Tungsten(VI) complexes with aminobis(phenolato) [O,N,O] donor ligands

The reaction between trisdiolatotungsten(VI) complex [W(eg)(3)] (1) (eg = 1,2-ethanediolato dianion) and phenolic ligand precursor methylamino-N,N-bis(2-methylene-4,6-dimethylphenol) (H(2)L(Me)) or methylamino-N,N-bis(2-methylene-4-methyl-6-tert-butylphenol) (H(2)L(tBu)) affords monomeric oxotungsten complex [WO(eg)(L(Me))] (2) or [WO(eg)(L(tBu))] (3), respectively. These complexes react further with chlorinating reagents, which leads to the displacement of ethanediolato ligands from the complex units and formation of cis and trans isomers of the corresponding dichloro complexes [WOCl(2)(L(Me))] (4) and [WOCl(2)(L(tBu))] (5), respectively. Identical dichloro complexes were also prepared by the reaction between the above-mentioned phenolic ligand precursors and [WOCl(4)]. Molecular structures of 3, cis-4, trans-4, and cis-5 were verified by X-ray crystallography. Complexes 2-5 can be activated by Et(2)AlCl to catalyze ring-opening metathesis polymerization of norbornene.     

Preparation and polymerization mechanism of dihydroxy-capped PCL,poly(CL-b-PEG-b-CL) and poly(DTC-b-CL-b-DTC)

PCL possesses a wide range of medical applications, such as tissue engineering and controlled drug release, because of its good biodegradability and miscibility. In order to extend the use of PCL, researchers have been exploring its structural and chemica…     

Magnetic, electrochemical and spectroscopic properties of iron(III) amine-bis(phenolate) halide complexes

Eight new iron(III) amine-bis(phenolate) complexes are reported. The reaction of anhydrous FeX(3) salts (where X = Cl or Br) with the diprotonated tripodal tetradentate ligands 2-tetrahydrofurfurylamino-N,N-bis(2-methylene-4,6-di-tert-butylphenol), H(2)L1, 2-tetrahydrofurfurylamino-N,N-bis(2-methylene-4-methyl-6-tert-butylphenol), H(2)L2, and 2-methoxyethylamino-N,N-bis(2-methylene-4,6-di-tert-butylphenol), H(2)L3, 2-methoxyethylamino-N,N-bis(2-methylene-4-methyl-6-tert-butylphenol), H(2)L4 produces the trigonal bipyramidal iron(III) complexes, L1FeCl (1a), L1FeBr (1b), L2FeCl (2a), L2FeBr (2b), L3FeCl (3a), L3FeBr (3b), L4FeCl (4a), and L4FeBr (4b). All complexes have been characterized using electronic absorption spectroscopy, cyclic voltammetry and room temperature magnetic measurements. Variable temperature magnetic data were acquired for complexes 2b, 3a and 4b. Variable temperature M?ssbauer spectra were obtained for 2b, 3a and 4b. Single crystal X-ray molecular structures have been determined for proligand H(2)L4 and complexes 1b, 2b, and 4b.     

Efficient double-strand cleavage of DNA mediated by Zn(II)-based artificial nucleases

Two water-soluble zinc complexes, [Zn(L)Cl(2)] (1) and [Zn(2)(L)(2)(μ-C(2)O(4))(H(2)O)(2)]·(ClO(4))(2)·CH(3)OH (2) (L = N,N-bis(2-pyridylmethyl)methylamine), were prepared to serve as nuclease mimics. The complexes were characterized by X-ray, IR and UV-vis spectroscopy as well as ESI-MS. The electrospray mass spectrum of 2 in solution indicates that dinuclear ion [Zn(2)(L)(2)(μ-C(2)O(4))(ClO(4))](+) (3) is the active species. UV-Vis absorption and fluorescence spectroscopy studies show that the complexes partially intercalate to CT-DNA. In the absence of reducing agent, supercoiled plasmid DNA cleavage by the complexes 1 and 3 was performed and the hydrolytic mechanism was demonstrated by adding standard radical scavengers.     

Ferromagnetic vs antiferromagnetic coupling in bis(mu-phenoxo)dicopper(II) complexes. Tuning of the nature of exchange coupling by remote ligand substituents

Two bis(mu-phenoxo)dicopper(II) complexes, [(L(CH3))(2)Cu(2)] (1) and [(L(t-Bu))(2)Cu(2)] (2), where L(CH3) and L(t-Bu) represent the dianions of (methylamino)-N,N-bis(2-methylene-4,6-dimethylphenol) and of (methylamino)-N,N-bis(2-methylene-4,6-di-tert-butylphenol), respectively, are reported to demonstrate the effect of remote substituents on the nature of exchange coupling interactions between the copper(II) centers. In contrast to 1, which is as usual antiferromagnetically coupled, complex 2 is a rare example of a ferromagnetically coupled diphenoxodicopper(II) complex.     

Catalytic alkylation of aryl Grignard reagents by iron(III) amine-bis(phenolate) complexes

Reaction of n-propylamino-N,N-bis(2-methylene-4-tert-butyl-6-methylphenol), H(2)L1, n-propylamino-N,N-bis(2-methylene-4,6-di-tert-butylphenol), H(2)L2, and benzylamino-N,N-bis(2-methylene-4-tert-butyl-6-methylphenol), H(2)L3, with anhydrous ferric chloride in the presence of base yields the products, [FeL1(μ-Cl)](2) (1), [FeL2(μ-Cl)](2) (2) and [FeL3(μ-Cl)](2) (3). In the solid state, these complexes exist as chloride-bridged dimers giving distorted trigonal bipyramidal iron(III) ions. Reaction of H(2)L1 with FeBr(3), however, results in the formation of a tetrahedral iron(III) complex possessing two bromide ligands. The amine-bis(phenolate) ligand is bidentate in this complex and bonds to the iron(III) ion via the phenolate O-donors. The central amine donor is protonated, resulting in a quaternized ammonium fragment and the iron(III) centre possesses a negative formal charge. As a result, this complex is zwitterionic and formulated as FeBr(2)L1H (4). Complex 1 is an air-stable, non-hygroscopic, single-component catalyst for C-C cross-coupling of aryl Grignard reagents with primary and secondary alkyl halides, including chlorides. Good to excellent yields of cross-coupled products are obtained in diethyl ether at room temperature. In some cases where low yields are obtained under these conditions, the use of microwave-assisted heating of the reaction mixture can improve yields.     

Controlled and highly effective ring-opening polymerization of α-chloro-ε-caprolactone using Zn- and Al-based catalysts

The present study details the highly effective and controlled ring-opening polymerization (ROP) of α-chloro-ε-caprolactone ( 1 , αClεCL), a cyclic ester that has been little explored thus far in ROP catalysis, using Zn- and Al-based catalysts [Zn(C₆F₅)₂(toluene)] ( 4 ), [N,N′-bis(3,5-di-tert-butylsalicylidene)1,3-diaminopropanato]aluminium(III)benzyloxide ( 5 ) and [N,N′-bis(3,5-di-tert-butylsalicylidene)1,3-diamino-2,2′-dimethylpropanato]aluminium(III)benzyloxide] ( 6 ). Chain-length-controlled PαClεCL material is produced under solution ROP conditions, as deduced from GPC, NMR, MALDI-TOF, and kinetic data. In contrast, the ROP of 1 is ill-defined under bulk ROP conditions due to partial thermal degradation of the polymer chain (presumably through C–Cl cleavage), reflecting the limited stability of PαClεCL. The Al Catalysts 5 and 6 are highly active ROP catalysts of αClεCL at room temperature (TOF up to 2,400 hr⁻¹) to afford well-defined P(αClεCL). In the case of Catalyst 6 , carrying out the ROP of αClεCL under immortal conditions (with BnOH as chain transfer agent) is clearly beneficial to ROP activity and control, with no apparent side-reaction of chloro-functionalized PCL chains as the ROP proceeds. The controlled character of these ROPs was further exploited for the production of chain-length-controlled PLLA-b-PαClεCL diblocks through sequential ROP of l -lactide and αClεCL, affording copolymers with improved thermal and biodegradable properties.     

Modulating the M-M distance in dinuclear complexes. New ligand with a 2,2'-Biphenol fragment as key unit: synthesis, coordination behavior, and crystal structures of Cu(II) and Zn(II) dinuclear complexes

The synthesis and characterization of the new polyamino-phenolic ligand 3,3'-bis[N,N-bis(2-aminoethyl)aminomethyl]-2,2'-dihydroxybiphenyl (L) are reported. L contains two diethylenetriamine units linked by a 1,1'-bis(2-phenol) group (BPH) on the central nitrogen atom which allows two separate binding amino subunits in a noncyclic ligand. The basicity and binding properties of L toward Cu(II) and Zn(II) were determined by means of potentiometric measurements in aqueous solution (298.1 +/- 0.1 K, I = 0.15 mol dm-3). L behaves as a pentaprotic base and as a monoprotic acid under the experimental conditions used, yielding the H5L5+ or H-1L- species, respectively. L forms both mono- and dinuclear species with both metal ions investigated; the dinuclear species are largely prevalent in aqueous solution with a L/M(II) molar ratio of 1:2 at pH higher than 7. L shows different behavior in Cu(II) and Zn(II) binding, affecting the dinuclear species formed and the distance between the two coordinated metal ions, which is greater in the Zn(II) than in the Cu(II) dinuclear species. This difference can be attributed to the different degree of protonation of BPH which influences the angle between the phenyl rings in the two systems. In this way, it is possible to modulate the M(II)-M(II) distance by the choice M(II) and to space the two M(II) farther away than was possible with the previously synthesized ligands. L does not saturate the coordination sphere of the coordinated M(II) ions in the dinuclear species, and thus, these latter species are prone to add guests. 1H and 13C NMR experiments carried out in aqueous solution, as well as the crystal structures of the dinuclear Cu(II) and Zn(II) species formed in aqueous solution, aided in elucidating the involvement of L and BPH in Zn(II) and Cu(II) stabilization.     

Preparation and polymerization mechanism of dihydroxy-capped PCL,poly(CL-<Emphasis Type="Italic">b</Emphasis>-PEG-<Emphasis Type="Italic">b</Emphasis>-CL) and poly(DTC-<Emphasis Type="Italic">b</Emphasis>-CL-<Emphasis Type="Italic">b</Emphasis>-DTC)

The ring opening polymerization of ε-caprolactone (CL) was initiated by glycol and yttrium tri(2,6-di-tert-butyl-4-methylphenolate)s (Y(OAr)₃), preparing dihydroxy-capped poly (ε-caprolactone) (PCL) with controllable molecular weight. ¹H NMR and SEC analyses indicate that two kinds of active species and corresponding PCL with different structures exist in the system. Increasing the ratio of glycol to Y(OAr)₃ benefits the formation of monofunctional active species. However, poly(ethylene glycol) (PEG)/Y(OAr)₃ system only contains sole bifunctional active species to synthesize copolymer of CL with PEG (poly(CL-b-PEG-b-CL)). Dihydroxycapped PCL as macroinitiator can further initiate the polymerization of 2,2-dimethyltrimethylene carbonate (DTC). Thus, triblock copolymer of CL with DTC (poly(DTC-b-CL-b-DTC)) has been prepared.     

Unsymmetrical N-Heterocyclic Carbene: 1-Isopropyl-3-benzylimidazol-2-ylidene as Catalyst for Ring-Opening Polymerization of ϵ-Caprolactone

An unsymmetrical N-heterocyclic carbene, namely 1-isopropyl-3-benzylimidazol-2-ylidene, is a highly active catalyst for ring-opening polymerization of ?-caprolactone (CL) to give polycaprolactone (PCL) with number average molecular weight (Mn) as high as 2.66 × 10⁴ at 0°C in 100 min in tetrahydrofuran (THF). The effects of monomer/initiator molar ratio ([M]/[I]), catalyst/initiator molar ratio ([C]/[I]), monomer concentration, as well as polymerization temperature and time have been investigated. The kinetic studies of CL polymerization have indicated that the polymerization rate is first-order with respect to both monomer and catalyst concentrations. The apparent activation energy amounts to 56.04 kJ/mol. The proposed mechanism is a monomer-activated process.     

Bimetallic aluminum complexes supported by bis(salicylaldimine) ligand: Synthesis,characterization and ring-opening polymerization of lactide

Two types of bifunctional bis(salicylaldimine) ligands (syn-L and anti-L) were designed and synthesized to support bimetallic aluminum complexes.Owing to the rigid anthracene skeleton,syn-L and anti-L successfully locked two Al centers in close proximity (syn-Al2) and far apart (anti-Al2),respectively.The distance between two Al centers in syn-Al2 was defined by X-ray diffraction as 6.665 (A),which is far shorter than that in anti-Al2.In the presence of stoichiometrical BnOH,syn-Al2 and anti-Al2 were both efficient for ring-opening polymerization (ROP) of rac-LA with the former being more active.In the presence of excess BnOH,syn-Al2 showed an efficient and immortal feature,consistent with high conversions,matched Mns,narrow molecular weight distributions and end group fidelity,while anti-Al2 had a much lower activity or even became entirely inactive due to rapid decomposition,indicated by in situ 1H-NMR experiments of A1 complexes with BnOH.     

Synthesis and structure of iron(iii) diamine-bis(phenolate) complexes

The structures and properties of six new iron(iii) diamine-bis(phenolate) complexes are reported. Reaction of anhydrous FeX(3) salts (where X = Cl or Br) with the diprotonated tripodal tetradentate ligands 2-pyridylamino-N,N-bis(2-methylene-4-methyl-6-tert-butylphenol), H(2)[L(1)], and N,N-dimethyl-N',N'-bis(2-methylene-4-methyl-6-tert-butylphenol)ethylenediamine, H(2)[L(2)], produces the trigonal bipyramidal iron(iii) complexes, [L(1)]FeCl , [L(1)]FeBr , [L(2)]FeCl and [L(2)]FeBr . Reaction of FeX(3) with the related linear tetradentate ligand N,N'-bis(4,6-tert-butyl-2-methylphenol)-N,N'-bismethyl-1,2-diaminoethane, H(2)[L(3)], generates square pyramidal iron(iii) complexes, [L(3)]FeCl and [L(3)]FeBr . Complexes have been characterized using electronic absorption spectroscopy and magnetometry. Single crystal X-ray molecular structures have been determined for complexes 1, 3, 5 and 6.     

A new branched phenanthroline derivative ligand: synthesis, solution chemistry, and crystal structures of copper(II) and zinc(II) complexes

The synthesis and characterization of the new ligand 2,9-bis[N,N-bis(2-aminoethyl)aminomethyl]-1,10-phenanthroline (L) are reported. L contains two diethylenetriamine units connected on the central nitrogen atom by a 1,10-phenanthroline group forming a symmetrical branched ligand. The basicity and binding properties of L toward Cu(II) and Zn(II) in aqueous solution were determined by means of potentiometric, UV-vis, fluorescence, and 1H and 13C NMR techniques. L behaves as pentaprotic base under the experimental conditions used; from HL+ to H4L4+ species it is the secondary amine functions that are protonated while in the H5L5+ species also the phenanthroline is involved in protonation. L does not show fluorescence properties in the range of pH (0-14) investigated. It forms both mono- and dinuclear stable species where the phenanthroline is directly involved with both nitrogens in the coordination of the first metal which is coordinated in a pentacoordination environment also by one dien unit. The other dien unit undergoes easy protonation in the mononuclear complex while it binds the second metal in the dinuclear species. For this reason, L, in providing two different binding areas for metal coordination, behaves as an unsymmetrical compartmental ligand; one area is formed by one dien unit and by the phenanthroline, and the other by the remaining dien unit. This produces unsymmetrical metal complexes both for the mono- and dinuclear species; however, the role of the binding areas is fast exchanging in aqueous solution, at least on the NMR time scale. Solution studies and the three crystal structures of the [Zn(H2L)]4+, [[Cu(H2L)](ClO4)]3+, and [[Cu2LCl2](ClO4)]+ species highlight the unsymmetrical compartmental behavior of L as well as the host properties of the complexes in adding exogenous ligands such as hydroxide, pherchlorate, and chloride anions.     

Structurally rigid bis(pyrazolyl)pyridine Zn(II) and Cu(II) complexes: Structures and kinetic studies in ring‐opening polymerization of ε‐caprolactone

Four bis(pyrazolyl)pyridine Zn(II) and Cu(II) carboxylate complexes have been structurally elucidated and used as initiators in the ring‐opening polymerization (ROP) of ε‐carprolactone (ε‐CL). Reactions of bis(3,5‐dimethyl‐pyrazol‐1‐yl)pyridine ( L1 ) with the appropriate Zn(II) and Cu(II) carboxylates afforded the corresponding complexes; [Zn(L1)(C₆H₅COO)₂] ( 1 ), [Zn(L1)(2‐Cl‐C₆H₄COO)₂] ( 2 ), [Zn(L1)(OAc)₂] ( 3 ) and [Cu(L1)(OAc)₂] ( 4 ) in moderate to good yields. Molecular structures of compounds 1 , 2 , 3 confirmed the presence of one tridentate bound ligand L1 in the metal coordination sphere and two carboxylate anions to give five coordination number around Zn(II) and Cu(II) atoms. Complexes 1 , 2 , 3 , 4 initiated the ROP of ε‐CL at 110 °C to give polymers of moderate molecular weights. Kinetic analyses of the ROP reactions indicate pseudo ‐first‐order dependency on ε‐CL monomer and initiator. ¹H NMR and mass spectral data established a coordination insertion mechanistic pathway and behaviour of 1 , 2 , 3 , 4 as initiators in the ROP of ε‐CL. Copyright © 2016 John Wiley & Sons, Ltd.     

Preparation and characterization of chitosan‐graft‐poly (ϵ‐caprolactone) with an organic catalyst

Chitosan‐graft‐poly(ϵ‐caprolactone) was prepared via the ring‐opening graft polymerization of ϵ‐caprolactone (CL) through chitosan with 4‐dimethylaminopyridine as a catalyst and water as a swelling agent. The graft content of PCL within the graft copolymer was adjusted by the feed ratio of CL to chitosan, and the highest grafting concentration of PCL was up to about 400%. Fourier transform infrared, ¹H NMR, and two‐dimensional heteronuclear single quantum coherence analyses indicated that the amino group (NH₂ CH‐2) of chitosan initiated the graft polymerization of CL through the backbone of chitosan, and the hydroxyl group (HO CH_2–6) of chitosan did not participate in initiating the graft polymerization. The percentage of amino groups initiating the graft polymerization decreased with an increasing molar ratio of CL to chitosan in the feed, and this was attributed to the fact that the graft polymerization system increasingly became heterogeneous with an increasing feed ratio of CL to chitosan. The physical properties of the graft copolymers were characterized by thermogravimetric analysis and wide‐angle X‐ray diffraction, respectively. These suggested that the introduction of PCL grafts through the chitosan backbone would to some extent destroy the crystalline structure of chitosan, and the PCL grafts existed in an amorphous structure. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 5353–5361, 2006     

聚ε-己内酯的微米硅球固定化猪胰脂肪酶促合成

本文采用微米硅球固定化猪胰脂肪酶为催化剂合成聚ε-己内酯, 以期获得具有较高分子量、 良好生物相容性和使用安全性的生物可降解医用高分子材料.     

Synthesis and supramolecular organization of amphiphilic diblock copolymers combining poly(N,N-dimethylamino-2-ethyl methacrylate) and poly(epsilon-caprolactone)

Well-defined poly(epsilon-caprolactone) (PCL)/poly(N,N-dimethylamino-2-ethyl methacrylate (PDMAEMA) diblock copolymers were synthesized, and their self-assembly was investigated as micelles both in aqueous solutions and in thin solid deposits. The synthetic approach combines controlled ring opening polymerization (ROP) of epsilon-caprolactone (CL) and atom transfer radical polymerization (ATRP) of N,N-dimethylamino-2-ethyl methacrylate (DMAEMA). Diblock copolymers were prepared by ROP of CL initiated by (Al(OiPr)3), followed by quantitative reaction of the PCL hydroxy end-groups with bromoisobutyryl bromide. The alpha-isopropyloxy omega-2-bromoisobutyrate poly(epsilon-caprolactone) (PCL-Br) obtained was used as a macroinitiator for the ATRP of DMAEMA. The molecular characterization of those diblock copolymers was performed by 1H NMR spectroscopy and gel permeation chromatography (GPC) analysis. The self-assembly of the copolymers into micellar aggregates in aqueous media was followed with dynamic light scattering (DLS), as a function of concentration and the pH. In parallel, the morphology of the solid deposits of those micelles was examined with atomic force microscopy (AFM).     

Melt crystallization and morphology of poly(ε‐caprolactone)‐poly(ethylene glycol) diblock copolymers with different compositions and molecular weights

Ring opening polymerization of ε‐caprolactone was realized in the presence of monomethoxy poly(ethylene glycol) with M_n = 1000 and 2000, using Zn(La)₂ as catalyst. The resulting PCL‐PEG diblock copolymers with CL/EO repeat unit molar ratios from 0.2 to 3.0 were characterized by using DSC, WAXD, SEC, and ¹H NMR. The crystal phase of PCL blocks exist in all polymers, and the crystallization ability of PCL blocks increases with CL/EO ratio. PEG blocks are able to crystallize for copolymers with CL/EO below 1.0 only. Melt crystallization results were analyzed with Avrami equation. The Averami exponent n is around 3.0 in most cases, in agreement with heterogeneous nucleation with three dimensional growth. The morphology of the crystals was observed by using POM. Rod‐like crystals were found to grow in 1, 3 or 2, 4 quadrants for samples with low molecular weights. In the case of a copolymer with M_n,PEG = 2000 and M_n,PCL = 800, PEG blocks could crystallize and grow on PCL crystals after PCL finished to form rod‐like crystals, leading to formation of poorly or well structured spherulites. The spherulite growth rate (G) was determined at different crystallization temperatures (T_c) ranging from 9 to 49 °C. All the copolymers present a steady G decrease with increasing crystallization temperature due to lower undercooling. On the other hand, increase of CL/EO ratio leads to increase of G in the same T_c range. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 286–293, 2010     

Tuning the activity of Zn(II) complexes in DNA cleavage: clues for design of new efficient metallo-hydrolases

The hydrolytic ability toward plasmid DNA of a mononuclear and a binuclear Zn(II) complex with two macrocyclic ligands, containing respectively a phenanthroline (L1) and a dipyridine moiety (L2), was analyzed at different pH values and compared with their activity in bis( p-nitrophenyl)phosphate (BNPP) cleavage. Only the most nucleophilic species [ZnL1(OH)]+ and [Zn2L2(OH)2]2+, present in solution at alkaline pH values, are active in BNPP cleavage, and the dinuclear L2 complex is remarkably more active than the mononuclear L1 one. Circular dichroism and unwinding experiments show that both complexes interact with DNA in a nonintercalative mode. Experiments with supercoiled plasmid DNA show that both complexes can cleave DNA at neutral pH, where the L1 and L2 complexes display a similar reactivity. Conversely, the pH-dependence of their cleavage ability is remarkably different. The reactivity of the mononuclear complex, in fact, decreases with pH while that of the dinuclear one is enhanced at alkaline pH values. The efficiency of the two complexes in DNA cleavage at different pH values was elucidated by means of a quantum mechanics/molecular mechanics (QM/MM) study on the adducts between DNA and the different complexed species present in solution.     

“Coordination‐insertion” ring‐opening polymerization of 1,4‐dioxan‐2‐one and controlled synthesis of diblock copolymers with ε‐caprolactone

This communication deals with the coordination‐insertion ring‐opening polymerization of 1,4‐dioxan‐2‐one (DX) as initiated by aluminium triisopropoxide (Al(OⁱPr)₃) either in bulk or in solution. First, polymerization of DX has been carried out in bulk at 100°C and compared to the ring‐opening polymerization promoted by tin(II)octoate. Block copolymers of ε‐caprolactone (CL) and DX have been then selectively obtained by first initiating CL polymerization with Al(OⁱPr)₃ in toluene and then adding DX to the living PCL macroinitiator solution at room temperature. In spite of the inherent poor solubility of poly(1,4‐dioxan‐2‐one) in most organic solvents, DX polymerization has proven to proceed through a “living” mechanism. Interestingly enough, the semi‐crystalline P[CL‐b‐DX] block copolymers displayed two well separated melting endotherms at ca. 55 and 102°C for PCL and PDX sequences, respectively.