用于高性能铅离子选择电极的含氮有机物载体

本文系统地综述高性能铅离子选择电极中掺杂于膜内的含氮有机物铅离子传感载体,如双席夫碱、吡啶酰胺、酰羟胺、苯腙,以及载体分子结构特征与铅离子电极性能之间的关系。电极对铅离子的选择性能与载体分子结构密切相关,无论是在载体还是在膜基体中引入氰基都可以明显改善铅离子电极探测下限;加强传感机理的深入研究,为高性能载体的研究指明方向。     

革除或减少增塑剂的敏感膜离子选择电极

基于国内外最新研究工作,系统总结了离子选择电极膜中革除或减少外增塑剂的新膜基体,包括丙烯酸酯类聚合物、羟基功能化的乙烯基树脂、聚氨酯、硅橡胶以及导电聚合物,对其物理化学性能以及传感器检测等进行了全面归纳与讨论.指出该类革除外增塑剂的传感膜不仅避免了增塑剂的泄漏及其对生物样品的污染,而且较传统增塑聚氯乙烯(PVC)膜扩散系数降低了约3个数量级,有利于抑制过膜离子流,使其检测下限较传统增塑PVC下降了5个数量级,且选择系数也有不同程度的改善.另外,该类传感膜材料由于与固体支撑材料间优良的粘附性保证了电极的使用寿命,特别是在微型化固态电极中.以这类传感膜构建的电位型离子传感器将以其独特的优势在环境监测、食品卫生,尤其是在医疗诊断、生物物质检测中展示出不可替代的作用.     

基于导电聚吡咯生物电化学传感器的研究进展

导电聚合物具有良好的导电性能,可以作为分子导线使电子在生物活性物质与电极间直接传递,是构建生物传感器的一种新型材料.聚吡咯(PPy)具有导电性、生物相容性、易固定等特点,在传感器中用于固定生物活性物质有着良好的应用前景.该文简要介绍了导电聚吡咯的合成方法及掺杂机理,重点评述了聚吡咯用于固定生物活性物质构建生物传感器的多...     

新型导电聚合物-聚吡咯溴离子化学传感器

本文用电化学方法把导电聚合物聚吡咯(PPy)修饰在玻碳(GC)电极上, 研究了Br^-离子的掺杂效应和薄膜电极的电化学行为, 研制一种新型Br^-离子选择电极, 电极的响应机制是基于导电聚合物中阴离子的掺杂效应, 详细研究了聚合条件对电极电位响应性能的影响, 电极具有内阻小、响应快、抗毒化能力强、制备简便等优点, 电极对1x10^-^1-x10^-^4MBr^-呈能斯特响应, 检测下限7x10^-^5M, 斜率61mV/PBr^-。本文结果是化学修饰电极技术在化学传感器方面应用的有意义的尝试, 薄膜的良好导电性质使之更易于制备离子敏感电子学器件和生物电子学器件。     

离子液体应用于电合成导电聚合物*

自20世纪70年代导电聚合物发现以来,聚吡咯、聚苯胺、聚噻吩、聚（3,4-乙撑二氧噻吩）、聚对苯及其衍生物等,以其特殊的电子、电化学、光学性质以及巨大应用潜力受到广泛关注。离子液体是一类在室温或接近室温时呈液态的离子化合物,作为一类环境友好的新型绿色溶剂,具有很多独特的物理化学性质。本文综述了离子液体作为反应介质、支持电解质、测试介质以及离子液体参与形成的聚集体,在导电聚合物的电化学合成以及电化学性质测试中的研究进展,并展望了发展趋势。     

2009Pittcon会议(Ⅱ)

传感器与传感整合系统组的报告有:(1)Ashvarev,应用脉冲电极作离子选择电极的无偏压选择性测定;(2)R de Marco,离子选择性原子X显微术--一种新的材料鉴定技术;(3)S P Kounares,应用离子选择性电极分析火星表面;(4)M DPietrazak,以Rh(Ⅲ)络合物为基础的选择性测定NO2-的电化与学光传感器;(5)E Baker,聚合物膜离子传感器的电化激发;(6)A Raclu,应用电化阻抗谱探测离子选择膜的功能性质与程度;(7)MGratzl,在活体民试管中进行以光极为基础的银传感器试验,应用于型小实验室中的动物代谢监测.     

芳香族二胺聚合物修饰电极对痕量重金属离子的络合与探测

电合成的芳香族二胺聚合物链中存在大量自由氨基和亚氨基,由其自组装而成的修饰电极可以和重金属离子如Ag^ 、Pb^2 、Hg^2 、Cu^2 形成络合物,进而实现对痕量重金属离子的富集与探测。该修饰电极对Ag^ 和Pb^2 的探测呈现极好的线性关系,线性相关系数在0．998左右,探测极限分别可低达10mmol/L和0．15μmol/L。电极上修饰聚合物膜厚度、富集时间、pH、共存金属离子等因素都会影响重金属的富集和探测。芳香族二胺聚合物修饰电极在痕量金属离子的探测、污水处理乃至重金属离子传感等方面都显示出极大的应用潜力。     

磷钼酸掺杂的聚吡咯薄膜电极的表征

对离子在导电聚合物修饰电极中起着很重要的作用．因止匕自从导电聚合物薄膜修饰电极的研究开始以来，A们尝试了在导电聚合物膜中掺杂各种各样的离子［‘一句，以使导电聚合物膜向功能化方向发展．在这些众多的掺杂离子中，人们无感兴趣的是将那些电活性阴离子作对离子掺杂人导电聚合物膜中，如时C叫6【‘，司、杂多酸根离子”河等·将电活性阴离子作为对离子掺杂人导电聚合物膜修饰电极中，有助于人们对这种修饰电极的研究，因为这些对离子可以作为一种探针来检测对离子在腰中的传输情况．杂多酸掺杂的导电聚合物电极还具有电催化性能，对…     

聚合物在离子选择电极上的应用

本文概述了聚合物膜离子选择电极的发展、制备、应用等方面的研究情况。分别对固态膜类和液膜类聚合物膜离子选择电极的优缺点和发展前景进行了分析,并讨论了聚合物在膜电极中的作用,以及聚合物的结构对膜电极性能的影响。     

离子液体中吡咯的电化学聚合及性质研究

以1-丁基-3-甲基咪唑六氟磷酸盐离子液体作为溶剂和支持电解质,分别在铂电极和导电玻璃电极上电化学聚合得到了聚吡咯,聚合过程中发现,在离子液体中聚合的循环伏安图,其电流的变化和传统有机溶剂中的不同,通过交流阻抗技术研究了修饰电极的电化学性质,采用在线紫外、拉曼、红外谱对聚吡咯进行了光谱表征,得到了聚吡咯的特征峰,采用扫描电镜研究了聚合物的形貌。最后将修饰电极应用到了对对苯二酚的催化反应当中,显示了一定的催化作用。     

液晶金属配位聚合物的合成及性能

基于国内外最新研究文献 ,系统论述了近年来液晶金属配位聚合物的合成方法、液晶行为及应用前景。指出液晶金属配位聚合物的合成方法可归纳为直接配位法、单体配位法、交联配位法和聚合物反应法四种。液晶金属配位聚合物一般呈现热致液晶行为 ,显示稳定的向列液晶相或近晶液晶相。有些金属配位聚合物还呈现互变性近晶态或单变液晶性。液晶金属配位聚合物具有金属的特殊性质 ,是一种新型高性能磁导、电导和光导材料 ,可望应用于液晶显示材料、磁性信息储存薄膜材料、润滑剂和各向异性催化剂等。     

Recent trends in potentiometric sensor arrays--a review

Nowadays there exists a large variety of ion sensors based on polymeric or solid-state membranes that can be used in a sensor array format in many analytical applications. This review aims at providing a critical overview of the distinct approaches that were developed to build and use potentiometric sensor arrays based on different transduction principles, such as classical ion-selective electrodes (ISEs) with polymer or solid-state membranes, solid-contact electrodes (SCE) including coated wire electrodes (CWE), ion-sensitive field-effect transistors (ISFETs) and light addressable potentiometric sensors (LAPS). Analysing latest publications on potentiometric sensor arrays development and applications certain problems are outlined and trends are discussed.     

A survey on structure and properties of polymers with metal-like conductivity

The structure of conducting polymers is discussed in comparison to simple, so-called organic metals derived from naphthalene and similar arenes. In this context the conducting polymers are viewed as ion-radical salts of the backbone-units. This view is substantiated by recent results from X-ray investigations on electro-chemically oxidized p-quaterphenyl as a model for poly (p-phenylene), polypyrrol salts of detergent ions and oxidized, highly oriented polyacetylene. The stability and other properties related to possible applications can be understood based on these structural and chemical evaluations.     

A ladder conjugated polymer transducer for solid-contact Cu2+-selective electrodes

In recent years, there has been a pronounced interest in solid-contact ion-selective electrodes （SC-ISEs）, with emphasis on the use of conducting polymers as ion-to-electron transducer. In this work, a ladder conjugated polymer, thieno[3,2-b]thiophene （LCPT）, was investigated in fabricating Cu2＋-selective electrodes for the first time. The resulting electrodes were characterized by electrochemical impedance spectroscopy （EIS）, chronopotentiometry, and the water layer test. Results proved that the active LCPT facilitates the ion-to-electron transduction, and avoids the detrimental aqueous layer formed at the interface of SC-ISEs.     

Conducting polymers in chemical sensors and arrays

The review covers main applications of conducting polymers in chemical sensors and biosensors. The first part is focused on intrinsic and induced receptor properties of conducting polymers, such as pH sensitivity, sensitivity to inorganic ions and organic molecules as well as sensitivity to gases. Induced receptor properties can be also formed by molecularly imprinted polymerization or by immobilization of biological receptors. Immobilization strategies are reviewed in the second part. The third part is focused on applications of conducting polymers as transducers and includes usual optical (fluorescence, SPR, etc.) and electrical (conductometric, amperometric, potentiometric, etc.) transducing techniques as well as organic chemosensitive semiconductor devices. An assembly of stable sensing structures requires strong binding of conducting polymers to solid supports. These aspects are discussed in the next part. Finally, an application of combinatorial synthesis and high-throughput analysis to the development and optimization of sensing materials is described.     

Real-time probing of the growth dynamics of nanoparticles using potentiometric ion-selective electrodes

This Communication demonstrates the ability of potentiometric ion-selective electrodes (ISE) to probe the growth dynamics of metal nanoparticles in real-time. The new monitoring capability is illustrated using a solid-contact silver ISE for monitoring the hydroquinone-induced precipitation of silver on gold nanoparticle seeds. Potential-time recordings obtained under different conditions are used to monitor the depletion of the silver ion during the nanoparticle formation and shed useful insights into the growth dynamics of the nanoparticles. Such potentiometric profiles correlate well with the analogous optical measurements. The new real-time electrochemical probing of the particle growth process reflects the direct, rapid and sensitive response of modern ISE to changes in the level of the precipitated metal ion from the bulk solution and holds considerable promise for probing the preparation of different nanoscale materials.     

聚萘二胺的合成及其对重金属离子的高效反应吸附

聚萘二胺是继聚苯胺和聚吡咯之后的又一类新型导电高分子,因聚合物中含有活性 的自由胺基和亚胺基而具有新的多功能性.作者根据近期研究工作和国外最新文献,系统论述了聚1,8-、1,5-、2,3-萘二胺的化学氧化合成和电化学氧化合成及其对重金属离子的络合和还原吸附功能,详细比较了两种聚合方法的特点. 指出通过萘二胺的电化学氧化聚合可以方便地获得对重金属离子如Ag⁺、Pb²⁺、Hg²⁺、Cu²⁺、VO²⁺敏感的修饰电极,而通过化学 氧化聚合可以高产率地获得对Ag+具有极大的还原吸附容量的聚合物颗粒.聚萘二胺在痕量 金属离子的分析与探测、工业废水中贵金属离子的回收和重金属离子的清除等领域展现了广阔的应用前景.     

K-Selective Solid-Contact Electrodes Based on Electron-Conducting Polymers

K-Selective solid-contact electrodes with potential-stabilizing transient layers based on two different electron-conducting polymers, poly(3-octyl)thiophene, polyaniline, and also on their mixture are developed. These electrodes are characterized by the operation limits, selectivity, and stability of the potentiometric response as well as by their electrochemical impedance.     

A portable wireless-sensor system from all-in-one sensor array based hybrid solid contact layer for point-of-care ion monitoring in river basin

The sensor arrays are considered as a promising way to aim at point-of-care (POC) testing for the detection of different ions in environment through the use of solid-contact ion-selective electrodes (SC-ISEs). However, the exorbitant equipment and intricate process for the production of SC-ISEs arrays has limit its application. Herein, the Au with nano-branched structure (Au NBS) and poly (3,4-ethylenedioxythiophene): poly (styrenesulfonate) (PEDOT : PSS) were decorated on the surface of bare pad of traditional printed circuit boards coated with Au (Au-PCB) to construct a hybrid solid-contact layer including double-layer capacitance and pseudocapacitance of SC-ISEs synergistically, thus the multichannel SC-ISEs exhibited high stability and specificity. Overall, based on portable multichannel sensor and homemade APP (Ion Analysis), a wireless all-in-one sensor system was constructed to detect ions with the limit of NO₃⁻, Cl⁻, Na⁺, K⁺, Ca²⁺ and Mg²⁺ as 0.047 mM, 0.039 mM, 0.022 mM, 0.066 mM, 0.045 mM and 0.024 mM, respectively. Besides, it can detect such ions in river basin successfully. With the cost of each electrode less than 0.5 $, this sensor arrays enable a wide range of hazardous ion monitoring in water environment.     

Implementation of a Chloride‐selective Electrode Into a Closed Bipolar Electrode System with Fluorimetric Readout

Applicability of a bipolar electrode system was tested for arrangements containing a typical ion‐selective electrode (ISE) connected with an electrode coated by a conducting polymer characterized by electroluminescence. In this case a selective response of the ISE membrane at one pole of the bipolar electrode is transduced to a fluorimetric signal obtained by reduction of the conducting polymer at the second pole. This signal transformation mode was studied on example of a simple closed bipolar electrode system composed of all‐solid‐state chloride‐selective electrode with polypyrrole transducer as the sensing pole and the reporting pole represented by electrode coated by poly(3‐octylthiophene) (POT) layer characterized by fluorescence in the neutral state. In this system selective and linear dependences of fluorimetric signal on logarithm of chloride ions concentration in turn‐on mode were recorded for optimized external voltage applied. Alternatively, a concept of cascade bipolar electrode system with incorporation of additional bipolar electrode being a polarization source for the sensing bipolar electrode with ISE and POT layer was also tested. A significant advantage of the cascade system is its possibility to work spontaneously without external polarization. For this case also linear calibration plots of fluorimetric signal vs. logarithm of analyte concentration were recorded.