In-situ characterization of self-assembled monolayers of water-soluble oligo(ethylene oxide) compounds

In-situ spectroscopic ellipsometry (SE) was utilized to examine the formation of the self-assembled monolayers (SAMs) of the water-soluble oligo(ethylene oxide) [OEO] disulfide [S(CH(2)CH(2)O)(6)CH(3)](2) {[S(EO)(6)](2)} and two analogous thiols - HS(CH(2)CH(2)O)(6)CH(3) {(EO)(6)} and HS(CH(2))(3)O(CH(2)CH(2)O)(5)CH(3) {C(3)(EO)(5)} - on Au from aqueous solutions. Kinetic data for all compounds follow simple Langmuirian models with the disulfide reaching a self-limiting final state (d=1.2nm) more rapidly than the full coverage final states of the thiol analogs (d=2.0nm). The in-situ ellipsometric thicknesses of all compounds were found to be nearly identical to earlier ex-situ ellipsometric measurements suggesting similar surface coverages and structural models in air and under water. Exposure to bovine serum albumin (BSA) shows the self-limiting (d=1.2nm) [S(EO)(6)](2) SAMs to be the most highly protein resistant surfaces relative to bare Au and completely-formed SAMs of the two analogous thiols and octadecanethiol (ODT). When challenged with up to near physiological levels of BSA (2.5mg/mL), protein adsorption on the final state [S(EO)(6)](2) SAM was only 3% of that which adsorbed to the bare Au and ODT SAMs.     

Structure and dynamics of water near the interface with oligo(ethylene oxide) self-assembled monolayers

We performed molecular dynamics simulations of the oligo(ethylene oxide) (OEO) self-assembled monolayers in water to determine the nature of the systems' interfacial structure and dynamics. The density profiles, hydrogen bonding, and water dynamics are calculated as a function of the area per molecule A of OEO. At the highest coverages, the interface is hydrophobic, and a density drop is found at the interface. The interfacial region becomes more like bulk water as A increases. The OEO and water become progressively more mixed, and hydrogen bonding increases within the interfacial region. Water mobility is slower within the interfacial region, but not substantially. The implications of our results on the resistance of OEO SAMs to protein adsorption are discussed. Our principal result is that as A increases the increasingly waterlike interfacial region provides a more protein-resistant surface. This finding supports recent experimental measurements that protein resistance is maximal for less than full coverage on Au.     

Self-assembled monolayers of clamped oligo(phenylene-ethynylene-butadiynylene)s

Rigid rod oligo(phenylene-ethynylene-butadiynylene)s (oPEBs), "half-rings" of two rigid rods connected via a molecular clamp unit, and shape-persistent macrocycles (cyclic "half-ring dimers") are synthesized and their self-assembled monolayers (SAMs) are investigated by scanning tunneling microscopy (STM) at the interface of 1,2,4-trichlorobenzene (TCB)/highly oriented pyrolytic graphite (HOPG). The results are important for the design of molecular building blocks for two-dimensional nanoscale architectures on solid surfaces.     

Functional monolayers for improved resistance to protein adsorption: oligo(ethylene glycol)-modified silicon and diamond surfaces

The interaction of proteins with semiconductors such as silicon and diamond is of great interest for applications such as electronic biosensing. We have investigated the use of covalently bound oligo(ethylene glycol), EG, monolayers on diamond and silicon to minimize nonspecific protein adsorption. Protein adsorption was monitored by fluorescence scanning as a function of the length of the ethylene glycol chain (EG3 through EG6) and the terminal functional group (methyl- versus hydroxyl-terminated EG3 monolayer). More quantitative measurements were made by eluting adsorbed avidin from the surface and measuring the intensity of fluorescence in the solution. The attachment chemistry of the tri(ethylene glycol) molecules and monolayer orientation was studied by X-ray photoelectron spectroscopy. Improvement in the selectivity of surfaces modified with EG functionality was demonstrated in two model biosensing assays. We find that high-quality EG monolayers are formed on silicon and diamond and that these EG3 monolayers are as effective as EG3 self-assembled monolayers on gold at resisting nonspecific avidin adsorption. These results show promise for use of silicon and diamond materials in many potential applications such as biosensing and medical implants.     

Photopolymerization kinetics of oligo(ethylene oxide) and oligo(methylene) oxide dimethacrylates

The influence of temperature on the photopolymerization kinetics of oligo(methylene) oxide and oligo(ethylene oxide) dimethacrylate series has been investigated by isothermal DSC. The DSC curves showed a rapid rise in rate due to the Trommsdorff effect, and then a slow decline. A shoulder, apparent on many of the DSC curves at low conversions, became more prominent when the cure temperature was lowered. The kinetics were relatively insensitive to the dimethacrylate structure in the early stages of the reaction, but became more dependent as the reaction proceeded. A previously derived mathematical model, which allows for the influence of diffusion on the rate constants, was used to predict the kinetics. The dependence of the maximum rate and conversion on the curing temperature were adequately described by the model. The experimentally observed shoulder on the rate curve was also predicated as was the evolution of the rate/time curves with curing temperature. Similar predictions were found when a nonsteady state version of the model was used. The radiation intensity exponent varied from 0.3 to 0.6 possibly due to chain-length effects and pseudo-first order termination, respectively. The final degree of conversion increased with curing temperature (T_cure) and was correlated with the flexibility of the dimethacrylate. These data were fitted to a theoretical expression relating the final conversion to the resin T_g and to the T_cure. © 1993 John Wiley & Sons, Inc.     

Strong resistance of oligo(phosphorylcholine) self-assembled monolayers to protein adsorption

In this work, we demonstrate the strong resistance of oligo(phosphorylcholine) (OPC) self-assembled monolayers (SAMs) to protein adsorption and cell adhesion. OPC SAMs were characterized using X-ray photoelectron spectroscopy (XPS), and protein adsorption was measured using a surface plasmon resonance (SPR) sensor. Results are compared with those of phosphorylcholine (PC) SAMs. Despite the existence of negative charge on OPC SAMs and the simple synthesis procedure of OPC thiols, OPC SAMs resist protein adsorption as effectively as or better than PC SAMs formed from highly purified PC thiols. The ease of their preparation and the effectiveness of their function make OPC SAMs an attractive alternative for creating nonfouling surfaces.     

Kinetic comparison of isomeric oligo(ethylene oxide) (meth)acrylates: Aqueous polymerization of oligo(ethylene oxide) methyl ether methacrylate and methyl 2-(oligo(ethylene oxide) methyl ether)acrylate macromonomers

The photoinduced energy/electron transfer-reversible addition-fragmentation chain transfer (PET-RAFT) polymerizations of oligo(ethylene oxide) monomethyl ether methacrylate (OEOMA, also known as poly[ethylene glycol] methyl ether methacrylate, PEGMA) and isomeric methyl 2-(oligo(ethylene oxide) methyl ether)acrylate (2OEOAM) macromonomers with OEO average degree of polymerization of 22 or 45 were conducted in aqueous media to provide insight into the effect of monomer structure on grafting-through RAFT of 1,1-disubstituted acrylic macromonomers. The polymerizations of all four monomers reached nearly quantitative conversion. The longer macromonomers polymerized faster than the shorter ones within the same monomer class. The OEO side chain at the α (i.e., 2-) position of isomeric acrylates significantly slowed RAFT polymerization in comparison with OEO ester side chain of methacrylates.     

Synthesis and characterization of monolayers and Langmuir-Blodgett films of an amphiphilic oligo(ethylene glycol)-C60-hexadecaaniline conjugate

A novel amphiphilic oligo(ethylene glycol)-C60-hexadecaaniline (A16) tricomponent conjugate, C60>(A16-EG43), possessing a well-defined number of repeating aniline donor units and a hydrophilic ethylene glycol oligomer chain was synthesized. The compound is composed of a covalently bound donor-acceptor chromophore structure. Molecular self-assembly of C60>(A16-EG43) at the air-water interface formed a densely packed Langmuir monolayer with all highly hydrophobic fullerene cages located above the liquid interface. The monolayer can then be transferred onto a glass substrate via Langmuir-Blodgett (LB) deposition. LB multilayered thin films formed by multiple deposition of the monolayer yielded broadened optical absorption peaks extending beyond 600 nm into the 950 nm region, suggesting strong intermolecular interactions among the C60 cages and the A16 moieties. An X-ray reflectometry study clearly reveals that the Langmuir film at the air-water interface consists of a C60 top layer and a bottom layer containing hexcadecaaniline and oligo(ethylene glycol) with gradually decreasing electron density over a distance of approximately 130 A above bulk water. The pressure isotherm shows that the packing density of the C60>(A16-EG43) monolayer, corresponding to a molecular area of approximately 95 A2/molecule, is similar to that of the surface area of the C60 monolayer. This result suggests that C60 packing plays a dominant role in guiding the formation of the monolayer structure. Further photoexcitation of hexadecaaniline moieties of aligned (C60>)-A16 layers by a flash light source induces cross linking between adjacent A16 segments forming an interlinked A16 array. Our results have demonstrated a unique fabrication method for preparing the aligned donor-acceptor array using strong intermolecular interactions between fullerenes as the molecular orientation guiding force in the Langmuir-Blodgett technique.     

Synthesis and characterization of poly(phenylacetylene)s carrying oligo(ethylene oxide) pendants

A group of new amphiphilic poly(phenylacetylene)s bearing polar oligo(ethylene oxide) pendants, poly{4‐[2‐(2‐hydroxyethoxy)ethoxy]phenylacetylene} ( 1 ), poly(4‐{2‐[2‐(2‐hydroxyethoxy)‐ethoxy]ethoxy}phenylacetylene) ( 2p ), poly(3‐{2‐[2‐(2‐hydroxyethoxy)ethoxy]ethoxy}phenylacetylene) ( 2m ), poly(4‐{2‐[2‐(2‐methanesulfonyloxyethoxy)ethoxy]ethoxy}phenylacetylene) ( 3 ), poly(4‐{2‐[2‐(p‐toluenesulfonyloxyethoxy)ethoxy]ethoxy}phenylacetylene) ( 4 ), poly(4‐{2‐[2‐(2‐trimethylsilyloxy‐ethoxy)ethoxy] ethoxy}phenylacetylene) ( 5 ), and poly(4‐{2‐[2‐(2‐chloroethoxy)ethoxy]ethoxy}phenylacetylene) ( 6 ), were synthesized with organorhodium complexes as the polymerization catalysts. The structures and properties of the polymers were characterized with IR, UV, NMR, and thermogravimetric analysis. 1 , 2p , and 2m , the three polymers containing pendants with hydroxyl groups, were oligomeric or insoluble. The organorhodium complexes worked well for the polymerization of the monomers without hydroxyl groups, giving soluble polymers 3 – 6 with a weight‐average molecular weight up to ～160 × 10³ and a yield up to 99%. Z‐rich polymers 3 – 6 could be prepared by judicious selections of the catalyst under optimal conditions. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1153–1167, 2006     

Nanofibers from self-assembly of an aromatic facial amphiphile with oligo(ethylene oxide) dendrons

Novel block facial amphiphiles consisting of a laterally extended aromatic segment and oligo(ethylene oxide) dendrons as a flexible segment were synthesized in a stepwise fashion and their aggregation behavior was investigated in aqueous solution; self-assembly into elongated nanofibers with a uniform diameter of 7 +/- 0.5 nm and lengths up to several hundred nanometers was observed.     

Molecular simulation study of water interactions with oligo (ethylene glycol)-terminated alkanethiol self-assembled monolayers

Molecular simulations were performed to study a system consisting of protein (e.g., lysozyme) and self-assembled monolayers (SAMs) terminating with different chemical groups in the presence of explicit water molecules and ions. Mixed SAMs of oligo (ethylene glycol) [S(CH2)4(OCH2CH2)4OH, (OEG)] and hydroxyl-terminated SAMs [S(CH2)4OH] with a mole fraction of OEG at chiOEG = 0.2, 0.5, 0.8, and 1.0 were used in this study. In addition, methyl-terminated SAMs [S(CH2)11CH3] were also studied for comparison. The structural and dynamic behavior of hydration water, the flexibility and conformation state of SAMs, and the orientation and conformation of protein were examined. Simulation results were compared with those of experiments. It appears that there is a correlation between OEG surface resistance to protein adsorption and the surface density of OEG chains, which leads to a large number of tightly bound water molecules around OEG chains and the rapid mobility of hydrated SAM chains.     

Gold nanoparticles decorated with oligo(ethylene glycol) thiols: protein resistance and colloidal stability

The interactions between proteins and gold colloids functionalized with protein-resistant oligo(ethylene glycol) (OEG) thiol, HS(CH2)11(OCH2CH2)6OMe (EG6OMe), in aqueous solution have been studied by small-angle X-ray scattering (SAXS) and UV-vis spectroscopy. The mean size, 2R, and the size distribution of the decorated gold colloids have been characterized by SAXS. The monolayer-protected gold colloids have no correlations due to the low volume fraction in solution and are stable in a wide range of temperatures (5-70 degrees C), pH (1.3-12.4), and ionic strength (0-1.0 M). In contrast, protein (bovine serum albumin) solutions with concentrations in the range of 60-200 mg/mL (4.6-14.5 vol %) show a pronounced correlation peak in SAXS, which results from the repulsive electrostatic interaction between charged proteins. These protein interactions show significant dependence on ionic strength, as would be expected for an electrostatic interaction (Zhang et al. J. Phys. Chem. B 2007, 111, 251). For a mixture of proteins and gold colloids, the protein-protein interaction changes little upon mixing with OEG-decorated gold colloids. In contrast, the colloid-colloid interaction is found to be strongly dependent on the protein concentration and the size of the colloid itself. Adding protein to a colloidal solution results in an attractive depletion interaction between functionalized gold colloids, and above a critical protein concentration, c*, the colloids form aggregates and flocculate. Adding salt to such mixtures enhances the depletion effect and decreases the critical protein concentration. The aggregation is a reversible process (i.e., diluting the solution leads to dissolution of aggregates). The results also indicate that the charge of the OEG self-assembled monolayer at a curved interface has a rather limited effect on the colloidal stabilization and the repulsive interaction with proteins.     

Synthesis and characterization of novel alternating fluorinated copolymers bearing oligo(ethylene oxide) side chains

The synthesis and characterization of novel poly(CTFE‐g‐oligoEO) graft copolymers [chlorotrifluoroethylene (CTFE) and ethylene oxide (EO)] are presented. First, vinyl ether monomers bearing oligo(EO) were prepared by transetherification of ω‐hydroxyoligo(EO) with ethyl vinyl ether catalyzed by a palladium complex in 70–84% yields. Two vinyl ethers of different molecular weights (three and 10 EO units) were thus obtained. Then, radical copolymerization of the above vinyl ethers with CTFE led to alternating poly(CTFE‐alt‐VE) copolymers that bore oligo(OE) side chains in satisfactory yields (65%). These original poly(CTFE‐g‐oligoEO) graft copolymers were characterized by ¹H, ¹⁹F, and ¹³C NMR spectroscopy. Their molecular weights reached 19,000 g mol^?1, and their thermal properties were investigated while their glass transition temperatures ranged between ?42 and ?36 °C. Their thermogravimetric analyses under air showed decomposition temperatures of 270 °C with 10% weight loss (T_d,10%). These novel copolymers are of potential interest as polymer electrolytes in lithium ion batteries, showing room temperature conductivities ranging from 4.49 × 10^?7 to 1.45 × 10^?6 S cm^?1 for unplasticized material. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Diruthenium compounds of thiol capped oligo(phenyleneethynyl) ligand: Synthesis and characterization

Reactions between Ru₂(DMBA)₄(NO₃)₂ and OPEn-S-TMSE ligand under weak base conditions afford trans-Ru₂(DMBA)₄(OPEn-S-TMSE)₂ compounds, where DMBA is N,N′-dimethylbenzamidinate, TMSE is trimethylsilylethylene, and OPEn are -CCC₆H₄- (1), -CC(2,5-(CH₃O)₂C₆H₂)-(CCC₆H₄)- (2) and -(CCC₆H₄)-CC(2,5-(CH₃O)₂C₆H₂)-(CCC₆H₄)- (3). Molecular structures of compounds 1 and 2 were determined by X-ray diffraction, which revealed the extended rigid rod topology and coplanarity of phenyleneethynye units in 1 and 2. Electrochemical and optical energy gaps of compounds 1-3 were estimated to be 1.57 eV and ca. 1.43 eV, respectively, from voltammetric and absorption spectral measurements.     

Self-assembled monolayers (SAMs) of carboxylic acids: an overview

The field of self-assembled monolayers (SAMs) of organic compounds on different substrates is of importance because it provides a suitable and efficient method of surface modification. The formation of robust, stable monolayers from carboxylic acids on two and three dimensional surfaces of different substrates have been reported. Carboxylic acids are promising class of organic compounds for monolayer formations where traditional alkanethiols or alkoxysilanes show limitations.     

Self-assembled monolayers of a bis(pyrazol-1-yl)pyridine-substituted thiol on Au(111)

Self-assembled monolayers (SAMs) of a bis(pyrazol-1-yl)pyridine-substituted thiol (bpp-SH) on Au (111)/mica were studied with scanning tunneling microscopy (STM), X-ray photoelectron spectroscopy (XPS), and near-edge X-ray absorption fine structure spectroscopy (NEXAFS). Using substrates precoated with perylene-3,4,9,10-tetracarboxylic acid dianhydride (PTCDA), preparation at elevated temperatures yields highly ordered layers whose structure is described by a rectangular (5 x radical3) unit cell containing one molecule. The bis(pyrazol-1-yl)pyridine (bpp) units exhibit pi-stacking along the 112 direction, and they are tilted significantly. We conclude the three imine nitrogen atoms in the bpp headgroup adopt a trans,trans arrangement.     

Reversible protein adsorption and bioadhesion on monolayers terminated with mixtures of oligo(ethylene glycol) and methyl groups

Surface-grafted, environmentally responsive polymers have shown great promise for controlling adsorption and desorption of macromolecules and cells on solid surfaces. In the paper, we demonstrate that certain mixed self-assembled monolayers (SAMs) of oligo(ethylene glycol) (OEG) and methyl-terminated alkanethiolates on gold form surfaces with switchable hydrophobicity and tendency for protein adsorption and cellular attachment. At temperatures above 32 degrees C, SAMs with a surface density of approximately 50% OEG adsorbed significant amounts of pyruvate kinase and lysozyme, whereas below this temperature, these same SAMs were resistant to the adsorption of these proteins. Furthermore, protein layers adsorbed to these SAMs above 32 degrees C were removed upon rinsing with water below this temperature. Similar results were seen for attachment and release of the marine bacterium, Cobetia marina. The change from nonresistance to adsorptive state of the SAMs was concomitant with a change in advancing water contact angle. Vibrational sum frequency generation spectroscopy suggests that the temperature-induced changes coincide with a disorder-to-partial order transition of the hydrated methylene chains of the OEG moieties within the SAMs. Mixed OEG-methyl SAMs represent both a convenient means of controlling macromolecular and cellular adsorption within the laboratory and a useful tool for relating adsorption properties to molecular structures within the SAMs.     

Crystallization kinetics of poly(ethylene oxide) from its melt and from mixtures with tetrahydronaphthalene and oligo(ethylene oxide‐block‐dimethylsiloxane)

The crystallization of poly(ethylene oxide) (PEO) from the pure state and from its mixtures with oligo(dimethyl siloxane‐b‐ethylene oxide) (COP) and tetrahydronaphthalene (THN) was investigated. The crystallization kinetics was studied isothermally and nonisothermally with an automated device that monitored the light passing through the corresponding liquids as functions of time and/or temperature. The rate was strongly influenced by the concentration of COP in the mixture. A substantial decrease in the induction time (the time required for the onset of crystallization) and a considerable shift in the crystallization temperature (the transition from a liquid state to a solid state) to higher temperatures were observed as the concentration of COP rose. This behavior was attributed to the differences in the interaction parameters of PEO with THN and COP. The isothermal crystallization kinetics was analyzed on the basis of the Avrami equation. Modified approaches (Avrami and Ozawa) were used for the evaluation of nonisothermal crystallization. In the initial state of crystallization, a power law held true for the augmentation of the radii of spherulites with time for all mixtures, regardless of the concentration of COP. Different spherulitic morphologies were observed, depending on the COP concentration. With rising COP contents, the structures changed from being needlelike to being compact. These findings were all examined in terms of the isothermal variation of the degree of supercooling resulting from changes in the compositions of the mixtures. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 820–829, 2004     

Protein resistance of (ethylene oxide)n monolayers at the air/water interface: effects of packing density and chain length

Protein adsorption on poly(ethylene oxide) (PEO) and oligo(ethylene oxide) (OEO) monolayers is studied at different packing densities using the Langmuir technique. In the case of a PEO monolayer, a protein adsorption minimum is revealed at sigma(-1) = 10 nm(2) for both lysozyme and fibrinogen. Manifested are two packing density regimes of steric repulsion and compressive attraction between PEO and a protein on top of the overall attraction of the protein to the air/water interface. The observed protein adsorption minimum coincides with the maximum of the surface segment density at sigma(-1) = 10 nm(2). However, OEO monolayer presents a different scenario, namely that the amount of protein adsorbed decreases monotonically with increasing packing density, indicating that the OEO chains merely act as a steric barrier to protein adsorption onto the air/water interface. Besides, in the adsorption of fibrinogen, three distinct kinetic regimes controlled by diffusion, penetration and rearrangement are recognized, whereas only the latter two were made out in the adsorption of lysozyme.     

Interaction of self-assembled monolayers of oligo(ethylene glycol)-terminated alkanethiols with water studied by vibrational sum-frequency generation

Vibrational sum-frequency generation (VSFG) was used to investigate the conformational changes in self-assembled monolayers (SAMs) of (1-mercaptoundec-11-yl) hexa(ethylene glycol) monomethylether (EG6-OMe) on gold when exposed to liquid water. VSFG spectra of the EG6-OMe SAMs were recorded before, during, and after exposure of the films to water and after a subsequent evacuation step. While in contact with water the entire ethylene glycol chains are found in a random, solvated state, after removal from the fluid water molecules remain absorbed only at the terminal groups of the film giving rise to distinct conformational changes. After evacuation, the structure of the EG6-OMe SAM reverts to its original state, indicating that water has been removed from the monolayer. Our findings support recent ab initio calculations and Monte Carlo simulations on the interaction of ethylene glycol-terminated monolayers with water.