type II) could be obtained by treatment of 4 with one equivalent of the diphosphine, while for R=isopropanolyl only the latter type of cluster [Au(6)Cu(2)(C(2)C(3)H(7)O)(6)(P^P)(3)](2+) (8) was detected. Steric bulkiness of the alkynyl ligands and O···H-O hydrogen bonding are suggested to play an important role in stabilizing the type I and type II cluster structural motif, respectively. All the complexes exhibit intense photoluminescence in solution with emission parameters that depending on the geometrical arrangement of the octanuclear metal core. The clusters 1-4 and 6 show single emission band in a blue region (469-488 nm) with maximum quantum yield of 94% (4), while structurally different 7 and 8 emit yellow-orange (590 nm) with unity quantum efficiency. The theoretical DFT calculations of the electronic structures have been carried out to demonstrate that the metal-centered triplet emission within the heterometallic core plays a key role for the observed phosphorescence.     

Synthesis and structural analysis of the polymetallated alkali calixarenes [M4(p-tert-butylcalix[4]arene-4H)(thf)x]2.n THF (M=Li,K; n=6 or 1; x=4 or 5) and [Li2(p-tert-butylcalix[4]arene-2H)(H2O)(mu-H2O)(thf)].3 THF

To study the structures and reactivities of alkali metallated intermediates of calix[4]arenes, three compounds were isolated: [Li(4)(p-tert-butylcalix[4]arene-4H)(thf)(4)](2).6 THF (1), [Li(2)(p-tert-butylcalix[4]arene-2H)(H(2)O)(mu-H(2)O)(thf)].3 THF (2), and [K(4)(p-tert-butylcalix[4]arene-4H)(thf)(5)](2).THF (3). The structure of 1 is shown to be dependent on the coordinating solvent. Partial hydrolysis of 1 leads to the formation of 2. The potassium compound 3 features a different structure to that of 1, due to a higher coordination number as well as stronger cation-pi-bonding interactions.     

Structure Determination of Alkynyl‐Protected Gold Nanocluster Au22(tBuC≡C)18 and Its Thermochromic Luminescence

An alkynyl‐protected gold nanocluster, Au₂₂(^tBuC≡C)₁₈ ( 1 ), has been synthesized and its structure has been determined by single‐crystal X‐ray diffraction. The molecular structure consists of a Au₁₃ cuboctahedron kernel and three [Au₃(^tBuC≡C)₄] trimeric staples. The cluster 1 has strong luminescence in the solid state with a 15 % quantum yield, and it displays interesting thermochromic luminescence as revealed by temperature‐dependent emission spectra. The enhanced room‐temperature emission is characterized as thermally activated delayed fluorescence.     

From Cluster to Polymer: Ligand Cone Angle Controlled Syntheses and Structures of Copper(I) Alkynyl Complexes

Copper(I) alkynyl complexes have attracted tremendous attention in structural studies, as luminescent materials, and in catalysis, and homoleptic complexes have been reported to form polymers or large clusters. Herein, six unprecedented structures of Cu^I alkynyl complexes and a procedure to measure the cone angles of alkynyl ligands based on the crystal structures of these complexes are reported. An increase of the alkynyl cone angle in the complexes leads to a modulation of the structures from polymeric [((PhC≡CC≡C)Cu)₂(NH₃)]_∞, to a large cluster [(TripC≡CC≡C)Cu]₂₀(MeCN)₄, to a relatively small cluster [(TripC≡C)Cu]₈ (Trip=2,4,6‐iPr₃‐C₆H₂). The complexes exhibit yellow‐to‐red phosphorescence at ambient temperature in the solid state and the luminescence behavior of the Cu₂₀ cluster is sensitive to acetonitrile.     

Niobium Alcoholate Clusters with an Octahedral Arrangement of Metal Atoms: [K(CH3OH)4]2 [Nb6(OCH3)18] and [Na([18]crown‐6)(C2H5OH)2]2 [Nb6(OC2H5)12(NCS)6]

Complete exchange : [M₆X₁₂] type cluster compounds with an octahedral M₆ metal atom arrangement, which is completely surrounded by alcoholato ligands, were unknown until now. The first representatives are prepared containing a [Nb₆(OR)₁₂]⁴⁺ unit (R=CH₃ or C₂H₅). They are accessible at elevated temperatures from strongly basic alcoholate solutions of [Nb₆Cl₁₂]²⁺‐containing precursors. C gray, H white, K turquoise, Nb blue, O red.

     

[Cu12(NPEt3)8]4+ and [Ag12(NPEt3)8]4+: Cubane Structures

Unusual, highly symmetrical cubes are formed by the dodecameric cationic phosphoraneiminato complexes of copper(I ) and silver(I ) [M₁₂(NPEt₃)₈]⁴⁺, in which the metal atoms occupy the edges and the N atoms of NPEt ³⁻₃ groups the corners of the cube (see figure). The structures can be understood as molecular sections of the Cu₃N structure, which is inverse to the ReO₃‐type structure.     

Reactivity of Liquid Ammonia Solutions of the Zintl Phase K12Sn17 towards Mesitylcopper(I) and Phosphinegold(I) Chloride

To gain more insight into the reactivity of intermetalloid clusters, the reactivity of the Zintl phase K₁₂Sn₁₇, which contains [Sn₄]^4? and [Sn₉]^4? cluster anions, was investigated. The reaction of K₁₂Sn₁₇ with gold(I) phosphine chloride yielded K₇[(η²‐Sn₄)Au(η²‐Sn₄)](NH₃)₁₆ ( 1 ) and K₁₇[(η²‐Sn₄)Au(η²‐Sn₄)]₂(NH₂)₃(NH₃)₅₂ ( 2 ), which both contain the anion [(Sn₄)Au(Sn₄)]^7? ( 1 a ) that consists of two [Sn₄]^4? tetrahedra linked through a central gold atom. Anion 1 a represents the first binary Au?Sn polyanion. From this reaction, the solvate structure [K([2.2.2]crypt)]₃K[Sn₉](NH₃)₁₈ ( 3 ; [2.2.2]crypt=4,7,13,16,21,24‐hexaoxa‐1,10‐diazabicyclo[8.8.8]hexacosane) was also obtained. In the analogous reaction of mesitylcopper with K₁₂Sn₁₇ in the presence of [18]crown‐6 in liquid ammonia, crystals of the composition [K([18]crown‐6)]₂[K([18]crown‐6)(MesH)(NH₃)][Cu@Sn₉](thf) ( 4 ) were isolated ([18]crown‐6=1,4,7,10,13,16‐hexaoxacyclooctadiene, MesH=mesitylene, thf=tetrahydrofuran) and featured a [Cu@Sn₉]^3? cluster. A similar reaction with [2.2.2]crypt as a sequestering agent led to the formation of crystals of [K[2.2.2]crypt][MesCuMes] ( 5 ). The cocrystallization of mesitylene in 4 and the presence of [MesCuMes]^? ( 5 a ) in 5 provides strong evidence that the migration of a bare Cu atom into an Sn₉ anion takes place through the release of a Mes^? anion from mesitylcopper, which either migrates to another mesitylcopper to form 5 a or is subsequently protonated to give MesH.     

Cluster Compounds with Oxidised,Hexanuclear [Nb6Cli 12Ia 6] n− Anions (n=2 or 3)

Four mixed‐halide cluster salts with chloride‐iodide‐supported octahedral Nb₆ metal atoms cores were prepared and investigated. The cluster anions have the formula [Nb₆Clⁱ ₁₂I^a ₆] ⁿ⁻ with Cl occupying the inner ligand sites and I the outer one. They are one‐ or two‐electron‐oxidized (n=2 or 3) with respect to the starting material cluster. (Ph₄P)⁺ and (PPN)⁺ function as counter cations. The X‐ray structures reveal a mixed occupation of the outer sites for only one compound, (PPN)₃[Nb₆Clⁱ ₁₂I^a _5.047(9)Cl^a _0.953]. All four compounds are obtained in high yield. If in the chemical reactions a mixture of acetic anhydride, CH₂Cl₂, and trimethylsilyl iodide is used, the resulting acidic conditions lead to form the two‐electron‐oxidised species (n=2) with 14 cluster‐based electrons (CBEs). If only acetic anhydride is used, the 15 CBE species (n=3) is obtained in high yield. Interesting intermolecular bonding is found in (Ph₄P)₂[Nb₆Clⁱ ₁₂I^a ₆] ⋅ 4CH₂Cl₂ with I⋅⋅⋅I halogen bonding and π‐π bonding interactions between the phenyl rings of the cations in (PPN)₃[Nb₆Clⁱ ₁₂I^a _5.047(9)Cl^a _0.953]. The solubility of (Ph₄P)₂[Nb₆Clⁱ ₁₂I^a ₆] ⋅ 4CH₂Cl₂ has been determined qualitatively in a variety of solvents, and good solubility in the aprotic solvents CH₃CN, THF and CH₂Cl₂ has been found.     

Synthesis and characterisation of nu3-octahedral [Ni36Pd8(CO)48]6- and [Ni35Pt9(CO)48]6- clusters displaying unexpected surface segregation of Pt atoms and molecular and/or crystal substitutional Ni/Pd and Ni/Pt disorder

The synthesis and structure, as well as the chemical and electrochemical characterisation of two new nu(3)-octahedral bimetallic clusters with the general [Ni(44-x)M(x)(CO)(48)](6-) (M = Pd, x = 8; M = Pt, x = 9) formula is reported. The [Ni(35)Pt(9)(CO)(48)](6-) cluster was obtained in reasonable yields (56 % based on Pt) by reaction of [Ni(6)(CO)(12)](2-) with 1.1 equivalents of Pt(II) complexes, in ethyl acetate or THF as the solvent. The [Ni(36)Pd(8)(CO)(48)](6-) cluster was obtained from the related reaction with Pd(II) salts in THF, and was isolated only in low yields (5-10 % based on Pd), mainly because of insufficient differential solubility of its salts. The unit cell of the [NBu(4)](6)[Ni(35)Pt(9)(CO)(48)] salt contains a substitutionally Ni-Pt disordered [Ni(24)(Ni(14-x)Pt(x))Pt(6)(CO)(48)](6-) (x = 3) hexaanion. A combination of crystal and molecular disorder is necessary to explain the disordering observed for the Ni/Pt sites. The unit cell of the corresponding [Ni(36)Pd(8)(CO)(48)](6-) salt contains two independent [Ni(30)(Ni(8-x)Pd(x))Pd(6)(CO)(48)](6-) (x = 2) hexaanions. The two display similar substitutional Ni-Pd disorder, which probably arises only from crystal disorder. The structure of [Ni(36)Pd(8)(CO)(48)](6-) establishes the first similarity between the chemistry of Ni-Pd and Ni-Pt carbonyl clusters. A comparison of the chemical and electrochemical properties of [Ni(35)Pt(9)(CO)(48)](6-) with those of the related [Ni(38)Pt(6)(CO)(48)](6-) cluster shows that surface colouring of the latter with Pt atoms decreases redox as well as protonation propensity of the cluster. In contrast, substitution of all internal Pt and two surface Ni with Pd atoms preserves the protonation behaviour and is only detrimental with respect to its redox aptitude. A qualitative rationalisation of the different surface-site selectivity of Pt and Pd, based on distinctive interplays of M--M and M--CO bond energies, is suggested.     

Generation and coupling of [Mn(dmpe)2(C triple bond CR)(C triple bond C)]* radicals producing redox-active C4-bridged rigid-rod complexes

The symmetric d(5) trans-bis-alkynyl complexes [Mn(dmpe)(2)(C triple bond CSiR(3))(2)] (R = Me, 1 a; Et, 1 b; Ph, 1 c) (dmpe = 1,2-bis(dimethylphosphino)ethane) have been prepared by the reaction of [Mn(dmpe)(2)Br(2)] with two equivalents of the corresponding acetylide LiC triple bond CSiR(3). The reactions of species 1 with [Cp(2)Fe][PF(6)] yield the corresponding d(4) complexes [Mn(dmpe)(2)(C triple bond CSiR(3))(2)][PF(6)] (R = Me, 2 a; Et, 2 b; Ph, 2 c). These complexes react with NBu(4)F (TBAF) at -10 degrees C to give the desilylated parent acetylide compound [Mn(dmpe)(2)(C triple bond CH)(2)][PF(6)] (6), which is stable only in solution at below 0 degrees C. The asymmetrically substituted trans-bis-alkynyl complexes [Mn(dmpe)(2)(C triple bond CSiR(3))(C triple bond CH)][PF(6)] (R = Me, 7 a; Et, 7 b) related to 6 have been prepared by the reaction of the vinylidene compounds [Mn(dmpe)(2)(C triple bond CSiR(3))(C=CH(2))] (R = Me, 5 a; Et, 5 b) with two equivalents of [Cp(2)Fe][PF(6)] and one equivalent of quinuclidine. The conversion of [Mn(C(5)H(4)Me)(dmpe)I] with Me(3)SiC triple bond CSnMe(3) and dmpe afforded the trans-iodide-alkynyl d(5) complex [Mn(dmpe)(2)(C triple bond CSiMe(3))I] (9). Complex 9 proved to be unstable with regard to ligand disproportionation reactions and could therefore not be oxidized to a unique Mn(III) product, which prevented its further use in acetylide coupling reactions. Compounds 2 react at room temperature with one equivalent of TBAF to form the mixed-valent species [[Mn(dmpe)(2)(C triple bond CH)](2)(micro-C(4))][PF(6)] (11) by C-C coupling of [Mn(dmpe)(2)(C triple bond CH)(C triple bond C*)] radicals generated by deprotonation of 6. In a similar way, the mixed-valent complex [[Mn(dmpe)(2)(C triple bond CSiMe(3))](2)(micro-C(4))][PF(6)] [12](+) is obtained by the reaction of 7 a with one equivalent of DBU (1,8-diazabicyclo[5.4.0]undec-7-ene). The relatively long-lived radical intermediate [Mn(dmpe)(2)(C triple bond CH)(C triple bond C*)] could be trapped as the Mn(I) complex [Mn(dmpe)(2)(C triple bond CH)(triple bond C-CO(2))] (14) by addition of an excess of TEMPO (2,2,6,6-tetramethyl-1-piperidinyloxy) to the reaction mixtures of species 2 and TBAF. The neutral dinuclear Mn(II)/Mn(II) compounds [[Mn(dmpe)(2)(C triple bond CR(3))](2)(micro-C(4))] (R = H, 11; R = SiMe(3), 12) are produced by the reduction of [11](+) and [12](+), respectively, with [FeCp(C(6)Me(6))]. [11](+) and [12](+) can also be oxidized with [Cp(2)Fe][PF(6)] to produce the dicationic Mn(III)/Mn(III) species [[Mn(dmpe)(2)(C triple bond CR(3))](2)(micro-C(4))][PF(6)](2) (R = H, [11](2+); R = SiMe(3), [12](2+)). Both redox processes are fully reversible. The dinuclear compounds have been characterized by NMR, IR, UV/Vis, and Raman spectroscopies, CV, and magnetic susceptibilities, as well as elemental analyses. X-ray diffraction studies have been performed on complexes 4 b, 7 b, 9, [12](+), [12](2+), and 14.